Enhanced Biological Trace Organic Contaminant Removal: A Lab-Scale Demonstration with Bisphenol A-Degrading Bacteria Sphingobium sp. BiD32

A targeted review on occurrence, remediation, and risk assessments of bisphenol A in Africa

Bisphenol A (BPA) is a vital raw material used to manufacture various household and commercial goods. However, BPA is a contaminant of emerging concern (CEC) and an endocrine-disrupting chemical (EDC) capable of migrating and bio-accumulating in environmental and biological compartments. At threshold levels, they become toxic causing adverse health and environmental issues. BPA's occurrence in food, food contact materials (FCMs), beverages, water, cosmetics, consumer goods, soil, sediments, and human/biological fluids across Africa was outlined. Unlike most reviews, it further collated data on BPA remediation techniques, including the human and ecological risk assessment studies conducted across Africa. A systematic scrutiny of the major indexing databases was employed extracting relevant data for this study. Results reveal that only 10 out of 54 countries have researched BPA in Africa. BPA levels in water were the most investigated, whereas levels in cosmetics and consumer goods were the least studied. Maximum BPA concentrations found in Africa were 3,590,000 ng/g (cosmetic and consumer goods), 154,820,000 ng/g (soils), 189 ng/mL (water), 1139 ng/g (food), and 208.55 ng/mL (biological fluids). The optimum percentage removal/degradation of BPA was within 70-100%. The potential health and ecological risk levels were assessed by comparing them with recommended limits and were found to fall within safe/low risks to unsafe/high risks. In conclusion, this study revealed that there is still little research on BPA in Africa. Levels detected in some matrices call for increased research, stricter health and environmental regulations, and surveillance.

Biodegradation of phenolic pollutants and bioaugmentation strategies: A review of current knowledge and future perspectives

The widespread use of phenolic compounds renders their occurrence in various environmental matrices, posing ecological risks especially the endocrine disruption effects. Biodegradation-based techniques are efficient and cost-effective in degrading phenolic pollutants with less production of secondary pollution. This review focuses on phenol, 4-nonylphenol, 4-nitrophenol, bisphenol A and tetrabromobisphenol A as the representatives, and summarizes the current knowledge and future perspectives of their biodegradation and the enhancement strategy of bioaugmentation. Biodegradation and isolation of degrading microorganisms were mainly investigated under oxic conditions, where phenolic pollutants are typically hydroxylated to 4-hydroxybenzoate or hydroquinone prior to ring opening. Bioaugmentation efficiencies of phenolic pollutants significantly vary under different application conditions (e.g., increased degradation by 10-95% in soil and sediment). To optimize degradation of phenolic pollutants in different matrices, the factors that influence biodegradation capacity of microorganisms and performance of bioaugmentation are discussed. The use of immobilization strategy, indigenous degrading bacteria, and highly competent exogenous bacteria are proposed to facilitate the bioaugmentation process. Further studies are suggested to illustrate 1) biodegradation of phenolic pollutants under anoxic conditions, 2) application of microbial consortia with synergistic effects for phenolic pollutant degradation, and 3) assessment on the uncertain ecological risks associated with bioaugmentation, resulting from changes in degradation pathway of phenolic pollutants and alterations in structure and function of indigenous microbial community.

Removal of thallium by MnOx coated limestone sand filter through regeneration of KMnO4: Combination of physiochemical and biochemical actions

