Chemotaxis Increases the Retention of Bacteria in Porous Media with Residual NAPL Entrapment

Microfluidic Study on Green Remediation of Nonaqueous Phase Liquid (NAPL) Contamination in Heterogeneous Groundwater Systems Using Dihydrolevoclucosenone (Cyrene)

One of the primary challenges in conventional remediation of nonaqueous phase liquid (NAPL) contamination in groundwater is the heterogeneous nature of the groundwater system. Conventional remediation agents are often carried away by groundwater flow in high-permeability layers, making it difficult to access NAPL contaminants in low-permeability layers and are prone to generate secondary contamination. This study explores the use of dihydrolevoclucosenone (Cyrene), a bioderived green solvent, as an alternative to traditional remediating agents for NAPL remediation. Through microfluidic experiments and accompanying numerical modeling, we demonstrate that Cyrene enhances the dissolution and mobilization of NAPL contaminants, particularly in low-permeability zones, achieving residual NAPL reductions of up to 80% compared with water and Tween 80 solutions. These findings underscore Cyrene's dual environmental benefits as an eco-friendly solvent for both treating solid waste (e.g., stalks) and for NAPL remediation, paving the way for sustainable and green solutions in environmental management.

Coarse-graining bacterial diffusion in disordered media to surface states

Bacterial motility in spatially structured environments impacts a variety of natural and engineering processes. Constructing models to predict, control, and design bacterial motility for these processes remains challenging because bacteria and active swimmers have complex interactions with surfaces and because the precise environment geometry is unknown. Here, we present a method for deriving bacterial diffusion coefficients in disordered media in terms of cell and environmental parameters. The approach abstracts the dynamics in the full geometry to "surface states," which encode how cells interact with surfaces in the environment. Then, a long-time diffusion equation can be derived analytically from the state model. Applying this method to a run-and-tumble particle in a 2D Lorentz gas environment provides analytical predictions that show good agreement with particle simulations. Like past studies, we observe that the diffusivity depends nonmonotonically on the cell's run length. Using the analytical expressions, we derive the optimal run length, revealing an intuitive dependence on environmental length scales. Furthermore, we find that rescaling length and time by the average distance and time between trap events collapses all of the diffusivities onto a single curve, which we derive analytically. Thus, our approach extracts interpretable, macroscopic diffusive behavior from complex microscopic dynamics, and provides tools and intuitions for understanding bacterial diffusion in disordered media.

Dimensionless Parameters Define Criteria for Optimal Flow Velocity in Enhancing Chemotactic Response toward Residual Contaminants in Porous Media

Chemotactic bacteria may overcome challenges posed by nonaqueous-phase liquid (NAPL) contaminants of low solubility in groundwater and limited bioavailability in tight pores by preferentially migrating to NAPL sources. We explored the transport of chemotactic bacteria to NAPL ganglia at varying pore water velocities in a dual-permeability microfluidic device and using computer-simulated solutions of transport equations. In our experiments, bacteria exhibited a chemotactic response toward NAPL ganglia at the junctures of low- and high-permeability regions (i.e., micropockets), and the extent of retention initially increased with velocity and then decreased at the highest velocity. A dimensional analysis revealed that maximum accumulations occurred at moderate values of the Péclet number P e c = v m d p χ o ∼10 in our system. We also found that accumulation dynamics in micropockets can be represented by a logistic equation incorporating convection and chemotaxis time scales τ f = L i v f and τ che = l a 2 χ o , respectively. By analyzing seven literature studies on chemotaxis, we identified an exposure time scale to chemicals τ exp = d p v f that was useful for evaluating the chemotaxis efficiency. Our study provided unique insights into the effect of fluid flow on chemotaxis in porous media by demonstrating that increasing the fluid velocity to some extent can promote chemotaxis. The dimensionless parameters inform the design of efficient bioremediation strategies for contaminated porous media.

Migration of an active particle in mixtures of rigid and flexible rings

The migration of active particles in slowly moving, crowded, and heterogeneous media is fundamental to various biological processes and technological applications. In this study, we numerically investigate the dynamics of a single active particle in a multicomponent medium composed of mixtures of rigid and flexible rings. We observe a nonmonotonic dependence of diffusivity on the relative fraction of rigid to flexible rings, leading to the identification of an optimal composition for enhanced diffusion. This long-time nonmonotonic diffusion, resulting from the different responses of the active particle to rigid and flexible rings, is coupled with transient short-time trapping. The probability distribution of trapping durations is well described by the herein-proposed extended entropic-trap model. We further theoretically establish a universal relationship between particle activity and the optimal rigid-to-flexible ring ratio for diffusion, which aligns closely with our numerical results.

