Clarifying Temporal Trend Variability in Human Biomonitoring of Polybrominated Diphenyl Ethers through Mechanistic Modeling

Environmental Fate of the Azole Fungicide Fluconazole and Its Persistent and Mobile Transformation Product 1,2,4-Triazole

Fluconazole is a persistent and mobile pharmaceutical azole fungicide observed in natural waters globally. It does not significantly degrade via traditional wastewater treatment, resulting in likely environmental and human exposure and environmental-origin azole fungicide resistance. Indirect photochemistry is known to degrade many recalcitrant contaminants in natural waters but has not been tested for fluconazole. We systematically measured rates and identified products of the indirect photodegradation of fluconazole in genuine and synthetic surface waters with varying nitrate, bicarbonate, and dissolved organic matter using high resolution mass spectrometry. Degradation half-lives of fluconazole ranged from 2 weeks to a year, indicating indirect photochemistry is slow but competitive with other loss processes. The transformation products 1,2,4-triazole and 1,2,4-triazole-1-acetic acid were produced in 30 to 100% yield during fluconazole degradation. These products are far more resistant to indirect photochemistry than fluconazole, with half-lives for 1,2,4-triazole in the environment of between 1 and 3 years when measurable with our methods. These "very persistent very mobile" contaminants are likely formed by most pharmaceutical and agrochemical azole fungicides, are regularly detected in the US and Denmark in monitoring programs and our exposure modeling demonstrates high potential for human exposure through drinking water with uncertain health implications.

Accumulation, translocation and transformation of artificial sweeteners in plants: A critical review

Artificial sweeteners (ASs) have become an increasingly significant concern as an emerging contaminant. The widespread utilization has given rise to environmental consequences that are progressively harder to disregard. ASs infiltrate both aquatic and terrestrial ecosystems through the discharge of wastewater effluents and the application of manure and biosolids. These compounds can be absorbed and accumulated by plants from soil, water and the atmosphere, posing potential risks to ecological systems and human health. However, limited data available on plant absorption, translocation, and metabolism of ASs hinders a comprehensive understanding of their impact on ecosystem. This study aims to comprehensively summarize the global distribution of ASs, along with elucidating patterns of their uptake and accumulation within plants. Furthermore, it seeks to elucidate the pivotal factors governing ASs absorption and translocation, encompassing hydrophilicity, ionic nature, plant physiology, and environmental conditions. Notably, there remains a significant knowledge gap in understanding the biodegradation of ASs within plants, with their specific degradation pathways and mechanisms largely unexplored, thereby necessitating further investigation. Additionally, this review provides valuable insights into the ecotoxicological effects of ASs on plants. Finally, it identifies research gaps and outlines potential avenues for future research, offering a forward-looking perspective on this critical issue.

Understanding the importance of atmospheric transformation in assessing the hazards of liquid crystal monomers

Liquid crystal monomers (LCMs), a group of synthetic chemicals released from liquid crystal devices such as televisions and smartphones, have recently been recognized as emerging contaminants due to their widespread occurrence in the environment and potential negative impacts on human health. Airborne LCMs can undergo atmospheric oxidation reactions to form various transformation products. Despite the certainty of atmospheric transformation chemistry, the knowledge about the hazard properties of transformation products remains largely unknown. Here, we perform an in silico model-based evaluation of the persistence, bioaccumulation potential, mobility, and toxicity of two representative LCMs, namely, 1-ethyl-4-(4-(4-propylcyclohexyl)phenyl)benzene and 4''-ethyl-2'-fluoro-4-propyl-1,1':4',1''-terphenyl, and their transformation products. We found that, among the investigated transformation products, 38% have overall persistence greater than the minimum of 331 days among the persistent organic pollutants regulated by the Stockholm Convention, 62% meet the bioaccumulation threshold of 1000 L kg-1 used by the United States Environmental Protection Agency, 44% are classified "mobile" according to the criterion used by the German Environmental Agency, and 58% have the potential to induce unacceptable toxic effects in aquatic organisms. Furthermore, we identified several transformation products with increased persistence, bioaccumulation potential, and mobility compared to their parent compounds. These findings not only offer insights for prioritizing LCM transformation products for future risk assessment, but also underscore the significance of considering atmospheric transformation in the evaluation of environmental risks posed by emerging contaminants, including LCMs.

