Hydrophilic Covalent Organic Frameworks Coated Steel Sheet As a Mass Spectrometric Ionization Source for the Direct Determination of Zearalenone and Its Derivatives

Paper-immobilized liquid-phase microextraction for direct paper spray mass spectrometry and immuno-detection of atropine in baby food, buckwheat cereals, and edible oils at regulatory levels

BACKGROUND

Atropine is a strictly regulated natural toxin. Monitoring for atropine is thus important, but often expensive and time-consuming. Moreover, the range of relevant matrices, and corresponding differences in required detection limits for atropine vary. Therefore, we developed a more simplified and affordable method, combining immunodetection and mass spectrometry to detect atropine in buckwheat, canola oil, and baby cereals at regulatory levels.

RESULTS

In this method, atropine is selectively enriched on paper using a dual-paper-immobilized liquid-phase microextraction (PI-LPME; enrichment ∼144×). One PI-LPME paper can be directly coupled to a lateral flow immunoassay, for initial screening. In case of a suspect sample, the other PI-LPME paper is transported to a laboratory, where it can be stored at room temperature (recovery >90%, no difference between 1 and 10 days of storage). The PI-LPME paper can then be analyzed with paper spray-(high resolution) mass spectrometry (PS-(HR)MS). Using atropine-d5 as internal standard, the PS-HRMS method could reach detection limits in matrix almost as low as HPLC-HRMS, respectively 1.2-2.7 μg kg-1 and 0.2-1.3 μg kg-1. Furthermore, the accuracy and precision of the PS-HRMS method was comparable to HPLC-HRMS for buckwheat cereals (precision: 8.7%-9.6% vs. 7.6%-10%, accuracy: -4.0%-17% vs. -6.7%-15%) and canola oil (precision: 6.4%-10% vs. 1%-1.8%, accuracy: -12%-7.7% vs. -2.4%-1.9%).

SIGNIFICANCE

Our paper-based workflow has the potential to aid in the fast and affordable monitoring of atropine. Importantly, the method's suitability is demonstrated for diverse matrices, and it is expected that it can be easily adapted to monitor for other food safety hazards - given the wide applicability of liquid-liquid extractions.

Ionic liquid-modified magnetic covalent organic framework for the extraction of four pyrethroids in traditional Chinese herbs

Efficient enrichment of analytes and purification of matrices are crucial for the highly sensitive detection and monitoring of pesticides in traditional Chinese herbs. This work prepared magnetic ionic liquid-controlled covalent organic framework (IL-COF@Fe3O4) as the sorbent via a simple in-situ precipitation polymerization and thiolene "click" strategy. The IL-COF@Fe3O4 exhibited remarkable adsorption performance towards pyrethroids within 5 min. The adsorption of four pyrethroids on the surface of IL-COF@Fe3O4 was according with Langmuir model and pseudo-second-order kinetic model. The adsorption energies were theoretically calculated, which were permethrin>cypermethrin>fenvalerate>bifenthrin. The modification of ILs improved extraction capacity mainly because of the interaction of imidazole and Cl or F and the pore size effect. This method was developed for the rapid extraction of four pyrethroids in Codonopsis pilosula and Angelica sinensis. The linear range was 0.05-200 μg L-1. Matrix effects were ranging from -16.14% to 9.53%, indicating the strong matrix anti-interference ability of IL-COF@Fe3O4.

Molecularly imprinted polymer based on covalent organic framework coated steel substrate as the mass spectrometric ionization source for the direct detect of aflatoxins in complex food matrices

Ambient mass spectrometry allows direct analysis of various sample types with minimal or no pretreatment. However, due to the influence of matrix effects, there are sensitivity and issues in analyzing trace analytes in complex food samples. In this work, we developed a spray mass spectrometry platform based on SSS@TPBD-TPA@MIPs (Stainless steel substrate (SSS), terephthalaldehyde (TPA), N, N, N', N'-tetrakis(p-aminophenyl)-p-phenylenediamine (TPBD), molecularly imprinted polymer (MIP)), for rapid, in situ, high-throughput, highly enrichment efficiency and highly selective trace analysis of aflatoxins. By simplifying the sample pretreatment and directly applying high voltage for ESI-MS, the analysis can be completed within 1 min. The established method base on SSS@TPBD-TPA@MIPs exhibited high sensitivity and accuracy when determine trace level AFs in maize and peanuts. The results demonstrated a good linear relationship within the range of 0.01-10 μg/L, with the determination coefficient (R2) ≥ 0.9956. The limits of detection (LODs) was 0.035-0.3 ng/mL and limits of quantitation (LOQs) was 0.12-0.99 ng/mL, with acceptable recovery rate of 82.09-115.66 % and good repeatability represented by the relative standard deviation (RSD) less than 17.43 %. Furthermore, SSS@TPBD-TPA@MIPs exhibited excellent reusability, with more than 8 repeated uses, and showed good adsorption performance.

