Synthesis of CF3-Containing Spirocyclic Indolines via a Red-Light-Mediated Trifluoromethylation/Dearomatization Cascade

Visible-Light-Mediated Rose Bengal- or [Ru(bpy)3]2+-Catalyzed Radical [4 + 2] Cycloaddition: An Efficient Route to Tetrahydrocarbazoles

A visible-light-induced Rose Bengal- or [Ru(bpy)3]2+-catalyzed radical [4 + 2] cycloaddition of redox-active indole N-hydroxyphthalimide esters with electron-deficient alkenes has been developed. This base-free protocol provides a facile and powerful route for the synthesis of functionalized and biologically significant tetrahydrocarbazoles under mild conditions. On one hand, when an organic photocatalyst-Rose Bengal was employed under green light, the desired tetrahydrocarbazoles were obtained in up to 82% yield. On the other hand, the reaction yield increased to up to 93% in the presence of [Ru(bpy)3Cl2]·6H2O under blue light. The success of the gram-scale and transformation experiments, as well as the photopromoted radical [5 + 2] cycloaddition further highlight the practicality and robustness of this protocol. Mechanistic studies also support the generation of a crucial alkyl radical intermediate.

Exploring the Synthesis and Properties of Fluorinated Cationic Triangulenes and Their Precursors

Fluorination of tris(2,6-dimethoxyphenyl)-methylium ((DMP)3C+) was achieved through the partial defluorination of the methyl 2,3,5,6-tetrafluorobenzoate via nucleophilic aromatic substitution. Using the fluorinated 2F((DMP)3C+) as a precursor, fluorinated tetramethoxy- and dimethoxyquin- acridinium salts (2F4 and 2F5 respectively) and trioxo-, azadioxo-, and diazaoxo- triangulenium salts (2F6, 2F7 and 2F8 respectively) were synthesized successfully in good to moderate yields. Fluorination induced significant red shifts in absorption (16 to 29 nm) and emission (13 to 41 nm) maxima, and increased electrophilicity as evidenced by lower reduction potentials. X-ray structural analysis showed distinct packing patterns compared to the non-fluorinated analogues, indicating the presence of molecular dipoles.

Isolated Neutral Organic Radical Unveiled Solvent-Radical Interaction in Highly Reducing Photocatalysis

Diffusion-limited kinetics is a key mechanistic debate when consecutive photoelectron transfer (conPET) is discussed in photoredox catalysis. In situ generated organic photoactive radicals can access catalytic systems as reducing as alkaline metals that can activate remarkably stable bonds. However, in many cases, the extremely short-lived transient nature of these doublet state open-shell species has led to debatable mechanistic studies, hindering adoption and development. Herein, we document the use of an isolated and stable neutral organic nPrDMQA radical as a highly photoreducing species. The isolated radical offers a unique platform to investigate the mechanism behind the photocatalytic activity of organic photocatalyst radicals. The involvement of reduced solvent is observed, formed by single electron transfer (SET) between the short-lived excited state nPrDMQA radical and the solvent. In our detailed mechanistic studies, spectroscopic and chemical affirmation of solvent reduction is strongly evident. Reduction of aryl halides, including difluoroarenes is presented as a model study of the conPET method. Further, the activation of N2O, a greenhouse gas that is yet to be activated by photoredox catalysis, is showcased in the absence of a transition metal.

Red-Light-Active N,C,N-Pincer Bismuthinidene: Excited State Dynamics and Mechanism of Oxidative Addition into Aryl Iodides

Despite the progress made in the field of synthetic organic photocatalysis over the past decade, the use of higher wavelengths, especially those in the deep-red portion of the electromagnetic spectrum, remains comparatively rare. We have previously disclosed that a well-defined N,C,N-pincer bismuthinidene (1a) can undergo formal oxidative addition into a wide range of aryl electrophiles upon absorption of low-energy red light. In this study, we map out the photophysical dynamics of 1a and glean insights into the nature of the excited state responsible for the activation of aryl electrophiles. Transient absorption and emission techniques reveal that, upon irradiation with red light, the complex undergoes a direct S0 → S1 metal-to-ligand charge transfer (MLCT) transition, followed by rapid intersystem crossing (ISC) to a highly reducing emissive triplet state (-2.61 V vs Fc+/0 in MeCN). The low dissipative losses incurred during ISC (∼6% of the incident light energy) help rationalize the ability of the bismuthinidene to convert low-energy light into useful chemical energy. Spectroelectrochemical and computational data support a charge-separated excited-state structure with radical-anion character on the ligand and radical-cation character on bismuth. Kinetic studies and competition experiments afford insights into the mechanism of oxidative addition into aryl iodides; concerted and inner-sphere processes from the triplet excited state are ruled out, with the data strongly supporting a pathway that proceeds via outer-sphere dissociative electron transfer.

Red-light mediated formylation of indoles using a helical carbenium ion as a photoredox catalyst

Low-energy photoredox catalysis has gained significant attention in developing organic transformations due to its ability to achieve high penetration depth and minimum health risks. Herein, we disclose a red-light (λ = 640 nm)-mediated C-3 formylation of indoles utilizing a helical carbenium ion as a photocatalyst and 2,2-dimethoxy-N,N-dimethylethanamine as a formylating source. These protocols exhibit a broad substrate scope under mild conditions with efficient scalability for the synthesis of C-3 formylated indoles.

