Anionic Lanthanide Metal–Organic Frameworks: Selective Separation of Cationic Dyes, Solvatochromic Behavior, and Luminescent Sensing of Co(II) Ion

Gd-MOF-Derived GdS/C for the Modification of Separators in Lithium-Sulfur Batteries

Because of its excellent energy density and specific capacity, lithium-sulfur batteries (LSBs) are considered one of the most promising energy storage devices. However, the shuttle effect and slow transformation of polysulfides hinder their practical application. To address the shuttle effect, we used a Gd-MOF precursor for high-temperature carbonization to obtain GdS@C composite as a modification layer for LSB separators. The strong affinity of metal sulfide to sulfur enhances the chemical anchoring of polysulfides and catalyzes their transformation. By employing GdS@C as the separator modification material, we effectively suppressed the shuttle effect and improved electrochemical performance. Under a sulfur load of 3 mg cm-2, the initial discharge specific capacity with GdS@C-modified separator was 888.9 mAh g-1 at 0.5 C; after 500 cycles, it remained at 435.6 mAh g-1 with a capacity retention rate of 49.0%. With an increased sulfur loading to 5 mg cm-2, the first cycle discharge specific capacity at 0.1 C reached 908.4 mAh g-1; after 100 cycles, it was still at 743.9 mAh g-1 with an impressive retention rate of 81.9%. These results demonstrate that GdS@C composite material significantly enhances the electrochemical performance of LSBs and showcases its broad application potential.

Time-Resolved Levodopa Cascade Polymerization Tuned by Bimetallic MOF Fluorescent Nanozyme and Boric Acid for Butyrylcholinesterase Activity Dual-Mode Assay

A ratiometric fluorescence-photothermal dual-mode assay method is constructed for the detection of butyrylcholinesterase (BChE) activity based on time-resolved levodopa (L-DOPA) cascade polymerization. First, a newly designed bimetallic metal-organic framework (MOF), Eu/Co-DPA (DPA: pyridine-2,6-dicarboxylic acid), is screened out as a fluorescent nanozyme with high catalytic activity and superior luminescence properties. In the presence of boric acid (BA), L-DOPA forms BA-esterified L-DOPA, which is catalyzed by Eu/Co-DPA to form the oligomers with strong blue fluorescence. Meanwhile, the red fluorescence of Eu/Co-DPA is quenched by the oligomers, generating a sensitive turn-on/off ratiometric fluorescence response. As polymerization time increases, Eu/Co-DPA cleaves the borate ester bonds to expose the catechol structures of the oligomers, which facilitates the further oxidation and polymerization of the oligomers, promoting the formation of poly(L-DOPA) nanoparticles with a high photothermal conversion efficiency (30.33%). Then, by using thiocholine (butyrylthiocholine enzymolysis product) to inhibit the catalytic activity of Eu/Co-DPA, BChE activity is detected through the change in fluorescence and photothermal dual signals. Both assay modes have low detection limits (0.021 and 0.024 U L-1) and high accuracy (93.3-105.3% recovery). The detection results of real human serum indicate that both assay modes show 100.0% agreement with the standard method. To our knowledge, this work first combines bimetallic MOFs and a BA regulator to tune the structure of L-DOPA polymers, providing a pathbreaking paradigm for preparing catecholamine-based fluorescence-photothermal organic polymers.

Synthesis of highly sensitive and multi-response Eu-MOF, fluorescence sensing properties and anti-counterfeiting applications

A new Europium metal-organic framework (Eu-MOF), namely [Eu(dpa) (H2O)]·0.5(bpy)·4H2O}n (H4dpa = 5-(3,4-dicarboxyphenoxy) isophenic acid, bpy = protonated 4,4'-bipyridine) was synthesized and structurally characterized by elemental analyses, infrared spectroscopy, and X-ray single-crystal diffraction analyses. Eu-MOF shows a three-dimensional network structure based on EuIII ions and (dpa)4- ligands via µ4: η1, η2, η2, η2 coordination mode. Fluorescence analysis shows that Eu-MOF has excellent fluorescence sensing characteristics, which can efficiently and sensitively detect various pollutants in water: the limit of detection (LOD) of ratiometric fluorescence detection of ANI in water was 42.9 nM, which was better than the single-peak detection limit. In addition, the peak detection limits of Eu-MOF for Flu, ORN and NB were 120 nM, 27 nM and 94 nM, respectively. In addition, XPS, LUMO orbital energy level, fluorescence lifetime, ultraviolet absorption and other principles are used to explore the mechanism of fluorescence quenching. Surprisingly, Eu-MOF not only has excellent anti- counterfeiting ability and stability, can be used as anti-counterfeiting material in life, but also has good selectivity to Flu. Eu-MOF has obvious fluorescence quenching effect on Flu on paper under ultraviolet light, which can be used for rapid in situ imaging test paper of pesticide residues.

