Per- and Polyfluoroalkyl Substances (PFAS) in Facemasks: Potential Source of Human Exposure to PFAS with Implications for Disposal to Landfills

Advanced technologies in water treatment: Chitosan and its modifications as effective agents in the adsorption of contaminants

Chitosan, derived from the abundant biopolymer chitin, has emerged as a promising option for water treatment due to its intrinsic bioavailability. This review emphasizes the notable characteristics of chitosan, which allow for various modifications, expanding its applications. The polymer's effectiveness in adsorbing contaminants, particularly in advanced water treatment technologies, is highlighted. The review underscores the potential of chitosan-based hybrid materials, including nanocomposites, hydrogels, membranes, films, sponges, nanoparticles, microspheres, and flakes, as innovative alternatives to traditional chemical-based adsorbents. The advantages of using these materials in wastewater treatment, especially in removing heavy metals, dyes, and emerging compounds, are explored. The study delves into the mechanisms involved in wastewater treatment with chitosan, emphasizing the interactions between the polymer and various contaminants. Additionally, the application of chitosan as a contaminant removal agent in a post-pandemic context is addressed, considering the challenges related to waste management and environmental preservation. The analysis highlights the potential contribution of chitosan in mitigating environmental impacts post-pandemic, offering practical solutions for treating contaminated effluents and promoting sustainability. The study addresses current obstacles and prospects for chitosan-based wastewater treatment, emphasizing its promising role in sustainable water management.

A review of sample collection and analytical methods for detecting per- and polyfluoroalkyl substances in indoor and outdoor air

Per- and polyfluoroalkyl substances (PFAS) are a unique class of chemicals synthesized to aid in industrial processes, fire-fighting products, and to benefit consumer products such as clothing, cosmetics, textiles, carpets, and coatings. The widespread use of PFAS and their strong carbon-fluorine bonds has led to their ubiquitous presence throughout the world. Airborne transport of PFAS throughout the atmosphere has also contributed to environmental pollution. Due to the potential environmental and human exposure concerns of some PFAS, research has extensively focused on water, soil, and organismal detection, but the presence of PFAS in the air has become an area of growing concern. Methods to measure polar PFAS in various matrices have been established, while the investigation of polar and nonpolar PFAS in air is still in its early development. This literature review aims to present the last two decades of research characterizing PFAS in outdoor and indoor air, focusing on active and passive air sampling and analytical methods. The PFAS classes targeted and detected in air samples include fluorotelomer alcohols (FTOHs), perfluoroalkane sulfonamides (FASAs), perfluoroalkane sulfonamido ethanols (FASEs), perfluorinated carboxylic acids (PFCAs), and perfluorinated sulfonic acids (PFSAs). Although the manufacturing of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS) has been largely phased out, these two PFAS are still often detected in air samples. Additionally, recent estimates indicate that there are thousands of PFAS that are likely present in the air that are not currently monitored in air methods. Advances in air sampling methods are needed to fully characterize the atmospheric transport of PFAS.

Ecotoxicological impacts of landfill sites: Towards risk assessment, mitigation policies and the role of artificial intelligence

Waste disposal in landfills remains a global concern. Despite technological developments, landfill leachate poses a hazard to ecosystems and human health since it acts as a secondary reservoir for legacy and emerging pollutants. This study provides a systematic and scientometric review of the nature and toxicity of pollutants generated by landfills and means of assessing their potential risks. Regarding human health, unregulated waste disposal and pathogens in leachate are the leading causes of diseases reported in local populations. Both in vitro and in vivo approaches have been employed in the ecotoxicological risk assessment of landfill leachate, with model organisms ranging from bacteria to birds. These studies demonstrate a wide range of toxic effects that reflect the complex composition of leachate and geographical variations in climate, resource availability and management practices. Based on bioassay (and other) evidence, categories of persistent chemicals of most concern include brominated flame retardants, per- and polyfluorinated chemicals, pharmaceuticals and alkyl phenol ethoxylates. However, the emerging and more general literature on microplastic toxicity suggests that these particles might also be problematic in leachate. Various mitigation strategies have been identified, with most focussing on improving landfill design or leachate treatment, developing alternative disposal methods and reducing waste volume through recycling or using more sustainable materials. The success of these efforts will rely on policies and practices and their enforcement, which is seen as a particular challenge in developing nations and at the international (and transboundary) level. Artificial intelligence and machine learning afford a wide range of options for evaluating and reducing the risks associated with leachates and gaseous emissions from landfills, and various approaches tested or having potential are discussed. However, addressing the limitations in data collection, model accuracy, real-time monitoring and our understanding of environmental impacts will be critical for realising this potential.

