Highly Efficient Utilization of Ferrate(VI) Oxidation Capacity Initiated by Mn(II) for Contaminant Oxidation: Role of Manganese Species

Enhanced oxidation and in-situ coagulation Fe(Ⅱ)/peroxymonosulfate-Mn(Ⅶ) process for carbamazepine removal: Multiple promoting effects of Mn and direct/indirect regulation of Cl- on active substances transformation

Slow transformation efficiency of Fe(III)/Fe(II) limits the generation of radicals in peroxymonosulfate (PMS)-based advanced oxidation processes (AOPs), and these radicals was easy to be interfered by the presence of water constituents. In addition, in-situ coagulation during this oxidation process was neglected. This study proposed Fe(II)/PMS-Mn(VII) in the presence of chlorides ions (FPMC) process to reveal multiple promoting effects of Mn on redox cycle of Fe(III)/Fe(II) and different reactive mechanisms of Cl- on types of radicals generation pathways, and the in-situ coagulation enhanced mechanisms was investigated. Results showed that the dual functionality of oxidation and in-situ coagulation in FPMC process was significantly enhanced that carbamazepine (CBZ) could be efficiently and quickly removed. The reduction product Mn(III) of Mn(VII) could promote the redox cycle of Mn(II)/Mn(III) and Mn(III)/Mn(IV) that facilitated Fe(III)/Fe(II), sustaining the reactivity of the system. Cl- could significantly promote the cycling of Mn(Ⅲ)/Mn(Ⅳ) that indirectly affected the cycle of Fe(III)/Fe(II).

Phenols coupled during oxidation upstream of water treatment would generate higher toxic coupling phenolic disinfection by-products during chlorination disinfection

Phenolic compounds usually produce coupling phenols during the upstream oxidation treatment of water, but the disinfection by-products (DBPs) of coupling phenols in the subsequent disinfection process have been overlooked. Herein, we demonstrated the generation and higher toxicity of these DBPs. In Songhua River water, 0.355 ng/L 4-(4-bromophenoxy)phenol and 122.67 ng/L phenol were detected. Pre-oxidation with K2FeO4 and KMnO4 resulted in the formation of 0.68 ng/L and 0.506 ng/L 4-(4-iodophenoxy)phenol in subsequent disinfection, respectively, which were 2-3 times that without pre-oxidation. Coupling of phenolic compounds during pre-oxidation and then halogenated during chlorination was shown to be the main pathway for the generation of coupling phenolic DBPs. The maximum rate constants for the reactions of hypochlorous acid with phenol and its coupling products (4-phenoxyphenol, 2,2'-biphenol, and [1,1'-biphenyl]-2,4'-diol) were 115.61 M-1s-1, 65.85 M-1s-1, 143.13 M-1s-1, and 212.52 M-1s-1, respectively, with 2,2'-biphenol and [1,1'-biphenyl]-2,4'-diol breaking through lower energy barriers and releasing more energy than phenol. This indicated coupling phenols have a higher potential to form DBPs. Additionally, coupling phenolic DBPs (4-(4-chlorophenoxy)phenol, 4-(4-bromophenoxy)phenol, and 4-(4-iodophenoxy)phenol) was 1-3 orders of magnitude more toxic than their precursors (4-phenoxyphenol, 2,2'-biphenol, [1,1'-biphenyl]-2,4'-diol, and phenol) and uncoupled DBPs (4-iodophenol). Therefore, the formation and hazards of coupling phenolic DBPs require more attention.

Degradation of 1,2,3-trichloropropane by ferrate(VI) oxidant: Mechanisms, influencing factors and oxidative iron species

