Biogenic Cyanide Production Promotes Dissolution of Gold Nanoparticles in Soil

Recovering palladium and gold by peroxydisulfate-based advanced oxidation process

Palladium (Pd) and gold (Au) are the most often used precious metals (PMs) in industrial catalysis and electronics. Green recycling of Pd and Au is crucial and difficult. Here, we report a peroxydisulfate (PDS)-based advanced oxidation process (AOPs) for selectively recovering Pd and Au from spent catalysts. The PDS/NaCl photochemical system achieves complete dissolution of Pd and Au. By introducing Fe(II), the PDS/FeCl2·4H2O solution functioned as Fenton-like system, enhancing the leaching efficiency without xenon (Xe) lamp irradiation. Electron paramagnetic resonance (EPR), 18O isotope tracing experiments, and density functional theory calculations revealed that the reactive oxidation species of SO4·-, ·OH, and Fe(IV)═O were responsible for the oxidative dissolution process. Lixiviant leaching and one-step electrodeposition recovered high-purity Pd and Au. Strong acids, poisonous cyanide, and volatile organic solvents were not used during the whole recovery, which enables an efficient and sustainable precious metal recovery approach and encourage AOP technology for secondary resource recycling.

Nanomaterials Regulate Bacterial Quorum Sensing: Applications, Mechanisms, and Optimization Strategies

Anti-virulence therapy that interferes with bacterial communication, known as "quorum sensing (QS)", is a promising strategy for circumventing bacterial resistance. Using nanomaterials to regulate bacterial QS in anti-virulence therapy has attracted much attention, which is mainly attributed to unique physicochemical properties and excellent designability of nanomaterials. However, bacterial QS is a dynamic and multistep process, and there are significant differences in the specific regulatory mechanisms and related influencing factors of nanomaterials in different steps of the QS process. An in-depth understanding of the specific regulatory mechanisms and related influencing factors of nanomaterials in each step can significantly optimize QS regulatory activity and enhance the development of novel nanomaterials with better comprehensive performance. Therefore, this review focuses on the mechanisms by which nanomaterials regulate bacterial QS in the signal supply (including signal synthesis, secretion, and accumulation) and signal transduction cascade (including signal perception and response) processes. Moreover, based on the two key influencing factors (i.e., the nanomaterial itself and the environment), optimization strategies to enhance the QS regulatory activity are comprehensively summarized. Collectively, applying nanomaterials to regulate bacterial QS is a promising strategy for anti-virulence therapy. This review provides reference and inspiration for further research on the anti-virulence application of nanomaterials.

Recent challenges in biological cyanidation and oxidation of sulfide-based refractory gold ore

In mining industries, biomining (comprising biooxidation and bioleaching) is implemented to extract metals from specific ores and waste streams with less environmental effect and expense. Usually, micron-sized gold particles are held in a crystal lattice of iron sulfide minerals and expensively extracted using common approaches. Researchers and industries are interested in developing recent technology and biologically sustainable methods in both pretreatment and further extraction steps for extracting this valuable metal from ores. Diverse studies in biooxidation, as a conventional pretreatment, and biocyanidation, as a new proposed biotechnological method in the downstream gold extraction step, have addressed scientific and technological issues in the extraction of this metal. These two methods have become economically practical by merging high-throughput microbiological data, extraction and recovery process knowledge, and theory validation. However, there is still a gap in the implementation of both the pretreatment method and extraction method due to the consistency and their compatibility with operational recovery conditions. This review brings out the recent biooxidation and biocyanidation improvements, innovation, industry and academic research, and obstacles to gold extraction with a brief explanation to address the recent developments.

High-efficiency gold recovery by additive-induced supramolecular polymerization of β-cyclodextrin

Developing an eco-friendly, efficient, and highly selective gold-recovery technology is urgently needed in order to maintain sustainable environments and improve the utilization of resources. Here we report an additive-induced gold recovery paradigm based on precisely controlling the reciprocal transformation and instantaneous assembly of the second-sphere coordinated adducts formed between β-cyclodextrin and tetrabromoaurate anions. The additives initiate a rapid assembly process by co-occupying the binding cavity of β-cyclodextrin along with the tetrabromoaurate anions, leading to the formation of supramolecular polymers that precipitate from aqueous solutions as cocrystals. The efficiency of gold recovery reaches 99.8% when dibutyl carbitol is deployed as the additive. This cocrystallization is highly selective for square-planar tetrabromoaurate anions. In a laboratory-scale gold-recovery protocol, over 94% of gold in electronic waste was recovered at gold concentrations as low as 9.3 ppm. This simple protocol constitutes a promising paradigm for the sustainable recovery of gold, featuring reduced energy consumption, low cost inputs, and the avoidance of environmental pollution.

