Stable nanoparticles prepared by heating electrostatic complexes of whey protein isolate-dextran conjugate and chondroitin sulfate

A stable delivery system for curcumin: Fabrication and characterization of self-assembling acylated kidney bean protein isolate nanogels

The construction of protein-based nano-gels as curcumin delivery system effectively enhances the stability and bioavailability of curcumin. In this study, acylation modification and self-assembly techniques were jointly employed to construct acylated kidney bean protein isolate (AKBPI)-nanogels. Optimal conditions for AKBPI-nanogels were determined to be pH 7, concentration of 2 mg/mL, and temperature at 90℃ for 30 min. The optimized AKBPI-nanogels exhibited excellent uniformity as evidenced by decreasing average particle size (137.35 nm) and polydispersity index (0.38). Acylation enhanced the intermolecular interactions within the nanogel by reducing the polarity of tyrosine microenvironment and free sulfhydryl groups. AKBPI-nanogels demonstrated remarkable characteristics in terms of pH sensitivity, salt concentration, and storage tolerance. The curcumin-loaded AKBPI-nanogels exhibited an encapsulation efficiency of 92.30 % and maintained high antioxidant activity. In simulated gastrointestinal digestion, AKBPI-nanogels facilitated the controlled release and higher bioavailability of curcumin. Therefore, AKBPI-nanogels can be a stable tool for delivering curcumin.

Preparation of Lutein Nanoparticles by Glycosylation of Saccharides and Casein for Protecting Retinal Pigment Epithelial Cells

Age-related macular degeneration (AMD), a leading cause of visual impairment in the aging population, lacks effective treatment options due to a limited understanding of its pathogenesis. Lutein, with its strong antioxidant properties and ability to mitigate AMD by absorbing ultraviolet (UV) rays, faces challenges related to its stability and bioavailability in functional foods. In this study, we aimed to develop delivery systems using protein-saccharide conjugates to enhance lutein delivery and protect adult retinal pigment epithelial (ARPE-19) cells against sodium iodate (NaIO3)-induced damage. Various saccharides, including mannose, galactose, lactose, maltose, dextran, and maltodextrin, were conjugated to casein via the Maillard reaction for lutein delivery. The resulting lutein-loaded nanoparticles exhibited small size and spherical characteristics and demonstrated improved thermal stability and antioxidant capacity compared to free lutein. Notably, these nanoparticles were found to be nontoxic, as evidenced by reduced levels of cellular reactive oxygen species production (167.50 ± 3.81, 119.57 ± 3.45, 195.15 ± 1.41, 183.96 ± 3.11, 254.21 ± 3.97, 283.56 ± 7.27%) and inhibition of the mitochondrial membrane potential decrease (58.60 ± 0.29, 65.05 ± 2.91, 38.88 ± 1.81, 42.95 ± 1.39, 23.52 ± 1.04, 25.24 ± 0.08%) caused by NaIO3, providing protection against cellular damage and death. Collectively, our findings suggest that lutein-loaded nanoparticles synthesized via the Maillard reaction hold promise for enhanced solubility, oral bioavailability, and biological efficacy in the treatment of AMD.

Enhanced Antibacterial Efficiency and Anti-Hygroscopicity of Gum Arabic-ε-Polylysine Electrostatic Complexes: Effects of Thermal Induction

The aim of this investigation was to scrutinize the effects of a thermal treatment on the electrostatic complex formed between gum arabic (GA) and ε-polylysine (ε-PL), with the goal of improving the antibacterial properties and reducing the hygroscopicity of ε-PL. The heated complex with a ratio of 1:4 exhibited an encapsulation efficiency of 93.3%. Additionally, it had an average particle size of 350.3 nm, a polydispersity index of 0.255, and a zeta potential of 18.9 mV. The formation of the electrostatic complex between GA and ε-PL was confirmed through multispectral analysis, which demonstrated the participation of hydrogen bonding and hydrophobic and electrostatic interactions, as well as the enhanced effect of heat treatment on these forces within the complex. The complex displayed a core-shell structure, with a regular distribution and a shape that was approximately spherical, as observed in the transmission electron microscopy images. Additionally, the heated GA-ε-PL electrostatic composite exhibited favorable antibacterial effects on Salmonella enterica and Listeria monocytogenes, with reduced minimum inhibitory concentrations (15.6 μg/mL and 62.5 μg/mL, respectively) and minimum bactericidal concentrations (31.3 μg/mL and 156.3 μg/mL, respectively) compared to free ε-PL or the unheated electrostatic composite. Moreover, the moisture absorption of ε-PL reduced from 92.6% to 15.0% in just 48 h after being incorporated with GA and subsequently subjected to heat. This research showed a way to improve the antibacterial efficiency and antihygroscopicity of ε-PL, reducing its application limitations as an antimicrobial substance to some extent.