Evaluation of per- and polyfluoroalkyl substances (PFAS) in landfill liquids from Pennsylvania, Colorado, and Wisconsin

PER: and polyfluoroalkyl substances (PFAS) have been measured in aqueous components within landfills. To date, the majority of these studies have been conducted in Florida. This current study aimed to evaluate PFAS concentrations in aqueous components (leachate, gas condensate, stormwater, and groundwater) from four landfills located outside of Florida, in Pennsylvania, Colorado, and Wisconsin (2 landfills). The Pennsylvania landfill also provided the opportunity to assess a leachate treatment system. Sample analyses were consistent across studies including the measurements of 26 PFAS and physical-chemical parameters. For the four target landfills, average PFAS concentrations were 6,900, 22,000, 280, and 260 ng L-1 in the leachate, gas condensate, stormwater, and groundwater, respectively. These results were not significantly different than those observed for landfills in Florida except for the significantly higher PFAS concentrations in gas condensate compared to leachate. For on-site treatment at the Pennsylvania landfill, results suggest that the membrane biological bioreactor (MBBR) system performed similarly as aeration-based leachate treatment systems at Florida landfills resulting in no significant decreases in ∑26PFAS. Overall, results suggest a general consistency across US regions in PFAS concentrations within different landfill liquid types, with the few differences observed likely influenced by landfill design and local climate. Results confirm that leachate exposed to open air (e.g., in trenches or in treatment systems) have lower proportions of perfluoroalkyl acid precursors relative to leachate collected in enclosed pipe systems. Results also confirm that landfills without bottom liner systems may have relatively higher PFAS levels in adjacent groundwater and that landfills in wetter climates tend to have higher PFAS concentrations in leachate.

Toward the development of a molecular toolkit for the microbial remediation of per-and polyfluoroalkyl substances

Per- and polyfluoroalkyl substances (PFAS) are highly fluorinated synthetic organic compounds that have been used extensively in various industries owing to their unique properties. The PFAS family encompasses diverse classes, with only a fraction being commercially relevant. These substances are found in the environment, including in water sources, soil, and wildlife, leading to human exposure and fueling concerns about potential human health impacts. Although PFAS degradation is challenging, biodegradation offers a promising, eco-friendly solution. Biodegradation has been effective for a variety of organic contaminants but is yet to be successful for PFAS due to a paucity of identified microbial species capable of transforming these compounds. Recent studies have investigated PFAS biotransformation and fluoride release; however, the number of specific microorganisms and enzymes with demonstrable activity with PFAS remains limited. This review discusses enzymes that could be used in PFAS metabolism, including haloacid dehalogenases, reductive dehalogenases, cytochromes P450, alkane and butane monooxygenases, peroxidases, laccases, desulfonases, and the mechanisms of microbial resistance to intracellular fluoride. Finally, we emphasize the potential of enzyme and microbial engineering to advance PFAS degradation strategies and provide insights for future research in this field.

Wearing face masks as a potential source for inhalation and oral uptake of inanimate toxins - A scoping review

BACKGROUND

From 2020 to 2023 many people around the world were forced to wear masks for large proportions of the day based on mandates and laws. We aimed to study the potential of face masks for the content and release of inanimate toxins.

METHODS

A scoping review of 1003 studies was performed (database search in PubMed/MEDLINE, qualitative and quantitative evaluation).

RESULTS

24 studies were included (experimental time 17 min to 15 days) evaluating content and/or release in 631 masks (273 surgical, 228 textile and 130 N95 masks). Most studies (63%) showed alarming results with high micro- and nanoplastics (MPs and NPs) release and exceedances could also be evidenced for volatile organic compounds (VOCs), xylene, acrolein, per-/polyfluoroalkyl substances (PFAS), phthalates (including di(2-ethylhexyl)-phthalate, DEHP) and for Pb, Cd, Co, Cu, Sb and TiO2.

DISCUSSION

Of course, masks filter larger dirt and plastic particles and fibers from the air we breathe and have specific indications, but according to our data they also carry risks. Depending on the application, a risk-benefit analysis is necessary.

CONCLUSION

Undoubtedly, mask mandates during the SARS-CoV-2 pandemic have been generating an additional source of potentially harmful exposition to toxins with health threatening and carcinogenic properties at population level with almost zero distance to the airways.

Epidemic-specific association of maternal exposure to per- and polyfluoroalkyl substances (PFAS) and their components with maternal glucose metabolism: A cross-sectional analysis in a birth cohort from Hong Kong

