Environmental Impacts by Fragments Released from Nanoenabled Products: A Multiassay, Multimaterial Exploration by the SUN Approach

Unveiling the duality of cement and concrete addressing microplastic pollution: a review

Microplastic pollution has emerged as a global environmental concern, with diverse consequences for ecosystems and human health. While the focus has primarily been on the sources and impacts of microplastics, this review paper explores the roles of cement and concrete in potentially mitigating microplastic pollution and addressing their negative impacts with the focus of 165 relevant publications. Cementitious materials, widely used in construction, have unique properties that greatly increase the formation and transport of microplastics in the environment, and affect circular economy practice. This paper gathers all the information we already know about how cement, concrete, and microplastics interact with each other. It also presents the potential opportunities and challenges of using these materials to deal with microplastic pollution, entailing the advancement of porous concrete as a filtering system, exploration of concrete wetting phenomena based on concrete's surface chemistry and characteristics, proper urban water management systems for concrete green spaces, assessment of innovative technologies with concrete for microplastic mitigation, and the formation of standards and guidelines such as precise Life Cycle Assessment (LCA) tools, environmental product declaration (EPD), policy for urban planning, and green finance paradigms.

Everything falls apart: How solids degrade and release nanomaterials, composite fragments, and microplastics

To ensure the safe use of materials, one must assess the identity and quantity of exposure. Solid materials, such as plastics, metals, coatings and cements, degrade to some extent during their life cycle, and releases can occur during manufacturing, use and end-of-life. Releases (e.g., what is released, how does release happen, and how much material is released) depend on the composition and internal (nano)structures of the material as well as the applied stresses during the lifecycle. We consider, in some depth, releases from mechanical, weathering and thermal stresses and specifically address the use cases of fused-filament 3D printing, dermal contact, food contact and textile washing. Solid materials can release embedded nanomaterials, composite fragments, or micro- and nanoplastics, as well as volatile organics, ions and dissolved organics. The identity of the release is often a heterogenous mixture and requires adapted strategies for sampling and analysis, with suitable quality control measures. Control materials enhance robustness by enabling comparative testing, but reference materials are not always available as yet. The quantity of releases is typically described by time-dependent rates that are modulated by the nature and intensity of the applied stress, the chemical identity of the polymer or other solid matrix, and the chemical identity and compatibility of embedded engineered nanomaterials (ENMs) or other additives. Standardization of methods and the documentation of metadata, including all the above descriptors of the tested material, applied stresses, sampling and analytics, are identified as important needs to advance the field and to generate robust, comparable assessments. In this regard, there are strong methodological synergies between the study of all solid materials, including the study of micro- and nanoplastics. From an outlook perspective, we review the hazard of the released entities, and show how this informs risk assessment. We also address the transfer of methods to related issues such as tyre wear, advanced materials and advanced manufacturing, biodegradable polymers, and non-solid matrices. As the consideration of released entities will become more routine in industry via lifecycle assessment in Safe-and-Sustainable-by-Design practices, release assessments will require careful design of the study with quality controls, the use of agreed-on test materials and standardized methods where these exist and the adoption of clearly defined data reporting practices that enable data reuse, meta-analyses, and comparative studies.

Species sensitivity distributions of micro- and nanoplastics in soil based on particle characteristics

Micro- and nanoplastics are released into the soil through various anthropogenic activities; however, research on ecological risk assessment (ERA) of soil microplastics is limited. In this study, the species sensitivity distributions (SSDs) of representative groups of soil biota were analyzed to determine their sensitivity to microplastic properties. A total of 411 datasets from apical endpoint data within 74 studies were classified and utilized in SSD estimation. The hazardous concentrations for 5% of species for microplastics was 88.18 (40.71-191.00) mg/kg soil. It has been established that small-sized microplastics are more toxic to soil organisms than larger microplastics. Most microplastics were spherical and polystyrene, exhibiting the most adverse effects among all the microplastic types assessed herein. The results suggest that physical characteristics of microplastics are important toxicity determinants in soil ecosystems. Given the potential for adverse environmental effects, further effective management strategies should urgently be employed in these areas. This study provided an integrated perspective of microplastic ecotoxicity in soil. In addition, SSDs were estimated using larger datasets and for more species than in previous studies. This is the first study to consider microplastic properties for estimating SSD.