Aggregation and Growth Mechanism of Ovalbumin and Sodium Carboxymethylcellulose Colloidal Particles under Thermal Induction

Ovalbumin (OVA)/sodium carboxymethylcellulose (CMC) colloidal particles were prepared with different compactness and morphologies by regulating the interaction between proteins and polysaccharides during heating. Electrostatic interactions between the amine groups of OVA (-NH₃⁺) and carboxyl groups of CMC (-COO^-) enhanced complex formation. The protein conformation change benefited the hydrophobic interaction between the particles. Proteins in colloidal particles were unfolded/folded under thermal induction to form aggregates having more β-sheet structures. When the OVA/CMC ratio was 1:2, the initially loosely connected OVA/CMC aggregation changed into a uniform sphere between 25 and 90 °C. The mass ratio of OVA to CMC within the final colloidal particle (90 °C) was about 1:1.4. The OVA/CMC particle stability was maintained with hydrogen bonding, hydrophobicity, and disulfide bond. When OVA levels were predominant, OVA and CMC developed an approximately hollow sphere. Moreover, the final colloidal particle composition showed the OVA-to-CMC ratio as 3:1 (w/w). OVA bound into colloidal particle pores to increase compactness. Moreover, OVA and CMC bound to the colloidal particle while the particle shrank, thereby increasing the compactness of colloidal particles. There was a significant decrease in ABTS^•+ scavenging activity of curcumin compared with that of the particles with a ratio of 1:2. Thus, the rational adjustment of the structure of colloidal particles could effectively enhance their functional characteristics, providing a new way for the controlled release of the active ingredients.

Utilization of ultrasound and glycation to improve functional properties and encapsulated efficiency of proteins in anthocyanins

The purpose of this study is to explore the optimal conditions for the preparation of bovine serum albumin (BSA)/casein (CA)-dextran (DEX) conjugates by ultrasonic pretreatment combined with glycation (U-G treatment). When BSA and CA were treated with ultrasound (40% amplitude, 10 min), the grafting degree increased 10.57% and 6.05%, respectively. Structural analysis revealed that ultrasonic pretreatment changed the secondary structure, further affected functional properties of proteins. After U-G treatment, the solubility and thermal stability of BSA and CA was significantly increased, and the foaming and emulsifying capacity of proteins were also changed. Moreover, ultrasonic pretreatment and glycation exhibited a greater impact on BSA characterized with highly helical structure. Complexes fabricated by U-G-BSA/CA and carboxymethyl cellulose (CMC) exhibited protection on anthocyanins (ACNs), delaying the thermal degradation of ACNs. In conclusion, the protein conjugates treated by ultrasonic pretreatment combined with glycation have excellent functionality and are potential carrier materials.

Antioxidant activity and interactions between whey protein and polysaccharides from different parts of Houttuynia cordata

Houttuynia cordata polysaccharides (PSY) are known to exhibit a variety of beneficial activities, but these are currently not specifically utilized in food. Hence, using the two edible parts of Houttuynia cordata, a herbaceous plant native to Southeast Asia, this study developed polysaccharides of a stem (HCPS)-whey protein concentrate (WPC) complex and a leaf (HCPL)-WPC complex, and studied their stability, structure and antioxidant activity. The results showed that stability differed in complexes with different proportions, exhibiting only relative stability in the two complexes in which the ratio of HCPS-WPC and HCPL-WPC was 1:4, but increased stability in the HCPL-WPC complex (ζ-potential of HCPL-WPC: | -21.87 mv| >ζ-potential of HCPS-WPC: | -21.70 mv|). Structural characterization showed that there was electrostatic interaction between HCPS and WPC and between HCPL and WPC. The HCPL-WPC was found to have better antioxidant activity. The findings of this study, thus, provide a reference for the development of Houttuynia cordata polysaccharide applications in food.