Per- and polyfluoroalkyl substances (PFAS) are persistent chemicals that have been linked to increased risk of gestational diabetes mellitus (GDM) and may affect glucose metabolisms during pregnancy. We examined the associations between maternal PFAS exposure and maternal glucose metabolisms and GDM risk among 1601 mothers who joined the Hyperglycaemia-and-Adverse-Pregnancy-Outcome (HAPO) Study in Hong Kong in 2001-2006. All mothers underwent a 75 g-oral-glucose-tolerance test at 24-32 weeks of gestation. We measured serum concentrations of six PFAS biomarkers using high-performance liquid-chromatography-coupled-with-tandem-mass-spectrometry (LC-MS-MS). We fitted conventional and advanced models (quantile-g-computation [qgcomp] and Bayesian-kernel machine regression [BKMR]) to assess the associations of individual and a mixture of PFAS with glycaemic traits. Subgroup analyses were performed based on the enrollment period by the severe-acute-respiratory-syndrome (SARS) epidemic periods in Hong Kong between March 2003 and May 2004. PFOS and PFOA were the main components of PFAS mixture among 1601 pregnant women in the Hong Kong HAPO study, with significantly higher median PFOS concentrations (19.09 ng/mL), compared to Chinese pregnant women (9.40 ng/mL) and US women (5.27 ng/mL). Maternal exposure to PFAS mixture was associated with higher HbA1c in the qgcomp (β = 0.04, 95 % CI: 0.01-0.06) model. We did not observe significant associations of PFAS mixture with fasting plasma glucose (PG), 1-h and 2-h PG in either model, except for 2-h PG in the qgcmop model (β = 0.074, 95 % CI: 0.01-0.15). PFOS was the primary contributor to the overall positive effects on HbA1c. Epidemic-specific analyses showed specific associations between PFAS exposure and the odds of GDM in the pre-SARS epidemic period. The median concentration of PFOS was highest during the peri-SARS epidemic (21.2 [14.5-43.6] ng/mL) compared with the pre-SARS (12.3 [9.2-19.9] ng/mL) and post-SARS (20.3 [14.2-46.3] ng/mL) epidemic periods. Potential interactions and exposure-response relationships between PFOA and PFNA with elevated HbA1c were observed in the peri-SARS period in BKMR model. Maternal exposure to PFAS mixture was associated with altered glucose metabolism during pregnancy. SARS epidemic-specific associations call for further studies on its long-term adverse health effects, especially potential modified associations by lifestyle changes during the COVID-19 pandemic.

Evaluation of per- and polyfluoroalkyl substances (PFAS) released from two Florida landfills based on mass balance analyses

Per- and polyfluoroalkyl substances (PFAS) have been found at high levels within landfill environments. To assess PFAS distributions, this study aimed to evaluate PFAS mass flux leached from disposed solid waste and within landfill reservoirs by mass balance analyses for two full-scale operational Florida landfills. PFAS mass flux in different aqueous components within landfills were estimated based on PFAS concentrations and water flow rates. For PFAS concentration, 26 PFAS, including 18 perfluoroalkyl acids (PFAAs) and 8 PFAA-precursors, were measured in samples collected from the landfills or estimated based on previous studies. Flow rates of aqueous components (rainfall, evapotranspiration, runoff, stormwater, groundwater, leakage, gas condensate, and leachate) were evaluated through the Hydrologic Evaluation of Landfill Performance model, water balance, and Darcy's Law. Results showed that the average PFAS mass flux leached from the solid waste standardized by area was estimated as 36.8 g/ha-yr, which was approximately 1 % to 3 % of the total amount of PFAS within the solid waste. The majority of PFAS leached from the solid waste (95 % to 97 %) is captured by the leachate collection system, with other aqueous components representing much smaller fractions (stormwater system at 3 % to 5 %, and gas condensate and groundwater at < 1 %). Also, based on the results, we estimate that PFAS releases will likely occur at least over 40 years. Overall, these results can help prioritize components for waste management and PFAS treatment during the anticipated landfill release periods.

Comparison of the PFAS and physical-chemical parameter fluctuations between an ash landfill and a MSW landfill

Studies of per- and polyfluoroalkyl substances (PFAS) fluctuations at landfills have focused on municipal solid waste (MSW) leachate. Few studies exist that evaluate fluctuations (defined by the coefficient of variation, CV) in MSW incinerator ash (MSWA) landfill leachate and that evaluate PFAS fluctuations in stormwater, groundwater, and treated liquids on-site. In this study, aqueous landfill samples (leachate, treated leachate, stormwater, gas condensate, ambient groundwater, and effluent from a groundwater remediation system) were collected from a MSW and an MSWA landfill geographically located within close proximity (less than 40 km). The objective of this study was to compare the leachate compositions between these two landfill types and to evaluate temporal variations. Results indicated that the CV of total detected PFAS concentrations in leachate was higher for the MSW landfill (CV = 43 %) compared to the MSWA landfill (CV = 16 %). The total detected PFAS concentration in MSW leachate samples (mean: 9641 ng/L) was higher than in MSWA leachate samples (mean: 2621 ng/L) (p < 0.05). Within a landfill, PFAS concentrations were correlated (rs > 0.6, p < 0.05) with alkalinity, total organic carbon (TOC), and ammonia. Results from the on-site leachate treatment system at the MSW landfill indicated reductions in COD, TOC, and ammonia; however, the ∑26PFAS concentration increased 3 % after the treatment. Overall, results demonstrated that differences between landfill types and fluctuations in PFAS within landfills should be considered when designing landfill leachate collection and treatment systems to remove PFAS. The comparative analysis in this study can provide insights into optimizing leachate management for MSW and MSWA landfills.