Treatment of industrial thallium(Tl)-containing wastewater is crucial for mitigating environmental risks and health threats associated with this toxic metal. The incorporation of Mn oxides (MnOx) into the filtration system is a promising solution for efficient Tl(I) removal. However, further research is needed to elucidate the underlying mechanism behind MnOx-enhanced filtration and the rules of its stable operation. In this study, limestone, a cost-effective material, was selected as the filter media. Raw water with Mn(II), Tl(I), and other pollutants was prepared after a thorough investigation of actual industrial wastewater conditions. KMnO4 was added to induce the formation of MnO2 on limestone surfaces, while long-term operation led to enrichment of manganese oxidizing microorganisms (MnOM). Results revealed a dual mechanism. Firstly, most Mn(II) were oxidized by KMnO4 to form MnO2 attaching to limestone sands, and both Tl(I) and residual Mn(II) were adsorbed onto the newly formed MnO2. Subsequently, enzymes secreted by MnOM facilitated oxidation of remaining Mn(II), resulting in the generation of biogenic manganese oxides (BioMnOx) with numerous vacancies during long-term operation. The generated BioMnOx not only adsorbed Mn(II) and Tl(I) but also promoted their oxidation process. This approach offers an effective and sustainable method for removing both Mn(II) and Tl(I) from industrial wastewater, thereby addressing the challenges posed by thallium-contaminated effluents.

The microbial removal of bisphenols in aquatic microcosms and associated alteration in bacterial community

The concept of the study resulted from numerous concerns around bisphenol A (BPA) and bisphenol S (BPS) in aquatic environments. In this study, river water and sediment microcosms highly polluted with bisphenols and bioaugmented with two BPs-removing bacterial strains were constructed. The study aimed to determine the rate of high-concentrated BPA and BPS (BPs) removal from river water and sediment microniches, and the effect of water bioaugmentation with bacterial consortium on the removal rates of these pollutants. Moreover, the impact of introduced strains and exposure to BPs on the structural and functional composition of the autochthonous bacterial communities was elucidated. Our findings indicate that the removal activity of autochthonous bacteria was sufficient for effectively BPA elimination and reducing BPS content in the microcosms. The number of introduced bacterial cells decreased continuously until day 40, and on consecutive sampling days, no bioaugmented cells were detected. Sequencing analysis of the total 16S rRNA genes revealed that the community composition in bioaugmented microcosms amended with BPs differed significantly from those treated either with bacteria or BPs. A metagenomic analysis found an increase in the abundance of proteins responsible for xenobiotics removal in BPs-amended microcosms. This study provides new insights into the effects of bioaugmentation with a bacterial consortium on bacterial diversity and BPs removal in aquatic environments.

Treatment of triclosan through enhanced microbial biodegradation

Triclosan (TCS) is extensively used in healthcare and personal care products as an antibacterial agent. Due to the persistent and toxic nature of TCS, it is not completely degraded in the biological wastewater treatment process. In this research work, identification of TCS degrading bacteria from municipal wastewater sludge and applying the same as bioaugmentation treatment for wastewater have been reported. Based on the 16S rRNA analysis of wastewater sludge, it was found that Providencia rettgeri MB-IIT strain was active and able to grow in higher TCS concentration. The identified bacterial strain was able to use TCS as carbon and energy source for its growth. The biodegradation experiment was optimized for the operational parameters viz. pH (5-10), inoculum size (1-5% (v/v)) and different initial concentration (2, 5, and 10 mg/L) of TCS. During the TCS degradation process, manganese peroxidase (MnP) and laccase (LAC) enzyme activity and specific growth rate of P. rettgeri strain were maximum at pH=7% and 2% (v/v) inoculum size, resulting in 98% of TCS removal efficiency. A total of six intermediate products were identified from the Liquid chromatography-high-resolution mass spectrometry (LC-HRMS) analysis, and the two mechanisms responsible for the degradation of TCS have been elucidated. The study highlights that P. rettgeri MB-IIT strain could be advantageously used to degrade triclosan present in the wastewater.