Microbial chemotaxis in degradation of xenobiotics: Current trends and opportunities

Chemotaxis, the directed movement of microbes in response to chemical gradients, plays a crucial role in the biodegradation of xenobiotics, such as pesticides, industrial chemicals, and pharmaceuticals, which pose significant environmental and health risks. Emerging trends in genomics, proteomics, and synthetic biology have advanced our understanding and control of these processes, thereby enabling the development of engineered microorganisms with tailored chemotactic responses and degradation capabilities. This process plays an essential physiological role in processes, such as surface sensing, biofilm formation, quorum detection, pathogenicity, colonization, symbiotic interactions with the host system, and plant growth promotion. Field applications have demonstrated the potential of bioremediation for cleaning contaminated environments. Therefore, it helps to increase the bioavailability of pollutants and enables bacteria to access distantly located pollutants. Despite considerable breakthroughs in decoding the regulatory mechanisms of bacterial chemotaxis, there are still gaps in knowledge that need to be resolved to harness its potential for sensing and degrading pollutants in the environment. This review covers the role of bacterial chemotaxis in the degradation of xenobiotics present in the environment, focusing on chemotaxis-based bacterial and microfluidic biosensors for environmental monitoring. Finally, we highlight the current challenges and future perspectives for developing more effective and sustainable strategies to mitigate the environmental impact of xenobiotics.

Insights into the Relationship between Temperature Variation and NAPL Removal during In Situ Thermal Remediation of Soil in the Presence of NAPL-Water Co-boiling: A Two-Dimensional Visualized Sandbox Study

Thermal remediation effectively treats sites contaminated with nonaqueous phase liquids (NAPL) by heating soil. A key process is the co-boiling at the water-NAPL interface, which lowers the boiling point due to combined vapor pressures, potentially reducing energy needs. However, determining the optimal end time for heating is challenging due to the invisible nature of underground NAPL, often resulting in excessive energy use. The initial NAPL pool size and distance from the heat source influence the spatiotemporal evolution of the NAPL-water interface, defining three zones: the co-boiling equilibrium zone, a nonequilibrium zone, and an unaffected zone. The temperature data collected by fixed temperature sensors can reflect the spatiotemporal evolution of these zones, offering valuable insights into NAPL removal. This study tackles these challenges using a two-dimensional visualized sandbox integrated with real-time image processing and an array of temperature sensors to monitor the NAPL removal and temperature variation. The results reveal semiquantitatively the impact of different initial NAPL amounts and spatial distributions on temperature variations. An optimized strategy is proposed for temperature sensor positioning, and a qualitative relationship is established between the temperature increase and NAPL removal. These findings can enhance our understanding of subsurface temperature dynamics, supporting more efficient, decarbonized remediation practices.

The Effects of Low Concentrations and Long-Term Contamination by Sodium Dodecyl Sulfate on the Structure and Function of Bacterial Communities in the Lake-Terrestrial Ecotone

Due to the growing focus on daily hygiene practices, sodium dodecyl sulfate (SDS), a widely used surfactant, is increasingly found in domestic sewage and rainfall runoff. Upon entering the lake-terrestrial ecotone, SDS affects the composition, abundance, and functional capacity of soil bacterial communities due to its bacteriostatic properties. To investigate the effects of long-term discharge of sewage containing low concentrations of SDS on microorganisms in the lake-terrestrial ecotone, alterations in bacterial community structure, functional genes, and biomass were examined using a simulated continuous pollutant input. The results indicated the following: (1) The degradation rate of sodium dodecyl sulfate (SDS) by soil microorganisms in the lake-terrestrial ecotone under long-term and low concentrations of SDS stress ranged from 11 to 16 mg/kg·d. (2) The effects of low concentrations and long-term SDS stress on bacterial community structure and gene function in the lake-terrestrial ecotone differed significantly from those of short-term pollution. The damage to microbial-promoted material cycling in the lake-terrestrial ecotone was more severe; however, the proliferation of pathogenic bacteria remained continuously suppressed. (3) Soil bacteria in the lake-terrestrial ecotone responded to the stress of long-term and low concentrations of SDS primarily by enhancing chemotaxis and tolerance.