Terminal settling and rising velocity prediction of macroplastics: Medical face masks as newly emerged objects of concern

The widespread use of medical face masks during the SARS-CoV-2 pandemic has significantly increased plastic waste, with a considerable proportion of these masks ending up in the environment. As these masks are transported through wind and surface runoff, they accumulate in water bodies, leading to pollution and potential environmental risks. Understanding the transport behavior of these macroplastic items is crucial for addressing the pollution problem effectively. This study focuses on predicting the terminal settling and rising velocities of medical face masks, considering their unique shape and composition, aiding upcoming research with base data for, e.g., numerical transport simulations. Three different mask types, including surgical face masks, FFP2-standard face masks, and non-medical reusable face masks, were investigated in various shapes, and modified transport formulas that take into account the shape factor and sphere-equivalent radius of the masks to accurately predict their terminal settling and rising velocities were tested for applicability. The results reveal that the unique shapes of masks influence the terminal settling and rising velocity to a greater extent than their density difference to water. The absolute mean terminal velocities ranged from 0.05 to 0.3 m/s. Understanding the transport behavior of the studied face masks provides valuable insights for managing and mitigating the pollution caused by discarded face masks in water bodies and helps to develop effective strategies for environmental protection. Furthermore, the findings highlight the need for comprehensive laboratory studies to investigate the rising and settling velocities of common macroplastic items, as they are expected to vary in their hydrodynamic behavior significantly.

An insight into the benefits of substituting polypropylene with biodegradable polylactic acid face masks for combating environmental emissions

Mask waste can affect the natural environment and human health. In this study, the life cycle assessment (LCA) of two types of face masks (Polylactic acid (PLA) and Polypropylene (PP)) was first performed to evaluate the environmental impacts from production to end-of-life, and then, greenhouse gas (GHG) emissions were estimated for each life stage. The GHG emissions for one functional unit of PP and PLA face masks were estimated to be 6.27E+07 and 5.06E+07 kg CO2 eq, respectively. Explicitly, PLA mask production emissions are 37 % lower as compared to those for PP masks. Packaging has been recognized as a major GHG source throughout the product's life cycle. This study may provide a new insight into the environmental benefits of reducing GHG emissions within PLA face mask life cycles. Biodegradable and environmentally friendly materials can be used in the manufacturing and packaging of face masks.

Measurement of fluorotelomer alcohols based on solid phase microextraction followed by gas chromatography-mass spectrometry and its application in solid waste study

This work developed a method based on solid phase microextraction followed by gas chromatography/mass spectrometry (SPME-GC/MS) for the measurement of fluorotelomer alcohols (FTOHs) in gas samples. The method quantification limit (MQL) is 6-7 ng/L for 6:2 fluorotelomer alcohols (6:2 FTOH) and 8:2 fluorotelomer alcohols (8:2 FTOH). In contrast to common methods such as thermal desorption combined with GC-MS, it needs neither pre-concentration equipment nor large sample volume. The extraction-evaporation-GC/MS is commonly used in literature for FTOHs measurement in solids samples. We developed a method to measure FTOHs in solid samples by adding solvent extraction prior to headspace SPME-GC/MS. The extraction-headspace SPME-GC/MS method has a quantification limit of 40-43 ng per gram for 6:2 FTOH and 8:2 FTOH in solid samples. This is comparable to the MQLs for the extraction-evaporation-GC/MS method. Removing the solvent evaporation step decreased the risk of contamination and loss of analytes. The developed methods were successfully used in three examples of solid waste study: 1) measuring 6:2 FTOH and 8:2 FTOH above the MQL in gas emissions from a closed landfill, 2) finding 6:2 FTOH above MQL in 9 of 31 solid consumer products, and 3) finding that the release of 6:2 FTOH in simulated landfills containing popcorn bags was linear at a rate of 3.15 ng/g popcorn bags-day and that partial 6:2 FTOH was from the hydrolysis of precursors.

Exploring Route-Specific Pharmacokinetics of PFAS in Mice by Coupling in Vivo Tests and Physiologically Based Toxicokinetic Models

BACKGROUND

Oral ingestion, inhalation, and skin contact are important exposure routes for humans to uptake per- and polyfluoroalkyl substances (PFAS). However, nasal and dermal exposure to PFAS remains unclear, and accurately predicting internal body burden of PFAS in humans via multiple exposure pathways is urgently required.

OBJECTIVES

We aimed to develop multiple physiologically based toxicokinetic (PBTK) models to unveil the route-specific pharmacokinetics and bioavailability of PFAS via respective oral, nasal, and dermal exposure pathways using a mouse model and sought to predict the internal concentrations in various tissues through multiple exposure routes and extrapolate it to humans.

METHODS

Mice were administered the mixed solution of perfluorohexane sulfonate, perfluorooctane sulfonate, and perfluorooctanoic acid through oral, nasal, and dermal exposure separately or jointly. The time-dependent concentrations of PFAS in plasma and tissues were determined to calibrate and validate the individual and combined PBTK models, which were applied in single- and repeated-dose scenarios.

RESULTS

The developed route-specific PBTK models successfully simulated the tissue concentrations of PFAS in mice following single or joint exposure routes as well as long-term repeated dose scenarios. The time to peak concentration of PFAS in plasma via dermal exposure was much longer (34.1-83.0 h) than that via nasal exposure (0.960 h). The bioavailability of PFAS via oral exposure was the highest (73.2%-98.0%), followed by nasal (33.9%-66.8%) and dermal exposure (4.59%-7.80%). This model was extrapolated to predict internal levels in human under real environment.

