Coral-like CoMnOx as a Highly Active Catalyst for Benzene Catalytic Oxidation

Engineering oxygen vacancies in acid-etched MgMn2O4 for efficiently catalytic benzene combustion: Synergistic activation of gaseous oxygen and surface lattice oxygen

The synergistic activation of gaseous oxygen and surface lattice oxygen is essential for designing highly efficient catalysts to eliminate VOCs. Herein, an effective acid treatment was carried out to create more oxygen vacancies by modulating the electronic structure of MgMn2O4 spinels and MgMnOx mixed oxides. The acid-treated MgMn2O4 exhibited outstanding catalytic performance, with the reaction rate of benzene rising by 8.55 times at 200 °C. After acid treatment, MgMn2O4 partially retained its spinel structure, while Mn2O3 in situ grew on the surface due to the selective removal of Mg2+. The transformation of Mn-O-Mg into Mn-O weakened the strength of adjacent Mn-O bonds, thereby promoting the release of surface lattice oxygen and the regeneration of oxygen vacancies. In addition, acid-treated MgMn2O4 facilitated the adsorption and activation of gaseous oxygen. In situ DRIFTS analysis proved that the synergistic activation of gaseous oxygen and surface lattice oxygen accelerated the conversion of intermediates, thus contributing to the efficient degradation of benzene.

Regulating the mobility of lattice oxygen on hollow cobalt-manganese sub-nanospheres for enhanced catalytic oxidation of toluene and o-xylene

Promoting lattice oxygen mobility of Co-based catalysts is crucial to making progress in catalytic oxidation technology. The addition of manganese, a transition metal with similar ionic radius to cobalt and variable valence, was supposed to enhance the mobility of lattice oxygen species of Co-based oxide. A range of hollow CoMnaOx sub-nanosphere catalysts with different Mn/Co ratios was synthesized via a template-sacrificed method, and the effects of different Mn/Co ratios on the structural properties of the catalysts and their catalytic performance for benzene series volatile organic compounds (VOCs) oxidation were investigated. Hollow CoMn2Ox sub-nanosphere exhibited good catalytic activity for oxidation of toluene (T90 = 265 °C) and o-xylene (T90 = 297 °C), as well as excellent recycling ability and water resistance. By adjusting the Mn/Co ratio, metal ions enter into the different tetrahedral or octahedral active sites. Compared with Co3O4, the desorption temperature of surface lattice oxygen on CoMn2Ox decreased by 110 °C. These results demonstrate that the addition of manganese can encourage the electron transfer on CoMnaOx, indicating that the introduction of the appropriate amount of manganese accelerates the activation of gas O2 and mobility of surface lattice oxygen species, thereby expediting the oxidation of benzene series VOCs.

Ultrathin LayCoOx Nanosheets with High Porosity Featuring Boosted Catalytic Oxidation of Benzene: Mechanism Elucidation via an Experiment-Theory Combined Paradigm

Designing transition-metal oxides for catalytically removing the highly toxic benzene holds significance in addressing indoor/outdoor environmental pollution issues. Herein, we successfully synthesized ultrathin LayCoOx nanosheets (thickness of ∼1.8 nm) with high porosity, using a straightforward coprecipitation method. Comprehensive characterization techniques were employed to analyze the synthesized LayCoOx catalysts, revealing their low crystallinity, high surface area, and abundant porosity. Catalytic benzene oxidation tests demonstrated that the La0.029CoOx-300 nanosheet exhibited the most optimal performance. This catalyst enabled complete benzene degradation at a relatively low temperature of 220 °C, even under a high space velocity (SV) of 20,000 h-1, and displayed remarkable durability throughout various catalytic assessments, including SV variations, exposure to water vapor, recycling, and long time-on-stream tests. Characterization analyses confirmed the enhanced interactions between Co and doped La, the presence of abundant adsorbed oxygen, and the extensive exposure of Co3+ species in La0.029CoOx-300 nanosheets. Theoretical calculations further revealed that La doping was beneficial for the formation of oxygen vacancies and the adsorption of more hydroxyl groups. These features strongly promoted the adsorption and activation of oxygen, thereby accelerating the benzene oxidation processes. This work underscores the advantages of doping rare-earth elements into transition-metal oxides as a cost-effective yet efficient strategy for purifying industrial exhausts.