Improved Light and In Vitro Digestive Stability of Lutein-Loaded Nanoparticles Based on Soy Protein Hydrolysates via Pepsin

In order to improve the water solubility and stability of lutein, soy protein isolates (SPI) and their hydrolysates via pepsin (PSPI) and alcalase (ASPI) were used as nanocarriers for lutein to fabricate the lutein-loaded nanoparticles (LNPS) of SPI, PSPI, and ASPI. The encapsulation properties, light, and in vitro digestive stability of lutein in nanoparticles, and protein-lutein interactions were investigated. Compared with SPI-LNPS and ASPI-LNPS, PSPI-LNPS was characterized by uniform morphology (approximately 115 nm) with a lower polydispersity index (approximately 0.11) and higher lutein loading capacity (17.96 μg/mg protein). In addition, PSPI-LNPS presented the higher lutein retention rate after light exposure (85.05%) and simulated digestion (77.73%) than the unencapsulated lutein and SPI-LNPS. Fluorescence spectroscopy revealed that PSPI had stronger hydrophobic interaction with lutein than SPI, which positively correlated with their beneficial effects on the light and digestive stability of lutein. This study demonstrated that PSPI possessed significant potential for lutein delivery.

Preparation and characterization of soybean protein isolate-dextran conjugate-based nanogels

Soybean protein isolate (SPI)-dextran conjugate-based nanogels were prepared via the Maillard reaction combined with protein self-assembly in this study. The dextran molecular weight (40 kDa), SPI/dextran mass ratio (1:1.75), and incubation time (3.3 d) for preparing SPI-dextran conjugate (SDC) were firstly optimized. The SDC was confirmed by analyzing the changes in protein composition and infrared absorption bands and showed loosened tertiary conformation, reduced surface hydrophobicity, decreased Z-average hydrodynamic diameter (D_h) and zeta potential, and improved emulsifying properties compared to the native SPI. Effects of conjugate concentration, pH, heating temperature, and time on D_h and polydispersity index were also evaluated. The SDC-based nanogels were translucent in aqueous solution and exhibited a spherical core-shell structure with a D_h of ∼104.4 nm and a good stability against thermal treatment, ionic strength, and storage. Results demonstrated the SDC-based nanogels possessed a potential to be used as desirable nanocarriers for encapsulating hydrophobic bioactive compounds.

Development of Encapsulation Strategies and Composite Edible Films to Maintain Lactoferrin Bioactivity: A Review

Lactoferrin (LF) is a whey protein with various and valuable biological activities. For this reason, LF has been used as a supplement in formula milk and functional products. However, it must be considered that the properties of LF can be affected by technological treatments and gastrointestinal conditions. In this article, we have revised the literature published on the research done during the last decades on the development of various technologies, such as encapsulation or composite materials, to protect LF and avoid its degradation. Multiple compounds can be used to conduct this protective function, such as proteins, including those from milk, or polysaccharides, like alginate or chitosan. Furthermore, LF can be used as a component in complexes, nanoparticles, hydrogels and emulsions, to encapsulate, protect and deliver other bioactive compounds, such as essential oils or probiotics. Additionally, LF can be part of systems to deliver drugs or to apply certain therapies to target cells expressing LF receptors. These systems also allow improving the detection of gliomas and have also been used for treating some pathologies, such as different types of tumours. Finally, the application of LF in edible and active films can be effective against some contaminants and limit the increase of the natural microbiota present in meat, for example, becoming one of the most interesting research topics in food technology.

Preparation of ultra-long stable ovalbumin/sodium carboxymethylcellulose nanoparticle and loading properties of curcumin

OVA (ovalbumin)/CMC (sodium carboxymethylcellulose) nanoparticles are prepared by combining complex coacervation and thermal induction. The effect of different parameters on stability of OVA/CMC nanoparticles (different ratios, pH, temperature, salt concentration and storage time) is investigated. And then the loading and stabilizing mechanism of particles on curcumin are further analyzed. After heating, OVA and CMC in particle could further cross-linking and a highly salt-tolerant and ultra-long stable nanoparticle can be formed. OVA/CMC nanoparticle with the loose structure of wool ball could effectively load curcumin with the loading content and loading efficiency of 36.40 and 95.40%, 36.30 and 92.82%, 36.0 and 94.48% for the ratios of 1:2, 1:1 and 2:1, respectively. Curcumin-loaded of OVA/CMC nanoparticles show good DPPH· scavenging activity, Ferric-reducing ability and ABTS⁺ scavenging activity compared with curcumin/water. The results can be useful for designing food and beverage particle with improving bioactive substances functional properties.