Aging of colloidal contaminants and pathogens in the soil environment: Implications for nanoplastic and COVID-19 risk mitigation

Colloidal contaminants and pathogens are widely distributed in soil, whose tiny sizes and distinct surface properties render unique environmental behaviours. Because of aging, colloids can undergo dramatic changes in their physicochemical properties once in the soil environment, thus leading to diverse or even unpredictable environmental behaviour and fate. Herein, we provide a state-of-art review of colloid aging mechanisms and characteristics and implications for risk mitigation. First, we review aging-induced formation of colloidal contaminants and aging-associated changes. We place a special focus on emerging nanoplastic (NP) contaminants and associated physical, chemical, and biological aging processes in soil environments. Second, we assess aging and survival features of colloidal pathogens, especially viruses. Viruses in soils may survive from several days to months, or even several years in groundwater, depending on their rates of inactivation and the reversibility of attachment. Furthermore, we identify implications for risk mitigation based on aging mechanisms. Hotspots of (photo)chemical aging of NPs, including plastic gauzes at construction sites and randomly discarded plastic waste in rural areas, are identified as area requiring greater research attention. For COVID-19, we suggest taking greater care in regions where viruses are persist for long periods, such as cold climate regions. Soil amendment with quicklime (CaO) may act as an effective means for pathogen disinfection. Future risk mitigation of colloidal contaminants and pathogens relies on a better understanding of aging mechanisms and more sophisticated models accurately depicting processes in real soil environments.

CO2-assisted 'Weathering' of Steel Slag-Derived Calcium Silicate Hydrate: A Generalized Strategy for Recycling Noble Metals and Constructing SiO2-Based Nanocomposites

The spent adsorbent loaded by toxic metals is a solid hazardous waste which could cause significant secondary pollution due to potential possible additional release of metal ions. Therefore, the main subject is direct reutilization of spent adsorbents which can further economically and realistically offer new features, like recycling metal adsorbed, or formation of functional SiO₂-based nanocomposites. The nanoporous structure and negative surface charges enable steel slag-derived amorphous calcium silicate hydrate (CSH) to retain effectively the incoming metal ions (e. g. Au³⁺, Ag⁺, Pd²⁺, Fe³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Ce³⁺, Y³⁺, and Gd³⁺) by chemisorption. Sparked by natural carbonation 'weathering', which ultimately sequestrates atmospheric CO₂ by alkaline silicate minerals to leach calcium from mineral matrix, the decalcification reactions of metal-bearing CSH results in successful recovery of noble metals (Ag, Au, Pd) upon NaOH etching the resultant SiO₂ support. Further, SiO₂-based heterostructures, containing nanocrystalline metals (e. g. Au⁰, Ag⁰, Pd⁰, Fe⁰, Co⁰, Ni⁰, Cu⁰, and Zn⁰) or rare-earth oxides (e. g. CeO₂, Y₂O₃, and Gd₂O₃), are formed after reduction in H₂/Ar (5 vol% H₂) flow, which is also very important for the multipurpose immobilization of diverse hybrid materials on SiO₂ surface (e. g. Cu⁰-Ag⁰@SiO₂, Cu⁰-CeO₂@SiO₂, and Cu⁰-Ag⁰-CeO₂@SiO₂).

Uptake, translocation, weathering and speciation of gold nanoparticles in potato, radish, carrot and lettuce crops

Extensive use of nanomaterials in agriculture will inevitably lead to their release to the environment in significant loads. Thus, understanding the fate of nanoparticles in the soil-plant environment, and potential presence and consequent implication of nanoparticles in food and feed products, is required. We study plant uptake of gold nanoparticles from soil, and their distribution, translocation and speciation (in terms of particle size change and release of ionic Au) in the different plant tissues of four important crops (potato, radish, carrot and lettuce). Our new analytical protocol and experiments show the feasibility of determining the presence, concentration and distribution of nanoparticles in different plant parts, which differ from plant to plant. Critically, we identify the evident capacity of plants to break down (or substantially change the properties of) nanoparticles in the rhizosphere prior to uptake, as well as the evident capacity of plants to reorganize ionic metals as nanoparticles in their tissues. This could lead to nanoparticle exposure through consumption of crops.