Effects of mono- and multicomponent nonaqueous-phase liquid on the migration and retention of pollutant-degrading bacteria in porous media

The successful implementation of in-situ bioremediation of nonaqueous-phase liquid (NAPL) contamination in soil-groundwater systems is greatly influenced by the migration performance of NAPL-degrading bacteria. However, the impact and mechanisms of NAPL on the migration/retention of pollutant-degrading bacteria remain unclear. This study investigated the migration/retention performance of A. lwoffii U1091, a strain capable of degrading diesel while producing surfactants, in porous media without and with the presence of mono- and multicomponent NAPL (n-dodecane and diesel) under environmentally relevant conditions. The results showed that under all examined conditions (5 and 50 mM NaCl solution at flow rates of 4 and 8 m/d), the presence of n-dodecane/diesel in porous media could reduce the migration and enhance retention of A. lwoffii in quartz sand columns. Moreover, comparing with mutlicomponent NAPLs of n-dodecane, the monocomponent NAPLs (diesel) exhibited a greater reduction effect on the retention of A. lwoffii in porous media. Through systemically investigating the potential mechanisms via tracer experiment, visible chamber experiment, and theoretical calculation, we found that the reduction in porosity, repulsive forces and movement speeds, the presence of stagnant flow zones in porous media, particularly the biosurfactants generated by A. lwoffii contributed to the enhanced retention of bacteria in NAPL-contaminated porous media. Moreover, owing to presence of the greater amount of hydrophilic components in diesel than in n-dodecane, the available binding sites for the adsorption of bacteria were lower in diesel, resulting in the slightly decreased retention of A. lwoffii in porous media containing diesel than n-dodecane. This study demonstrated that comparing with porous media without NAPL contamination, the retention of strain capable of degrading NAPL in porous media with NAPL contamination was enhanced, beneficial for the subsequent biodegradation of NAPL.

Starvation Process Would Induce Different Bacterial Mobilities and Attachment Performances in Porous Media without and with Nutrients on Surfaces

The influence and mechanisms of starvation on the bacterial mobile performance in porous media with different nutrition conditions are not well understood. The present study systematically investigated the impacts of starvation on the mobility and attachment of both Gram-negative and Gram-positive strains in porous media without and with nutrients on surfaces in both simulated and real water samples. We found that regardless of strain types and water chemistries, starvation would greatly inhibit bacterial attachment onto bare porous media without nutrients yet could significantly enhance cell attachment onto porous media with nutrients on their surfaces. The mechanisms driving the opposite transport behaviors induced by starvation in porous media without and with nutrients were totally different. We found that the starvation process decreased cell motility and increased repulsive force between bacteria and porous media via decreasing cell sizes and zeta potentials, reducing EPS secretion and cell hydrophobicity, thus increasing transport/inhibiting attachment of bacteria in porous media without nutrients on sand surfaces. In contrast, through strengthening the positive chemotactic response of bacteria to nutrients, the starvation process greatly enhanced bacterial attachment onto porous media with nutrients on sand surfaces. Clearly, via modification of the nutrient conditions in porous media, the mobility/attachment performance of bacteria could be regulated.

Soft matter physics of the ground beneath our feet

The soft part of the Earth's surface - the ground beneath our feet - constitutes the basis for life and natural resources, yet a general physical understanding of the ground is still lacking. In this critical time of climate change, cross-pollination of scientific approaches is urgently needed to better understand the behavior of our planet's surface. The major topics in current research in this area cross different disciplines, spanning geosciences, and various aspects of engineering, material sciences, physics, chemistry, and biology. Among these, soft matter physics has emerged as a fundamental nexus connecting and underpinning many research questions. This perspective article is a multi-voice effort to bring together different views and approaches, questions and insights, from researchers that work in this emerging area, the soft matter physics of the ground beneath our feet. In particular, we identify four major challenges concerned with the dynamics in and of the ground: (I) modeling from the grain scale, (II) near-criticality, (III) bridging scales, and (IV) life. For each challenge, we present a selection of topics by individual authors, providing specific context, recent advances, and open questions. Through this, we seek to provide an overview of the opportunities for the broad Soft Matter community to contribute to the fundamental understanding of the physics of the ground, strive towards a common language, and encourage new collaborations across the broad spectrum of scientists interested in the matter of the Earth's surface.

Propulsion of a three-sphere microrobot in a porous medium

Microorganisms and synthetic microswimmers often encounter complex environments consisting of networks of obstacles embedded into viscous fluids. Such settings include biological media, such as mucus with filamentous networks, as well as environmental scenarios, including wet soil and aquifers. A fundamental question in studying their locomotion is how the impermeability of these porous media impacts their propulsion performance compared with the case of that in a purely viscous fluid. Previous studies showed that the additional resistance due to the embedded obstacles leads to an enhanced propulsion of different types of swimmers, including undulatory swimmers, helical swimmers, and squirmers. In this paper, we employ a canonical three-sphere swimmer model to probe the impact of propulsion in porous media. The Brinkman equation is utilized to model a sparse network of stationary obstacles embedded into an incompressible Newtonian liquid. We present both a far-field theory and numerical simulations to characterize the propulsion performance of the swimmer in such porous media. In contrast to enhanced propulsion observed in other swimmer models, our results reveal that both the propulsion speed and efficiency of the three-sphere swimmer are largely reduced by the impermeability of the porous medium. We attribute the substantial reduction in propulsion performance to the screened hydrodynamic interactions among the spheres due to the more rapid spatial decays of flows in Brinkman media. These results highlight how enhanced or hindered propulsion in porous media is largely dependent on individual propulsion mechanisms. The specific example and physical insights provided here may guide the design of synthetic microswimmers for effective locomotion in porous media in their potential biological and environmental applications.