Weathering Effects on Degradation of Low-Density Polyethylene-Nanosilica Composite with Added Pro-oxidant

Nanomaterials are increasingly used in polymer composites to enhance their properties, such as mechanical performance and durability, increased electrical conductivity, and improved optical clarity. Here results are presented of a study simulating effects of weathering on degradation of a nanosilica-low-density polyethylene (LDPE) composite. Release of nanosilica from LDPE composites is a potential source of toxic SiO2. Nanosilica based LDPE composites were weathered under carefully controlled conditions by exposure to simulated sunlight. The effects of an added pro-oxidant on weathering was examined. Weathering of the composites with pro-oxidant was determined by quantifying changes in infrared spectroscopic properties (Fourier transform infrared spectroscopy / FTIR); mechanical properties, atomic force microscopy (AFM), scanning electron microscopy and other procedures. Wavelength effects on weathering rates were determined in a series of irradiations using simulated solar radiation passed through light filters that blocked different parts of the ultraviolet spectral region. Rates and spectral irradiance were then analyzed to develop spectral weighting functions (SWFs) that quantify wavelength effects on the sunlight-induced weathering of the pro-oxidant amended composites.

Aquatic Mesocosm Strategies for the Environmental Fate and Risk Assessment of Engineered Nanomaterials

In the past decade, mesocosms have emerged as a useful tool for the environmental study of engineered nanomaterials (ENMs) as they can mimic the relevant exposure scenario of contamination. Herein, we analyzed the scientific outcomes of aquatic mesocosm experiments, with regard to their designs, the ENMs tested, and the end points investigated. Several mesocosm designs were consistently applied in the past decade to virtually mimic various contamination scenarios with regard to ecosystem setting as well as ENMs class, dose, and dosing. Statistical analyses were carried out with the literature data to identify the main parameters driving ENM distribution in the mesocosms and the potential risk posed to benthic and planktonic communities as well as global ecosystem responses. These analyses showed that at the end of the exposure, mesocosm size (water volume), experiment duration, and location indoor/outdoor had major roles in defining the ENMs/metal partitioning. Moreover, a higher exposure of the benthic communities is often observed but did not necessarily translate to a higher risk due to the lower hazard posed by transformed ENMs in the sediments (e.g., aggregated, sulfidized). However, planktonic organisms were generally exposed to lower concentrations of potentially more reactive and toxic ENM species. Hence, mesocosms can be complementary tools to existing standard operational procedures for regulatory purposes and environmental fate and risk assessment of ENMs. To date, the research was markedly unbalanced toward the investigation of metal-based ENMs compared to metalloid- and carbon-based ENMs but also nanoenabled products. Future studies are expected to fill this gap, with special regard to high production volume and potentially hazardous ENMs. Finally, to take full advantage of mesocosms, future studies must be carefully planned to incorporate interdisciplinary approaches and ensure that the large data sets produced are fully exploited.

Aquatic Environment Exposure and Toxicity of Engineered Nanomaterials Released from Nano-Enabled Products: Current Status and Data Needs

Rapid commercialisation of nano-enabled products (NEPs) elevates the potential environmental release of engineered nanomaterials (ENMs) along the product life cycle. The current review examined the state of the art literature on aquatic environment exposure and ecotoxicity of product released (PR) engineered nanomaterials (PR-ENMs). Additionally, the data obtained were applied to estimate the risk posed by PR-ENMs to various trophic levels of aquatic biota as a means of identifying priority NEPs cases that may require attention with regards to examining environmental implications. Overall, the PR-ENMs are predominantly associated with the matrix of the respective NEPs, a factor that often hinders proper isolation of nano-driven toxicity effects. Nevertheless, some studies have attributed the toxicity basis of observed adverse effects to a combination of the released ions, ENMs and other components of NEPs. Notwithstanding the limitation of current ecotoxicology data limitations, the risk estimated herein points to an elevated risk towards fish arising from fabrics' PR-nAg, and the considerable potential effects from sunscreens' PR-nZnO and PR-nTiO2 to algae, echinoderms, and crustaceans (PR-nZnO), whereas PR-nTiO2 poses no significant risk to echinoderms. Considering that the current data limitations will not be overcome immediately, we recommend the careful application of similar risk estimation to isolate/prioritise cases of NEPs for detailed characterisation of ENMs' release and effects in aquatic environments.