Combined bioaugmentation with electro-biostimulation for improved bioremediation of antimicrobial triclocarban and PAHs complexly contaminated sediments

Haloaromatic antimicrobial triclocarban (TCC) is an emerging refractory contaminant that commonly coexisted with conventional contaminants such as polycyclic aromatic hydrocarbons (PAHs). TCC may negatively affect the metabolic activity of sediment microorganisms and persist in environment; however, remediation methods that relieve the TCC inhibitory effect in sediments remain unknown. Here, a novel electro-biostimulation and bioaugmentation combined remediation system was proposed by the simultaneous introduction of a TCC-degrading Ochrobactrum sp. TCC-2 and electrode into the TCC and PAHs co-contaminated sediments. Results indicated the PAHs and TCC degradation efficiencies of the combined system were 2.9-3.0 and 4.6 times respectively higher than those of the control group (no electro-biostimulation and no bioaugmentation treatments). The introduced strain TCC-2 and the enriched electroactive bacteria and PAHs degraders (e.g. Desulfobulbus, Clostridium, and Paenarthrobacter) synergistically contributed to the accelerated degradation of PAHs and TCC. The preferential elimination of the TCC inhibitory effect through bioaugmentation treatment could restore microbial functions by increasing the functional gene abundances related to various metabolic processes. This study offers new insights into the response of sediment functional communities to TCC stress, electro-biostimulation and bioaugmentation operations and provides a promising system for the enhanced bioremediation of the PAHs and TCC co-contaminated sediments.

Characterization of vB_StuS_MMDA13, a Newly Discovered Bacteriophage Infecting the Agar-Degrading Species Sphingomonas turrisvirgatae

Members of Sphingomonas genus have gained a notable interest for their use in a wide range of biotechnological applications, ranging from bioremediation to the production of valuable compounds of industrial interest. To date, knowledge on phages targeting Sphingomonas spp. are still scarce. Here, we describe and characterize a lytic bacteriophage, named vB_StuS_MMDA13, able to infect the Sphingomonas turrisvirgatae MCT13 type strain. Physiological characterization demonstrated that vB_StuS_MMDA13 has a narrow host range, a long latency period, a low burst size, and it is overall stable to both temperature and pH variations. The phage has a double-stranded DNA genome of 63,743 bp, with 89 open reading frames arranged in two opposite arms separated by a 1186 bp non-coding region and shows a very low global similarity to any other known phages. Interestingly, vB_StuS_MMDA13 is endowed with an original nucleotide modification biosynthetic gene cluster, which greatly differs from those of its most closely related phages of the Nipunavirus genus. vB_StuS_MMDA13 is the first characterized lytic bacteriophage of the Siphoviridae family infecting members of the Sphingomonas genus.

Assessing the efficiency in assisted depuration of coffee processing wastewater from mixed wild microbial selected inoculum

This work evaluated the efficiency of bacterial bio-augmentation to the biological treatment of coffee processing wastewater (CPWW) in a pilot wastewater treatment plant (WTP). Biochemical oxygen demand (BOD) and chemical oxygen demand (COD) values were the basis for the treatment efficiency. Serratia marcescens CCMA 1010 and CCMA 1013, Corynebacterium flavescens CCMA 1006 and Acetobacter indonesiensis CCMA 1002 were previously selected. The microbial cocktail was inoculated and persisted in CPWW during all treatments. The richness of wild species was a little altered over time and up to nine species were found in each sampled season. The microbiota composition presented variation of a total of 13 species, despite the inoculation of the microbial inoculum. The biodegradability index of effluent, close to 0.5, was favourable to biological treatment. The pollution parameters of CPWW were decreased in function of the variation of community composition and microbial activity. The greatest reduction of BOD (~ 33%) and COD (~ 25%) was observed between 72 h and 8 days of the biological treatment. The CPWW toxicity in Allium cepa seeds was lower by up to 60%, and the germination index (GI) exceeded 100% in the treated CPWW. The results of the CPWW biological treatment by bio-augmentation from native micro-organisms in the pilot-scale WTP indicated the greatest efficiency relating to the spontaneous biological treatment of CPWW. After this treatment, the discharge of effluent in the environment would not have toxic effects on the plants.