DISCUSSION

Based on these data, we predict the following: PFAS were absorbed quickly via nasal exposure, whereas a distinct hysteresis effect was observed for dermal exposure. Almost all the PFAS to which mice were exposed via gastrointestinal route were absorbed into plasma, which exhibited the highest bioavailability. Exhalation clearance greatly depressed the bioavailability of PFAS via nasal exposure, whereas the lowest bioavailability in dermal exposure was because of the interception of PFAS within the skin layers. https://doi.org/10.1289/EHP11969.

Effects of short-chain per- and polyfluoroalkyl substances (PFAS) on toxicologically relevant gene expression profiles in a liver-on-a-chip model

Short-chain per- and polyfluoroalkyl substances (PFAS) are highly stable and widely used environmental contaminants that pose potential health risks to humans. Aggregating reliable mechanistic information for safety assessments necessitates physiologically relevant high-throughput screening approaches. Here, we demonstrated the utility of a liver-on-a-chip model to investigate the effects of five short-chain PFAS at low (1 nM) and high (1 μM) concentrations on toxicologically-relevant gene expression profiles using the QuantiGene® Plex Assay. We found that the short-chain PFAS tested in this study modulated the expression of ABCG2, a gene encoding for the breast cancer resistance protein (BCRP), with marked and significant upregulation (up to 4-fold) observed for all but one of the short-chain PFAS tested. PFBS and HFPO-DA repressed SLCO1B3 expression, a gene that encodes for an essential liver-specific organic anion transporter. High concentrations of PFBS, PFHxA, and PFHxS upregulated the expression of genes encCYP1A1,CYP2B6 and CYP2C19 with the same treatments resulting in the repression of the expression of the gene encoding CYP1A2. This dysregulation could have consequences for the clearance of endogenous compounds and xenobiotics. However, we acknowledge that increased expression of genes encoding for transporters and biotransformation enzymes may or may not indicate changes to their protein expression or activity. Overall, our study provides important insights into the effects of short-chain PFAS on liver function and their potential implications for human health. The use of the liver-on-a-chip model in combination with the QuantiGene® Plex Assay may be a valuable tool for future high-throughput screening and gene expression profiling in toxicology studies.

Exploring the release of hazardous volatile organic compounds from face masks and their potential health risk

Hazardous chemicals released from the petroleum-derived face mask can be inhaled by wearers and cause adverse health effects. Here, we first used headspace solid-phase microextraction coupled with GC-MS to comprehensively analyze the volatile organic compounds (VOCs) released from 26 types of face masks. The results showed that total concentrations and peak numbers ranged from 3.28 to 197 μg/mask and 81 to 162, respectively, for different types of mask. Also, light exposure could affect the chemical composition of VOCs, particularly increasing the concentrations of aldehydes, ketones, organic acids and esters. Of these detected VOCs, 142 substances were matched to a reported database of chemicals associated with plastic packaging; 30 substances were identified by the International Agency for Research on Cancer (IARC) as potential carcinogenic to humans; 6 substances were classified in the European Union as persistent, bioaccumulative, and toxic, or very persistent, very bioaccumulative substance. Reactive carbonyls were ubiquitous in masks, especially after exposure to light. The potential risk of VOCs released from the face masks were then accessed by assuming the extreme scenario that all the VOC residues were released into the breathing air within 3 h. The result showed that the average total concentration of VOCs (17 μg/m3) was below the criterion for hygienic air, but seven substances, 2-ethylhexan-1-ol, benzene, isophorone, heptanal, naphthalene, benzyl chloride, and 1,2-dichloropropane exceeded the non-cancer health guidelines for lifetime exposure. This finding suggested that specific regulations should be adopted to improve the chemical safety of face masks.

Thermal Phase Transition and Rapid Degradation of Forever Chemicals (PFAS) in Spent Media Using Induction Heating

In this study, we have developed an innovative thermal degradation strategy for treating per- and polyfluoroalkyl substance (PFAS)-containing solid materials. Our strategy satisfies three criteria: the ability to achieve near-complete degradation of PFASs within a short timescale, nonselectivity, and low energy cost. In our method, a metallic reactor containing a PFAS-laden sample was subjected to electromagnetic induction that prompted a rapid temperature rise of the reactor via the Joule heating effect. We demonstrated that subjecting PFASs (0.001-12 μmol) to induction heating for a brief duration (e.g., <40 s) resulted in substantial degradation (>90%) of these compounds, including recalcitrant short-chain PFASs and perfluoroalkyl sulfonic acids. This finding prompted us to conduct a detailed study of the thermal phase transitions of PFASs using thermogravimetric analysis and differential scanning calorimetry (DSC). We identified at least two endothermic DSC peaks for anionic, cationic, and zwitterionic PFASs, signifying the melting and evaporation of the melted PFASs. Melting and evaporation points of many PFASs were reported for the first time. Our data suggest that the rate-limiting step in PFAS thermal degradation is linked with phase transitions (e.g., evaporation) occurring on different time scales. When PFASs are rapidly heated to temperatures similar to those produced during induction heating, the evaporation of melted PFAS slows down, allowing for the degradation of the melted PFAS.