Hydroxyl-Decorated Pt as a Robust Water-Resistant Catalyst for Catalytic Benzene Oxidation

In catalytic oxidation reactions, the presence of environmental water poses challenges to the performance of Pt catalysts. This study aims to overcome this challenge by introducing hydroxyl groups onto the surface of Pt catalysts using the pyrolysis reduction method. Two silica supports were employed to investigate the impact of hydroxyl groups: SiO2-OH with hydroxyl groups and SiO2-C without hydroxyl groups. Structural characterization confirmed the presence of Pt-Ox, Pt-OHx, and Pt0 species in the Pt/SiO2-OH catalysts, while only Pt-Ox and Pt0 species were observed in the Pt/SiO2-C catalysts. Catalytic performance tests demonstrated the remarkable capacity of the 0.5 wt % Pt/SiO2-OH catalyst, achieving complete conversion of benzene at 160 °C under a high space velocity of 60,000 h-1. Notably, the catalytic oxidation capacity of the Pt/SiO2-OH catalyst remained largely unaffected even in the presence of 10 vol % water vapor. Moreover, the catalyst exhibited exceptional recyclability and stability, maintaining its performance over 16 repeated cycles and a continuous operation time of 70 h. Theoretical calculations revealed that the construction of Pt-OHx sites on the catalyst surface was beneficial for modulating the d-band structure, which in turn enhanced the adsorption and activation of reactants. This finding highlights the efficacy of decorating the Pt surface with hydroxyl groups as an effective strategy for improving the water resistance, catalytic activity, and long-term stability of Pt catalysts.

Catalytic removal of toluene using MnO2-based catalysts: A review

Volatile organic compounds (VOCs) have serious hazard to human health and ecological environment. Due to its low cost and high activity, the catalytic oxidation technology considered to be the most effective method to remove VOCs. Toluene is one of the typical VOCs, hence its catalytic elimination is crucial for the regulation of VOCs. Manganese dioxide (MnO₂) has been extensively studied for its excellent redox performance and low-temperature operation conditions. In this review, we summarize the research progresses in the toluene catalytic oxidation of MnO₂-based catalysts, which contain single MnO₂, metal-doped MnO₂ and supported MnO₂ catalyst. In particular, we pay much attention on the relationship between the chemical properties and toluene oxidation performance over MnO₂ catalyst, as well as the catalytic reaction mechanisms. Moreover, the effects of different crystal forms and morphologies on the catalytic toluene reaction were discussed. And the perspective on MnO₂ catalysts for the catalytic oxidation of toluene has been proposed. We expect that the summary of these important findings can serve as an important reference for the catalytic treatment of VOCs.

Normal temperature catalytic degradation of toluene over Pt/TiO2

Normal temperature catalytic ozonation is an effective method for the removal of volatile organic compounds (VOCs). A series of TiO₂-supported noble metal catalysts were synthesized by a facile impregnation method. The as-prepared catalysts were evaluated for the catalytic oxidation of toluene. It was determined that the 1 wt%Pt/TiO₂ exhibited outstanding performance that 65% conversion of toluene was achieved with the space velocity of 30,000 h^-1 even at room temperature (25°C). The structure-activity relationship of various catalysts was investigated via BET, XRD, SEM, TEM as well as XPS. The results indicated that the uniform dispersion of Pt nanoparticles, abundant surface adsorbed oxygen species as well as the strong interaction between Pt and TiO₂ favoured toluene degradation at normal temperature. Based on FT-IR, a simplified reaction scheme was proposed: toluene was first oxidized to benzoate species then alcohol species, ketones, carboxyl acids, which was finally degraded into CO₂ and H₂O. The low activation energy of 1 wt%Pt/TiO₂ determined to be 47 kJ mol^-1 also benefited for toluene degradation at ambient temperature.

Mesoporous catalysts for catalytic oxidation of volatile organic compounds: preparations, mechanisms and applications

Volatile organic compounds (VOCs) are mainly derived from human activities, but they are harmful to the environment and our health. Catalytic oxidation is the most economical and efficient method to convert VOCs into harmless substances of water and carbon dioxide at relatively low temperatures among the existing techniques. Supporting noble metal and/or transition metal oxide catalysts on the porous materials and direct preparation of mesoporous catalysts are two efficient ways to obtain effective catalysts for the catalytic oxidation of VOCs. This review focuses on the preparation methods for noble-metal-based and transition-metal-oxide-based mesoporous catalysts, the reaction mechanisms of the catalytic oxidations of VOCs over them, the catalyst deactivation/regeneration, and the applications of such catalysts for VOCs removal. It is expected to provide guidance for the design, preparation and application of effective mesoporous catalysts with superior activity, high stability and low cost for the VOCs removal at lower temperatures.

Recent advances in non-noble metal-based oxide materials as heterogeneous catalysts for C–H activation

This perspective article summarizes the recent developments of non-noble metal-based oxides, as a new class of catalysts for C−H bond activation, focusing on their essential surface properties.

