Method Development and Validation of Indaziflam and Its Five Metabolites in Soil, Water, and Fruits by Modified QuEChERS and UHPLC-MS/MS

Simultaneous determination of 27 pesticides in corn and cow matrices by ultra-performance liquid chromatography-tandem mass spectrometry

In this paper, we developed a sensitive UPLC-MS/MS method to determine pesticide residues in plant matrices (corn, fresh corn, fresh corn stover, old corn stover, and corn silage) and animal matrices (beef, fat, milk, milk fat, kidney, liver, and cow stomach) quantitatively. Twenty-seven pesticides were extracted with acetonitrile from all plant and animal matrices separately and purified with a mixture of primary secondary amine (PSA) and graphitized carbon black (GCB) or octadecylsilane (C18). The average recoveries of these compounds ranged from 60.7% to 118.2%, and the relative standard deviations were less than 20.0%. The limit of quantitation for all compounds was 0.01 mg kg-1 (for cyhalothrin and beta cypermethrin the LOQ was 0.02 mg kg-1). The establishment of multi-residue analysis methods for a variety of matrices can be used as a database for future method research. The results of this study are essential for calculating the transfer of pesticide residues from feed to animal products and for monitoring food safety, which will protect people's health and safety.

Research progress of applications for nano-materials in improved QuEChERS method

The quick, easy, cheap, effective, rugged, and safe (QuEChERS) approach is widely used in sample pretreatment in agricultural products, food, environment, etc. And nano-materials are widely used in QuEChERS method due to its small size and large specific surface area. In this review, we examine the typical applications of several commonly used nano-materials in improved QuEChERS method. These materials include multi-walled carbon nanotubes (MWCNTs) and their derivatives, magnetic nanoparticles (MNPs), metal organic frameworks (MOFs), covalent organic frameworks (COFs), graphene oxide (GO), lipid and protein adsorbent (LPAS), cucurbituril (CBs), and carbon nano-cages (CNCs), and so on. The strengths and weaknesses of each nano-material are presented, as well as the challenging aspects that need to be addressed in future research. By comparing the applications and the current technology development, this review suggests utilizing artificial intelligence (AI) to screen suitable combinations of purification agents and performing virtual simulation experiments to verify the reliability of this methodology. By doing so, we aim to accelerate the development of new products and decrease the cost of innovation. It also recommends designing smarter pretreatment instruments to enhance the convenience and automation of the sample pretreatment process and reduce the margin for human error.

Development of a Modified QuEChERS Method Based on Magnetic Multi-Walled Carbon Nanotubes as a Clean-Up Adsorbent for the Analysis of Heterocyclic Aromatic Amines in Braised Sauce Beef

Heterocyclic aromatic amines (HAAs) generated during the cooking of meats cause adverse effects on human health. The purpose of the current research was to develop a modified QuEChERS (Quick, Easy, Cheap, Effective, Rugged, Safe) method using magnetic multi-walled carbon nanotubes (Fe3O4-MWCNTs) as clean-up adsorbents for the rapid determination of HAAs in braised sauce beef. The significant parameters in extraction and clean-up processes were screened and optimized. Under optimal conditions, the LODs ranged from 3.0 ng/g to 4.2 ng/g. The recoveries (78.5−103.2%) and relative standard deviations RSDs (<4.6%) of five HAAs were obtained. These are in accordance with the validation criteria (recovery in the range of 70−120% with RSD less than 20%). Compared with conventional clean-up adsorbents (PSA or C18), Fe3O4-MWCNTs displayed equivalent or better matrix removal efficiency, while making the pretreatment process easier and more time-saving through magnetic separation. Less usage of adsorbent makes the method possess another advantage of being lower in cost per sample. The method developed was successfully applied to analyze real samples collected from local deli counters, demonstrating Fe3O4-MWCNTs could be considered as an effective alternative adsorbent with great potential in the QuEChERS process.

Simultaneous determination of succinate-dehydrogenase-inhibitor fungicide traces in cereals by QuEChERS preparation and UPLC-MS/MS analysis

A method for the simultaneous determination of 19 succinate dehydrogenase inhibitor (SDHI) fungicide residues in 8 kinds of cereals was established by combining UHPLC-MS/MS with the improved QuEChERS method. MgSO₄ and octadecylsilane (C₁₈) were used as the dispersive-solid phase extraction sorbent. The proposed method had good linearity in the range of 10-100 µg/L with correlation coefficients (R² > 0.99). The limit of quantification of 19 fungicides was 10 µg/L, which is the minimum addition level of the method. The fortified recoveries of 19 SDHI fungicides at three levels were ranged from 79.57 % to 126.25 %. The developed method was utilized for the analysis of 45 real cereal samples, only 5 samples were detected with SDHI fungicides. The contents of the fungicides detected in the real samples are far lower than the MRL. The results indicated that the proposed method is reliable for detecting SDHI fungicides in cereals.