Polybrominated diphenyl ether (PBDE) exposure and adverse maternal and infant health outcomes: Systematic review

Polybrominated diphenyl ethers (PBDEs) are flame retardants found in ambient environment and are measured in humans. There are reports on general PBDE toxicity, including endocrine disrupting properties. Studies on adverse maternal and infant outcomes and underlying toxicity mechanisms needs to be understood. The objective of this study was to conduct a systematic review to examine the state of science on the relationship between PBDE and adverse maternal/infant health outcomes and related maternal biomarker changes. This literature review was conducted using PubMed, Scopus, Embase and Web of Science for published articles from January 2005-February 2022. Article quality was assessed using Newcastle-Ottawa Scale. Of the 1518 articles, only 54 human observational studies were screened in for this review. A second reviewer examined the validity of these articles. Reports on associations between PBDE and maternal health outcomes included gestational hypertension/preeclampsia (N = 2) and gestational diabetes mellitus/glycemic index (N = 6). Meanwhile, reports on PBDE and infant outcomes (N=32) included effects on infant birth weight, birth length and cephalic perimeter, preterm birth, fetal growth restriction and APGAR scores. Although findings on PBDE exposure and adverse infant outcomes showed inconsistencies across studies, in general, negative correlations between maternal PBDEs and infant birth weight, birth length and cephalic perimeter were seen, in few cases, after stratification by sex. Association between maternal PBDE and maternal biomarkers (N=18) suggested negative impact of PBDE exposure on markers relevant to neuro-endocrine system and inflammatory processes. The review findings identified potential associations between maternal PBDE and adverse maternal/infant health outcomes. Furthermore, PBDE-related biomarker changes suggest disturbances in maternal mechanisms relevant to endocrine disrupting properties of PBDEs. The observed study heterogeneity can be attributed to factors namely, sample size, study design and statistical analysis. Overall review findings imply the necessity for further research to validate PBDE exposure-related adverse maternal/infant health effects and to validate underlying toxicity mechanisms.

Has Regulatory Action Reduced Human Exposure to Flame Retardants?

Flame retardant (FR) exposure has been linked to several environmental and human health effects. Because of this, the production and use of several FRs are regulated globally. We reviewed the available records of polybrominated diphenyl ethers (PBDEs) and hexabromocyclododecanes (HBCDDs) in human breast milk from literature to evaluate the efficacy of regulation to reduce the exposure of FRs to humans. Two-hundred and seven studies were used for analyses to determine the spatial and temporal trends of FR exposure. North America consistently had the highest concentrations of PBDEs, while Asia and Oceania dominated HBCDD exposure. BDE-49 and -99 indicated decreasing temporal trends in most regions. BDE-153, with a longer half-life than the aforementioned isomers, typically exhibited a plateau in breast milk levels. No conclusive trend could be established for HBCDD, and insufficient information was available to determine a temporal trend for BDE-209. Breakpoint analyses indicated a significant decrease in BDE-47 and -99 in Europe around the time that regulation has been implemented, suggesting a positive effect of regulation on FR exposure. However, very few studies have been conducted globally (specifically in North America) after 2013, during the time when the most recent regulations have been implemented. This meta-analysis provides insight into global trends in human exposure to PBDEs and HBCDD, but the remaining uncertainty highlights the need for ongoing evaluation and monitoring, even after a compound group is regulated.

Explore the Dosimetric Relationship between the Intake of Chemical Contaminants and Their Occurrence in Blood and Urine

The dosimetric relationship between the human intake dose of a chemical contaminant (an "external dose") and its concentrations in bodily fluids such as blood and urine (related to an "internal dose"), often characterized by a dose-to-concentration ratio, has critical applications in exposure science, toxicology, and risk assessment, especially in the "new approach methods" era. However, there is a lack of a mechanistic, systematic understanding of how such a dosimetric relationship depends on fundamental chemical properties, such as partition coefficients and biotransformation half-lives. Here, we investigate this issue using a well-evaluated toxicokinetic model, which links external and internal doses by quantifying the absorption and elimination of chemicals. Results are visualized in a series of chemical partitioning space plots, whereby a chemical's dose-to-concentration ratio can be approximately predicted based on its partitioning between air, water, and octanol phases. Our results indicate that when taken in equal doses, chemicals with low volatility and moderate to high hydrophobicity exhibit the highest concentrations in the blood, and chemicals undergoing significant biotransformation tend to exhibit lower concentrations in comparison to their counterparts undergoing negligible biotransformation but possessing similar partitioning properties. Chemicals with high hydrophilicity have the highest concentrations in urine. Such revealed property dependence is similar for both adults and children and for individuals with normal body weights and with obesity. Overall, insights gained from this study are important in predicting blood and urinary concentrations from exposure information and in determining the exposure rate that produces the blood or urinary concentrations observed in biomonitoring studies.