Pyrene-Based Metal-Organic Frameworks with Coordination-Enhanced Electrochemiluminescence for Fabricating a Biosensing Platform

Enhancing the electrochemiluminescence (ECL) properties of polycyclic aromatic hydrocarbons (PAHs) is a significant topic in the ECL field. Herein, we elaborately chose PAH derivative luminophore 1,3,6,8-tetrakis(p-benzoic acid)pyrene (H4TBAPy) as the organic ligand to synthesize a new Ru-complex-free ECL-active metal-organic framework Dy-TBAPy. Interestingly, Dy-TBAPy exhibited a more brilliant ECL emission and higher ECL efficiency than H4TBAPy aggregates. On the one hand, TBAPy luminophores were assembled into rigid MOF skeleton via coordination bonds, which not only enlarged the distance between pyrene cores to eliminate the aggregation-caused quenching (ACQ) effect but also obstructed the intramolecular motions of TBAPy to diminish the nonradiative relaxation, thus realizing a remarkable coordination-enhanced ECL. On the other hand, the ultrahigh porosity of Dy-TBAPy was beneficial to the diffusion of electrons, ions, and coreactant (S2O82-) in the skeleton, which efficiently boosted the excitation of interior TBAPy luminophores and led to a high utilization ratio of TBAPy, further improving ECL properties. More intriguingly, the ECL intensity of the Dy-TBAPy/S2O82- system was about 4.1, 87.0-fold higher than those of classic Ru(bpy)32+/TPrA and Ru(bpy)32+/S2O82- systems. Considering the aforementioned fabulous ECL performance, Dy-TBAPy was used as an ECL probe to construct a supersensitive ECL biosensor for microRNA-21 detection, which showed an ultralow detection limit of 7.55 aM. Overall, our study manifests that coordinatively assembling PAHs into MOFs is a simple and practicable way to improve ECL properties, which solves the ACQ issue of PAHs and proposes new ideas for developing highly efficient Ru-complex-free ECL materials, therefore providing promising opportunities to fabricate high-sensitivity ECL biosensors.

A Multifunctional CaII-EuIII Heterometallic Organic Framework with Sensing and Selective Adsorption in Water

With increasing global industrialization, it is urgent and challenging to develop multifunctional species for detection and adsorption in the environment. For this purpose, a novel anionic heterometallic organic framework, [(CH3)2NH2][CaEu(CAM)2(H2O)2]·4H2O·4DMF (CaEuCAM), is hydrothermally synthesized based on chelidamic acid (H3CAM). Single crystal analysis shows that CaEuCAM features two different oxygen-rich channels along the c-axis in which one CAM3- bridges two sextuple-coordinated Ca2+ and two octuple-coordinated Eu3+ with a μ4-η1: η1: η1: η1: η1: η1 new chelating and bridging mode. The characteristic bright red emission and superior hydrostability of CaEuCAM under harsh acidic and basic conditions benefit it by acting as a highly sensitive sensor for Fe3+ and 3-nitrophenol (3-NP) with extremely low LODs through remarkable quenching. The combination of experiments and theoretical calculations for sensing mechanisms shows that the competitive absorption and interaction are responsible for Fe3+-induced selective emission quenching, while that for 3-NP is the result of the synergism of host-guest chemistry and the inner filter effect. Meanwhile, the assimilation of negative charge plus channels renders CaEuCAM a highly selective adsorbent for methylene blue (MB) due to a synergy of electrostatic affinity, ion-dipole interaction, and size matching. Of note is the reusability of CaEuCAM toward Fe3+/3-NP sensing and MB adsorption besides its fast response. These findings could be very useful in guiding the development of multifunctional Ln-MOFs for sensing and adsorption applications in water media.