The ferrate(VI) ion is a green, versatile oxidant employed eliminate organic contaminants. Research on the degradation of saturated chlorinated hydrocarbons such as 1,2,3-trichloropropane (1,2,3-TCP), by Fe(VI) is limited. In this study, we investigated the degradation of 1,2,3-TCP by Fe(VI). Four oxidants (Fe(VI), sodium persulfate, hydrogen peroxide and potassium permanganate) were also used, among which only Fe(VI) could degrade 96 % and 91 % of 1,2,3-TCP (0.33 mM) in pure- and polluted-water samples, respectively, within 4 days. During degradation, the intermediate product 2,3-dichloropropylene (2,3-DCP) was formed. The main mechanisms of 1,2,3-TCP and 2,3-DCP degradation by Fe(VI) were alkaline hydrolysis and oxidation, respectively. A higher 1,2,3-TCP degradation efficiency was achieved in an alkaline environment than in acidic or neutral environment. The reaction rate for 2,3-DCP was high at pH levels between 6.0 and 7.0, and the final degradation efficiency increased at pH 8.0-9.0. Electron paramagnetic resonance and radical quenching experiments confirmed that the dominant intermediate ferrate species (Fe(IV) and Fe(V)) were responsible for the 2,3-DCP oxidation. NH4+, Cu2+, CO32-, HCO3- and humic acid (HA) tended to inhibit the degradation of 2,3-DCP by Fe(VI). Meanwhile, the degradation of 1,2,3-TCP was slightly affected by HA, although it was considerably affected by Ca2+ and Mg2+. This study shows the great application potential of Fe(VI) in pump and treat systems for the ex-situ elimination of high-concentration chlorinated hydrocarbons.

Unique role of Mn(II) in enhancing electro-oxidation of organic pollutants on anodes with low oxygen evolution potential at low current density

This study systematically explored the role of Mn(II) in the removal of 4-chlorophenol (4-CP) by electro-oxidation (EO) employing anodes with low oxygen evolution potential (OEP), i.e., Ti/RuO2-IrO2, Ti/Pt, and Ti/Ti4O7, as well as anodes with high OEP, namely, Ti/PbO2, Ti/SnO2, and boron-doped diamond (Si/BDD). Mn(II) significantly promoted 4-CP removal on the anodes with low OEP at fairly low current density (0.04 to 1 mA/cm2), but had minimal to negative impact on those with high OEP. Cyclic voltammetry and X-ray photoelectron spectra revealed that Mn(II) was oxidized to Mn(III), then to Mn(IV) on the anodes with low OEP, whereas its was oxidized directly to Mn(IV) on those with high OEP. Deposition of manganese oxide on the anodes with low OEP suppressed oxygen evolution reaction (OER) in EO process, but enhanced OER on those with high OEP. Quenching and spectral results consistently indicated that Mn(III) and Mn(IV) were the primary species responsible for enhancing 4-CP removal on the anodes with low OEP. These findings provide mechanistic insights into the redox transformation of Mn(II) in EO and the theoretical basis for a novel strategy to boost pollutant degradation in EO systems using low OEP anodes through coupling with the redox chemistry of manganese.

MnCe-based catalysts for removal of organic pollutants in urban wastewater by advanced oxidation processes - A critical review

With Advanced oxidation processes (AOPs) widely promoted, MnCe-based catalysts have received extensive attention under the advantages of high efficiency, stability and economy for refractory organic pollutants present in urban wastewater. Driven by multiple factors such as environmental pollution, technological development, and policy promotion, a systematic review of MnCe-based catalysts is urgently needed in the current research situation. This research provides a critical review of MnCe-based catalysts for removal of organic pollutants in urban wastewater by AOPs. It is found that co-precipitation and sol-gel methods are more appropriate methods for catalyst preparation. Among a host of influence factors, catalyst composition and pH are crucial in the catalytic oxidation processes. The synergistic effect of the free radical pathway and surface catalysis results in better pollutants degradation. It is more valuable to utilize multiple systems for oxidation (e.g., photo-Fenton technology) to improve the catalytic efficiency. This review provides theoretical guidance for MnCe-based catalysts and offers a reference direction for future research in the AOPs of organic pollutants removal from urban wastewater.

Ferrate (VI) oxidation of sulfamethoxazole enhanced by magnetized sludge-based biochar: Active sites regulation and degradation mechanism analysis