Method Development and Validation of Seven Pyrethroid Insecticides in Tea and Vegetable by Modified QuEChERS and HPLC-MS/MS

This study developed a quick, easy, cheap, effective, rugged, and safe (QuEChERS) procedure for determining seven pyrethroid pesticide residues in tea, cucumber, and tomato via high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The overall average recoveries of the seven pyrethroids were 72%-104% (relative standard deviation (RSD); 2.0%-16.1%, 89%-109% (RSD; 0.7%-17.3%), 82%-110% (RSD; 1.6%-17.1%) for tea, cucumber and tomato, respectively. The determination coefficient (R²), the limit of detection (LOD), and the limit of quantification (LOQ) were ≥ 0.99, 0.007-1.875 μg kg^-1, and 0.025-6.250 μg kg^-1, respectively. The method was successfully used to monitor the pyrethroid pesticide residues in market samples. HPLC-MS/MS rapidly, sensitively, and accurately determined the pyrethroid pesticide residues.

Health risks to dietary neonicotinoids are low for Chinese residents based on an analysis of 13 daily-consumed foods

Neonicotinoid pesticide residues are ubiquitous in various foodstuffs and may adversely affect human health. We performed a nationwide survey of neonicotinoid residues in foodstuffs collected from Chinese markets and evaluated the risks of chronic and acute exposure in 1-6-year-old children and the general population. Among the 3406 samples of 13 commodities, 62.21% contained neonicotinoids with concentrations ranging from 0.1 to 1471.43 μg/kg, and 37.58% were simultaneously contaminated with 2-7 neonicotinoids. Acetamiprid, thiamethoxam, and imidacloprid were the top three detected neonicotinoids (22.14-34.32% of samples). Chronic and acute cumulative risk assessment using the relative potency factor method revealed that exposure to neonicotinoids was within established safety limits (below 1); however, the acute risk was much greater than the chronic risk (chronic hazard index range, 1.40 × 10^-6-2.33 × 10^-3; acute hazard index range, 1.75 × 10^-6-0.15). A relatively greater acute cumulative risk was found for children with respect to consumption of grapes, mandarins, and cowpeas (acute hazard index range, 0.11-0.15). Despite the low health risk, the potential health hazards of neonicotinoids should be continuously assessed, given their ubiquity and cumulative effects.

Fe3O4 nanoparticles as matrix solid-phase dispersion extraction adsorbents for the analysis of thirty pesticides in vegetables by ultrahigh-performance liquid chromatography-tandem mass spectrometry

Herein we report the first example of Fe₃O₄ nanoparticles (FNPs) being used as single-matrix solid-phase dispersion (MSPD) adsorbents for the extraction of 30 representative pesticides from vegetables. This study was aimed at analyzing the extracted samples using ultrahigh-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS). Various condition parameters, such as the eluent, volume of the eluent, and amount of FNPs were optimized to achieve good sensitivity and precision for the elution and extraction of the analytes. The developed method was validated using matrices consisting of eight vegetables (lettuce, cucumber, carrot, tomato, pepper, shallot, Chinese flowering cabbage, and cabbage) spiked with 30 pesticides at concentrations of 0.01, 0.1, and 1.0 mg/kg. The recoveries of the 30 pesticides (organophosphorus, triazole, carbamate, nicotine, amide, and other different structures of pesticides) were in the range 71.0-110.8% (n = 5) (except those of prothioconazole and dinotefuran), with relative standard deviations lower than 13.5% in all the matrices under optimal conditions. The matrix effects were observed by comparing the slope of the matrix-matched standard calibration curve with that of the solvent. However, the matrix effects of the eight vegetables did not show evident regularities. For pepper, tomato, and shallot, a sizable number of pesticides (24, 21, and 21, respectively) showed suppressive matrix effects. On the other hand, for cucumber, Chinese flowering cabbage, and cabbage, a good number of pesticides (19, 18, and 15, respectively) showed negligible matrix effects. Furthermore, for carrot matrices, 21 pesticides showed a matrix enhancement effect. Excellent linearity was achieved at pesticide concentrations of 0.01-1.0 mg/L, and the limits of quantification (LOQ) for the developed method reached 0.01 mg/kg (except that for dinotefuran, which was 0.1 mg/kg), based on the spiked test. The developed method was successfully employed in the analysis of real samples in Nanning, China, and three pesticide residues (halosulfuron methyl, tebuconazole, and azoxystrobin) were commonly detected in vegetable samples. In the present study, a reliable method-validation performance and excellent cleanup effects were observed by using the modified MSPD method consisting of the FNPs in the cleanup step.