Tuning the Cerium-Based Metal-Organic Framework Formation by Template Effect and Precursor Selection

The novel metal-organic framework [(CH3)2NH2]2[Ce2(bdc)4(DMF)2]·2H2O (Ce-MOF, H2bdc-terephthalic acid, DMF-N,N-dimethylformamide) was synthesized by a simple solvothermal method. Ce-MOF has 3D connectivity of bcu type with a dinuclear fragment connected with eight neighbors, while three types of guest species are residing in its pores: water, DMF, and dimethylammonium cations. Dimethylamine was demonstrated to have a decisive templating effect on the formation of Ce-MOF, as its deliberate addition to the solvothermal reaction allows the reproducible synthesis of the new framework. Otherwise, the previously reported MOF Ce5(bdc)7.5(DMF)4 (Ce5) or its composite with nano-CeO2 (CeO2@Ce5) was obtained. Various Ce carboxylate precursors and synthetic conditions were explored to evidence the major stability of Ce-MOF and Ce5 within the Ce carboxylate-H2bdc-DMF system. The choice of precursor impacts the surface area of Ce-MOF and thus its reactivity in an oxidative atmosphere. The in situ PXRD and TG-DTA-MS study of Ce-MOF in a nonoxidative atmosphere demonstrates that it eliminates H2O and DMF along with (CH3)2NH guest species in two distinct stages at 70 and 250 °C, respectively, yielding [Ce2(bdc)3(H2bdc)]. The H2bdc molecule is removed at 350 °C with the formation of novel modification of Ce2(bdc)3, which is stable at least up to 450 °C. According to the total X-ray scattering study with pair distribution function analysis, the most pronounced local structure transformation occurs upon departure of DMF and (CH3)2NH guest species, which is in line with the in situ PXRD experiment. In an oxidative atmosphere, Ce-MOF undergoes combustion to CeO2 at a temperature as low as 390 °C. MOF-derived CeO2 from Ce-MOF, Ce5, and CeO2@Ce5 exhibits catalytic activity in the CO oxidation reaction.

Multifunctional Lanthanide Metal-Organic Frameworks Based on -NH2 Modified Ligand: Fluorescent Ratio Probe, CrO42- Ions Adsorption, and Photocatalytic Property

In response to the growing concern for environmental pollution, two lanthanide compounds {[Ln(L)(H2O)]·4H2O}n (where Ln = Tb and Gd, H3L = 1-amino-2,4,6-benzene tricarboxylic acid) were synthesized using a -NH2 modified ligand and systematically characterized. Both compounds exhibit remarkable fluorescence response, adsorption of CrO42- ions, and photocatalytic degradation properties, as well as exceptional acid-base and thermal stability. Remarkably, the pH-dependent 1-Tb exhibits exceptional performance as a fluorescent probe for detecting Fe3+ and CrO42-/Cr2O72- ions in aqueous solutions, while also serving as a ratiometric fluorescent probe for the detection of Cr3+, offering rapid response, high sensitivity, selectivity, and recoverability advantages in application. Moreover, 1-Tb exhibits excellent detection capabilities and displays effective adsorption of CrO42- ions, with a maximum adsorption capacity of 230.71 mg/g. On the other hand, 1-Gd exhibits superior performance compared to 1-Tb in the photocatalytic degradation of antibiotics. The degradation mechanism is further elucidated by conducting experiments with DFT theoretical calculations.

A portable test strip fabricated of luminescent lanthanide-functionalized metal-organic frameworks for rapid and visual detection of tetracycline antibiotics