CuO Nanoparticles Alter the Rhizospheric Bacterial Community and Local Nitrogen Cycling for Wheat Grown in a Calcareous Soil

The application of nanoparticles (NPs) to soils, as either fertilizers or fungicides (e.g., CuO NPs), has been proposed to improve the sustainability of agriculture. The observed effects could result directly from the NP-plant interactions or indirectly through effects on the soil microbiome. The objective of this study was to assess the effects of CuO NPs on the changes in the bacterial community structure and nitrogen-cycling-associated functions in a high pH soil and to correlate these changes with nitrate accumulation, soil parameter changes, and plant growth over 28 days. Triticum aestivum seedlings were exposed to 50 mg/kg CuO NPs, 50 mg/kg CuSO₄, or 0.5 mg/kg CuSO₄ in a standard soil (Lufa 2.1 soil, pH adjusted to 7.6). While Cu treatments reduced nitrate accumulation in the bulk soil, the effects were opposite in the rhizosphere (the soil influenced by root exudates). While nitrate accumulation in bulk soil negatively correlated with total Cu concentration, part of the nitrate concentration in the rhizosphere was explained by root uptake during plant growth, the rest being modulated by Cu treatments. The abundance of genes involved in the nitrogen cycle in the rhizosphere soil correlated with the ionic copper concentration. The increased nitrate concentration in the rhizosphere correlated with an increase of the gene abundance related to the nitrogen fixation and a decrease of denitrification gene abundance. Microbial diversity in bulk or rhizosphere soil under the different treatments alone could not explain these variations, while differences in the assemblages of bacteria associated with these functional gene abundances gave good insights. This study highlights the complexity of microbial N-related function in the rhizosphere and the need to characterize the rhizosphere soil, plant growth and root activity, NP (bio)transformations, along with microbial networks, to understand the impact of agrochemicals (here CuO NPs) on soil fertility.

Microbe-mediated sustainable bio-recovery of gold from low-grade precious solid waste: A microbiological overview

In an era of electronics, recovering the precious metal such as gold from ever increasing piles of electronic-wastes and metal-ion infested soil has become one of the prime concerns for researchers worldwide. Biological mining is an attractive, economical and non-hazardous to recover gold from the low-grade auriferous ore containing waste or soil. This review represents the recent major biological gold retrieval methods used to bio-mine gold. The biomining methods discussed in this review include, bioleaching, bio-oxidation, bio-precipitation, bio-flotation, bio-flocculation, bio-sorption, bio-reduction, bio-electrometallurgical technologies and bioaccumulation. The mechanism of gold biorecovery by microbes is explained in detail to explore its intracellular mechanistic, which help it withstand high concentrations of gold without causing any fatal consequences. Major challenges and future opportunities associated with each method and how they will dictate the fate of gold bio-metallurgy from metal wastes or metal infested soil bioremediation in the coming future are also discussed. With the help of concurrent advancements in high-throughput technologies, the gold bio-exploratory methods will speed up our ways to ensure maximum gold retrieval out of such low-grade ores containing sources, while keeping the gold mining clean and more sustainable.

Nonselective uptake of silver and gold nanoparticles by wheat

Metallic nanoparticles (NPs) show unique reactivity to crop plants, but the uptake mechanisms remain unclear. We quantitatively evaluated the phytoavailability of particles to wheat (Triticum aestivum L.) in hydroponics upon exposure to AgNPs (15 nm) or AuNPs (13 and 33 nm). Particles were physically separated from the released Ag ions by a dialysis membrane, under which particle-specific uptake of AgNPs could be discerned. Plants did not differentiate AgNPs and AuNPs during particle uptake, with uptake rate constants of 1.1 ± 0.1, 1.2 ± 0.3, and 1.2 ± 0.1 L kg^-1 h^-1 for AgNPs, AuNPs (13 nm), and AuNPs (33 nm), respectively. We found little effect of particle size (13 or 33 nm AuNPs) or core composition (Ag or Au) on particle bioavailability. Plants stimulated the subsequent uptake of Evans blue stain and showed cell damage in root tips. These results imply similar physiological processes involved in particle-specific uptake of AgNPs and AuNPs. The internalization of particles was further confirmed by single particle inductively coupled plasma mass spectrometry (spICP-MS) and transmission electron microscope-energy dispersive spectrometer (TEM-EDS) analysis. The work here builds the knowledge base for the nature of particle-specific uptake of different NP types by crop plants.