Hydrophilic molecularly imprinted thermal-responsive polymers based sorbent for ambient ionization mass spectrometric analysis of sulfonamide antibiotics from food samples

The thermal-responsive magnetic molecularly imprinted polymer (TrMMIP) sorbent was synthesized by surface imprinting method, and then used for magnetic solid-phase extraction (MSPE) and subsequent integrated into the ion source for elution and ionization. The shrinking-strength states change of the thermal-responsive polymer chain on TrMMIP alters the wettability of the sorbent when the working temperature crosses the lower critical solution temperature (LCST) of the polymer, and thus affects its behavior of in the extraction and clean-up process. The targeted analytes could be effectively extracted due to the high selectivity of MIPs and well dispersibility of polymer chain under the open state. Additionally, a hydrophilic polymer chain wrapped on the sorbent surface further protected target substances from co-elution during cleanup. Analytical methods for sulfonamide antibiotics (SAs) detection in complex food samples (milk, honey, fish) were developed, demonstrating potential for rapid and sensitive SAs analysis in diverse food and biological samples.

An efficient PCN-224/graphene aerogel-based extraction method for monitoring the degradation of organophosphorus pesticides in juice

An efficient PCN-224/graphene aerogel modified silica (PCN-224/GA@Sil)-based extraction method was established for monitoring the degradation process of two organophosphorus pesticides (OPPs) in juice. PCN-224/GA@Sil exhibited higher surface area (307.35 m2 g-1) than graphene oxide modified silica (254.09 m2 g-1). The introduction of PCN-224 endowed the sorbent with excellent adsorption specificity towards OPPs due to the ZrˑˑˑS/O coordination bond. PCN-224 exhibited relatively higher theoretical adsorption energies of PCN-224 towards fenitrothion and fenthion were 0.68 eV and -0.31 eV. The established PCN-224/GA@Sil-HPLC method showed the linearity of 0.2-500 μg L-1 for analytes. The matrix effects in juice were 9.68 % and 3.61 % for fenitrothion and fenthion. Finally, it was used for the sample pretreatment of juice preventing interference from food matrices to monitor the degradation of two OPPs. A combination method of ultrasound and xenon lamp was adopted to degrade fenitrothion and fenthion displaying the synergistic effect (SE=2.12, 1.39).

Covalent Organic Framework-Involved Sensors for Efficient Enrichment and Monitoring of Food Hazards: A Systematic Review

The food safety issues caused by environmental pollution have posed great risks to human health that cannot be ignored. Hence, the precise monitoring of hazard factors in food has emerged as a critical concern for the food safety sector. As a novel porous material, covalent organic frameworks (COFs) have garnered significant attention due to their large specific surface area, excellent thermal and chemical stability, modifiability, and abundant recognition sites. This makes it a potential solution for food safety issues. In this research, the synthesis and regulation strategies of COFs were reviewed. The roles of COFs in enriching and detecting food hazards were discussed comprehensively and extensively. Taking representative hazard factors in food as the research object, the expression forms and participation approaches of COFs were explored, along with the effectiveness of corresponding detection methods. Finally, the development directions of COFs in the future as well as the problems existing in practical applications were discussed, which was beneficial to promote the application of COFs in food safety and beyond.