Tetracycline antibiotics (TCs) are commonly used antibiotics in the treatment of infections, but their overuse has a negative impact on human health and ecosystems. Thus, the development of a facile and on-site visualization method for TC detection is necessary. Here, we propose the potential of using lanthanide-functionalized metal-organic framework (MOF) composites (Ag+/Tb3+@UiO-66-(COOH)2, ATUC) as a probe for the rapid detection of tetracycline (TC), chlortetracycline (CTC), oxytetracycline (OTC), and doxycycline (DOX) residues, in which UiO-66-(COOH)2 (UC) could be utilized to provide an interaction microenvironment, Tb3+ as recognition units and Ag+ as a fluorescence enhancer. Upon exposure to TCs, significant luminescence quenching of ATUC excited at 255 nm was observed due to the inner filter effect (IFE) and photo-induced electron transfer (PET), and the established strategy has a detection limit (LOD) of 11.0, 20.1, 9.1, and 22.5 nM for TC, CTC, OTC, and DOX, respectively. More importantly, given its portability and conspicuous luminescence color gradation variation, a portable test strip based on ATUC was manufactured and the results could be distinguished immediately by the naked eye and smartphone analysis, allowing for on-site rapid quantitative assay of TCs, not only in the laboratory but also in a point-of-care setting.

A novel spectroscopic technique for studying metal-organic frameworks based on Mie scattering

Metal-organic frameworks (MOFs) are promising candidates for a wide range of applications, and spectroscopic techniques are important tools for analyzing their structures and properties. Here, we propose a novel and general scattering spectroscopic approach to study various MOFs such as zeolitic imidazolate frameworks (ZIF-67 and ZIF-8), HKUST-1, Co-based MOF (Co-MOF), and Ni-based MOF (Ni-MOF) based on their inherent Mie scattering properties. We show that by using a dark-field microscope, the inherent scattering colors and spectra can be obtained, which are mainly from the high-order magnetic and electric resonant modes. The scattering capacities are dependent on the chemical structures for producing polarized charges and internal circular displacement currents. Additionally, all the MOFs are capable of responding to solvent guests due to their high porosity, and the scattering peaks are in a linear correlation with solvent refractive indices, displaying scattering solvatochromic behaviors. Our results open up a powerful and universal avenue for visually studying the host-guest interactions in MOFs.

Ionic metal-organic frameworks (iMOFs): progress and prospects as ionic functional materials

Metal-organic frameworks (MOFs) have been a research hotspot for the last two decades, witnessing an extraordinary upsurge across various domains in materials chemistry. Ionic MOFs (both anionic and cationic MOFs) have emerged as next-generation ionic functional materials and are an important subclass of MOFs owing to their ability to generate strong electrostatic interactions between their charged framework and guest molecules. Furthermore, the presence of extra-framework counter-ions in their confined nanospaces can serve as additional functionality in these materials, which endows them a significant advantage in specific host-guest interactions and ion-exchange-based applications. In the present review, we summarize the progress and future prospects of iMOFs both in terms of fundamental developments and potential applications. Furthermore, the design principles of ionic MOFs and their state-of-the-art ion exchange performances are discussed in detail and the future perspectives of these promising ionic materials are proposed.

Blue-Emitting Ligand-Mediated Assembly of Rare-Earth MOFs toward White-Light Emission, Sensing, Magnetic, and Catalytic Studies

New lanthanide carboxylate compounds with two- (2D) and three-dimensional (3D) structures have been prepared by employing 2,5-bis(prop-2-yn-1-yloxy)terephthalic acid (2,5-BPTA) as an organic linker. The compounds, [Ln(C₁₄H₈O₆)(C₇O₃H₄)·2H₂O]·4(H₂O), Ln = Y, Pr, Nd, Sm, Eu, Gd, Tb, Dy and [Ln(C₇O₃H₄)₃·(C₃H₇ON)·(H₂O)]·2(H₂O)(C₃H₇NO), Ln = La, Ce, Pr, have two- and three-dimensional structures, respectively. In all compounds, lanthanide ions are connected together, forming a dimer, which is connected by the 2,5-BPTA ligand. In the two-dimensional structure, there are two 2,5-BPTA moieties present, and in the three-dimensional structure, there are three 2,5-BPTA moieties present. The lanthanide centers are nine-coordinated, the 2D structure has a tricapped trigonal prismatic arrangement, and the 3D structure has a monocapped distorted square antiprismatic arrangement. The Pr compound forms in both 2D and 3D structures, whose formation depends on the time of the reaction (2 days─2D and 5-6 days─3D). The ligand emits in the blue region, and using the characteristic emission of Eu³⁺ (red) and Tb³⁺ (green) ions, we achieve white light emission in the (Y_0.96Tb_0.02Eu_0.02) compound. The overall quantum yield for the white light emission is 28%. The strong green luminescence of the Tb³⁺-containing compound was employed to selectively sense the Cr³⁺ and Fe³⁺ ions in aqueous solution with limits of detection (LODs) at 0.41 and 8.6 ppm, respectively. The Tb compound was found to be a good heterogeneous catalyst for the Ullman-type O-arylation reaction between phenol and bromoarene with yields of 95%. Magnetic studies on the Gd-, Tb-, and Dy-containing compounds showed weak exchange interactions within the dimeric Ln₂ units. The present work demonstrates the many utilities of the rare-earth-containing MOFs, especially toward white-light emission, metal-ion sensing, and heterogeneous catalysis.