Simultaneous determination of spirodiclofen, spiromesifen, and spirotetramat and their relevant metabolites in edible fungi using ultra-performance liquid chromatography/tandem mass spectrometry

A fast, sensitive, and reliable analytical method was developed and validated for simultaneous identification and quantification of spirodiclofen, spiromesifen, and spirotetramat and their relevant metabolites in edible fungi by ultra-performance liquid chromatography/tandem mass spectrometry (UHPLC–MS/MS). First, sample extraction was done with acetonitrile containing 1% formic acid followed by phase separation with the addition of MgSO₄:NaOAc. Then, the supernatant was purified by primary secondary amine (PSA), octadecylsilane (C18), and graphitized carbon black (GCB). The linearities of the calibrations for all analytes were excellent (R² ≥ 0.9953). Acceptable recoveries (74.5–106.4%) for all analytes were obtained with good intra- and inter- relative standard deviations of less than 14.5%. The limit of quantification (LOQs) for all analytes was 10 μg kg⁻¹. For accurate quantification, matrix-matched calibration curve was applied to normalize the matrix effect. The results indicated that the method was suitable for detecting the three acaricides and their relevant metabolites in edible fungi.

Method development and validation of ten pyrethroid insecticides in edible mushrooms by Modified QuEChERS and gas chromatography-tandem mass spectrometry

A method for simultaneous determination of ten pyrethroid insecticides residues in edible mushrooms was developed. The samples were pretreated by a quick, easy, cheap, effective, rugged (QuEChERS) method. The ten pyrethroid insecticides were extracted from six kinds of edible mushrooms using acetonitrile and subsequently cleaned up by octadecylsilane (C18) or primary secondary amine (PSA). Instrumental analysis was completed in 16 min using gas chromatography-tandem mass spectrometry (GC-MS/MS). The overall average recoveries in the six kinds of edible mushrooms at three levels (10, 100 and 1000 μg kg^-1) ranged from 72.8% to 103.6%. The intraday and interday relative standard deviations (RSD) were lower than 13.0%. The quantification limits were below 5.57 μg kg^-1 in different matrices. The results demonstrated that the method is convenient for the quick detection of pyrethroid insecticides in edible mushrooms.

High Throughput Residue Analysis of Indaziflam and its Metabolites in Palm Oil Using Liquid Chromatography–Tandem Mass Spectrometry

Background

Indaziflam (IND) is a herbicide that is used in palm oil plantations for broad spectrum management of weeds. Until now, no validated method has been available for residue estimation of this herbicide in palm oil products.

Objective

In this study, we report a rapid method for the residue analysis of IND and its metabolites, viz., IND-carboxylic acid, diaminotriazine, and triazine indanone in a wide range of palm oil matrices using liquid chromatography–tandem mass spectrometry (LC-MS/MS).

Method

The optimized sample preparation workflows included two options: (1) acetonitrile extraction (QuEChERS workflow), followed by freezing at −80°C and (2) acetonitrile extraction, followed by cleanup through a C18 solid phase extraction (SPE) cartridge. The optimized LC runtime was 7 min. All these analytes were estimated by LC-MS/MS multiple reaction monitoring.

Results

Both sample preparation methods provided similar method performance and acceptable results. The limit of quantification (LOQ) of IND, IND-carboxylic acid, and triazine indanone was 0.001 mg/kg. For diaminotriazine, the LOQ was 0.005 mg/kg. The method accuracy and precision complied with the SANTE/12682/2019 guidelines of analytical quality control.

Conclusions

The potentiality of the method lies in a high throughput analysis of IND and its metabolites in a single chromatographic run with high selectivity and sensitivity. Considering its fit-for-purpose performance, the method can be implemented in regulatory testing of IND residues in a wide range of palm oil matrices that are consumed and traded worldwide.

Highlights

This work has provided a validated method for simultaneous residue analysis of indaziflam and its metabolites in crude palm oil and its derived matrices with high sensitivity, selectivity, and throughput.

Simultaneous analysis of indaziflam and its metabolites in pitaya using dispersive solid phase extraction coupled with liquid chromatography coupled with tandem mass spectrometry

A simple and efficient multiresidue method using dispersive solid phase extraction and liquid chromatography coupled with tandem mass spectrometry was developed for the targeted analysis of indaziflam and its five metabolites (indaziflam-diaminotriazine, indaziflam-carboxylic acid, indaziflam-triazine indanone, indaziflam-hydroxyethyl, and indaziflam-olefin) in pitaya samples (including roots, plants, flowers, peels, pulp, and whole fruit). The analytes were extracted with acetonitrile, and the extracts were purified using multiwalled carbon nanotubes. The method was validated using pitaya samples spiked at 0.5, 5, and 50 µg/kg, and the average recoveries varied from 61.1 to 103.7% with relative standard deviations lower than 12.7% (n = 5). This method exhibited sufficient linearity within the concentration range of 0.1-100 µg/L. The limits of detection and quantification were in the ranges of 0.001-0.1 and 0.003-0.3 µg/kg, respectively. The method was successfully applied to analyze pitaya samples in Nanning, and no indaziflam or its metabolites were detected in the samples analyzed.