Degradation of per- and polyfluoroalkyl substances in landfill leachate by a thin-water-film nonthermal plasma reactor

Per- and polyfluoroalkyl substances (PFAS) are present in landfill leachate, posing potential challenges to leachate disposal and treatment. This work represents the first study of a thin-water-film nonthermal plasma reactor for PFAS degradation in landfill leachate. Of the 30 PFAS measured in three raw leachates, 21 were above the detection limits. The removal percentage depended on the category of PFAS. For example, perfluorooctanoic acid PFOA (C8) had the highest removal percentage (77% as an average of the three leachates) of the perfluoroalkyl carboxylic acids (PFCAs) category. The removal percentage decreased when the carbon number increased from 8 to 11 and decreased from 8 to 4. The effects of various landfill leachate components, including sodium chloride, acetate, humic acids, pH, and surfactants, had no or minor impacts (<30%) on PFOA mineralization in synthetic samples. This might be explained by the plasma-generation and PFAS-degradation mainly occurring at the gas/liquid interface. Shorter-chain PFCAs were produced as intermediates of PFOA degradation, and shorter-chain PFCAs and perfluorosulfonic acids (PFSAs) were produced as intermediates of perfluorooctanesulfonic acid (PFOS). The concentrations of the intermediates decreased with decreasing carbon number, suggesting a stepwise removal of difluoromethylene (CF₂) in the degradation pathway. Potential PFAS species in the raw and treated leachates were identified at the molecular level through non-targeted Fourier-transform ion cyclotron resonance mass spectrometry (FT-ICR MS). The intermediates did not show accurate toxicity per Microtox bioassay.

Short-chain per- and polyfluoralkyl substances (PFAS) effects on oxidative stress biomarkers in human liver, kidney, muscle, and microglia cell lines

Long-chain per- and polyfluoralkyl substances (PFAS) are ubiquitous contaminants implicated in the induction of intracellular reactive oxygen species (ROS), compromising antioxidant defense mechanisms in vitro and in vivo. While a handful of studies have assessed oxidative stress effects by PFAS, few specifically address short-chain PFAS. We conducted an evaluation of oxidative stress biomarkers in vitro following exposures to low (1 nM) and high (1 μM) concentrations of five short-chain PFAS compounds: perfluorobutanesulfonic acid (PFBS), perfluorohexanoic acid (PFHxA), [undecafluoro-2-methyl-3-oxahexanoic acid (HFPO-DA)], 6:2 fluorotelomer alcohol (6:2 FTOH) and perfluorohexanesulfonic acid (PFHxS). We conducted experiments in human kidney (HEK293-hTLR2), liver (HepaRG), microglia (HMC-3), and muscle (RMS-13) cell lines. Fluorescence microscopy measurements in HepaRG cells indicated ROS generation in cells exposed to PFBS and PFHxA for 24 h. Antioxidant enzyme activities were determined following 24 h short-chain PFAS exposures in HepaRG, HEK293-hTLR2, HMC-3, and RMS-13. Notably, exposure to PFBS for 24 h increased the activity of GPX in all four cell types at 1 μM and 1 nM in HepaRG and RMS-13 cells. Every short-chain PFAS evaluated, except for PFHxS, increased the activity of at least one antioxidant enzyme. To our knowledge, this is the first study of its kind to explore antioxidant defense alterations to microglia and muscle cell lines by PFAS. The findings of this study hold great potential to contribute to the limited understanding of short-chain PFAS mechanisms of toxicity and provide data necessary to inform the human health risk assessment process.

Per- and polyfluoroalkyl substances (PFAS) distribution in landfill gas collection systems: leachate and gas condensate partitioning

While per- and polyfluoroalkyl substances (PFAS) have been reported extensively in municipal solid waste (MSW) landfill leachate,they have rarely been quantified in landfill gas or in discrete landfill liquids such as landfill gas condensate (LGC), and the potential for PFAS to partition to the condensate has not been reported. LGC and leachate collected from within gas wells known as gas well pump-out (GWP) from three MSW landfills underwent physical-chemical characterization and PFAS analysis to improve understanding of the conditions under which these liquids form and to illuminate PFAS behavior within landfills. LGC was observed to be clear liquid containing ammonia and alkalinity while GWP strongly resembled leachate - dark in color, high in chloride and ammonia. Notably, arsenic and antimony were found in concentrations exceeding regulatory thresholds by over two orders of magnitude in many LGC samples. LGC contained a lower average concentration of ΣPFAS (19,000 ng L) compared to GWP (56,000 ng L); however, LGC contained more diversity of PFAS, with 53 quantified compared to 44 in GWP. LGC contained proportionally more precursor PFAS than GWP, including more semi-volatile PFAS which are rarely measured in water matrices, such as fluorotelomer alcohols and perfluoroalkane sulfonamido ethanols. This study provides the first detailed comparison of these matrices to inform timely leachate management decisions.