Fabrication of Two Isomorphic and Hyperstable Rare Earth-Based Metal-Organic Frameworks with Efficient Ratiometric Probe and Photocatalytic Performances

Two isomorphic lanthanide compounds {[Ln(ddpp)(H₂O)]·CH₃CN}_n (Ln = Eu and Gd, H₄ddpp = 2,5-di(2',4'-dicarboxylphenyl)pyridine) were synthesized. Complex 1-Eu displays ultrahigh acid-base stability and thermal stability. Furthermore, luminescence measurements revealed that 1-Eu could detect quinolone antibiotics with an ultralow limit of detection in aqueous solution. The ratiometric probe properties for sensing antibiotics could be attributed to the incompletely sensitized Eu³⁺ ion of the ligand. Remarkably, it is interesting that 1-Gd exhibits excellent tetracycline degradation properties under visible light. Ultraviolet-visible diffuse reflectance spectroscopy and valence band X-ray photoelectron spectroscopy were carried out to investigate the photodegradation mechanisms. Moreover, a rational explanation for the fluorescent probe and photocatalysis behavior of these two complexes was also discussed with the assistance of density functional theory calculations.

Encapsulation-Led Adsorption of Neutral Dyes and Complete Photodegradation of Cationic Dyes and Antipsychotic Drugs by Lanthanide-Based Macrocycles

Molecular architectures offering large cavities can accommodate guest molecules, while their compositional engineering allows tunability of the band gap to support photocatalysis using visible light. In this work, two lanthanide (Ln)-based macrocycles, synthesized using a cobalt-based metalloligand and offering large rectangular cavities, exhibited selective adsorption of neutral dyes over both anionic and cationic dyes. Both Ln macrocycles illustrated complete photodegradation of cationic dyes using visible light without the use of any oxidant. Both Ln macrocycles exhibited complete photodegradation of not only cationic dyes but also a few phenothiazine-based antipsychotic drugs. Photocatalysis involved the generation of reactive oxygen species (ROS), which was corroborated with the band gap of two Ln macrocycles. These results were supported by radical scavenger studies and the quantitative estimation of superoxide and hydroxyl radicals. Complete photodegradation of both dyes and drugs was confirmed by spectral studies, while the generation of CO₂ and N₂ gases was established by gas chromatography. Importantly, Ln macrocycles were able to distinguish between the neutral dyes that were quantitatively adsorbed and the cationic dyes/drugs that were completely photodegraded.

Multifunctional lanthanide MOF luminescent sensor built by structural designing and energy level regulation of a ligand

In order to reduce usage cost and simplify the detection process, it is necessary to develop multifunctional and multi-emitter Ln-MOF luminescent sensors.

Two mesoporous anionic metal-organic frameworks for selective and efficient adsorption of a cationic organic dye

Anionic metal-organic frameworks (MOFs) are beginning to have a great impact in the field of absorption and separation of ionic organic molecules due to the enhanced electrostatic interactions between their anionic frameworks and counter-ionic guests. Herein, the rational design and synthesis of two mesoporous anionic MOFs, [Zn₃(ITTC)₃](Me₂ NH₂)₃·3DMF·H₂O (1) and [Cd₂(ITTC)₃](Me₂NH₂)₅·2DMF (2), where H₃ITTC = 4,4',4''-(1H-imidazole-2,4,5-triyl) tribenzoic acid, is reported. Structural analysis revealed that both materials are anionic MOFs with a 2-fold interpenetrating three dimensional (3D) framework. The cross sectional area of the open one-dimensional rectangular channels is 31.7 Å × 15.6 Å for 1, of which the architecture is indicative of an unprecedented (3,3,4,5)-connection topology. For 2, the diameter of the open one-dimensional regular hexagonal channel is about 34.1 Å, decorated with uncoordinated carboxyl O atoms, and the framework exhibits a (3,4)-connected fcu network. Due to their anionic frameworks and bulky pore window sizes, both MOFs can be employed for absorbing and separating the cationic organic dye methylene blue (MB). The results reveal that both MOFs have better dye adsorption selectivity for MB, than for MO and SDI, because of charge and size-matching effects, enabling them to be potential candidates for use in environmental cleaning. By comparison, 2 presents superior selectivity and adsorptivity for cationic MB which depends on the presence of a basic functionalized pore surface.