Emission and environmental distribution of decabromodiphenyl ethane (DBDPE) in China from 2006 to 2026: Retrospection, forecasting, and implications for assessment and management

Decabromodiphenyl ethane (DBDPE) is the main alternative to decabromodiphenyl ether (deca-BDE) in commercial use. However, there is increasing evidence show that DBDPE is a potential persistent organic pollutant, and it has been found ubiquitously in environmental media across China in recent years. Monitoring studies have not been able to determine the overall levels and temporal trends of DBDPE contamination in China, and have been unable to explain how emission patterns can affect their environmental distribution. Therefore, this study estimated the temporal variance of DBDPE emissions and environmental concentrations in five regions of China from 2006 to 2026 using the PROduction-To-EXposure (PROTEX) mass balance model. The results showed that Guangdong Province was the greatest DBDPE pollution hotspot in China due to emissions from plastics manufacturing and e-waste disposal; there was also severe pollution in Shandong Province, where almost all the DBDPE in China is produced. The DBDPE concentrations in indoor and outdoor environments increased substantially in all regions during 2006-2021. Furthermore, in Guangdong Province and Shandong Province, the ratio of indoor/outdoor air concentrations was greater than or close to 1, indicative of significant outdoor emission sources of DBDPE. In contrast, the ratios for the Beijing-Tianjin-Hebei region, East China, and Southwest China were below 1 due to the indoor use of electronic equipment containing DBDPE. The temporal trends of these ratios indicated that DBDPE contamination has gradually spread from high-concentration environments with strong emission sources to low-concentration environments. The outcomes of this study have important implications for the risk assessment of DBDPE use in China and can be used to establish contamination-mitigation actions.

Assessing disparities in Americans' exposure to PCBs and PBDEs based on NHANES pooled biomonitoring data

The National Health and Nutrition Examination Survey (NHANES) has been continuously biomonitoring Americans' exposure to two families of harmful environmental chemicals: polychlorinated biphenyls (PCBs) and polybrominated diphenyl ethers (PBDEs). However, biomonitoring these chemicals is expensive. To save cost, in 2005, NHANES resorted to pooled biomonitoring; i.e., amalgamating individual specimens to form a pool and measuring chemical levels from pools. Despite being publicly available, these pooled data gain limited applications in health studies. Among the few studies using these data, racial/age disparities were detected, but there is no control for confounding effects. These disadvantages are due to the complexity of pooled measurements and a dearth of statistical tools. Herein, we developed a regression-based method to unzip pooled measurements, which facilitated a comprehensive assessment of disparities in exposure to these chemicals. We found increasing dependence of PCBs on age and income, whereas PBDEs were the highest among adolescents and seniors and were elevated among the low-income population. In addition, Hispanics had the lowest PCBs and PBDEs among all demographic groups after controlling for potential confounders. These findings can guide the development of population-specific interventions to promote environmental justice. Moreover, both chemical levels declined throughout the period, indicating the effectiveness of existing regulatory policies.

Spatially resolved environmental fate models: A review

Spatially resolved environmental models are important tools to introduce and highlight the spatial variability of the real world into modeling. Although various spatial models have been developed so far, yet the development and evaluation of these models remain a challenging task due to several difficulties related to model setup, computational cost, and obtaining high-resolution input data (e.g., monitoring and emission data). For example, atmospheric transport models can be used when high resolution predicted concentrations in atmospheric compartments are required, while spatial multimedia fate models may be preferred for regulatory risk assessment, life cycle impact assessment of chemicals, or when the partitioning of chemical substances in a multimedia environment is considered. The goal of this paper is to review and compare different spatially resolved environmental models, according to their spatial, temporal and chemical domains, with a closer insight into spatial multimedia fate models, to achieve a better understanding of their strengths and limitations. This review also points out several requirements for further improvement of existing models as well as for their integration.

Human Chemical Exposure from Background Emissions in the United States and the Implication for Quantifying Risks from Marginal Emission Increase

The linear dose-response relationship has long been assumed in assessments of health risk from an incremental chemical emission relative to background emissions. In this study, we systematically examine the relevancy of such an assumption with real-world data. We used the reported emission data, as background emissions, from the 2017 U.S. National Emission Inventory for 95 organic chemicals to estimate the central tendencies of exposures of the general U.S. population. Previously published nonlinear dose-response relationships for chemicals were used to estimate health risk from exposure. We also explored and identified four intervals of exposure in which the nonlinear dose-response relationship may be linearly approximated with fixed slopes. Predicted rates of exposure to these 95 chemicals are all within the lowest of the four intervals and associated with low health risk. The health risk may be overestimated if a slope on the dose-response relationship extrapolated from toxicological assays based on high response rates is used for a marginal increase in emission not substantially higher than background emissions. To improve the confidence of human health risk estimates for chemicals, future efforts should focus on deriving a more accurate dose-response relationship at lower response rates and interface it with exposure assessments.