Layer-by-layer fabrication of covalent organic frameworks on stainless steel needles as solid-phase microextraction probe coupled with electrospray ionization mass spectrometry for enrichment and determination of tyrosine kinase inhibitors in biosamples

Sunitinib, N-desmethyl imatinib, dasatinib, imatinib, and bosutinib are tyrosine kinase inhibitors (TKIs) that are commonly employed in the treatment of a multitude of cancers. However, the inappropriate concentrations of TKIs can result in ineffective treatment or the emergence of multiple adverse effects. Consequently, the development of a rapid and sensitive analytical method for TKIs is of paramount importance for the safe administration of drugs. In this work, solid-phase microextraction (SPME) probe combined with an electrospray ionization mass spectrometry (ESI-MS) coupling platform was constructed for rapid and sensitive determination of TKIs. The covalent organic frameworks (COFs) coated SPME probe was made of 2,4,6-tris(4-aminophenyl)-1,3,5-triazine (TAPT) and 2,5-dibutoxyterephthalaldehyde (DBTA) by in-situ layer-by-layer chemical bonding synthesis strategy. The TAPT-DBTA-SPME probe exhibited several advantageous properties which rendered it suitable for the enrichment of TKIs. Under the optimal conditions, the developed analytical method demonstrated a broad linear range (0.05-500.00 µg/L), a low limit of detection (0.02 µg/L) and a high enrichment factor (51-203) for TKIs. The developed analytical method was successfully applied to a pharmacokinetic study of TKIs in mouse plasma and tissue matrix, demonstrating that the proposed analytical method has promise for clinical applications and metabolic monitoring.

Pore Size Adjustment Strategy for the Fabrication of Molecularly Imprinted Covalent Organic Framework Nanospheres at Room Temperature for Selective Extraction of Zearalenone in Cereal Samples

Covalent organic frameworks (COFs) are attractive adsorbents for sample pretreatment due to their unique structure and properties. However, the selectivity of COFs for the extraction of hazardous compounds is still limited due to the lack of specific interactions between COFs and targets. Herein, we report a pore size adjustment strategy for room-temperature synthesis of molecularly imprinted COF (MICOF) for selective extraction of zearalenone (ZEN) in complex food samples. The three-dimensional building block tetra(4-aminophenyl) methane was used as a functional monomer, while dialdehyde monomers with different numbers of benzene ring were used to adjust the pore size of MICOF to match with the size of ZEN molecules. The prepared MICOF gave the largest adsorption capacity of 177.2 mg g-1 and the highest imprinting factor of 10.1 for ZEN so far. MICOF was used as the adsorbent for dispersed solid-phase extraction in combination with high-performance liquid chromatography for the determination of trace ZEN in cereals. The high selectivity of the developed method allows simple aqueous standard calibration for the matrix effect-free determination of ZEN in food samples. The limit of detection and the recoveries of the developed method were 0.21 μg kg-1 and 93.7-101.4%, respectively. The precision for the determination of ZEN was less than 3.8% (RSD, n = 6). The developed method is promising for the selective determination of ZEN in complex matrices.

Recent progress of covalent organic frameworks as attractive materials for solid-phase microextraction: A review

Solid-phase microextraction (SPME) is a green, environmentally friendly, and efficient technique for sample pre-treatment. Covalent organic frameworks (COFs), a class of porous materials formed by covalent bonds, have gained prominence owing to their remarkable attributes, including large specific surface area, tunable pore size, and robust thermal/chemical stability. These characteristics have made COFs highly appealing as potential coatings for SPME fiber over the past decades. In this review, various methods used to prepare SPME coatings based on COFs are presented. These methods encompass physical adhesion, sol-gel processes, in situ growth, and chemical cross-linking strategies. In addition, the applications of COF-based SPME coating fibers for the preconcentration of various targets in environmental, food, and biological samples are summarized. Moreover, not only their advantages but also the challenges they pose in practical applications are highlighted. By shedding light on these aspects, this review aims to contribute to the continued development and utilization of COF materials in the field of sample pretreatment.

Advancements in Sample Preparation Methods for the Chromatographic and Mass Spectrometric Determination of Zearalenone and Its Metabolites in Food: An Overview

Zearalenone and its metabolites are mycotoxins generated by Fusarium species while crops are growing and can typically be found in various foods, posing a risk to human health. Governments have implemented stricter regulations concerning the permissible levels of zearalenone in food products to safeguard public health. Stricter regulations on zearalenone levels in food have been implemented. However, detecting zearalenone and its metabolites remains challenging due to sample complexity and interference. Surprisingly few reviews of sample preparation methods for zearalenone in food have appeared in the past decade. In this overview, we outline the most recent developments in the sample pre-treatment technology of zearalenone and its metabolites in food samples based on chromatography-mass spectrometry methods since 2012. This review covers some prominent technologies, such as liquid-liquid extraction-based methods, solid-phase extraction-based methods, and QuEChERS (quick, easy, cheap, effective, rugged, and safe) extraction, providing valuable insights into their advantages and limitations for potential applications. The assessment of the methods discussed, along with an overview of current challenges and prospects, will guide researchers in advancing the field and ensuring safer food quality for consumers worldwide.