Combination of copigmentation and encapsulation strategies for the synergistic stabilization of anthocyanins

Copigmentation and encapsulation are the two most commonly used techniques for anthocyanin stabilization. However, each of these techniques by itself suffers from many challenges associated with the simultaneous achievement of color intensification and high stability of anthocyanins. Integrating copigmentation and encapsulation may overcome the limitation of usage of a single technique. This review summarizes the most recent studies and their challenges aiming at combining copigmentation and encapsulation techniques. The effective approaches for encapsulating copigmented anthocyanins are described, including spray/freeze-drying, emulsification, gelation, polyelectrolyte complexation, and their combinations. Other emerging approaches, such as layer-by-layer deposition and ultrasonication, are also reviewed. The physicochemical principles underlying the combined strategies for the fabrication of various delivery systems are discussed. Particular emphasis is directed toward the synergistic effects of copigmentation and encapsulation, for example, modulating roles of copigments in the processes of gelation and complexation. Finally, some of the major challenges and opportunities for future studies are highlighted. The trend of integrating copigmentation and encapsulation has been just started to develop. The information in this review should facilitate the exploration of the combination of multistrategy and the fabrication of robust delivery systems for copigmented anthocyanins.

Mild Enzyme-Induced Gelation Method for Nanoparticle Stabilization: Effect of Transglutaminase and Laccase Cross-Linking

Low-environment-sensitive nanoparticles were prepared by enzymatic cross-linking of electrostatic complexes of dextran-grafted whey protein isolate (WPI-Dextran) and chondroitin sulfate (ChS). The effect of transglutaminase (TG) and laccase cross-linking on nanoparticle stability was investigated. Covalent TG cross-linking and grafted dextran cooperatively contributed to the stability of nanoparticles against dissociation and aggregation under various harsh environmental conditions (sharply varying pH, high ionic strength, high temperature, and their combined effects). However, fragmentation induced by laccase treatment did not promote nanoparticle stability. Structural characterization showed that the compact structure promoted by TG-induced covalent isopeptide bonds repressed dissociation against varying environmental conditions and thermal-induced aggregation. Furthermore, the increasing α-helix and decreasing random coil contents benefited the formation of disulfide bonds, further contributing to the enhanced stability of nanoparticles cross-linked by TG, whereas weak hydrophobic interactions and hydrogen bonding as evidenced by the increase in β-sheet and microenvironmental changes were not able to maintain the stability of nanoparticles treated with laccase. Encapsulated cinnamaldehyde presented sustained release from TG-cross-linked nanoparticles, and the bioaccessibility was considerably enhanced to 50.7%. This research developed a novel mild strategy to enhance nanoparticle stability in harsh environments and digestive conditions, which could be an effective delivery vehicle for hydrophobic nutrients and drug applications in food and pharmaceutical industries.

Molecular Properties of Flammulina velutipes Polysaccharide-Whey Protein Isolate (WPI) Complexes via Noncovalent Interactions

Whey protein isolate (WPI) has a variety of nutritional benefits. The stability of WPI beverages has attracted a large amount of attention. In this study, Flammulina velutipes polysaccharides (FVPs) interacted with WPI to improve the stability via noncovalent interactions. Multiple light scattering studies showed that FVPs can improve the stability of WPI solutions, with results of radical scavenging activity assays demonstrating that the solutions of the complex had antioxidant activity. The addition of FVPs significantly altered the secondary structures of WPI, including its α-helix and random coil. The results of bio-layer interferometry (BLI) analysis indicated that FVPs interacted with the WPI, and the equilibrium dissociation constant (K_D) was calculated as 1.736 × 10^-4 M in this study. The in vitro digestibility studies showed that the FVPs protected WPI from pepsin digestion, increasing the satiety. Therefore, FVPs effectively interact with WPI through noncovalent interactions and improve the stability of WPI, with this method expected to be used in protein-enriched and functional beverages.

Different Strategies for the Preparation of Galactose-Functionalized Thermo-Responsive Nanogels with Potential as Smart Drug Delivery Systems