Interplay between environmental yielding and dynamic forcing modulates bacterial growth

Many bacterial habitats-ranging from gels and tissues in the body to cell-secreted exopolysaccharides in biofilms-are rheologically complex, undergo dynamic external forcing, and have unevenly distributed nutrients. How do these features jointly influence how the resident cells grow and proliferate? Here, we address this question by studying the growth of Escherichia coli dispersed in granular hydrogel matrices with defined and highly tunable structural and rheological properties, under different amounts of external forcing imposed by mechanical shaking, and in both aerobic and anaerobic conditions. Our experiments establish a general principle: that the balance between the yield stress of the environment that the cells inhabit, σy, and the external stress imposed on the environment, σ, modulates bacterial growth by altering transport of essential nutrients to the cells. In particular, when σy<σ, the environment is easily fluidized and mixed over large scales, providing nutrients to the cells and sustaining complete cellular growth. By contrast, when σy>σ, the elasticity of the environment suppresses large-scale fluid mixing, limiting nutrient availability and arresting cellular growth. Our work thus reveals a new mechanism, beyond effects that change cellular behavior via local forcing, by which the rheology of the environment may modulate microbial physiology in diverse natural and industrial settings.

Understanding of Co-boiling between Organic Contaminants and Water during Thermal Remediation: Effects of Nonequilibrium Heat and Mass Transport

In situ thermal desorption (ISTD) provides an efficient solution to remediation of soil and groundwater contaminated with nonaqueous phase liquids (NAPLs). Establishing a relationship between the subsurface temperature rise and NAPL removal is significant to reduce energy consumption of ISTD. However, the co-boiling phenomenon between NAPL and water poses a great challenge in developing this relationship due to the nonequilibrium heat and mass transport effects. We performed a systematic experimental investigation into the local temperature rise patterns at different distances from a NAPL pool and under different degrees of superheat by selecting four representative NAPLs (i.e., trichloroethylene, tetrachlorethylene, n-hexane, and n-octane) according to their density and boiling point relative to water. The patterns of temperature rise indicated that the underground temperature field can be divided into three zones: the zone of local thermal equilibrium, the nonequilibrium zone affected by co-boiling, and the zone unaffected by co-boiling. We developed a pattern-recognition-based approach, which considers the effects of local heat and mass transport to establish a qualitative correlation between the temperature rise and NAPL removal. Our results give deeper insights into the understanding of subsurface temperatures in ISTD practice, which can serve as the guideline for more accurate and sustainable remediation.

Surface tension coupled non-uniformly imposed flows modulate the activity of reproducing chemotactic bacteria in porous media

This paper investigates a non-homogeneous two-dimensional model for reproducing chemotactic bacteria, immersed in a porous medium that experiences non-uniformly imposed flows. It is shown that independently of the form of the fluid velocity field, the compressible/incompressible nature of the fluid significantly shifts the Turing stability-instability transition line. In dry media, Gaussian perturbations travel faster than the hyperbolic secant ones, yet the latter exhibit better stability properties. The system becomes highly unstable under strong flows and high surface tension. Approximated solutions recovered by injecting Gaussian perturbations overgrow, in addition to triggering concentric breathing features that split the medium into high and low-density domains. Secant perturbations on the other hand scatter slowly and form patterns of non-uniformly distributed peaks for strong flows and high surface tension. These results emphasize that Gaussian perturbations strongly modulate the activity of bacteria, hence can be exploited to perform fast spreading in environments with changing properties. In this sense, Gaussian profiles are better candidates to explain quick bacterial responses to external factors. Secant-type approximated solutions slowly modulate the bacterial activity, hence are better alternatives to dive into weak bacterial progressions in heterogeneous media.