Developing non radical systems for antibiotic degradation is crucial for addressing the inefficiency of conventional radical systems. In this study, novel magnetic-modified sludge biochar (MASBC) was synthesized to significantly enhance the oxidative degradation of sulfamethoxazole (SMX) by ferrate (Fe (VI)). In the Fe (VI)/MASBC system, 90.46% of SMX at a concentration of 10 μM and 49.34% of the total organic carbon (TOC) could be removed under optimal conditions of 100 μM of Fe (VI) and 0.40 g/L of MASBC within 10 min. Furthermore, the Fe (VI)/MASBC system was demonstrated with broad-spectrum removal capability towards sulfonamides in single or mixture. Quenching experiments, EPR analyses, and electrochemical experiments revealed that direct electron transfer (DET) and •O2- were mainly responsible for the removal of SMX, with functional groups (e.g., -OH, C=O) and Fe-O (redox of Fe (III)/Fe (II)) acting as the active sites, while the probe experiments showed that Fe (IV)/Fe (V) made a minor contribution to the degradation of SMX. Benefiting from the DET, the Fe (VI)/MASBC system exhibited a wide pH adaptation range (e.g., from 5.0 to 10.0) and strong anti-interference ability. The N atoms and their neighboring atoms in SMX were the prior degradation sites, with the cleavage of bond and ring opening. The degradation products showed low or non-toxicity according to ECOSAR program assessment. The removal of SMX remained within a reasonable range of 71.33%-90.46% over five consecutive cycles. Also, the Fe (VI)/MASBC system was demonstrated to be effectively applied for successful SMX removal in various water matrices, including ultrapure water, tap water, lake water, Yangtze River water, and wastewater. Therefore, this study offered new insights into the mechanism of Fe (VI) oxidation and would contribute to the efficient treatment of organic pollutants.

Understanding Variations in Ferrate Detection through the ABTS Method in the Presence of Electron-Rich Organic Compounds

The chromogenic reaction between 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) and ferrate [Fe(VI)] has long been utilized for Fe(VI) content measurement. However, the presence of electron-rich organic compounds has been found to significantly impact Fe(VI) detection using the ABTS method, leading to relative errors ranging from ∼88 to 100%. Reducing substances consumed ABTS•+ and resulted in underestimated Fe(VI) levels. Moreover, the oxidation of electron-rich organics containing hydroxyl groups by Fe(VI) could generate a phenoxyl radical (Ph•), promoting the transformation of Fe(VI) → Fe(V) → Fe(IV). The in situ formation of Fe(IV) can then contribute to ABTS oxidation, altering the ABTS•+:Fe(VI) stoichiometry from 1:1 to 2:1. To overcome these challenges, we introduced Mn(II) as an activator and 3,3',5,5'-tetramethylbenzidine (TMB) as a chromogenic agent for Fe(VI) detection. This Mn(II)/TMB method enables rapid completion of the chromogenic reaction within 2 s, with a low detection limit of approximately 4 nM and a wide detection range (0.01-10 μM). Importantly, the Mn(II)/TMB method exhibits superior resistance to reductive interference and effectively eliminates the impact of phenoxyl-radical-mediated intermediate valence iron transfer processes associated with electron-rich organic compounds. Furthermore, this method is resilient to particle interference and demonstrates practical applicability in authentic waters.

Role of bipyridyl in enhancing ferrate oxidation toward micropollutants

Enhancing Fe(VI) oxidation ability by generating high-valent iron-oxo species (Fe(IV)/Fe(V)) has attracted continuous interest. This work for the first time reports the efficient activation of Fe(VI) by a well-known aza-aromatic chelating agent 2,2'-bipyridyl (BPY) for micropollutant degradation. The presence of BPY increased the degradation constants of six model compounds (i.e., sulfamethoxazole (SMX), diclofenac (DCF), atenolol (ATL), flumequine (FLU), 4-chlorophenol (4-CP), carbamazepine (CBZ)) with Fe(VI) by 2 - 6 folds compared to those by Fe(VI) alone at pH 8.0. Lines of evidence indicated the dominant role of Fe(IV)/Fe(V) intermediates. Density functional theory calculations suggested that the binding of Fe(III) to one or two BPY molecules initiated the oxidation of Fe(III) to Fe(IV) by Fe(VI), while Fe(VI) was reduced to Fe(V). The increased exposures of Fe(IV)/Fe(V) were experimentally verified by the pre-generated Fe(III) complex with BPY and using methyl phenyl sulfoxide as the probe compound. The presence of chloride and bicarbonate slightly affected model compound degradation by Fe(VI) in the presence of BPY, while a negative effect of humic acid was obtained under the same conditions. This work demonstrates the potential of N-donor heterocyclic ligand to activate Fe(VI) for micropollutant degradation, which is instructive for the Fe(VI)-based oxidation processes.