Opportunities and challenges for nanotechnology in the agri-tech revolution

Current agricultural practices, developed during the green revolution, are becoming unsustainable, especially in the face of climate change and growing populations. Nanotechnology will be an important driver for the impending agri-tech revolution that promises a more sustainable, efficient and resilient agricultural system, while promoting food security. Here, we present the most promising new opportunities and approaches for the application of nanotechnology to improve the use efficiency of necessary inputs (light, water, soil) for crop agriculture, and for better managing biotic and abiotic stress. Potential development and implementation barriers are discussed, emphasizing the need for a systems approach to designing proposed nanotechnologies.

Nanoparticle Size and Coating Chemistry Control Foliar Uptake Pathways, Translocation, and Leaf-to-Rhizosphere Transport in Wheat

Nanoenabled foliar-applied agrochemicals can potentially be safer and more efficient than conventional products. However, limited understanding about how nanoparticle properties influence their interactions with plant leaves, uptake, translocation through the mesophyll to the vasculature, and transport to the rest of the plant prevents rational design. This study used a combination of Au quantification and spatial analysis to investigate how size (3, 10, or 50 nm) and coating chemistry (PVP versus citrate) of gold nanoparticles (AuNPs) influence these processes. Following wheat foliar exposure to AuNPs suspensions (∼280 ng per plant), adhesion on the leaf surface was increased for smaller sizes, and PVP-AuNPs compared to citrate-AuNPs. After 2 weeks, there was incomplete uptake of citrate-AuNPs with some AuNPs remaining on the outside of the cuticle layer. However, the fraction of citrate-AuNPs that had entered the leaf was translocated efficiently to the plant vasculature. In contrast, for similar sizes, virtually all of the PVP-AuNPs crossed the cuticle layer after 2 weeks, but its transport through the mesophyll cells was lower. As a consequence of PVP-AuNP accumulation in the leaf mesophyll, wheat photosynthesis was impaired. Regardless of their coating and sizes, the majority of the transported AuNPs accumulated in younger shoots (10-30%) and in roots (10-25%), and 5-15% of the NPs <50 nm were exuded into the rhizosphere soil. A greater fraction of larger sizes AuNPs (presenting lower ζ potentials) was transported to the roots. The key hypotheses about the NPs physical-chemical and plant physiology parameters that may matter to predict leaf-to-rhizosphere transport are also discussed.

Effect of Soil Organic Matter, Soil pH, and Moisture Content on Solubility and Dissolution Rate of CuO NPs in Soil

The objectives of this research were to quantify the impact of organic matter content, soil pH and moisture content on the dissolution rate and solubility of copper oxide nanoparticles (CuO NPs) in soil, and to develop an empirical model to predict the dissolution kinetics of CuO NPs in soil. CuO NPs were dosed into standard LUFA soils with various moisture content, pH and organic carbon content. Chemical extractions were applied to measure the CuO NP dissolution kinetics. Doubling the reactive organic carbon content in LUFA 2.1 soil increased the solubility of CuO NP 2.7-fold but did not change the dissolution rate constant. Increasing the soil pH from 5.9 to 6.8 in LUFA 2.2 soil decreased the dissolution rate constant from 0.56 mol^1/3·kg^1/3·s^-1 to 0.17 mol^1/3·kg^1/3·s^-1 without changing the solubility of CuO NP in soil. For six soils, the solubility of CuO NP correlated well with soil organic matter content ( R² = 0.89) independent of soil pH. In contrast, the dissolution rate constant correlated with pH for pH < 6.3 ( R² = 0.89), independent of soil organic matter content. These relationships predicted the solubility and dissolution rate constants of CuO NP in two test soils (pH 5.0 and pH 7.6). Moisture content showed negligible impact on the dissolution kinetics of CuO NPs. Our study suggests that soil pH and organic matter content affect the dissolution behavior of CuO NP in soil in a predictable manner.