Chemical sensors based on a Eu(iii)-centered periodic mesoporous organosilica hybrid material using picolinic acid as an efficient secondary ligand

Through a series of post synthetic modification methods applied to the 100% trans ethenylene-bridged Periodic Mesoporous Organosilica (ePMO), the lanthanide-functionalized hybrid nanomaterial ePMO@Eu_PA (PA = picolinic acid) has been prepared. The pristine and lanthanide-grafted ePMO materials were characterized by powder X-ray diffraction, DRIFTs, TGA, N₂ sorption, SEM and TEM. The selected PA ligand could effectively sensitize the Eu³⁺ ion, leading to the characteristic luminescence of Eu³⁺ in ePMO@Eu_PA. The luminescence properties of the ePMO@Eu_PA were studied in detail in the solid state and after dispersing in water. The material was investigated for the use as ion sensor and showed a selective monitoring of Fe³⁺, Co₂⁺ and Cu²⁺ ions with luminescence quenching. In addition, the material showed a linear relationship between the luminescence intensity and the pH value in the pH range from 7.7 to 10.2. These findings demonstrate that ePMO@Eu_PA possesses potential practical applications in ion sensing as well as in pH sensing.

Three Pbx(COO)y Cluster Frameworks Based on a Flexible Triazinetricarboxylic Acid Ligand: Syntheses, Structures, and Fluorescent Sensing Application for Nitrophenols

Three new metal-organic frameworks (MOFs), namely, [Pb₇(TTPCA)₄Cl₂]·3H₂O (1), [Pb₇(TTPCA)₄(DMA)₂(HCOO)₂]·H₂O (2), and [Pb₄(TTPCA)₃]·3DMF·2H₂O·H₃O (3), were synthesized by the H₃TTPCA ligand [H₃TTPCA = 1,1',1″-(1,3,5-triazine-2,4,6-triyl)-tripiperidine-4-carboxylic acid], with lead(II) nitrate under solvothermal conditions. They were characterized by CHN analysis, IR spectroscopy, UV-vis spectroscopy, and single-crystal and powder X-ray diffraction. In addition, their thermogravimetric analysis and fluorescence properties were studied. Compounds 1-3 were 3D MOF structures with different Pb_x(COO)_y clusters: ([Pb₇(COO)₁₂Cl₂]), ([Pb₇(COO)₁₂]), and [Pb₈(COO)₁₈]. Fluorescence detection of compounds 1-3 shows that they can act as excellent sensors of nitrophenols with a low limit of detection and a high quenching constant.

Solvent- and Temperature-Driven Photoluminescence Modulation in Porous Hofmann-Type SrII-ReV Metal-Organic Frameworks

