Surfactant-Wrapped Multiwalled Carbon Nanotubes in Aquatic Systems: Surfactant Displacement in the Presence of Humic Acid

The influence of environmental factor on the coagulation enhanced ultrafiltration of algae-laden water: Role of two anionic surfactants to the separation performance

With the acceleration of urbanization and the improvement of people's living standards, more chemicals that humans rely on are entering the city and surrounding water bodies. Anionic surfactants are one of the essential products for human beings. It is also one of the inducements that cause the eutrophication. The algae-laden water caused by eutrophication is a headache in the traditional water treatment process. To solve the problem, ultrafitration combined process was widely investigated to treat the algae-laden water. The presence of stimuli, low concentration anionic surfactant, probably interfere the performance of ultrafiltration process during algae-laden water treatment. In this study, the influence of two typical anionic surfactants, sodium dodecyl sulfate (SDS) and sodium dodecyl benzene sulfonate (LAS), on the performance of coagulation-enhanced ultrafiltration was investigated. The aluminum sulfate hydrate and iron sulfate hydrate were respectively employed as coagulant. Based on the residual turbidity and zeta potential, 4 mg/L Al and 8 mg/L Fe were determined as the optimal coagulant dosage. The floc morphology confirmed that Al-algae flocs with lower fractal dimension (D_f) were looser and more porous compared to Fe-algae flocs. More coagulant was depleted by LAS due to the better hydrophobicity of LAS. During the filtration process, LAS caused a larger flux reduction compared with SDS regardless of the coagulant that was used. More organic compounds penetrate into membrane pores and block the pores with the presence of LAS since algal cell aggregation was weakened. Finally, the rejection of organic compounds by the coagulation-enhanced ultrafiltration process was studied, and the co-existing surfactants can cause effluent deterioration. Therefore, the presence of surfactants has a negative effect to the ultrafiltration treatment of algae-laden water.

Review of aquatic toxicity of pharmaceuticals and personal care products to algae

Pharmaceuticals and Personal Care Products (PPCPs) have been frequently detected in the environment around the world. Algae play a significant role in aquatic ecosystem, thus the influence on algae may affect the life of higher trophic organisms. This review provides a state-of-the-art overview of current research on the toxicity of PPCPs to algae. Nanoparticles, contained in personal care products, also have been considered as the ingredients of PPCPs. PPCPs could cause unexpected effects on algae and their communities. Chlorophyta and diatoms are more accessible and sensitive to PPCPs. Multiple algal endpoints should be considered to provide a complete evaluation on PPCPs toxicity. The toxicity of organic ingredients in PPCPs could be predicted through quantitative structure-activity relationship model, whereas the toxicity of nanoparticles could be predicted with limitations. Light irradiation can change the toxicity through affecting algae and PPCPs. pH and natural organic matter can affect the toxicity through changing the existence of PPCPs. For joint and tertiary toxicity, experiments could be conducted to reveal the toxic mechanism. For multiple compound mixture toxicity, concentration addition and independent addition models are preferred. However, there has no empirical models to study nanoparticle-contained mixture toxicity. Algae-based remediation is an emerging technology to prevent the release of PPCPs from water treatment plants. Although many individual algal species are identified for removing a few compounds from PPCPs, algal-bacterial photobioreactor is a preferable alternative, with higher chances for industrial applications.

Global variation in freshwater physico-chemistry and its influence on chemical toxicity in aquatic wildlife

Chemical pollution is one of the major threats to global freshwater biodiversity and will be exacerbated through changes in temperature and rainfall patterns, acid-base chemistry, and reduced freshwater availability due to climate change. In this review we show how physico-chemical features of natural fresh waters, including pH, temperature, oxygen, carbon dioxide, divalent cations, anions, carbonate alkalinity, salinity and dissolved organic matter, can affect the environmental risk to aquatic wildlife of pollutant chemicals. We evidence how these features of freshwater physico-chemistry directly and/or indirectly affect the solubility, speciation, bioavailability and uptake of chemicals [including via alterations in the trans-epithelial electric potential (TEP) across the gills or skin] as well as the internal physiology/biochemistry of the organisms, and hence ultimately toxicity. We also show how toxicity can vary with species and ontogeny. We use a new database of global freshwater chemistry (GLORICH) to demonstrate the huge variability (often >1000-fold) for these physico-chemical variables in natural fresh waters, and hence their importance to ecotoxicology. We emphasise that a better understanding of chemical toxicity and more accurate environmental risk assessment requires greater consideration of the natural water physico-chemistry in which the organisms we seek to protect live.