Impact of primary carbon sources on microbiome shaping and biotransformation of pharmaceuticals and personal care products

Knowledge of the conditions that promote the growth and activity of pharmaceutical and personal care product (PPCP)-degrading microorganisms within mixed microbial systems are needed to shape microbiomes in biotreatment reactors and manage process performance. Available carbon sources influence microbial community structure, and specific carbon sources could potentially be added to end-of-treatment train biotreatment systems (e.g., soil aquifer treatment [SAT]) to select for the growth and activity of a range of microbial phylotypes that collectively degrade target PPCPs. Herein, the impacts of primary carbon sources on PPCP biodegradation and microbial community structure were explored to identify promising carbon sources for PPCP biotreatment application. Six types of primary carbon sources were investigated: casamino acids, two humic acid and peptone mixtures (high and low amounts of humic acid), molasses, an organic acids mixture, and phenol. Biodegradation was tracked for five PPCPs (diclofenac, 5-fluorouracil, gemfibrozil, ibuprofen, and triclosan). Primary carbon sources were found to differentially impact microbial community structures and rates and efficiencies of PPCP biotransformation. Of the primary carbon sources tested, casamino acids, organic acids, and phenol showed the fastest biotransformation; however, on a biomass-normalized basis, both humic acid-peptone mixtures showed comparable or superior biotransformation. By comparing microbial communities for the different primary carbon sources, abundances of unclassified Beijerinckiaceae, Beijerinckia, Sphingomonas, unclassified Sphingomonadaceae, Flavobacterium, unclassified Rhizobiales, and Nevskia were statistically linked with biotransformation of specific PPCPs.

Oxygen Half-Saturation Constants for Pharmaceuticals in Activated Sludge and Microbial Community Activity under Varied Oxygen Levels

Aeration accounts for the largest energy demand in conventional activated sludge wastewater treatment. Emerging aeration control strategies for energy conservation have significantly reduced operational bulk liquid dissolved oxygen (DO) from above 2 mg/L to at or below 0.5 mg/L. As we move toward low DO treatment processes, there is a need to understand how low DO impacts the kinetics of micropollutant biotransformation. The objective of this study was to characterize the impact of DO concentration on pharmaceutical biotransformation rates via two approaches: (1) Determine oxygen half saturation constants that describe the community-wide impact of DO on biotransformation rates. (2) Evaluate shifts in the microbial community 16S rRNA pool due to DO concentration. Batch experiments were performed at several DO concentrations using biomass from a full-scale wastewater treatment plant. Results reveal that substantial reductions in bulk liquid DO concentrations to 0.5 mg-O₂/L are possible without compromising pharmaceutical biotransformation rates. Sequencing of cDNA generated from community rRNA revealed that diverse, low abundance community members may play important roles in pharmaceutical transformation. The results of this work advance our ability to predict and model the impact of DO on pharmaceutical biotransformations during wastewater treatment and identify taxonomic groups associated with those biotransformations.

Enhanced bioelectroremediation of a complexly contaminated river sediment through stimulating electroactive degraders with methanol supply

Bioelectroremediation is an efficient, sustainable, and environment-friendly remediation technology for the complexly contaminated sediments. Although various recalcitrant pollutants could be degraded in the electrode district, the degradation efficiency was generally confined by the low total organic carbon (TOC) content in the sediment. How to enhance the electroactive degraders' activity and efficiency remain poorly understood. Here we investigated the bioeletroremediation of a complexly contaminated river sediment with low TOC in a cylindric sediment microbial fuel cell stimulated by methanol. After 200 days treatment, the degradation efficiencies of total petroleum hydrocarbons (TPH), polycyclic aromatic hydrocarbons (PAH), and cycloalkenes (CYE) in the electrode district with methanol stimulation were 1.45-4.38 times higher compared with those in the non-electrode district without methanol stimulation. The overall electrode district communities were significantly positively correlated with the variables of the enhanced TPH, PAH, CYE and TOC degradation efficiencies (p < .01). The joint electrical and exogenous methanol stimulation selectively enriched electroactive degraders (Geobacter and Desulfobulbus) in the anode biofilms, and their proportion was markedly positively correlated with the characteristic and total pollutants degradation efficiencies (p < .001). This study offers a new insight into the response of key electroactive degraders to the joint stimulation process.