Form-Specific and Probabilistic Environmental Risk Assessment of 3 Engineered Nanomaterials (Nano-Ag, Nano-TiO2 , and Nano-ZnO) in European Freshwaters

The release of engineered nanomaterials (ENMs) to the environment necessitates an assessment of their environmental risks. The currently available environmental risk assessments (ERA) for ENMs are based on an analysis of the total flows of a specific ENM to the environment and on ecotoxicity studies performed with pristine ENMs. It is known that ENMs undergo transformation during product use and release and in technical systems such as wastewater treatment. The aim of the present study was therefore to perform an ERA of 3 ENMs (nano-Ag, nano-TiO2 , and nano-ZnO) based on a form-specific release model and a form-specific analysis of ecotoxicological data. Predicted environmental concentration values were derived using a form-specific material flow model. Species sensitivity distributions were used to derive predicted-no-effect concentrations (PNECs) for the pristine ENMs and for dissolved and transformed Ag and ZnO. For all ENMs, the matrix-embedded form was included in the assessment. A probabilistic assessment was applied, yielding final probability distributions for the risk characterization ratio (RCR). For nano-Ag, the form-specific assessment resulted in a decrease of the mean RCR from 0.061 for the approach neglecting the different release forms to 0.034 because of the much lower PNEC of transformed Ag. Likewise, for nano-ZnO, the form-specific approach reduced the mean RCR from 1.2 to 0.86. For nano-TiO2 , the form-specific assessment did not change the mean RCR of 0.026. This analysis shows that a form-specific approach can have an influence on the assessment of the environmental risks of ENMs and that, given the availability of form-specific release models, an updated ERA for ENMs can be performed. Environ Toxicol Chem 2021;40:2629-2639. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Quantifying Mechanical Abrasion of MWCNT Nanocomposites Used in 3D Printing: Influence of CNT Content on Abrasion Products and Rate of Microplastic Production

Manufactured nanomaterials (MNMs) are incorporated as "nanofillers" into consumer products to enhance properties of interest. Multiwalled carbon nanotubes (MWCNTs) are known for their unique properties and have many applications in polymers. However, the release of MWCNTs during the nanoenabled product life cycle is concerning. During the use phase, mechanical stresses can produce fragmented materials containing MNMs. The degree of MNM release, the resulting exposure to these materials, and the potential impacts of their release are active research topics. In this study, we describe methodological improvements to study the abrasion of plastics containing MNMs (nanocomposites) and report on characteristics of abrasion products produced and rates of microplastic production. The abrasion device developed for this work allows for the measurement of power inputs to determine scaled release rates. Abrasion rates for plastics used in 3D printing were found to be 0.27 g/m²/s for the PETG polymer and 0.3 g/m²/s for the 2% MWCNT-PETG nanocomposite. Embedded and protuberant MWCNTs appeared to impact the particle size, shape, hydrophobicity, and surface charge of the microplastics, while the inclusion of MWCNTs had a small effect on microplastic production. Measurements of power input to the abrasion process provided a basis for estimating microplastic production rates for these nanocomposites.

Plastic pollution - A case study with Enchytraeus crypticus - From micro-to nanoplastics

The concern about microplastic (a group of polymers) in the environment may cause us to overlook a more substantial problem: microplastics will fragment into nanoplastics. This fragmentation will lead to a high number of nanoplastics particles. Such nanoplastic can be taken up by cells, as opposed to microscale particles that are either not or to much less extend taken up. Fragmentation into nano will also release materials previously safely embedded in the polymer. We here present results from 25 OECD/ISO in vivo hazard tests, and beyond, e.g. extended exposure duration, with Enchytraeus crypticus, using pristine nano-scale materials (NMs) [CuO, Fe₂O₃, Organic Pigment, MWCNT], fragmented products (polymers) with these NMs embedded in the matrices (FP_NM), and fragmented polymers without NMs (FP) [covering the 4 major plastic types: Acrylic, Polyethylene, Polypropylene and Epoxy]. For example, MWCNTs induced a highly significant population decrease after extended period of 60 days, despite having no impact after 28 days' exposure, the standard OECD duration. We conclude, that the standard tests were not suitable to evaluate hazards of these plastic fragments, weathering/ageing of materials is recommended, and extension of test duration can add value to the testing of NMs. We must refocus the concern to testing with polymers (not only "plastics"), from micro-to nano-polymers, and from aquatic to terrestrial environments.