A unique family of three-dimensional (3D) luminescent Sr^II-Re^V metal-organic frameworks (MOFs), {[Sr^II(MeOH)₅][Re^V(CN)₄(N)(bpen)_0.5]·MeOH}_n [1·MeOH; N^3- = nitrido ligand, bpen = 1,2-bis(4-pyridyl)ethane, and MeOH = methanol], {[Sr^II(MeOH)₄][Re^V(CN)₄(N)(bpee)_0.5]·2MeOH}_n [2·MeOH; bpee = 1,2-bis(4-pyridyl)ethylene], and {[Sr^II(bpy)_0.5(MeOH)₂][Re^V(CN)₄(N)(bpy)_0.5]}_n (3·MeOH; bpy = 4,4'-bipyridine), is reported. They are obtained by the molecular self-assembly of Sr²⁺ ions with tetracyanidonitridorhenate(V) metalloligands, [Re^V(CN)₄(N)]^2-, and pyridine-based organic spacers (L = bpen, bpee, bpy). Such a combination of molecular precursors results in bimetallic Sr^II-Re^V cyanido-bridged layers further bonded by organic ligands into pillared Hofmann-type coordination skeletons. Because of the formation of {Re^V-(L)-Re^V} moieties providing emissive metal-to-ligand charge-transfer states, 1·MeOH-3·MeOH exhibit solid-state room-temperature photoluminescence tunable from green to orange by the applied organic ligand. The most stable MOF of 3·MeOH, based on the alternating {Re^V-(bpy)-Re^V} and {Sr^II-(bpy)-Sr^II} linkages, exhibits three interconvertible, variously solvated phases, methanol-solvated 3·MeOH, hydrated {[Sr^II(bpy)_0.5(H₂O)₂][Re^V(CN)₄(N)(bpy)_0.5]·0.6H₂O}_n (3·H₂O), and desolvated {[Sr^II(bpy)_0.5][Re^V(CN)₄(N)(bpy)_0.5]}_n (3). Their formation was correlated with water and methanol vapor sorption properties investigated for 3·H₂O. The solvent content affects the luminescence mainly by tuning the emission energy within the series of 3·MeOH, 3·H₂O, and 3. All of the obtained compounds exhibit temperature-driven modulation of luminescence, including the shift of the emission maximum and lifetime. The thermochromic luminescent response was found to be sensitive to the presence and type of solvent in the crystal lattice. This work shows that the construction of [Re^V(CN)₄(N)]^2--based MOFs is an efficient route toward advanced solid luminophores tunable by external stimuli such as solvent or temperature.

A Facile One-Pot Approach to the Synthesis of Gd-Eu Based Metal-Organic Frameworks and Applications to Sensing of Fe3+ and Cr2O72- Ions

Gadolinium metal-organic frameworks (Gd-MOFs) and Eu-doped Gd-MOFs have been synthesized through a one-pot green approach using commercially available reagents. The 1,4-benzenedicarboxylic acid (H2-BDC) and 2,6-naphthalenedicarboxylic acid (H2-NDC) were chosen as ditopic organic linkers to build the 3D structure of the network. The Gd-MOFs were characterized using powder X-ray diffraction (XRD), FT-IR spectroscopy, field emission scanning electron microscopy (FE-SEM) and N2 adsorption-desorption analysis. The Gd-MOF structures were attributed comparing the XRD patterns, supported by the FT-IR spectra, with data reported in the literature for Ln-MOFs of similar lanthanide ionic radius. FE-SEM characterization points to the effect of the duration of the synthesis to a more crystalline and organized structure, with grain dimensions increasing upon increasing reaction time. The total surface area of the MOFs has been determined from the application of the Brunauer-Emmett-Teller method. The study allowed us to correlate the processing conditions and ditopic linker dimension to the network surface area. Both Gd-MOF and Eu-doped Gd-MOF have been tested for sensing of the inorganic ions such as Fe3+ and Cr2O72-.

Fabrication of a dual-emittingcomposite as a recyclable luminescent sensor for sensitive detection of nitrofuran antibiotics

A novel dual-emittingRhB@Zn-1composite was fabricated by encapsulating RhB into the channels ofZn-1, which can serve as a recyclable sensor for sensitive and selective detection of nitrofuran antibioticsviathe luminescence quenching process.

Tuning dimensionality between 2D and 1D MOFs by lanthanide contraction and ligand-to-metal ratio

2D/1D dimensionality tuning in LnMOFs is related to both (i) ligand-to-metal ratio and (ii) lanthanide contraction, this is only possible with Er/Tm, lighter lanthanides e.g. Pr only produced 2D MOFs, despite different ligand-to-metal ratios were used.

Switching metal complexes via intramolecular electron transfer: connections with solvatochromism

Solvent-induced color-changing phenomena exhibited by some metal complexes can illuminate key aspects of their switchable behavior.