Small organic molecules act as a trigger in an "unzippering" mechanism to facilitate carbon nanotube dispersion

In binary dispersing agents system, the contribution and roles of different sized molecules to carbon nanotubes (CNTs) dispersion remain unclear, which hinders the understanding of the environmental behaviour and risks of CNTs. This study compared the dispersion of CNTs by m-nitrobenzoic acid (NBA), trans-cinnamic acid (TCA), tannic acid (TA), and their mixtures. The dispersion efficiency of CNTs significantly reduced with the increased solid-phase concentration (Q_e) of TA due to the adsorption of TA on newly exposed CNTs surfaces. However, the CNTs dispersion efficiency by NBA or TCA was independent of Q_e because the dispersed CNTs surface was completely occupied by NBA or TCA without new exposed sites available for subsequent adsorption. The mixture of NBA or TCA with TA significantly enhanced the dispersion efficiency of CNTs, indicating a synergistic effect of CNTs dispersion. The addition of NBA or TCA decreased the hydrodynamic diameter of CNTs dispersed by TA, which indicated that NBA or TCA facilitated TA wedging into CNTs bundles for more complete separation of CNTs. This study highlighted the triggering effect of small molecules in the "unzippering" mechanism for improving the dispersing efficiency of CNTs by large molecules.

Strong influence of surfactants on virgin hydrophobic microplastics adsorbing ionic organic pollutants

Microplastic (MP) pollution has become an area of increasing concern because MPs accumulate various types of pollutants. Many previous studies have explored the interactions between MPs and hydrophobic pollutants. However, little research has been conducted on hydrophilic pollutants, which are of much higher concentration and ubiquitous in environment. Surfactants cause hydrophobic MPs to become hydrophilic, which may significantly enhance their capacities to adsorb hydrophilic pollutants. This study explored the influence of co-existing surfactants on the adsorption of ionic organic pollutants by MPs, and found that the presence of an ionic surfactant could significantly enhance the capacity of polyvinyl chloride (PVC, 0.2 mm) MPs to adsorb pollutants with opposite charges. The Langmuir methylene blue adsorption capacity of PVC could be increased from 172 to 4417 ppm in the presence of a sodium dodecyl benzene sulfonate surfactant. Nonionic surfactants impeded the adsorption of both cationic and anionic pollutants due to the steric resistance of the hydrophilic polyethelene glycol chains. The electrostatic interaction mechanism dominated the interfacial behaviors of ionic pollutants on surfactant-adsorbed MP interfaces. The effects of the surfactants were further verified using four different model pollutants and six surfactants. The adsorption capacities of real environmental MPs, including PVC, polyethylene (PE), polypropylene (PP), and polystyrene (PS), increased by three to twenty-six times. The adsorption properties of MPs may be determined by the presence of co-existing surfactants, rather than their polymer species or additives.

The Crucial Role of Environmental Coronas in Determining the Biological Effects of Engineered Nanomaterials

In aquatic environments, a large number of ecological macromolecules (e.g., natural organic matter (NOM), extracellular polymeric substances (EPS), and proteins) can adsorb onto the surface of engineered nanomaterials (ENMs) to form a unique environmental corona. The presence of environmental corona as an eco-nano interface can significantly alter the bioavailability, biocompatibility, and toxicity of pristine ENMs to aquatic organisms. However, as an emerging field, research on the impact of the environmental corona on the fate and behavior of ENMs in aquatic environments is still in its infancy. To promote a deeper understanding of its importance in driving or moderating ENM toxicity, this study systemically recapitulates the literature of representative types of macromolecules that are adsorbed onto ENMs; these constitute the environmental corona, including NOM, EPS, proteins, and surfactants. Next, the ecotoxicological effects of environmental corona-coated ENMs on representative aquatic organisms at different trophic levels are discussed in comparison to pristine ENMs, based on the reported studies. According to this analysis, molecular mechanisms triggered by pristine and environmental corona-coated ENMs are compared, including membrane adhesion, membrane damage, cellular internalization, oxidative stress, immunotoxicity, genotoxicity, and reproductive toxicity. Finally, current knowledge gaps and challenges in this field are discussed from the ecotoxicology perspective.