Recent progress on the detection of animal-derived food stimulants using mass spectrometry-based techniques

Background

The misuse of animal-derived stimulants in food is becoming increasingly common, and mass spectrometry (MS) is used extensively for their detection and analysis. There is a growing demand for abused-substances detection, highlighting the need for systematic studies on the advantages of MS-based methods in detecting animal-derived stimulants.

Objective

We reviewed the application of chromatography-mass spectrometry to the screening and detection of food stimulants of animal origin. Specifically, we analyzed four common animal sources of synthetic steroids, β-receptor agonists, zearalenol (ZAL), and glucocorticoids. We also explored the potential of using chromatography-mass spectrometry to detect and analyze animal-derived foods.

Methods

We searched and screened the Web of Science and Google Scholar databases until April 2023. Our inclusion criteria included a publication year within the last 5 years, publication language of English, and the research fields of food analysis, environmental chemistry, and polymer science. Our keywords were "mass spectrometry," "anabolic androgenic steroids," "β-2agonists," "glucocorticoids," "zearalenone," and "doping."

Results

Although traditional techniques such as thin-layer chromatography and enzyme-linked immunoassays are simple, fast, and suitable for the initial screening of bulk products, they are limited by their relatively high detection limits. Among the methods based on MS, gas chromatography-mass spectrometry and liquid chromatography-tandem mass spectrometry are the most widely used for detecting food doping agents of animal origin. However, a sensitive method with high repeatability and a short analysis time for a large number of samples is still required. Advances in MS have enabled the detection of extremely low concentrations of these substances. Combining different techniques, such as high-resolution mass spectrometry, ultra-high performance liquid chromatography-tandem mass spectrometry, gas chromatography-combustion-isotope ratio mass spectrometry, ultra-high performance liquid chromatography-high resolution mass spectrometry, and two-dimensional chromatography, offers significant advantages for detecting trace illicit drugs in animal-derived foods. Due to advances in assay technology and sample preparation methods, sample collection and storage methods such as dried blood spots, dried urine spots, and volumetric absorptive microsampling are increasingly accepted because of their increased stability and cost-effectiveness.

Significance

MS significantly improves the efficiency of detecting doping agents of animal origin. With the continuous development of MS technology, its application in the fields of doping detection and the analysis of doping agents of animal origin is expected to become more extensive.

Construction of a Highly Selective Enrichment, Ionization, and Detection Platform Based on a Broad-Spectrum Antibody

Ambient mass spectrometry (AMS) allows direct analysis of various raw food samples with minimal or no sample pretreatment, but the trace analytes in complex food samples still have problems with limitations. In this work, we developed a platform based on coated stainless steel sheet spray mass spectrometry for fast, in situ, high-throughput, and high selectivity multiresidue analysis of fluoroquinolone drugs (FQs). The sensitivity of the platform was enhanced via coupling broad-spectrum antibodies against FQs to graphene oxide coated blade spray (CBS)-MS through a streptavidin-biotin (SA-biotin) interaction. The prepared platform had sufficient loading capacity for SA (1.37 mg/piece) and the antibody (84.8 μg/piece), which is greater than that of physical mixing and the EDC/NHS covalent coupling strategy. With simplified sample pretreatment, this platform demonstrated comparable sensitivity to high performance liquid chromatography-mass spectrometry (HPLC-MS/MS) (0.08-0.16 ng/mL in phosphate-buffered saline and 0.21-0.32 ng/mL in diluted milk). Meanwhile, compared with HPLC-MS/MS, the method is rapid (enrichment: 10 min, detection: <1 min) and acceptable recoveries (81.94-102.08%) can be obtained. The presence of analytes can be monitored by MS/MS spectra, and multiple analytes can be measured simultaneously in a single assay. This study is expected to provide a powerful and portable tool for rapid laboratory analysis and reliable screening in the field.