Microbial community structure in aerobic and fluffy granules formed in a sequencing batch reactor supplied with 4-chlorophenol at different settling times

Toxic compounds, such as 4-chlorophenol (4-CP), which is a common pollutant in wastewater, are removed efficiently from sequencing batch reactors (SBRs) by microorganisms. The bacterial community in aerobic granules formed during the removal of 4-CP in a SBR was monitored for 63days. The SBR reactor was operated with a constant filling and withdrawal time of 7 and 8min and decreasing settling time (30, 5, 3 and 2min) to induce the formation of aerobic granules. During the acclimation period lasting 15days (30min settling time) had a strong effect on the bacterial community. From day 18 onwards, Sphingobium and Comamonadaceae were detected. Rhizobiaceae were dominant from day 24 to day 28 when stable aerobic granules were formed. At day 35, fluffy granules were formed, but the bacterial community structure did not change, despite the changes in the reactor operation to inhibit filamentous bacteria growth. This is the first report on changes in the bacterial community structure of aerobic and fluffy granules during granulation process in a reactor fed with 4-CP and the prediction of its metabolic pathways.

The first characterized phage against a member of the ecologically important sphingomonads reveals high dissimilarity against all other known phages

This study describes the first molecular characterization of a bacteriophage infecting a member of the environmentally important Sphingomonadaceae family. Both bacteriophage Lacusarx and its host Sphingobium sp. IP1 were isolated from activated sludge from a wastewater treatment plant. Genome sequencing revealed that the phage genes display little similarity to other known phages, despite a remarkable conservation of the synteny in which the functional genes occur among distantly related phages. Phylogenetic analyses confirmed that Lacusarx represents a hitherto undescribed genus of phages. A classical lysis cassette could not be identified in Lacusarx, suggesting that the genes encoding endolysin, holin, and spanin are host-specific and not found in phages infecting other bacteria. The virus harbors 24 tRNA genes corresponding to 18 different amino acids and furthermore has a significantly different codon usage than its host. Proteomic analysis of Lacusarx revealed the protein components of the phage particle. A lysogeny test indicated that Lacusarx is not a temperate phage.

Functional Characterization of a Novel Amidase Involved in Biotransformation of Triclocarban and its Dehalogenated Congeners in Ochrobactrum sp. TCC-2

Haloaromatic antimicrobial triclocarban (3,4,4'-trichlorocarbanilide, TCC) is a refractory contaminant which is frequently detected in various aquatic and sediment environments globally. However, few TCC-degrading communities or pure cultures have been documented, and functional enzymes involved in TCC biodegradation hitherto have not yet been characterized. In this study, a bacterial strain, Ochrobactrum sp. TCC-2, capable of degrading TCC under both aerobic and anaerobic conditions was isolated from a sediment sample. A novel amidase gene (tccA), responsible for the hydrolysis of the two amide bonds of TCC and its dehalogenated congeners 4,4'-dichlorocarbanilide (DCC) and carbanilide (NCC) to more biodegradable chloroaniline or aniline products, was cloned and characterized. TccA shares low amino acid sequence identity (27 to 38%) with other biochemically characterized amidases and contains the conserved catalytic triad (Ser-Ser-Lys) of the amidase signature enzyme family. TccA was stable over a pH range of 5.0 to 10.0 and at temperatures lower than 60 °C, and it was constitutively expressed in strain TCC-2. In contrast to the halogenated TCC and DCC, the nonchlorinated NCC was the preferred substrate for TccA. TccA also had hydrolysis activity to a broad spectrum of amide bonds in herbicides, insecticides, and chemical intermediates. The constitutive expression and broad substrate spectrum of TccA suggested strain TCC-2 may be potentially useful for bioremediation applications.