Risk Management Framework for Nano-Biomaterials Used in Medical Devices and Advanced Therapy Medicinal Products

The convergence of nanotechnology and biotechnology has led to substantial advancements in nano-biomaterials (NBMs) used in medical devices (MD) and advanced therapy medicinal products (ATMP). However, there are concerns that applications of NBMs for medical diagnostics, therapeutics and regenerative medicine could also pose health and/or environmental risks since the current understanding of their safety is incomplete. A scientific strategy is therefore needed to assess all risks emerging along the life cycles of these products. To address this need, an overarching risk management framework (RMF) for NBMs used in MD and ATMP is presented in this paper, as a result of a collaborative effort of a team of experts within the EU Project BIORIMA and with relevant inputs from external stakeholders. The framework, in line with current regulatory requirements, is designed according to state-of-the-art approaches to risk assessment and management of both nanomaterials and biomaterials. The collection/generation of data for NBMs safety assessment is based on innovative integrated approaches to testing and assessment (IATA). The framework can support stakeholders (e.g., manufacturers, regulators, consultants) in systematically assessing not only patient safety but also occupational (including healthcare workers) and environmental risks along the life cycle of MD and ATMP. The outputs of the framework enable the user to identify suitable safe(r)-by-design alternatives and/or risk management measures and to compare the risks of NBMs to their (clinical) benefits, based on efficacy, quality and cost criteria, in order to inform robust risk management decision-making.

Key principles and operational practices for improved nanotechnology environmental exposure assessment

Nanotechnology is identified as a key enabling technology due to its potential to contribute to economic growth and societal well-being across industrial sectors. Sustainable nanotechnology requires a scientifically based and proportionate risk governance structure to support innovation, including a robust framework for environmental risk assessment (ERA) that ideally builds on methods established for conventional chemicals to ensure alignment and avoid duplication. Exposure assessment developed as a tiered approach is equally beneficial to nano-specific ERA as for other classes of chemicals. Here we present the developing knowledge, practical considerations and key principles need to support exposure assessment for engineered nanomaterials for regulatory and research applications.

Iced block method: An efficient method for preparation of micro-sized expanded polystyrene foams

Recently, numerous studies concerning dye-labeled microplastic beads have reported on the end-of-life, environmental effects of microplastics because of their ubiquitous commercial usage. Less is understood about the toxicity and bioaccumulation of plastics other than microplastic beads, which can also harm the environment (e.g., fragments, fibers, foams, and films). Expanded polystyrene (EPS) is widespread in the environment owing to its many uses, however, limited research has been conducted on EPS foams. This study focuses on developing an efficient method for the preparation of micro-sized EPS foams for research purposes and compares it with previous microplastics preparation methods reported in 68 previous studies. It was demonstrated that the iced EPS block method (iced EPS block + water) generated larger quantities of smaller-sized EPS foams (20-200 and 200-500 μm) compared to the EPS + ice + water and EPS + water methods. The optimal protocol includes 1) iced EPS block preparation, 2) grinding and sieving, and 3) collecting. Additionally, it was confirmed that the iced EPS block method requires less money, labor, and time compared to previously reported methods in the literature. The method proposed in this research can assist future investigations into the environmental effects of EPS foams.

Continued Efforts on Nanomaterial-Environmental Health and Safety Is Critical to Maintain Sustainable Growth of Nanoindustry

Nanotechnology is enjoying an impressive growth and the global nanotechnology industry is expected to exceed US$ 125 billion by 2024. Based on these successes, there are notions that enough is known and efforts on engineered nanomaterial environmental health and safety (nano-EHS) research should be put on the back burner. However, there are recent events showing that it is not the case. The US Food and Drug Administration found ferumoxytol (carbohydrate-coated superparamagnetic iron oxide nanoparticle) for anemia treatment could induce lethal anaphylactic reactions. The European Union will categorize TiO2 as a category 2 carcinogen due to its inhalation hazard and France banned use of TiO2 (E171) in food from January 1, 2020 because of its carcinogenic potential. Although nanoindustry is seemingly in a healthy state, growth could be hindered for the lack of certainty and more nano-EHS research is needed for the sustainable growth of nanoindustry. Herein, the current knowledge gaps and the way forward are elaborated.

Fragmentation of polymer nanocomposites: modulation by dry and wet weathering, fractionation, and nanomaterial filler