Iron-doped carbon nanotubes with magnetic enhanced Fe(VI) degradation of arsanilic acid and inorganic arsenic: Role of intermediate iron species and electron transfer

Arsanilic acid (p-AsA), a prevalently used feed additive, is frequently detected in environment posing a great threat to humans. Potassium ferrate (Fe(VI)) was an efficient way to tackle arsenic contamination under acid and neutral conditions. However, Fe(VI) showed a noneffective removal of p-AsA under alkaline conditions due to its oxidation capacity attenuation. Herein, a magnetic iron-doped carbon nanotubes (F-CNT) was successfully prepared and further catalyzed Fe(VI) to remove p-AsA and total As species. The Fe(VI)/F-CNT system showed an excellent capability to oxidize p-AsA and adsorb total As species over an environment-related pH range of 6-9. The high-valent iron intermediates Fe(V)/Fe(IV) and the mediated electron-transfer played a significant part in the degradation of p-AsA according to the probes/scavengers experiments and galvanic oxidation process. Moreover, the situ formed iron hydroxide oxide and F-CNT significantly improved the adsorption capacity for total As species. The electron-donating groups (semiquinone and hydroquinone) and high graphitization of F-CNT were responsible for activating Fe(VI) based on the analysis of X-ray photoelectron spectroscopy (XPS). Density functional theory calculations and the detected degradation products both indicated that the amino group and the C-As bond of p-AsA were main reactive sites. Notably, Fe(VI)/F-CNT system was resistant to the interference from Cl-, SO42-, and HCO3-, and could effectively remove p-AsA and total As species even in the presence of complex water matrix. In summary, this work proposed an efficient method to use Fe(VI) for degrading pollutants under alkaline conditions and explore a new technology for livestock wastewater advanced treatment.

Enhanced removal of phenolic compounds by ferrate(VI): Unveiling the Bi(III)-Bi(V) valence cycle with in situ formed bismuth hydroxide as catalyst

The use of 2-hydroxybenzophenone (2-HBP) in personal care products is of great concern due to its potential negative effects on the ecosystem and public health. This paper presents the degradation of 2-HBP by bismuth(III) (Bi3+)-ferrate(VI) (FeVIO42-, Fe(VI)) (Bi3+-Fe(VI) system). Experimental studies at different pH and dosages of Bi3+ and Fe(VI) showed that the Bi3+-Fe(VI) system increased the degradation rate and removal efficiency of 2-HBP compared to Fe(VI) alone. The in situ formed flake-like white flocculent precipitate of Bi(OH)3 showed catalytic performance through the Bi(III)-Bi(V)-Bi(III) valence cycle which was demonstrated through spectroscopic measurements. The hydrogen transfer-mediated reactions between Fe(VI) and Bi(OH)3 as well as subsequent formation of Bi(V) were supported by performing density functional theoretical (DFT) calculations. Seventeen identified transformation products of 2-HBP by Fe(VI) with and without Bi3+ revealed hydroxylation, bond breaking, carboxylation, and polymerization reaction pathways. Significantly, Bi3+ facilitated the polymerization reaction and the dioxygen transfer-mediated hydroxylation reaction pathways. The ions (anions and cations) and humic acids (HA) present in the Bi3+-Fe(VI) system had minimal influence on the removal efficiency of 2-HBP. Reusability tests and use of real water samples as well as toxicity assessments of transformation products unveiled the practical application aspect of the Bi3+-Fe(VI) system. Finally, the results showed that the system exhibits good removal efficiency for all 12 phenolic compounds, indicating theuniversality. The Bi3+-Fe(VI) system may be an easy-to-implement cost-effective method for the catalytic degradation of benzophenones by Fe(VI).

Iron(III)-(1,10-Phenanthroline) Complex Can Enhance Ferrate(VI) and Ferrate(V) Oxidation of Organic Contaminants via Mediating Electron Transfer

Recent research has primarily focused on the utilization of reductants as activators for Fe(VI) to generate high-valent iron species (Fe(IV)/Fe(V)) for the degradation of emerging organic contaminants (EOCs). However, a significant drawback of this approach arises from the reaction between reductants and ferrates, leading to a decrease in oxidation capacity. This study introduces a novel discovery that highlights the potential of the iron(III)-(1,10-phenanthroline) (Fe(III)-Phen) complex as an activator, effectively enhancing the degradation of EOCs by Fe(VI) and augmenting the overall oxidation capacity of Fe(VI). The degradation of EOCs in the Fe(VI)/Fe(III)-Phen system is facilitated through two mechanisms: a direct electron transfer (DET) process and electron shuttle action. The DET process involves the formation of a Phen-Fe(III)-Fe(VI)* complex, which exhibits a stronger oxidation ability than Fe(VI) alone and can accept electrons directly from EOCs. On the other hand, the electron shuttle process utilizes Fe(III)-Phen as a redox mediator to transfer electrons from EOCs to Fe(VI) through the Fe(IV)/Fe(III) or Fe(IV)/Fe(II)/Fe(III) cycle. Moreover, the Fe(III)-Phen complex can improve the utilization efficiency of Fe(V) by preventing its self-decay. This study's findings may present a viable option for utilizing an effective catalyst to enhance the oxidation of EOCs by Fe(VI) and Fe(V).