An efficient method to simultaneously analyze multi-class organic pollutants in human serum

The degree of population exposure to various organic pollutants (OPs), including polycyclic aromatic hydrocarbons, organochlorinated pesticides, polychlorinated biphenyls, and polybrominated diphenyl ethers, can be determined by measuring their concentrations in human serum. However, performing large-scale measurements with such a variety of compounds in serum is challenging in terms of efficiency and cost. We describe herein the development of a high-efficiency extraction and sample cleanup protocol for simultaneous and quantitative analyses of OPs using gas chromatography-mass spectrometry. OPs, together with crude lipid impurities, were extracted from human serum with a mixture of n-hexane and methyl tert-butyl ether. A disperse sorbent composed of primary secondary amine and C18 (PSA/C18) was used to roughly remove co-extracted impurities. A combined column of neutral silica gel and neutral alumina oxide (AlO/SiG) was then used for deep cleanup. For the removal of impurities, the overall performance of our protocol for the analysis of OPs in serum was comparable to that of traditional gel permeation chromatography (GPC) and dramatically better than that of PSA/C18, which is a frequently used QuEChERS (quick, easy, cheap, effective, rugged, safe) based method. While both the proposed protocol and GPC yielded recoveries of 80%-110% for four classes of OPs, our protocol consumed about 10 times less solvent, resulting in lower experimental expenses and a lower risk of contamination from residual OPs in the solvent and other supplies. In contrast to GPC, our protocol also permits efficient batch processing of serum samples, allowing for large sample sizes such as those encountered in epidemiological studies.

One-step sample processing method for the determination of perchlorate in human urine, whole blood and breast milk using liquid chromatography tandem mass spectrometry

A one-step sample processing was developed to determine the levels of perchlorate in human urine, whole blood and breast milk by using liquid chromatography tandem mass spectrometry (LC-MS/MS). Athena C18-WP column was used to separate and analyze perchlorate. Perchlorate and isotope-labeled perchlorate (Cl¹⁸O₄^-) internal standards were spiked in the sample matrix through vortex mixing, centrifugation, and filtration. The filtrate was collected and subjected to LC analysis. The developed method was validated for its reproducibility, linearity, trueness, and recovery. Satisfactory recovery of perchlorate ranged from 81% to 117% with intraday relative standard deviations (RSDs) (n = 3) and inter-day RSDs (n = 9) of 5-18% and of 5-16%, respectively. Good linearity (R² ≥ 0.99) was observed. Limits of detection and quantification for perchlorate ranged from 0.06 µg/L to 0.3 µg/L and from 0.2 µg/L to 1 µg/L, respectively. Perchlorate concentrations were found in human urine (n = 38) and whole blood (n = 8) samples with the range of 6.5-288.6 µg/L and 0.3-2.8 µg/L, respectively. These results indicate the applicability of our developed method in determining perchlorate level in real samples. Moreover, this method is also highly reliable, sensitive and selective in detecting perchlorate in human urine, whole blood and breast milk samples and may be applicable to other matrixes i.e. saliva, serum, plasma, milk powder and dairy milk.

QuEChERS - Fundamentals, relevant improvements, applications and future trends

The Quick, Easy, Cheap, Effective, Rugged and Safe (QuEChERS) method is a simple and straightforward extraction technique involving an initial partitioning followed by an extract clean-up using dispersive solid-phase extraction (d-SPE). Originally, the QuEChERS approach was developed for recovering pesticide residues from fruits and vegetables, but rapidly gained popularity in the comprehensive isolation of analytes from different matrices. According to PubMed, since its development in 2003 up to November 2018, about 1360 papers have been published reporting QuEChERS as extraction method. Several papers have reported different improvements and modifications to the original QuEChERS protocol to ensure more efficient extractions of pH-dependent analytes and to minimize the degradation of labile analytes. This analytical approach shows several advantages over traditional extraction techniques, requiring low sample and solvent volumes, as well as less time for sample preparation. Furthermore, most of the published studies show that the QuEChERS protocol provides higher recovery rate and a better analytical performance than conventional extraction procedures. This review proposes an updated overview of the most recent developments and applications of QuEChERS beyond its original application to pesticides, mycotoxins, veterinary drugs and pharmaceuticals, forensic analysis, drugs of abuse and environmental contaminants. Their pros and cons will be discussed, considering the factors influencing the extraction efficiency. Whenever possible, the performance of the QuEChERS is compared to other extraction approaches. In addition to the evolution of this technique, changes and improvements to the original method are discussed.