Surfactant stealth effect of microplastics in traditional coagulation process observed via 3-D fluorescence imaging

Microplastics (MPs) have aroused rising social concerns. Although amounts of surfactants exist in wastewater and are expected to alter the surface properties of MPs significantly as they are designed to be adsorbed by hydrophobic particles. However, rare works have been done on the influence of surfactants on the coagulation removal process of MPs which was thought to be an effective way to remove MPs together with other natural particles, such as clay. We used 3-D fluorescence imaging to track the coagulation removal process of polystyrene MPs. Our results indicate that nonionic surfactant, tween 20 in ppm scale, could inhibit the coagulation removal of polystyrene MPs significantly. Residue MPs in the effluent is proportional with the surfactant concentration and increases up to tens of times, which will lead to a dramatic increase in their potential environmental risks. Apparent size effect exists in the coagulation in which smaller MPs can escape from the coagulation removal more easily. Mechanism study suggests that the steric resistance of the hydrophilic flexible polyethylene glycol (PEG) layer formed by tween 20 adsorbed on MP surface inhibits clay deposition and thus hinders subsequent agglomeration and precipitation. A surfactant stealth effect, which is used in the design of nanomedicine to avoid the human immune recognition and clearance of nano-drugs from blood circulation, also exists in the coagulation removal process of MPs. Our finding not only proves the strong influence of surfactants on MPs but also will stimulate related studies on other latent surfactant effects of MPs.

The mechanisms and environmental implications of engineered nanoparticles dispersion

Dispersion of engineered nanoparticles (ENPs) has drawn special research attentions because the environmental behavior, risks, and applications of ENPs are greatly dependent on their dispersing status. This review summarizes the latest research progress of dispersion mechanisms, environmental applications in contaminants adsorption, and toxicity of ENPs dispersed in liquid and in solid matrix (3D-ENPs). Dispersion mechanisms of ENPs, including steric hindrance, electrostatic repulsion and "micelle wrapping" are well understood in single dispersing agent, however, the prediction of ENPs dispersion in real environments is not straightforward because of the diversity of structures, components, and properties of natural organic molecule mixtures. The adsorption characteristics, depending on the exposed surface areas in liquid, are significantly different between dispersed and aggregated ENPs. Comparing with the aggregated ENPs, the toxicity of dispersed ENPs is generally enhanced due to the increased uptake, released metal ions, carried contaminants, and induced ROS. 3D-ENPs not only inherit the excellent adsorption performance of ENPs dispersed in liquid, but also are beneficial to the separation and recycle from aqueous solutions due to their 3D rigid structures. However, the adsorption mechanisms as affected by environmental conditions are still unclear. Additionally, the potential risks of 3D-ENPs should be paid more attentions, with an emphasis on free radicals and stability of 3D structure.

Dynamics of microbial community in the bioreactor for bisphenol S removal

Bisphenol S is one of the alternative substitutes of Bisphenol A, a chemical widely recognized as an endocrine disrupting compound. In the past few years, a variety of studies on degradation of BPA demonstrated that microorganisms play important roles in the degradation process. However, the fate of BPS during wastewater treatment processes and the composition of microorganisms that functionalize BPS degradation remain to be explored. In this study, three bioreactors, R-BPS (amended with Bisphenol S), R-BPSHA (amended with Bisphenol S and humic acid) and Con (control bioreactor), were set up to investigate the fate of BPS and the microbial compositions and dynamics in the bioreactors, especially for the microorganisms associated with BPS removal. Results showed that a complete removal was achieved within 24 days. The addition of humic acid accelerated the elimination of BPS in both effluent and sludge. The results of 16S rRNA gene ampilicon sequencing revealed that the most abundant bacteria in all samples were affiliated to Proteobacteria, Bacteroidetes, Acidobacteria and Chloroflexi. Seven major genera were likely associated with BPS removal, including Pseudomonas, Azospira, Hydrogenophaga, Devosia, Delftia, Acidovorax and Rhodobacter. Among them, humic acid increased relative abundance of some bacteria, such as Pseudomonas, Hydrogenophaga and Acidovorax. These findings would give valuable information on the microbial community composition associated with BPS removal, providing biological background for bioremediation of BPS-contaminated environment.