Enhanced ferrate(VI) oxidation of organic pollutants through direct electron transfer

Fe(VI) is a versatile agent for water purification, and various strategies have been developed to improve its pollutant removal efficiency. Herein, it was found that in addition to intermediate iron species [Fe(IV)/Fe(V)], direct electron transfer (DET) played a significant role in the abatement of organic pollutants in Fe(VI)/carbon quantum dots (CQDs) system. Around 86, 83, 73, 64, 52, 45 and 17% of BPA, DCF, SMX, 4-CP, phenol, p-HBA, and IBP (6 μM) could be oxidized by 30 μM of Fe(VI), whereas with the addition of CQDs (4 mg/L), the oxidation ratio of these pollutants increased to 98, 99, 80, 88, 87, 66 and 57%, respectively. The negative impact induced by solution pH and background constituents on Fe(VI) abatement of pollutants could be alleviated by CQDs, and CQDs acted as catalysts for mediating DET from organic pollutants to Fe(VI). Theoretical calculation revealed that iron species [Fe(VI)/Fe(V)/Fe(IV)] was responsible for the oxidation of 36% of phenol, while DET contributed to the oxidation of 64% of phenol in the Fe(VI)/CQDs system. Compared with iron species oxidation, the CQDs mediated DET from pollutants to Fe(VI) was more efficient for utilizing the oxidation capacity of Fe(VI). The DET mechanism presented in the study provides a prospective strategy for improving the pollution control potential of Fe(VI).

Degradation of Sulfamethoxazole by Manganese(IV) Oxide in the Presence of Humic Acid: Role of Stabilized Semiquinone Radicals

In this work, we demonstrate for the first time the abatement of sulfamethoxazole (SMX) induced by stabilized ortho-semiquinone radicals (o-SQ•-) in the MnO2-mediated system in the presence of humic acid. To evaluate the performance of different MnO2/mediator systems, 16 mediators are examined for their effects on MnO2 reactions with SMX. The key role of the bidentate Mn(II)-o-SQ• complex and MnO2 surface in stabilizing SQ•- is revealed. To illustrate the formation of the Mn(II)-o-SQ• complex, electron spin resonance, cyclic voltammetry, and mass spectra were used. To demonstrate the presence of o-SQ• on the MnO2 surface, EDTA was used to quench Mn(II)-o-SQ•. The high stability of o-SQ•- on the MnO2 surface is attributed to the higher potential of o-SQ•- (0.9643 V) than the MnO2 surface (0.8598 V) at pH 7.0. The SMX removal rate constant by different stabilized o-SQ• at pH 7.0 ranges from 0.0098 to 0.2252 min-1. The favorable model is the rate constant ln (kobs, 7.0) = 6.002EHOMO(o-Qred) + 33.744(ELUMO(o-Q) - EHOMO(o-Qred)) - 32.800, whose parameters represent the generation and reactivity of o-SQ•, respectively. Moreover, aniline and cystine are competitive substrates for SMX in coupling o-SQ•-. Due to the abundance of humic constituents in aquatic environments, this finding sheds light on the low-oxidant-demand, low-carbon, and highly selective removal of sulfonamide antibiotics.

Fast degradation of atrazine by nZVI-Cu0/PMS: Re-evaluation and quantification of reactive species, generation pathways, and application feasibility