Chemotaxis along local chemical gradients enhanced bacteria dispersion and PAH bioavailability in a heterogenous porous medium

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous, EPA-designated priority pollutants for soil and groundwater, remaining recalcitrant to bioremediation because of limited bioavailability. In this work, we used naphthalene as a model PAH and soil bacteria Pseudomonas putida G7 to investigate the potential role of chemotaxis to enhance access to PAHs in heterogenous porous media. To this aim, we conducted transport experiments and numerical simulations with chemotactic bacteria and naphthalene trapped within a non-aqueous phase liquid (NAPL) mainly in low permeable areas of a dual-permeability microfluidic device. Microscopic imaging showed higher accumulations of chemotactic bacteria, about eight times that of nonchemotactic bacteria, at the junctures between high and low permeability regions. Pore-scale simulations for fluid flow and naphthalene revealed that the junctures are stagnant areas of fluid flow, which generated strong and temporally persistent naphthalene gradients. The landscape and densities of bacterial accumulation at the junctures were strongly regulated by flow profiles and naphthalene gradients especially those transverse to flow. We conducted macroscale simulations using convective dispersion equations with an added chemotactic velocity to account for directed migration toward naphthalene. Simulated results showed good consistency with experiments and pore-scale simulation as normalized bacterial accumulation per mm of NAPL was 7.80, 7.84 and 7.71 mm^-1 for experiments, pore-scale and macroscale simulations, respectively. Macroscale simulations indicated that in the absence of grain-boundary restrictions associated with the pore structure bacterial dispersion needed to be increased by 50 % to account for the interplay between chemotactic response and naphthalene gradients at the pore-scale level. Our work details the mechanism of pore-scale chemotaxis in enhancing bioavailability of PAHs and its impact on biomass retention at the system level, which provides a potential solution toward more efficient bioremediation for contaminants such as PAHs with limited bioavailability.

Role of tactic response on the mobilization of motile bacteria through micrometer-sized pores

A major cause of high bioremediation endpoints is the limited bioaccessibility to residual contaminants resting in soil pores with diameters close to the size exclusion limit of bacterial cells. Under nongrowing conditions and in the absence of hydraulic flow, we examined how the tactic behavior of motile, contaminant-degrading Pseudomonas putida G7 cells (2 × 1 μm) influenced passage through membranes with pores ranging in size from 1 μm to 12 μm. The bacteria were spontaneously retained by the membranes - even those with the largest pore size. However, the cells were mobilized through 5 μm and 12 μm pores after the application of an attractant (salicylate). Mobilization also occurred by attraction to the common root exudate constituents γ-aminobutyric acid and citrate and repellence (or negative taxis) to zero-valent iron nanoparticles. The observed pore size threshold for tactic mobilization (5 μm) and unaltered cell fluxes and effective cell diffusion against different chemoeffector strengths and concentrations suggest that there is a physical constraint on the gradient sensing mechanism at the pores that drives the tactic response. Our results indicate that chemically mediated, small-scale tactic reactions of motile bacteria may become relevant to enhance the bioaccessibility of the residual contaminants present in micrometer-sized soil pores.

Migration of active rings in porous media

Inspired by how the shape deformations in active organisms help them to migrate through disordered porous environments, we simulate active ring polymers in two-dimensional random porous media. Flexible and inextensible active ring polymers navigate smoothly through the disordered media. In contrast, semiflexible rings undergo transient trapping inside the pore space; the degree of trapping is inversely correlated with the increase in activity. We discover that flexible rings swell while inextensible and semiflexible rings monotonically shrink upon increasing the activity. Together, our findings identify the optimal migration of active ring polymers through porous media.

A biophysical threshold for biofilm formation

Bacteria are ubiquitous in our daily lives, either as motile planktonic cells or as immobilized surface-attached biofilms. These different phenotypic states play key roles in agriculture, environment, industry, and medicine; hence, it is critically important to be able to predict the conditions under which bacteria transition from one state to the other. Unfortunately, these transitions depend on a dizzyingly complex array of factors that are determined by the intrinsic properties of the individual cells as well as those of their surrounding environments, and are thus challenging to describe. To address this issue, here, we develop a generally-applicable biophysical model of the interplay between motility-mediated dispersal and biofilm formation under positive quorum sensing control. Using this model, we establish a universal rule predicting how the onset and extent of biofilm formation depend collectively on cell concentration and motility, nutrient diffusion and consumption, chemotactic sensing, and autoinducer production. Our work thus provides a key step toward quantitatively predicting and controlling biofilm formation in diverse and complex settings.

Numerical Simulation of the Enrichment of Chemotactic Bacteria in Oil-Water Two-Phase Transfer Fields of Heterogeneous Porous Media