Different synthetic strategies were tested for the incorporation of galactose molecules on thermoresponsive nanogels owing to their affinity for receptors expressed in cancer cells. Three families of galactose-functionalized poly(N-vinylcaprolactam) nanogels were prepared with the aim to control the introduction of galactose-moieties into the core, the core-shell interface and the shell. First and second of the above mentioned, were prepared via surfactant free emulsion polymerization (SFEP) by a free-radical mechanism and the third one, via SFEP/reversible addition-fragmentation chain transfer (RAFT) polymerization. Synthetic recipes for the SFEP/free radical method included besides N-vinylcaprolactam (NVCL), a shell forming poly(ethylene glycol) methyl ether methacrylate (PEGMA), while the galactose (GAL) moiety was introduced via 6-O-acryloyl-1,2,:3,4-bis-O-(1-methyl-ethylidene)-α-D-galactopiranose (6-ABG, protected GAL-monomer): nanogels I, or 2-lactobionamidoethyl methacrylate (LAMA, GAL-monomer): nanogels II. For the SFEP/RAFT methodology poly(2-lactobionamidoethyl methacrylate) as GAL macro-chain transfer agent (PLAMA macro-CTA) was first prepared and on a following stage, the macro-CTA was copolymerized with PEGMA and NVCL, nanogels III. The crosslinker ethylene glycol dimethacrylate (EGDMA) was added in both methodologies for the polymer network construction. Nanogel's sizes obtained resulted between 90 and 370 nm. With higher content of PLAMA macro-CTA or GAL monomer in nanogels, a higher the phase-transition temperature (TVPT) was observed with values ranging from 28 to 46 °C. The ρ-parameter, calculated by the ratio of gyration and hydrodynamic radii from static (SLS) and dynamic (DLS) light scattering measurements, and transmission electron microscopy (TEM) micrographs suggest that core-shell nanogels of flexible chains were obtained; in either spherical (nanogels II and III) or hyperbranched (nanogels I) form.

BSA nanoparticles as controlled release carriers for isophethalaldoxime palladacycle complex; synthesis, characterization, in vitro evaluation, cytotoxicity and release kinetics analysis

BSA nanoparticles were synthesized as a biodegradable carrier by the desolvation method.

Self-assembled composite nanoparticles based on zein as delivery vehicles of curcumin: role of chondroitin sulfate

Composite nanoparticles composed of zein and chondroitin sulfate (CS) were self-assembled by the method of antisolvent precipitation to deliver curcumin (ZCCNPs).

Enhanced Chemical Stability, Intestinal Absorption, and Intracellular Antioxidant Activity of Cyanidin-3-O-glucoside by Composite Nanogel Encapsulation

A composite nanogel was developed for cyanidin-3-O-glucoside (C3G) delivery by combining Maillard reaction and heat gelation. The starting materials utilized were ovalbumin, dextran, and pectin. C3G-loaded nanogel was spherical with a diameter of ∼185 nm, which was maintained over a wide range of pH and NaCl concentrations. The composite nanogel enhanced the chemical stability of C3G under accelerated degradation models and a simulated gastrointestinal tract. Clathrin-mediated, caveolae-mediated, and macropinocytosis-related endocytosis contributed to the higher cellular uptake of nano-C3G than that of free-C3G. The apparent permeability coefficients of C3G increased 2.16 times after nanoencapsulation. The transcytosis of the C3G-bearing nanogel occurred primarily through the clathrin-related pathway and macropinocytosis and followed the "common recycling endosomes-endoplasmic reticulum-Golgi complex-basolateral plasma membrane" route. Moreover, nano-C3G was more efficient in restoring the viability of cells and activities of endogenous antioxidant enzymes than free-C3G in oxidative models, which may be attributed to the former's high cellular absorption.

Preparation and characterization of redox-sensitive glutenin nanoparticles

In recent thirty years, protein-based nanoparticles have attracted considerable attention, and they are being widely used in the food, pharmaceutical, and biomedical fields. Wheat glutenin, an important natural vegetable protein, has been demonstrated to be nutritive and biocompatible. This study aimed to develop a new type of redox-sensitive protein nanoparticles. The glutenin nanoparticles (GNPs) were synthesized with glutenin concentrations (0.082%, 0.5%, and 0.83%) through the adoption of an antisolvent titration technique and the use of hydrogen peroxide (H₂O₂) oxidative cross-linking for different periods. At a glutenin concentration of 0.83% and oxidation time of 20 h, the obtained GNPs were spherical in shape and approximately 100-300 nm in size, as measured by transmission electron microscopy and dynamic light scattering. The formation of disulfide was confirmed by Raman spectroscopy. The turbidity values of the GNP suspensions were decreased by half after the addition of β-mercaptoethanol. Nile blue A, a model hydrophilic substance, was entrapped in the GNPs with 77.67% loading efficiency. The newly developed GNPs can be used as redox-responsive carriers for delivering hydrophilic active substances.

