Aqueous TiO2 Nanoparticles React by Proton-Coupled Electron Transfer

Decoupling of Light and Dark Reactions in a 2D Niobium Tungstate for Light-Induced Charge Storage and On-Demand Hydrogen Evolution

The direct coupling of light harvesting and charge storage in a single material opens new avenues to light storing devices. Here we demonstrate the decoupling of light and dark reactions in the two-dimensional layered niobium tungstate (TBA)+(NbWO6)- for on-demand hydrogen evolution and solar battery energy storage. Light illumination drives Li+/H+ photointercalation into the (TBA)+(NbWO6)- photoanode, leading to small polaron formation assisted by structural distortions on the WOx sublattice, along with a light-induced decrease in material resistance over 2 orders of magnitude compared to the dark. The photogenerated electrons can be extracted on demand to produce solar hydrogen upon the addition of a Pt catalyst. Alternatively, they can be stored for over 20 h under oxygen-free conditions after 365 nm UV illumination for only 10 min, thus featuring a solar battery anode with promising capacity and long-term stability. The optoionic effects described herein offer new insights to overcome the intermittency of solar irradiation, while inspiring applications at the interface of solar energy conversion and energy storage, including solar batteries, "dark" photocatalysis, solar battolyzers, and photomemory devices.

Hydrogen on Colloidal Gold Nanoparticles

Colloidal gold nanoparticles (AuNPs) have myriad scientific and technological applications, but their fundamental redox chemistry is underexplored. Reported here are titration studies of oxidation and reduction reactions of aqueous AuNP colloids, which show that the AuNPs bind substantial hydrogen (electrons + protons) under mild conditions. The 5 nm AuNPs are reduced to a similar extent with reductants from borohydrides to H2 and are reoxidized back essentially to their original state by oxidants, including O2. The reactions were monitored via surface plasmon resonance (SPR) optical absorption, which was shown to be much more sensitive to surface H than to changes in solution conditions. Reductions with H2 occurred without pH changes, demonstrating that hydrogenation forms surface H rather than releasing H+. Computational studies suggested that an SPR blueshift was expected for H atom addition, while just electron addition likely would have caused a redshift. Titrations consistently showed a maximum redox change of the 5 nm NPs, independent of the reagent, corresponding to 9% of the total gold or ∼30% hydrogen surface coverage (∼370 H per AuNP). Larger AuNPs showed smaller maximum fractional surface coverages. We conclude that H binds to the edge, corner, and defect sites of the AuNPs, which explains the stoichiometric limitation and the size effect. The finding of substantial and stable hydrogen on the AuNP surface under mild reducing conditions has potential implications for various applications of AuNPs in reducing environments, from catalysis to biomedicine. This finding contrasts with the behavior of bulk gold and with the typical electron-focused perspective in this field.

Photoelectrochemical Proton-Coupled Electron Transfer of TiO2 Thin Films on Silicon

TiO2 thin films are often used as protective layers on semiconductors for applications in photovoltaics, molecule-semiconductor hybrid photoelectrodes, and more. Experiments reported here show that TiO2 thin films on silicon are electrochemically and photoelectrochemically reduced in buffered acetonitrile at potentials relevant to photoelectrocatalysis of CO2 reduction, N2 reduction, and H2 evolution. On both n-type Si and irradiated p-type Si, TiO2 reduction is proton-coupled with a 1e-:1H+ stoichiometry, as demonstrated by the Nernstian dependence of the Ti4+/3+ E1/2 on the buffer pKa. Experiments were conducted with and without illumination, and a photovoltage of ∼0.6 V was observed across 20 orders of magnitude in proton activity. The 4 nm films are almost stoichiometrically reduced under mild conditions. The reduced films catalytically transfer protons and electrons to hydrogen atom acceptors, based on cyclic voltammogram, bulk electrolysis, and other mechanistic evidence. TiO2/Si thus has the potential to photoelectrochemically generate high-energy H atom carriers. Characterization of the TiO2 films after reduction reveals restructuring with the formation of islands, rendering TiO2 films as a potentially poor choice as protecting films or catalyst supports under reducing and protic conditions. Overall, this work demonstrates that atomic layer deposition TiO2 films on silicon photoelectrodes undergo both chemical and morphological changes upon application of potentials only modestly negative of RHE in these media. While the results should serve as a cautionary tale for researchers aiming to immobilize molecular monolayers on "protective" metal oxides, the robust proton-coupled electron transfer reactivity of the films introduces opportunities for the photoelectrochemical generation of reactive charge-carrying mediators.