Additive metal to zero-valent iron (ZVI) could enhance the reduction ability and the additive Cu0 was incorporated to ZVI to accelerate PMS activation with atrazine (ATZ) as target compound. The efficiencies of ATZ degradation and PMS decomposition climbed up firstly and then declined as Cu0 loading increased from 0.01 to 1.00 wt% with the maximums at 0.10 wt%. SO4•-, HO•, Fe(IV), O2•- and 1O2 were generated by nZVI-Cu0/PMS based on the results of electron paramagnetic resonance (EPR) and simultaneous degradation of nitrobenzene, ATZ, and methyl phenyl sulfoxide (PMSO). The rate constant of Fe(IV) and ATZ was estimated as 7 × 104 M-1∙s-1 via the variation of methyl phenyl sulfone (PMSO2)formation at different ATZ concentrations. However, Fe(IV) contributed negligibly to ATZ degradation due to the strong scavenging of Fe(IV) by PMS. SO4•- and HO• were the reactive species responsible for ATZ degradation and the yield ratio of SO4•- and HO• was about 8.70 at initial stage. Preliminary thermodynamic calculation on the possible activation ways revealed that the dominant production of SO4•- might originate from the atomic H reduction of PMS in the surface layer of nZVI-Cu0. Ten products of ATZ degradation were identified by HPLC/ESI/QTOF and the possible degradation pathways were analyzed combined with theoretical calculation on ATZ structure. The decrease of temperature or increase of solution pH led to the decline of ATZ degradation, as well as the individual addition of common ions (HCO3-, Cl-, SO42-, NH4+, NO3- and F-) and natural organic matters (NOM). In real water, ATZ was still efficiently degraded with the decontamination efficiency decreasing in the sequence of tap water > surface water > simulated wastewater > groundwater. For the treatment of ATZ-polluted continuous flow, nZVI-Cu0 in double-layer layout had a higher capacity than the single-layer mode. Meanwhile, the leaching TFe and TCu were limited. The results indicate nZVI-Cu0/PMS is applicable and the multiple-layer layout of nZVI-Cu0 is suggested for ATZ-polluted ground water and soil remediation.

Key role of Fe(VI)-activated Bi2WO6 in the photocatalytic oxidation of sulfonamides: Mediated electron transfer mechanism

The widespread use of sulfonamides (SAs) in animals and human infections has raised significant concerns regarding their presence in ambient waterways and potential for inducing antimicrobial resistance. Herein, we report on the capacity of ferrate (VI) (Fe^VIO₄^2-, Fe(VI)) to facilitate the photocatalytic degradation of sulfamethazine (SMT) via bismuth tungstate (Bi₂WO₆, BWO) under blue LED light (Vis/BWO/Fe(VI)) exposure, at rates that were 45-fold faster than BWO photocatalysis. Both the stepwise and time-series addition of Fe(VI) contributed to the degradation. Multiple lines of evidence confirmed that the common reactive species (RSs) in BWO-based photocatalytic systems and Fe(VI)-involved systems (e.g., •OH/h⁺, O₂^•-, ¹O₂ and Fe(V)/Fe(IV)) played subtle roles in our study system. Herein, for the first time, it was discovered that the precursor complex (BWO-Fe(V)/Fe(IV)* )) was the main contributor to induce electron transfer of SAs through the "conductive bridge" effect of BWO. The studied system was able to effectively degrade SMT in synthetic hydrolyzed urine (SHU) with low interference from background substances in water. This work not only offers a novel facilitation strategy for BWO, but also holds a great application prospect for contamination remediation in urine.

Influence of Humic Acids on the Removal of Arsenic and Antimony by Potassium Ferrate

Although the removal ability of potassium ferrate (K₂FeO₄) on aqueous heavy metals has been confirmed by many researchers, little information focuses on the difference between the individual and simultaneous treatment of elements from the same family of the periodic table. In this project, two heavy metals, arsenic (As) and antimony (Sb) were chosen as the target pollutants to investigate the removal ability of K₂FeO₄ and the influence of humic acid (HA) in simulated water and spiked lake water samples. The results showed that the removal efficiencies of both pollutants gradually increased along the Fe/As or Sb mass ratios. The maximum removal rate of As(III) reached 99.5% at a pH of 5.6 and a Fe/As mass ratio of 4.6 when the initial As(III) concentration was 0.5 mg/L; while the maximum was 99.61% for Sb(III) at a pH of 4.5 and Fe/Sb of 22.6 when the initial Sb(III) concentration was 0.5 mg/L. It was found that HA inhibited the removal of individual As or Sb slightly and the removal efficiency of Sb was significantly higher than that of As with or without the addition of K₂FeO₄. For the co-existence system of As and Sb, the removal of As was improved sharply after the addition of K₂FeO₄, higher than Sb; while the latter was slightly better than that of As without K₂FeO₄, probably due to the stronger complexing ability of HA and Sb. X-ray energy dispersive spectroscopy (EDS), X-ray diffractometer (XRD), and X-ray photoelectron spectroscopy (XPS) were used to characterize the precipitated products to reveal the potential removal mechanisms based on the experimental results.