Effects of pectin polydispersity on zein/pectin composite nanoparticles (ZAPs) as high internal-phase Pickering emulsion stabilizers

In the present study, the properties of two apple sourced-pectin (AP-1 and AP-2) were comparative studied, and their influence on the formation of high internal-phase Pickering emulsions (HIPPEs) was investigated. Results showed that AP-2 has lower polydispersity index (PDI = 2.51) than AP-1. Zein/AP-2 complex nanoparticles (ZAPs-2) was able to stabilize 80% oil-phase to form HIPPEs, while ZAPs-1 failed to remain stable at same oil fraction. After correlating GPC (Gel Permeation Chromatography) results of pectins with their emulsion behavior, pectin PDI was found to play an important role in HIPPEs formation. Storage experiments and rheological properties analysis showed that HIPPEs exerted excellent stability and plasticity. Besides, super-resolution microscopy (including cryo-SEM and STED nanoscopy) depicted an intuitive interface structure of HIPPEs. These findings may contribute some basis to manipulating emulsion performance by adjusting pectin properties, as well as to further understanding the behavior of ZAPs at O/W interface.

Design, fabrication and characterization of pectin-coated gelatin nanoparticles as potential nano-carrier system

The main purpose of this study was to fabricate potential nano-delivery systems based on protein-polysaccharide complex for use in beverages. In this regard, optimum gelatin-pectin complex (GPC) nano-carrier with hydrodynamic diameter of ≈200 nm was designed and fabricated using low-bloom gelatin (BG) and high-methoxyl pectin (CP) at BG/CP weight ratio of 1:1 (0.025%(w/v) CP on 0.025%(w/v) BG) and pH 4.5. The suspension containing GPC nano-carrier had very good transparency (14.1NTU). Scanning electron microscopy (SEM) images illustrated that the GPC particles were spherical with fairly smooth surface. Particle size analysis showed that the complex particles had a narrow size distribution (polydispersity index (PDI)≈0.254). Fourier transform infrared (FTIR) confirmed the formation of amide bonds between carboxyl groups in CP and amino groups in BG, and differential scanning calorimetry (DSC) analysis showed the amorphous nature of the GPC nano-carrier. Finally, the storage stability test indicated that the GPC particles didn't significantly grow after 20 days of storage at 4°C. PRACTICAL APPLICATION: The encapsulation of bioactive compounds have different benefits, for example, protection from several damaging environmental factors such as light, oxygen, moisture, heat, mechanical stresses, or other destructive agents, controlling the release of bioactives within foods during storage and also in human gastrointestinal tract, increase in solubility in aqueous foods and covering unfavorable flavor and odor of bioactive ingredients. So that, development of this technic can develops new functional, healthy foods, and foods with new tastes.

Fabrication and characterization of complex nanoparticles based on carboxymethyl short chain amylose and chitosan by ionic gelation

The combination of carboxymethyl short chain amylose with chitosan could be considered as a candidate for oral delivery of insulin.

Development of chitosan-sodium phytate nanoparticles as a potent antibacterial agent

Chitosan nanoparticles have attracted considerable attention as a potential carrier for food and pharmaceutical applications. Herein, using natural sodium phytate as a gelation agent, we developed a new type of green and biocompatible chitosan nanoparticles. We discovered that the chitosan-sodium phytate nanoparticles exhibited potent antibacterial activities. The chitosan-sodium phytate nanoparticles prepared from low molecular weight (LMW, 140±7kDa) and medium molecular weight (MMW, 454±21kDa) chitosan were spherical. Under optimum conditions-with a ratio of LMW chitosan to sodium phytate of 24:1 and MMW chitosan to sodium phytate of 21:1-the sizes of the LMW and MMW chitosan nanoparticles were 20-80 and 80-100nm, respectively, as observed by transmission electron microscopy. The formation mechanism of chitosan nanoparticles occurred through both electrostatic interactions and hydrogen bonds. No cytotoxicity for normal liver cells was found in chitosan-sodium phytate nanoparticles measured by methyl thiazolyl tetrazolium assay. Furthermore, the antimicrobial assays indicated that the antimicrobial activity of the LMW chitosan nanoparticles was greater than that of MMW chitosan nanoparticles. The minimum inhibition concentration values and half inhibiting concentration of LMW chitosan-sodium phytate nanoparticles for Escherichia coli were 1.5 and 0.8mg/mL, respectively. In addition, the antimicrobial activity of chitosan nanoparticles against Gram-negative bacteria was better than that against Gram-positive bacteria. The newly developed chitosan-sodium phytate nanoparticles could be used as a potential antibacterial agent.