In recent years, an increasing number of polymeric composites incorporating engineered nanomaterials (ENMs) have reached the market. Such nano-enabled products (NEPs) present enhanced performance through improved mechanical, thermal, UV protection, electrical, and gas barrier properties. However, little is known about how environmental weathering impacts ENM release, especially for high-tonnage NEPs like kaolin products, which have not been extensively examined by the scientific community. Here we study the simulated environmental weathering of different polymeric nanocomposites (epoxy, polyamide, polypropylene) filled with organic (multiwalled carbon nanotube, graphene, carbon black) and inorganic (WS2, SiO2, kaolin, Fe2O3, Cu-phthalocyanines) ENMs. Multiple techniques were employed by researchers at three laboratories to extensively evaluate the effect of weathering: ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), optical microscopy, contact angle measurements, gravimetric analysis, analytical ultracentrifugation (AUC), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and Raman spectroscopy. This work aimed to elucidate the extent to which weathering protocol (i.e. wet vs. dry) and diverse filler characteristics modulate fragment release and polymer matrix degradation. In doing so, it expanded the established NanoRelease protocol, previously used for analyzing fragment emission, by evaluating two significant additions: (1) simulated weathering with rain events and (2) fractionation of sample leachate prior to analysis. Comparing different composite materials and protocols demonstrated that the polymer matrix is the most significant factor in NEP aging. Wet weathering is more realistic than dry weathering, but dry weathering seems to provide a more controlled release of material over wet. Wet weathering studies could be complicated by leaching, and the addition of a fractionation step can improve the quality of UV-vis measurements.

The nanoGRAVUR framework to group (nano)materials for their occupational, consumer, environmental risks based on a harmonized set of material properties, applied to 34 case studies

The project nanoGRAVUR (BMBF, 2015-2018) developed a framework for grouping of nanomaterials. Different groups may result for each of the three distinct perspectives of occupational, consumer and environmental safety. The properties, methods and descriptors are harmonised between the three perspectives and are based on: Tier 1 intrinsic physico-chemical properties (what they are) or GHS classification of the non-nano-form (human tox, ecotox, physical hazards); Tier 2 extrinsic physico-chemical properties, release from nano-enabled products, in vitro assays with cells (where they go; what they do); Tier 3 case-specific tests, potentially in vivo studies to substantiate the similarity within groups or application-specific exposure testing. Amongst all properties, dissolution and transformation are least modulated by different nanoforms within one substance, whereas dustiness, dispersion stability, abiotic and especially in vitro surface reactivity vary more often between different nanoforms. The methods developed or selected by nanoGRAVUR fill several gaps highlighted in the ProSafe reviews, and are useful to implement (i) the concept of nanoforms of the European Chemicals Agency (ECHA) and (ii) the concept of discrete forms of the United States Environmental Protection Agency (EPA). One cannot assess the significance of a dissimilarity, if the dynamic range of that property is unknown. Benchmark materials span dynamic ranges that enable us to establish bands, often with order-of-magnitude ranges. In 34 case studies we observed high biological similarity within each substance when we compared different (nano)forms of SiO2, BaSO4, kaolin, CeO2, ZnO, organic pigments, especially when we compared forms that are all untreated on the surface. In contrast, different Fe2O3 or TiO2 (nano)forms differ more significantly. The same nanoforms were also integrated in nano-enabled products (NEPs) for automotive coatings, clinker-reduced cements, cosmetic sunscreen, and lightweight polymers.

The Phases of WS2 Nanosheets Influence Uptake, Oxidative Stress, Lipid Peroxidation, Membrane Damage, and Metabolism in Algae

Application of transition metal dichalcogenide (TMDC) nanosheets with different phases have attracted much attention in various fields. However, the effects of TMDC phases on environmental biology remain largely unknown. In this study, chemically exfoliated WS₂ nanosheets (Ce-WS₂, mainly the 1T phase) and annealed exfoliated WS₂ nanosheets (Ae-WS₂, 2H phase) were fabricated to serve as representative TMDC nanomaterials. Ce-WS₂ showed higher levels of cellular uptake, oxidative stress, lipid peroxidation, membrane damage, and inhibition of photosynthesis than Ae-WS₂ in Chlorella vulgaris. These differences were attributed to the higher electron conductivity and higher separation efficiency of electrons and holes in the 1T phase, a typical feature of Ce-WS₂. Correspondingly, 2H-phase Ae-WS₂ exhibited lower photooxidation/reduction activity and a lower ability to generate reactive oxygen species (mainly •OH) under visible-light irradiation. 1T-phase Ce-WS₂ dissolved more readily than Ae-WS₂ and released more W ions into aqueous environments, but the W ions exhibited negligible toxicity. Metabolomic analysis revealed that Ce-WS₂ induced more obvious alterations in metabolites (e.g., amino acids and fatty acids) and metabolic pathways (e.g., starch and sucrose metabolism) than Ae-WS₂. These alterations correlated with cell membrane damage, oxidative stress and photosynthesis inhibition. The present work provides insights into the environmentally friendly design of two-dimensional TMDCs.