Assessing Human Exposure to SVOCs in Materials, Products, and Articles: A Modular Mechanistic Framework

A critical review of the current state of knowledge of chemical emissions from indoor sources, partitioning among indoor compartments, and the ensuing indoor exposure leads to a proposal for a modular mechanistic framework for predicting human exposure to semivolatile organic compounds (SVOCs). Mechanistically consistent source emission categories include solid, soft, frequent contact, applied, sprayed, and high temperature sources. Environmental compartments are the gas phase, airborne particles, settled dust, indoor surfaces, and clothing. Identified research needs are the development of dynamic emission models for several of the source emission categories and of estimation strategies for critical model parameters. The modular structure of the framework facilitates subsequent inclusion of new knowledge, other chemical classes of indoor pollutants, and additional mechanistic processes relevant to human exposure indoors. The framework may serve as the foundation for developing an open-source community model to better support collaborative research and improve access for application by stakeholders. Combining exposure estimates derived using this framework with toxicity data for different end points and toxicokinetic mechanisms will accelerate chemical risk prioritization, advance effective chemical management decisions, and protect public health.

Inevitable human exposure to emissions of polybrominated diphenyl ethers: A perspective on potential health risks

Polybrominated diphenyl ethers (PBDEs) serve as flame retardants in many household materials such as electrical and electronic devices, furniture, textiles, plastics, and baby products. Though the use of PBDEs like penta-, octa- and deca-BDE greatly reduces the fire damage, indoor pollution by these toxic emissions is ever-growing. In fact, a boom in the global market projections of PBDEs threatens human health security. Therefore, efforts are made to minimize PBDEs pollution in USA and Europe by encouraging voluntary phasing out of the production or imposing compelled regulations through Stockholm Convention, but >500 kilotons of PBDEs still exist globally. Both 'environmental persistence' and 'bioaccumulation tendencies' are the hallmarks of PBDE toxicities; however, both these issues concerning household emissions of PBDEs have been least addressed theoretically or practically. Critical physiological functions, lipophilicity and toxicity, trophic transfer and tissue specificities are of utmost importance in the benefit/risk assessments of PBDEs. Since indoor debromination of deca-BDE often yields many products, a better understanding on their sorption propensity, environmental fate and human toxicities is critical in taking rigorous measures on the ever-growing global deca-BDE market. The data available in the literature on human toxicities of PBDEs have been validated following meta-analysis. In this direction, the intent of the present review was to provide a critical evaluation of the key aspects like compositional patterns/isomer ratios of PBDEs implicated in bioaccumulation, indoor PBDE emissions versus human exposure, secured technologies to deal with the toxic emissions, and human toxicity of PBDEs in relation to the number of bromine atoms. Finally, an emphasis has been made on the knowledge gaps and future research directions related to endurable flame retardants which could fit well into the benefit/risk strategy.

A perspective on the role of fugacity and activity for evaluating the PBT properties of organic chemicals and providing a multi-media synoptic indicator of environmental contamination

The hazard and risk from organic chemicals present in the environment are routinely evaluated using P (persistence), B (bioaccumulation) and T (toxicity) criteria. We present a perspective on how models based on the equilibrium criteria of fugacity and chemical activity can contribute to all three evaluations, thus providing a consistent and seamless assessment process. Persistence and its closely related, but fundamentally different property, chemical residence time can be determined from degradation half-lives (typically obtained from monitoring data) and multi-media mass balance models describing chemical fate and transport in real or evaluative environments. Bioaccumulation is driven by equilibrium partitioning processes that can be estimated from fugacity models treating uptake by respiration and diet in single organisms and in food webs, most commonly for aquatic systems for which confirmatory monitoring data can be obtained. Biomagnification is readily evaluated both experimentally and as a fugacity (or activity) increase from prey to predator. Toxicokinetic evaluations of chemical uptake and disposition in a variety of organisms, including humans, can be obtained using fugacity- and physiologically-based pharmacokinetic models. Toxicodynamic processes of chemical interactions with organisms leading to adverse toxic outcomes are less obviously amenable to fugacity assessment with the notable exception of baseline toxicity (narcosis), the most common mode of action of commercial chemicals. It is shown that a range of fugacities can be defined and correlated for specific species thus enabling direct comparison of fugacities estimated or monitored in the environment with fugacities resulting in baseline toxicity. Finally, it is shown that fugacity and activity can serve as multi-media metrics of chemical contamination in ecosystems, thus enabling identification of specific regions and species at greatest risk in a pictorial format that is readily understandable to scientific and regulatory communities and to the general public.