Tandem Hydroperoxyl-Alkylperoxyl Radical Quenching by an Engineered Nanoporous Cerium Oxide Nanoparticle Macrostructure (NCeONP): Toward Efficient Solid-State Autoxidation Inhibitors

The use of nanomaterials as inhibitors of the autoxidation of organic materials is attracting tremendous interest in petrochemistry, food storage, and biomedical applications. Metal oxide materials and CeO2 in particular represent one of the most investigated inorganic materials with promising radical trapping and antioxidant abilities. However, despite the importance, examples of the CeO2 material's ability to retard the autoxidation of organic substrates are still lacking, together with a plausible chemical mechanism for radical trapping. Herein, we report the synthesis of a new CeO2-derived nanoporous material (NCeONP) with excellent autoxidation inhibiting properties due to its ability to catalyze the cross-dismutation of alkyl peroxyl (ROO•) and hydroperoxyl (HOO•) radicals, generated in the system by the addition of the pro-aromatic hydrocarbon γ-terpinene. The antioxidant ability of NCeONP is superior to that of other nanosized metal oxides, including TiO2, ZnO, ZrO2, and pristine CeO2 nanoparticles. Studies of the reaction with a sacrificial reductant allowed us to propose a mechanism of inhibition consisting of H atom transfer from HOO• to the metal oxides (MOx + HOO• → MOx-H• + O2), followed by the release of the H atom to an ROO• radical (MOx-H• + ROO• → MOx + ROOH). Besides identifying NCeONP as a promising material for developing effective antioxidants, our study provides the first evidence of a radical mechanism that can be exploited to develop novel solid-state autoxidation inhibitors.

Bonds over Electrons: Proton Coupled Electron Transfer at Solid-Solution Interfaces

This Perspective argues that most redox reactions of materials at an interface with a protic solution involve net proton-coupled electron transfer (PCET) (or other cation-coupled ET). This view contrasts with the traditional electron-transfer-focused view of redox reactions at semiconductors, but redox processes at metal surfaces are often described as PCET. Taking a thermodynamic perspective, transfer of an electron is typically accompanied by a stoichiometric proton, much as the chemistry of lithium-ion batteries involves coupled transfers of e^- and Li⁺. The PCET viewpoint implicates the surface-H bond dissociation free energy (BDFE) as the preeminent energetic parameter and its conceptual equivalents, the electrochemical ne^-/nH⁺ potential versus the reversible hydrogen electrode (RHE) and the free energy of hydrogenation, ΔG°_H. These parameters capture the thermochemistry of PCET at interfaces better than electronic parameters such as Fermi energies, electron chemical potentials, flat-band potentials, or band-edge energies. A unified picture of PCET at metal and semiconductor surfaces is presented. Exceptions, limitations, implications, and future directions motivated by this approach are described.

Surface modification of TiO2 nanoparticles with organic molecules and their biological applications

In recent years, titanium(IV) dioxide nanoparticles (TiO₂NPs) have shown promising potential in various biological applications such as antimicrobials, drug delivery, photodynamic therapy, biosensors, and tissue engineering. For employing TiO₂NPs in these fields, their nanosurface must be coated or conjugated with organic and/or inorganic agents. This modification can improve their stability, photochemical properties, biocompatibility, and even surface area for further conjugation with other molecules such as drugs, targeting molecules, polymers, etc. This review describes the organic-based modification of TiO₂NPs and their potential applications in the mentioned biological fields. In the first part of this review, around 75 recent publications (2017-2022) are mentioned on the common TiO₂NP modifiers including organosilanes, polymers, small molecules, and hydrogels, which improve the photochemical features of TiO₂NPs. In the second part of this review, we presented 149 recent papers (2020-2022) about the use of modified TiO₂NPs in biological applications, in which specific bioactive modifiers are introduced in this part with their advantages. In this review, the following information is presented: (1) the common organic modifiers for TiO₂NPs, (2) biologically important modifiers and their benefits, and (3) recent publications on biological studies on the modified TiO₂NPs with their achievements. This review shows the paramount significance of the organic-based modification of TiO₂NPs to enhance their biological effectiveness, paving the way toward the development of advanced TiO₂-based nanomaterials in nanomedicine.