Environmental fate of multiwalled carbon nanotubes and graphene oxide across different aquatic ecosystems

The industrial use and widespread application of carbon-based nanomaterials have caused a rapid increase in their production over the last decades. However, toxicity of these materials is not fully known and is still being investigated for potential human and ecological health risks. Detecting carbon-based nanomaterials in the environment using current analytical methods is problematic, making environmental fate and transport modeling a practical way to estimate environmental concentrations and assess potential ecological risks. The Water Quality Analysis Simulation Program 8 (WASP8) is a dynamic, spatially resolved fate and transport model for simulating exposure concentrations in surface waters and sediments. Recently, WASP has been updated to incorporate processes for simulating the fate and transport of nanomaterials including heteroaggregation and phototransformation. This study examines the fate and transport of multiwalled carbon nanotubes (MWCNT), graphene oxide (GO) and reduced graphene oxide (rGO) in four aquatic ecosystems in the southeastern United States. Sites include a seepage lake, a coastal plains river, a piedmont river and an unstratified, wetland lake. A hypothetical 50-year release is simulated for each site-nanomaterial pair to analyze nanomaterial distribution between the water column and sediments. For all nanomaterials, 99% of the mass loaded moves though systems of high and low residence times without being heteroaggregated and deposited in the sediments. However, significant accumulation in the sediments does occur over longer periods of time. Results show that GO and rGO had the highest mass fraction in the water column of all four sites. MWCNT were found predominantly in the sediments of the piedmont river and seepage lake but were almost entirely contained in the water column of the coastal plains river and wetland lake. Simulated recovery periods following the release estimate 37+ years for lakes and 1-4 years for rivers to reduce sediment nanomaterial concentrations by 50% suggesting that carbon-based nanomaterials have the potential for long-term ecological effects.

Biouptake, toxicity and biotransformation of triclosan in diatom Cyclotella sp. and the influence of humic acid

Triclosan is one of the most frequently detected emerging contaminants in aquatic environment. In this study, we investigated the biouptake, toxicity and biotransformation of triclosan in freshwater algae Cyclotella sp. The influence of humic acid, as a representative of dissolved organic matter, was also explored. Results from this study showed that triclosan was toxic to Cyclotella sp. with 72 h EC₅₀ of 324.9 μg L^-1. Humic acid significantly reduced the toxicity and accumulation of triclosan in Cyclotella sp. SEM analysis showed that Cyclotella sp. were enormously damaged under 1 mg L^-1 triclosan exposure and repaired after the addition of 20 mg L^-1 humic acid. Triclosan can be significantly taken up by Cyclotella sp. The toxicity of triclosan is related to bioaccumulated triclosan as the algal cell numbers decreased when intracellular triclosan increased. A total of 11 metabolites were identified in diatom cells and degradation pathways are proposed. Hydroxylation, methylation, dechlorination, amino acids conjunction and glucuronidation contributed to the transformative reactions of triclosan in Cyclotella sp., producing biologically active products (e.g., methyl triclosan) and conjugation products (e.g., glucuronide or oxaloacetic acid conjugated triclosan), which may be included in the detoxification mechanism of triclosan.

New Insight into the Aggregation of Graphene Oxide Using Molecular Dynamics Simulations and Extended Derjaguin-Landau-Verwey-Overbeek Theory

A comparative experimental and molecular dynamics (MD) simulation study was carried out to investigate the aggregation of graphene oxide (GO). Mechanisms behind the effects of solution chemistries (pH, metal ions, and tannic acid (TA)) and GO topology (carboxyl content, GO size, and GO thickness) were uncovered. For example, MD results showed that more hydrogen bonds formed between GO and water at higher pH, according well with the increased hydrophilicity of GO calculated based on contact angle measurements. Radial distribution functions analysis suggested Ca²⁺ interacted more strongly with GO than Na⁺, which explained the experimental observations that Ca²⁺ was more effective in accelerating the aggregation process than Na⁺. The adsorption-bridging and steric effects of TA were simulated, and TA was found to be unfolded upon wrapping on GOs, leading to an increased capacity for ion and solvent binding. The evaluations of contributions to GO hydrophilicity, electrostatic energy, and intensities of interactions with metal ions indicated the carboxyl group is the essential functional group in mediating the stability of GO. Overall, by combining MD simulations with experimental measurements, we provided molecular-level understandings toward the aggregation of GO, indicating MD, if used properly, can be applied as a useful tool to obtain insights into the aggregation of nanomaterials.