Disposable Polypropylene Face Masks: A Potential Source of Micro/Nanoparticles and Organic Contaminates in Humans

We have been effectively protected by disposable propylene face masks during the COVID-19 pandemic; however, they may pose health risks due to the release of fine particles and chemicals. We measured micro/nanoparticles and organic chemicals in disposable medical masks, surgical masks, and (K)N95 respirators. In the breathing-simulation experiment, no notable differences were found in the total number of particles among mask types or between breathing intensities. However, when considering subranges, <2.5 μm particles accounted for ∼90% of the total number of micro/nanoparticles. GC-HRMS-based suspect screening tentatively revealed 79 (semi)volatile organic compounds in masks, with 18 being detected in ≥80% of samples and 44 in ≤20% of samples. Three synthetic phenolic antioxidants were quantified, and AO168 reached a median concentration of 2968 ng/g. By screening particles collected from bulk mask fabrics, we detected 18 chemicals, including four commonly detected in masks, suggesting chemical partition between the particles and the fabric fibers and chemical exposure via particle inhalation. These particles and chemicals are believed to originate from raw materials, intentionally and nonintentionally added substances in mask production, and their transformation products. This study highlights the need to study the long-term health risks associated with mask wearing and raises concerns over mask quality control.

An investigation into the aging of disposable face masks in landfill leachate

Due to the excessive use of disposable face masks during the COVID-19 pandemic, their accumulation has posed a great threat to the environment. In this study, we explored the fate of masks after being disposed in landfill. We simulated the possible process that masks would experience, including the exposure to sunlight before being covered and the contact with landfill leachate. After exposure to UV radiation, all three mask layers exhibited abrasions and fractures on the surface and became unstable with the increased UV radiation duration showed aging process. The alterations in chemical groups of masks as well as the lower mechanical strength of masks after UV weathering were detected to prove the happened aging process. Then it was found that the aging of masks in landfill leachate was further accelerated compared to these processes occurring in deionized water. Furthermore, the carbonyl index and isotacticity of the mask samples after aging for 30 days in leachate were higher than those of pristine materials, especially for those endured longer UV radiation. Similarly, the weight and tensile strength of the aged masks were also found lower than the original samples. Masks were likely to release more microparticles and high concentration of metal elements into leachate than deionized water after UV radiation and aging. After being exposed to UV radiation for 48 h, the concentration of released particles in leachate was 39.45 μL/L after 1 day and then grew to 309.45 μL/L after 30 days of aging. Seven elements (Al, Cr, Cu, Zn, Cd, Sb and Pb) were detected in leachate and the concentration of this metal elements increased with the longer aging time. The findings of this study can advance our understanding of the fate of disposable masks in the landfill and develop the strategy to address this challenge in waste management.

A review of microbial degradation of per- and polyfluoroalkyl substances (PFAS): Biotransformation routes and enzymes

Since the 1950s, copious amounts of per- and polyfluoroalkyl substances (PFAS) (dubbed "forever chemicals") have been dumped into the environment, causing heavy contamination of soil, surface water, and groundwater sources. Humans, animals, and the environment are frequently exposed to PFAS through food, water, consumer products, as well as waste streams from PFAS-manufacturing industries. PFAS are a large group of synthetic organic fluorinated compounds with widely diverse chemical structures that are extremely resistant to microbial degradation. Their persistence, toxicity to life on earth, bioaccumulation tendencies, and adverse health and ecological effects have earned them a "top priority pollutant" designation by regulatory bodies. Despite that a number of physicochemical methods exist for PFAS treatment, they suffer from major drawbacks regarding high costs, use of high energy and incomplete mineralization (destruction of the CF bond). Consequently, microbial degradation and enzymatic treatment of PFAS are highly sought after as they offer a complete, cheaper, sustainable, and environmentally friendly alternative. In this critical review, we provide an overview of the classification, properties, and interaction of PFAS within the environment relevant to microbial degradation. We discuss latest developments in the biodegradation of PFAS by microbes, transformation routes, transformation products and degradative enzymes. Finally, we highlight the existing challenges, limitations, and prospects of bioremediation approaches in treating PFAS and proffer possible solutions and future research directions.

Paints: A Source of Volatile PFAS in Air─Potential Implications for Inhalation Exposure

Paints are widely used in indoor settings yet there are no data for volatile per- and polyfluoroalkyl substances (PFAS) for paints or knowledge if paints are potentially important sources of human exposure to PFAS. Different commercial paints (n = 27) were collected from local hardware stores and analyzed for volatile PFAS by gas chromatography-mass spectrometry (GC-MS), nonvolatile PFAS by liquid chromatography-quadrupole time-of-flight mass spectrometry (LC-qTOF), and total fluorine by ¹⁹F nuclear magnetic resonance spectroscopy (NMR). Diluted paint required clean up to remove 6:2 fluorotelomer phosphate diester (diPAP), which thermally transforms into 6:2 FTOH at 280 °C (GC inlet temperature). Only 6:2 FTOH (0.9-83 μg/g) and 6:2 diPAP (0.073-58 μg/g) were found in five exterior and nine interior paints and only accounted for a maximum of 17% of total fluorine. Upon drying, 40% of the FTOH mass was lost, and the loss was verified by measurements of the cumulative FTOH mass measured in the air of a small, confined space over a 3 h period. Based on the liquid paint results, the ConsExpo model was used for potential exposure assessment and one commercial paint exceeded the chosen reference dose (5 μg/kg-day) for children and adults, indicating the potential for human exposure during painting.