Recycling electroplating sludge as a monolithic catalyst for effective catalytic purification of volatile organic compounds

Electroplating sludge had a high content of heavy metals and usually lacked high-value-added utilization. In this work, Cu-containing sludge was used to synthesize a spinel catalyst, which was applied in catalytic oxidization of toluene. As a result, the sludge-derived spinel removed 50% of toluene (1000 ppm, 9600 h^-1) at 280 °C. In comparison, a reagent-synthesized spinel with a similar component removed 50% of pollutant at 294 °C. The sludge-derived spinel also showed a stable performance for over 50 h at 370 °C. Even when the initial concentration was increased to 5000 ppm, or the gas hourly space velocity was increased to 40,000 h^-1, the temperature for 50% removal was only increased to 303 °C. According to characterizations, surface oxygens of the sludge-derived spinel were more active than those in the reagent-synthesized one. Besides, the former had more active surface oxygens (207.9 μmol/g) than the latter (183.1 μmol/g). Furthermore, the sludge-derived spinel was coated on a monolithic honeycomb, which were also effective in catalytic oxidization of toluene. The main results of this work were in favor of high-value-added utilization of hazardous solid waste and promoting its real industry application.

Recent Progress of Thermocatalytic and Photo/Thermocatalytic Oxidation for VOCs Purification over Manganese-based Oxide Catalysts

Volatile organic compounds (VOCs) are one of the main sources of air pollution, which are of wide concern because of their toxicity and serious threat to the environment and human health. Catalytic oxidation has been proven to be a promising and effective technology for VOCs abatement in the presence of heat or light. As environmentally friendly and low-cost materials, manganese-based oxides are the most competitive and promising candidates for the catalytic degradation of VOCs in thermocatalysis or photo/thermocatalysis. This article summarizes the research and development on various manganese-based oxide catalysts, with emphasis on their thermocatalytic and photo/thermocatalytic purification of VOCs in recent years in detail. Single manganese oxides, manganese-based oxide composites, as well as improving strategies such as morphology regulation, heterojunction engineering, and surface decoration by metal doping or universal acid treatment are reviewed. Besides, manganese-based monoliths for practical VOCs abatementare also discussed. Meanwhile, relevant catalytic mechanisms are also summarized. Finally, the existing problems and prospect of manganese-based oxide catalysts for catalyzing combustion of VOCs are proposed.

Insight into the effect of manganese substitution on mesoporous hollow spinel cobalt oxides for catalytic oxidation of toluene

The cobalt oxides and manganese oxides have high-activity potential for catalytic oxidation of volatile organic compounds (VOCs), while the mesoporous hollow morphology is crucial to the mass transfer of reactant and product. Therefore, it is worth investigating the effect of manganese substitution in mesoporous hollow cobalt oxides on catalytic oxidation. Herein, a partially disordered spinel structure is formed by the Mn substitution in Co₃O₄ and the mesoporous hollow microsphere is improved in morphology homogeneity with the decrease of Co/Mn ratio in the range of 1.8-28.8. The 5Co1Mn (Mn-substituted Co₃O₄ with Co/Mn at 5.4) exhibits outstanding catalytic activity for toluene oxidation with 50% CO₂ generation at 237 °C, which is 21 °C lower than Co₃O₄. Moreover, the 5Co1Mn displays satisfactory stability in reusability, lifetime, and water resistance. The small defective crystallite, mesoporous hollow morphology, and high specific surface area endow Mn-substituted Co₃O₄ with more surface chemical adsorbed oxygen, enhancing the catalytic oxidation of toluene. Theoretical calculation on (311) plane of Co₃O₄ reveals that Mn²⁺ or Mn³⁺ substitution increases the formation energy of oxygen vacancy and makes it difficult to adsorb gaseous oxygen on the defective surface. The interaction between Co and Mn impedes the improvement of toluene oxidation because the mobility of lattice oxygen, the surface distribution of Co³⁺, and the ratio of surface adsorbed oxygen to surface lattice oxygen are hindered by Mn substitution. The chemical adsorbed oxygen is more active than lattice oxygen in the oxidation of adsorbed intermediates (phenolate, benzoate species, etc.). The Langmuir-Hinshelwood mechanism dominates in the catalytic oxidation at 200-250 °C, while the catalytic oxidation follows both the Langmuir-Hinshelwood mechanism and Mars-van Krevelen mechanism above 250 °C. This work provides some enlightenment for exploring the role of surface oxygen species in VOCs oxidation and uncovering the interaction in binary spinel oxides.