A Dy(iii)–organic framework as a fluorescent probe for highly selective detection of picric acid and treatment activity on human lung cancer cells

A dysprosium(iii) organic framework, {[Dy(H2O)(BTCTB)]·2H2O}n (1, H3BTCTB = 3,3′,3′′-[1,3,5-benzenetriyltris(carbonylimino)]tris-benzoic acid), was synthesized through the hydrothermal reaction of Dy(NO3)3 with the C3-symmetric organic ligand H3BTCTB at 160°C for 96 h. At the same time, the sensitivity of picric acid in water medium was tested with material 1 as the fluorescent sensor. The detection limit was 0.71 µM and KSV of this experiment was 8.55 × 104 M−1, which might be attributed to the presence of abundant amide groups in the framework of 1. In addition, the treatment effect of compound 1 against the NCI-H292 lung cancer cells was evaluated. The Cell Counting Kit-8 (CCK-8) method was conducted to measure the viability of cancer cell after treated through the compound 1. The DCFH-DA was applied for the determination of ROS. The relative expression of the inflammatory genes was measured with RT-PCR. The western blotting was conducted to detect the effect of the compound against MDM-2 levels in NCI-H292 lung cancer cells. The possible binding interactions in terms of binding poses are probed by performing molecular docking simulations.

Construction of Chiral "Triple-Decker" Nd(III) Nanocluster with High NIR Luminescence Sensitivity toward Co(II)

One Nd(III) complex [Nd₃L₃(OAc)₃] (1) was synthesized from a conjugate Schiff base ligand H₂L. It shows a chiral "triple-decker" structure (1.1 × 1.2 × 1.8 nm) with Nd(III) ions sandwiched between the Schiff base ligands. 1 exhibits NIR Nd(III) luminescence, and the LMET efficiency is calculated to be 13.8%. It displays high luminescence sensitivity and selectivity to Co(II). The K_SV value and LOD of 1 to Co(II) are 9.96 × 10⁴ M^-1 and 0.97 μM, respectively.

Luminescent lanthanide metal-organic framework test strip for immediate detection of tetracycline antibiotics in water

Tetracycline antibiotics (TCs) are a kind of commonly used antibiotics for treating infections, however, the overuse of TCs has adversely affected human health and the ecosystem. Thus, detection of TCs in water is important but challenging. In this work, a luminescent lanthanide metal-organic framework (LnMOF) sensor (1) for immediate detection of oxytetracycline (OTC) and tetracycline (TC) is developed. The sensor has high acid-base and water stability. Investigation reveals that among the 27 species of antibiotics, anions and cations under investigation, 1 shows highly selective sensing towards OTC and TC, and the detection is not disturbed by the presence of other species. The limit of detection (LOD) for OTC and TC are ultra-sensitive value of 1.95 and 2.77 nM, respectively. Investigation reveals the sensing mechanism is due to the inner filter effect. Further studies reveal that the sensor can be used in real sample monitoring. More importantly, test strips based on 1 are manufactured. They are an easy-to-use, low-cost, highly selective and sensitive sensing device for detecting OTC and TC. The sensing can be distinguished immediately and easily by the naked eyes, making it an excellent candidate to monitor OTC and TC in real use.

Five naphthalene-amide-bridged Ni(ii) complexes: electrochemistry, bifunctional fluorescence responses, removal of contaminants and optimization by CVD

Five multifunctional Ni-CPs based on a new naphthalene-amide and different carboxylates were obtained and exhibited various properties. CNTs were synthesized from the precursors of CPs, showing selective removal of contaminants in water.

A heat-set lanthanide metallogel capable of emitting stable luminescence under thermal, mechanical and water stimuli

A luminescence-stable lanthanide-based metallogel prepared by a heat-set procedure.

A luminescent Eu coordination polymer with near-visible excitation for sensing and its homologues constructed from 1,4-benzenedicarboxylate and 1H-imidazo[4,5-f][1,10]-phenanthroline

Ln-CPs were constructed to achieve luminescent Eu-CP excited at a wide excitation band including the visible region for sensing.

A multi-responsive chemosensor for highly sensitive and selective detection of Fe3+, Cu2+, Cr2O72− and nitrobenzene based on a luminescent lanthanide metal–organic framework

Six Ln-MOFs have been synthesized. Eu-MOF behaves a multi-responsive luminescent chemosensor toward Fe³⁺, Cu²⁺, Cr₂O₇²⁻ and nitrobenzene with high sensitivity, selectivity and anti-interference ability. Sensing mechanisms are discussed in detail.