Oil pollution in soil-groundwater systems is difficult to remove, and a large amount of residual oil is trapped in the low permeable layer of the heterogeneous aquifer. Aromatic hydrocarbons in oil have high toxicity and low solubility in water, which are harmful to the ecological environment. Chemotactic degrading bacteria can perceive the concentration gradient of non-aqueous phase liquid (NAPL) pollutants in the groundwater environment, and enrich and proliferate around the pollutants, thus achieving a more efficient and thorough remediation effect. However, the existing theoretical models are relatively simple. The physical fields of oil–water two-phase flow and oil-phase solute convection and diffusion in water are not coupled, which further restricts the accuracy of studies on bacterial chemotaxis to NAPL. In this study, geometric models based on the actual microfluidic experimental study were constructed. Based on the phase field model, diffusion convection equation and chemotaxis velocity equation, the effects of heterogeneity of porous media, wall wettability and groundwater flow rate on the residual oil and the concentration distribution of chemotaxis bacteria were studied. Under all of the simulation conditions, the residual oil in the high permeable area was significantly lower than that in the low permeable area, and the wall hydrophilicity enhanced the water flooding effect. Chemotactic bacteria could react to the concentration gradient of pollutants dissolved into water in the oil phase, and enrich near the oil–water interface with high concentration of NAPL, and the density of chemotactic bacteria at the oil–water interface can be up to 1.8–2 times higher than that in the water phase at flow rates from 1.13 to 6.78 m/d.

Influence of confinement on the spreading of bacterial populations

The spreading of bacterial populations is central to processes in agriculture, the environment, and medicine. However, existing models of spreading typically focus on cells in unconfined settings—despite the fact that many bacteria inhabit complex and crowded environments, such as soils, sediments, and biological tissues/gels, in which solid obstacles confine the cells and thereby strongly regulate population spreading. Here, we develop an extended version of the classic Keller-Segel model of bacterial spreading via motility that also incorporates cellular growth and division, and explicitly considers the influence of confinement in promoting both cell-solid and cell-cell collisions. Numerical simulations of this extended model demonstrate how confinement fundamentally alters the dynamics and morphology of spreading bacterial populations, in good agreement with recent experimental results. In particular, with increasing confinement, we find that cell-cell collisions increasingly hinder the initial formation and the long-time propagation speed of chemotactic pulses. Moreover, also with increasing confinement, we find that cellular growth and division plays an increasingly dominant role in driving population spreading—eventually leading to a transition from chemotactic spreading to growth-driven spreading via a slower, jammed front. This work thus provides a theoretical foundation for further investigations of the influence of confinement on bacterial spreading. More broadly, these results help to provide a framework to predict and control the dynamics of bacterial populations in complex and crowded environments.

The spreading of bacteria through their environments critically impacts our everyday lives; it can be harmful, underlying the progression of infections and spoilage of foods, or can be beneficial, enabling the delivery of therapeutics, sustaining plant growth, and remediating polluted terrain. In all these cases, bacteria typically inhabit crowded environments, such as soils, sediments, and biological tissues/gels, in which solid obstacles confine the cells and regulate their spreading. However, existing models of spreading typically focus on cells in unconfined settings, and thus are frequently not applicable to cells in more complex environments. Here, we address this gap in knowledge by extending the classic Keller-Segel model of bacterial spreading via motility to also incorporate cellular growth and division, and explicitly consider the influence of confinement. Through numerical simulations of this extended model, we show how confinement fundamentally alters the dynamics and morphology of spreading bacterial populations—in particular, driving a transition from chemotactic spreading of motile cells to growth-driven spreading via a slower, jammed front. These results provide a foundation for further investigations of the influence of confinement on bacterial spreading, both by yielding testable predictions for future experiments, and by providing guidelines to predict and control the dynamics of bacterial populations in complex and crowded environments.

Biosurfactants and chemotaxis interplay in microbial consortium-based hydrocarbons degradation

Hydrocarbons are routinely detected at low concentrations, despite the degrading metabolic potential of ubiquitous microorganisms. The potential drivers of hydrocarbons persistence are lower bioavailability and mass transfer limitation. Recently, bioremediation strategies have developed rapidly, but still, the solution is not resilient. Biosurfactants, known to increase bioavailability and augment biodegradation, are tightly linked to bacterial surface motility and chemotaxis, while chemotaxis help bacteria to locate aromatic compounds and increase the mass transfer. Harassing the biosurfactant production and chemotaxis properties of degrading microorganisms could be a possible approach for the complete degradation of hydrocarbons. This review provides an overview of interplay between biosurfactants and chemotaxis in bioremediation. Besides, we discuss the chemical surfactants and biosurfactant-mediated biodegradation by microbial consortium.

Microfluidics as an Emerging Platform for Exploring Soil Environmental Processes: A Critical Review

Investigating environmental processes, especially those occurring in soils, calls for innovative and multidisciplinary technologies that can provide insights at the microscale. The heterogeneity, opacity, and dynamics make the soil a "black box" where interactions and processes are elusive. Recently, microfluidics has emerged as a powerful research platform and experimental tool which can create artificial soil micromodels, enabling exploring soil processes on a chip. Micro/nanofabricated microfluidic devices can mimic some of the key features of soil with highly controlled physical and chemical microenvironments at the scale of pores, aggregates, and microbes. The combination of various techniques makes microfluidics an integrated approach for observation, reaction, analysis, and characterization. In this review, we systematically summarize the emerging applications of microfluidic soil platforms, from investigating soil interfacial processes and soil microbial processes to soil analysis and high-throughput screening. We highlight how innovative microfluidic devices are used to provide new insights into soil processes, mechanisms, and effects at the microscale, which contribute to an integrated interrogation of the soil systems across different scales. Critical discussions of the practical limitations of microfluidic soil platforms and perspectives of future research directions are summarized. We envisage that microfluidics will represent the technological advances toward microscopic, controllable, and in situ soil research.