Per- and polyfluoroalkyl substances in the atmosphere of waste management infrastructures: Uncovering secondary fluorotelomer alcohols, particle size distribution, and human inhalation exposure

Per- and polyfluoroalkyl substances (PFAS) have been applied in numerous industrial and consumer products, the majority of which flow into waste management infrastructures (WMIs) at the end of their life cycles, but little is known about atmospheric releases of PFAS from these facilities. In this study, we addressed this key issue by investigating 49 PFAS, including 23 ionic and 26 neutral and precursor PFAS, in the potential sources (n = 4; within or adjacent to WMIs) and reference sites (n = 2; coastal and natural reserve sites) in urban and rural areas of Hong Kong, China. Duplicate samples of air and size-segregated particulate matter were collected for 48 h continuously using a 11-stage Micro-Orifice Uniform Deposit Impactor (MOUDI). In general, fluorotelomer alcohols (FTOHs) and perfluoroalkane sulfonamides were the predominant PFAS classes found across sampling sites. We also demonstrated the release of several less frequently observed semivolatile intermediate products (e.g., secondary FTOHs) during waste treatment. Except for perfluorooctane sulfonate, the size-segregated distributions of particulate PFAS exhibited heterogeneity across sampling sites, particularly in the WMIs, implying combined effects of sorption affinity and emission sources. A preliminary daily air emission estimation revealed that landfill was a relatively important source of PFAS relative to the wastewater treatment plant. A simplified International Commission on Radiological Protection model was used to estimate lung depositional fluxes, and the results showed that inhaled particulate PFAS were mainly deposited in the head airway while fine and ultrafine particles carried PFAS deeper into the lung alveoli. The cumulative daily inhalation dose of gaseous and particulate PFAS ranged from 81.9 to 265 pg/kg/d. In-depth research is required to understand the health effect of airborne PFAS on workers at WMIs.

Neutral Per- and Polyfluoroalkyl Substances, Butyl Carbitol, and Organic Corrosion Inhibitors in Aqueous Film-Forming Foams: Implications for Vapor Intrusion and the Environment

Per- and polyfluoroalkyl substances (PFAS), butyl carbitol, and corrosion inhibitors are components of aqueous film-forming foams (AFFFs). Volatile (neutral) fluorotelomerization (FT)- and electrochemical fluorination (ECF)-based PFAS, butyl carbitol, and organic corrosion inhibitors were quantified in 39 military specification (MilSpec), non-MilSpec, and alcohol resistant-AFFF concentrates (undiluted) from 1974 to 2010. Fluorotelomer alcohols were found only in FT-based AFFFs and N-methyl- and N-ethyl-perfluoroalkyl sulfonamides, and sulfonamido ethanols were found only in ECF-based AFFFs. Neutral PFAS and benzotriazole, 4-methylbenzotriazole, and 5-methybenzotriazole occurred at mg/L levels in the AFFFs, while butyl carbitol occurred at g/L levels. Neutral PFAS concentrations in indoor air due to vapor intrusion of a nearby undiluted AFFF release are estimated to be anywhere from 2 to >10 orders of magnitude higher than documented background indoor air concentrations. Estimated butyl carbitol and organic corrosion inhibitor concentrations were lower than and comparable to indoor concentrations recently measured, respectively. The wide range of neutral PFAS concentrations and Henry's law constants indicate that field, soil-gas measurements are needed to validate the estimations. Co-discharged butyl carbitol likely contributes to oxygen depletion in AFFF-impacted aquifers and may hinder the natural PFAS aerobic biotransformation. Organic corrosion inhibitors in AFFFs indicate that these are another source of corrosion inhibitors in the environment.

An Overview of Chemical Additives on (Micro)Plastic Fibers: Occurrence, Release, and Health Risks

Plastic fibers are ubiquitous in daily life with additives incorporated to improve their performance. Only a few restrictions exist for a paucity of common additives, while most of the additives used in textile industry have not been clearly regulated with threshold limits. The production of synthetic fibers, which can shed fibrous microplastics easily (< 5 mm) through mechanical abrasion and weathering, is increasing annually. These fibrous microplastics have become the main composition of microplastics in the environment. This review focuses on additives on synthetic fibers; we summarized the detection methods of additives, compared concentrations of different additive types (plasticizers, flame retardants, antioxidants, and surfactants) on (micro)plastic fibers, and analyzed their release and exposure pathways to environment and human beings. Our prediction shows that the amounts of predominant additives (phthalates, organophosphate esters, bisphenols, per- and polyfluoroalkyl substances, and nonylphenol ethoxylates) released from clothing microplastic fibers (MFs) are estimated to reach 35, 10, 553, 0.4, and 568 ton/year to water worldwide, respectively; and 119, 35, 1911, 1.4, and 1965 ton/year to air, respectively. Human exposure to MF additives via inhalation is estimated to be up to 4.5–6440 µg/person annually for the above five additives, and via ingestion 0.1–204 µg/person. Notably, the release of additives from face masks is nonnegligible that annual human exposure to phthalates, organophosphate esters, per- and polyfluoroalkyl substances from masks via inhalation is approximately 491–1820 µg/person. This review helps understand the environmental fate and potential risks of released additives from (micro)plastic fibers, with a view to providing a basis for future research and policy designation of textile additives.