Regioselectivity of concerted proton-electron transfer at the surface of a polyoxovanadate cluster

Proton-coupled electron transfer (PCET) is an important process in the activation and reactivity of metal oxide surfaces. In this work, we study the electronic structure of a reduced polyoxovanadate-alkoxide cluster bearing a single bridging oxide moiety. The structural and electronic implications of the incorporation of bridging oxide sites are revealed, most notably resulting in the quenching of cluster-wide electron delocalization in the most reduced state of the molecule. We correlate this attribute to a change in regioselectivity of PCET to the cluster surface (e.g. reactivity at terminal vs. bridging oxide groups). Reactivity localized at the bridging oxide site enables reversible storage of a single H-atom equivalent, changing the stoichiometry of PCET from a 2e-/2H+ process. Kinetic investigations indicate that the change in site of reactivity translates to an accelerated rate of e-/H+ transfer to the cluster surface. Our work summarizes the role which electronic occupancy and ligand density play in the uptake of e-/H+ pairs at metal oxide surfaces, providing design criteria for functional materials for energy storage and conversion processes.

Photoactivation of titanium-oxo cluster [Ti6O6(OR)6(O2C t Bu)6]: mechanism, photoactivated structures, and onward reactivity with O2 to a peroxide complex

The molecular titanium-oxo cluster [Ti₆O₆(OⁱPr)₆(O₂C ^t Bu)₆] (1) can be photoactivated by UV light, resulting in a deeply coloured mixed valent (photoreduced) Ti (iii/iv) cluster, alongside alcohol and ketone (photooxidised) organic products. Mechanistic studies indicate that a two-electron (not free-radical) mechanism occurs in this process, which utilises the cluster structure to facilitate multielectron reactions. The photoreduced products [Ti₆O₆(OⁱPr)₄(O₂C ^t Bu)₆(sol)₂], sol = ⁱPrOH (2) or pyridine (3), can be isolated in good yield and are structurally characterized, each with two, uniquely arranged, antiferromagnetically coupled d-electrons. 2 and 3 undergo onward oxidation under air, with 3 cleanly transforming into peroxide complex, [Ti₆O₆(OⁱPr)₄(O₂C ^t Bu)₆(py)(O₂)] (5). 5 reacts with isopropanol to regenerate the initial cluster (1) completing a closed cycle, and suggesting opportunities for the deployment of these easily made and tuneable clusters for sustainable photocatalytic processes using air and light. The redox reactivity described here is only possible in a cluster with multiple Ti sites, which can perform multi-electron processes and can adjust its shape to accommodate changes in electron density.

Changing the reaction pathway in TiO2 photocatalytic dehalogenation of halogenated aromatic pollutants by surface hydroxyl regulation

Understanding the photocatalytic reductive dehalogenation mechanism of halogenated aromatic pollutants is of great research value. However, the proton source in the photocatalytic dehalogenation process of representative halogenated aromatic pollutants by TiO₂ is not clear. In this study, the TiO₂ surface was modified by hydrochloric acid, sodium hydroxide, and sodium fluoride to obtain TiO₂ samples with different hydroxyl groups. It was found that the hydroxyl groups on the surface of TiO₂ affects the sequence of proton and electron transfer in dehalogenation. The abundance of hydroxyl groups on the surface of TiO₂ can accelerate the reductive dehalogenation process of representative halogenated aromatic pollutants. The kinetic solvent isotope effect was used to study the proton-coupled electron transfer process in the reaction. It shows that the enriching of protons on TiO₂ bridging oxygen (bridging hydroxyl groups) is conducive to the rapid step of protonation of the reactant, and subsequent proton and electron transfer. On the contrary, the bridging hydroxyl groups can be removed by reacting with strongly basic sodium hydroxide and sodium ions can occupy the bridging oxygen. The substitution of bridging oxygen by fluorine ions can also lead to the destruction of bridge hydroxyl groups. Significantly, the absence of bridging hydroxyl groups on titanium dioxide will lead to the dehalogenation of representative halogenated aromatic pollutants initiated by electron transfer. This study is helpful to understand dehalogenation reaction paths catalyzed by TiO₂.