Microbial communities in petroleum-contaminated sites: Structure and metabolisms

Over recent decades, hydrocarbon concentrations have been augmented in soil and water, mainly derived from accidents or operations that input crude oil and petroleum into the environment. Different techniques for remediation have been proposed and used to mitigate oil contamination. Among the available environmental recovery approaches, bioremediation stands out since these hydrocarbon compounds can be used as growth substrates for microorganisms. In turn, microorganisms can play an important role with significant contributions to the stabilization of impacted areas. In this review, we present the current knowledge about responses from natural microbial communities (using DNA barcoding, multiomics, and functional gene markers) and bioremediation experiments (microcosm and mesocosm) conducted in the presence of petroleum and chemical dispersants in different samples, including soil, sediment, and water. Additionally, we present metabolic mechanisms for aerobic/anaerobic hydrocarbon degradation and alternative pathways, as well as a summary of studies showing functional genes and other mechanisms involved in petroleum biodegradation processes.

Fluidic bacterial diodes rectify magnetotactic cell motility in porous environments

Directed motility enables swimming microbes to navigate their environment for resources via chemo-, photo-, and magneto-taxis. However, directed motility competes with fluid flow in porous microbial habitats, affecting biofilm formation and disease transmission. Despite this broad importance, a microscopic understanding of how directed motility impacts the transport of microswimmers in flows through constricted pores remains unknown. Through microfluidic experiments, we show that individual magnetotactic bacteria directed upstream through pores display three distinct regimes, whereby cells swim upstream, become trapped within a pore, or are advected downstream. These transport regimes are reminiscent of the electrical conductivity of a diode and are accurately predicted by a comprehensive Langevin model. The diode-like behavior persists at the pore scale in geometries of higher dimension, where disorder impacts conductivity at the sample scale by extending the trapping regime over a broader range of flow speeds. This work has implications for our understanding of the survival strategies of magnetotactic bacteria in sediments and for developing their use in drug delivery applications in vascular networks.

Chemotactic migration of bacteria in porous media

Chemotactic migration of bacteria-their ability to direct multicellular motion along chemical gradients-is central to processes in agriculture, the environment, and medicine. However, current understanding of migration is based on studies performed in bulk liquid, despite the fact that many bacteria inhabit tight porous media such as soils, sediments, and biological gels. Here, we directly visualize the chemotactic migration of Escherichia coli populations in well-defined 3D porous media in the absence of any other imposed external forcing (e.g., flow). We find that pore-scale confinement is a strong regulator of migration. Strikingly, cells use a different primary mechanism to direct their motion in confinement than in bulk liquid. Furthermore, confinement markedly alters the dynamics and morphology of the migrating population-features that can be described by a continuum model, but only when standard motility parameters are substantially altered from their bulk liquid values to reflect the influence of pore-scale confinement. Our work thus provides a framework to predict and control the migration of bacteria, and active matter in general, in complex environments.

Energy Taxis toward Redox-Active Surfaces Decreases the Transport of Electroactive Bacteria in Saturated Porous Media

The fate and transport of bacteria in porous media are essential for bioremediation and water quality control. However, the influence of biological activities like extracellular electron transfer (EET) and swimming motility toward granular media on cell transport remains unknown. Here, electroactive bacteria with higher Fe(III) reduction abilities were found to demonstrate greater retention in ferrihydrite-coated sand. Increasing the concentrations of the electron donor (1-10 mM lactate), shuttle (0-50 μM anthraquinone-2,6-disulfonate), and acceptor (ferrihydrite, MnO₂, or biochar) under flow conditions significantly reduced Shewanella oneidensis MR-1's mobility through redox-active porous media. The deficiency of EET ability or flagellar motion and inhibition of intracellular proton motive force, all of which are essential for energy taxis, enhanced MR-1's transport. It was proposed that EET could facilitate MR-1 to sense, tactically move toward, and attach on redox-active media surface, eventually improving its retention. Positive linear correlations were established among parameters describing MR-1's energy taxis ability (relative taxis index), cell transport behavior (dispersion coefficient and relative change of effluent percentage), and redox activity of media surface (reduction potential or electron-accepting rate), providing novel insights into the critical impacts of bacterial microscale motility on macroscale cell transport through porous media.

Confinement and activity regulate bacterial motion in porous media

Understanding how bacteria move in porous media is critical to applications in healthcare, agriculture, environmental remediation, and chemical sensing. Recent work has demonstrated that E. coli, which moves by run-and-tumble dynamics in a homogeneous medium, exhibits a new form of motility when confined in a disordered porous medium: hopping-and-trapping motility, in which cells perform rapid, directed hops punctuated by intervals of slow, undirected trapping. Here, we use direct visualization to shed light on how these processes depend on pore-scale confinement and cellular activity. We find that hopping is determined by pore-scale confinement, and is independent of cellular activity; by contrast, trapping is determined by the competition between pore-scale confinement and cellular activity, as predicted by an entropic trapping model. These results thus help to elucidate the factors that regulate bacterial motion in porous media, and could help aid the development of new models of motility in heterogeneous environments.

Surface-Adsorbed Contaminants Mediate the Importance of Chemotaxis and Haptotaxis for Bacterial Transport Through Soils

Chemotaxis and haptotaxis are important biological mechanisms that influence microbial movement toward concentrated chemoattractants in mobile liquids and along immobile surfaces, respectively. This study investigated their coupled effect, as induced by naphthalene (10 mg L⁻¹), on the transport and retention of two pollutant-degrading bacteria, Pseudomonas fluorescens 5RL (Pf5RL) and Pseudomonas stutzeri DQ1 (PsDQ1), in quartz sand and natural soil. The results demonstrated that PsDQ1 was not chemotactic, whereas Pf5RL was chemotactic at 25°C but not at 4°C due to the restricted movement. In a quartz sand column, haptotaxis did not play a role in increasing the transport of Pf5RL as compared with chemotaxis. Compared with a naphthalene-free soil column, Pf5RL broke through naphthalene-presaturated soil columns to reach a stable effluent concentration 0.5 pore volumes earlier due to advective chemotaxis occurring behind the plume front in the bulk solution. Pf5RL also demonstrated greater retention (e.g., a doubled rate of attachment and a one-third smaller breakthrough percentage) due to along-surface haptotaxis and near-surface chemotaxis occurring in less mobile water near the soil surface. However, both chemotaxis and haptotaxis were weakened when Pf5RL co-transported with naphthalene due to reduced adsorption of naphthalene on the soil. This study suggests that surface adsorption of naphthalene can mediate the relative importance of advective chemotaxis (facilitating initial breakthrough), near-surface chemotaxis (increasing bacterial collision), and haptotaxis (increasing bacterial residence time).

Probing the 3D molecular and mineralogical heterogeneity in oil reservoir rocks at the pore scale

Innovative solutions have been designed to meet the global demand for energy and environmental sustainability, such as enhanced hydrocarbon recovery and geo-sequestration of CO₂. These processes involve the movement of immiscible fluids through permeable rocks, which is affected by the interfacial properties of rocks at the pore scale. Overcoming major challenges in these processes relies on a deeper understanding about the fundamental factors that control the rock wettability. In particular, the efficiency of oil recovery strategies depends largely on the 3D wetting pattern of reservoir rocks, which is in turn affected by the adsorption and deposition of 'contaminant' molecules on the pores' surface. Here, we combined high-resolution neutron tomography (NT) and synchrotron X-ray tomography (XRT) to probe the previously unobserved 3D distribution of molecular and mineralogical heterogeneity of oil reservoir rocks at the pore scale. Retrieving the distribution of neutron attenuation coefficients by Monte Carlo simulations, 3D molecular chemical mappings with micrometer dimensions could be provided. This approach allows us to identify co-localization of mineral phases with chemically distinct hydrogen-containing molecules, providing a solid foundation for the understanding of the interfacial phenomena involved in multiphase fluid flow in permeable media.

Bacterial hopping and trapping in porous media

Diverse processes-e.g. bioremediation, biofertilization, and microbial drug delivery-rely on bacterial migration in disordered, three-dimensional (3D) porous media. However, how pore-scale confinement alters bacterial motility is unknown due to the opacity of typical 3D media. As a result, models of migration are limited and often employ ad hoc assumptions. Here we reveal that the paradigm of run-and-tumble motility is dramatically altered in a porous medium. By directly visualizing individual Escherichia coli, we find that the cells are intermittently and transiently trapped as they navigate the pore space, exhibiting diffusive behavior at long time scales. The trapping durations and the lengths of "hops" between traps are broadly distributed, reminiscent of transport in diverse other disordered systems; nevertheless, we show that these quantities can together predict the long-time bacterial translational diffusivity. Our work thus provides a revised picture of bacterial motility in complex media and yields principles for predicting cellular migration.