Low-energy photoredox catalysis

With the advent of photoredox catalysis, new synthetic paradigms have been established with many novel transformations being achieved. Nevertheless, modern photoredox chemistry has several drawbacks, namely, deficiencies in reaction efficiency and scalability. Furthermore, wavelengths of light in excess of the energy required for a chemical reaction are often used. In this Review, we document recent developments of low-energy light-absorbing catalysts and their cognate photochemical methods, advantageously mitigating off-cycle photochemical reactivity of excited-state species in the reaction mixture and improving batch scalability of photochemical reactions. Finally, developments in red-light photoredox catalysis are leading the next-generation applications to polymer science and biochemistry-chemical biology, enabling catalytic reactions within media composites - including mammalian tissue - that are historically recalcitrant with blue-light photoredox catalysis.

Visible-Light-Induced Dearomative Annulation of Indoles toward Stereoselective Formation of Fused- and Spiro Indolines

Dearomatization approaches are attractive for their abilities to transform simple, planar arenes into complex, three-dimensional architectures. In particular, visible-light driven dearomatization strategies are significant because of their mild, green, and sustainable nature, enabling the fabrication of new chemical bonds via an electron transfer or energy transfer process. Indole compounds, being potentially bioactive and readily accessible, can be employed efficiently as building blocks for constructing diverse annulated frameworks under photocatalysis. Highly stereoselective radical cascade reactions of appropriate indole systems can provide complex cyclic scaffolds bearing multiple stereocenters. In fact, the past few years have witnessed the renaissance of dearomative cycloadditions of indoles via visible-light-induced photocatalysis. The present review highlights recent advances (2019-mid 2024) in visible-light-driven dearomative annulation of indoles leading to formation of polycyclic indolines, including angularly fused and spiro indolines. Most of the reactions described in this review are simple, providing quick access to the desired products. Additionally, characteristic reaction mechanisms are offered to provide an understand of how indole scaffolds show distinctive reactivity under photocatalytic conditions.

Red-Light-Promoted Radical Cascade Reaction to Access Tetralins and Dialins Enabled by Zinc(II)porphyrin, A Light-Flexible Catalyst

[5,15-Bis(pentafluorophenyl)-10,20-diphenylporphinato]zinc(II) (1), a metalloporphyrin derivative that was recently reported as an efficient photocatalyst driven by blue LEDs by our group, was found to catalyze a red-light-promoted (630 nm LEDs) radical cascade reaction of N-3-arylpropionyloxyphthalimides with radicophiles including electron-deficient alkenes and alkynes, providing access to a range of functionalized tetralin and dialin derivatives. The radical cascade reaction catalyzed by 1 took place via an oxidative quenching cycle in DMSO, where no sacrificial electron donor was required, uncovering a unique solvent effect capable of promoting the porphyrin catalysis.

A SmI2-mediated reductive cyclisation reaction using the trifluoroacetamide group as the radical precursor

A samarium(II)-mediated reductive cyclisation reaction with the aminoketyl radical from the trifluoroacetamide group for synthesising 2-trifluoromethylindolines was developed. This reaction is the first example of using an acyclic amide group, which is considered difficult to react with SmI2, in a reductive cyclisation. Additionally, the conversion of the obtained product into 2-trifluoromethylindole was achieved.

Silver-Enabled Dearomative Trifluoromethoxylation of Indoles

The only known method for the dearomative trifluoromethoxylation of indoles is preliminary, with only one substrate successfully undergoing the reaction. In this study, we not only developed a broadly applicable method for indole dearomative trifluoromethoxylation but also achieved divergent trifluoromethoxylation by fine-tuning the reaction conditions. Under optimized conditions, with a silver salt and an easily handled OCF3 reagent, various indoles smoothly underwent dearomatization to afford a diverse array of ditrifluoromethoxylated indolines in 50-84% isolated yields with up to 37:1 diastereoselectivity, and fluorinated trifluoromethoxylated indolines were obtained with exclusive trans selectivity. In addition, the reaction conditions were compatible with other heteroaromatic rings as well as styrene moieties.

Visible Light-Induced Metal-Free Fluoroalkylations

Fluoroalkylation is a crucial synthetic process that enables the modification of molecules with fluoroalkyl groups, which can enhance the properties of compounds and have potential applications in medicine and materials science. The utilization of visible light-induced, metal-free methods is of particular importance as it provides an environmentally friendly alternative to traditional methods and eliminates the potential risks associated with metal-catalyst toxicity. This Account describes our studies on visible light-induced, metal-free fluoroalkylation processes, which include the use of organic photocatalysts or EDA complexes. We have utilized organophotocatalysts such as Nile red, tri(9-anthryl)borane, and an indole-based tetracyclic complex, as well as catalyst-free EDA chemistry through photoactive halogen bond formation or an unconventional transient ternary complex formation with nucleophilic fluoroalkyl source. A variety of π-systems including arenes/heteroarenes, alkenes, and alkynes have been successfully fluoroalkylated under the developed reaction conditions.

Applications of red light photoredox catalysis in organic synthesis

Photoredox catalysis has emerged as an efficient and versatile approach for developing novel synthetic methodologies. Particularly, red light photocatalysis has attracted more attention due to its intrinsic advantages of low energy, few health risks, few side reactions, and high penetration depth through various media. Impressive progress has been made in this field. In this review, we outline the applications of different photoredox catalysts in a wide range of red light-mediated reactions including direct red light photoredox catalysis, red light photoredox catalysis through upconversion, and dual red light photoredox catalysis. Due to the similarities between near-infrared (NIR) and red light, an overview of NIR-induced reactions is also presented. Lastly, current evidence showing the advantages of red light and NIR photoredox catalysis is also described.

Manganese-Mediated Electrochemical Dearomatization of Indoles To Access 2-Azido Spirocyclic Indolines

An efficient and environmentally friendly electrochemical protocol for dearomatization of indoles was developed, delivering a series of azido-containing spirocyclic indolines with good functional group tolerance. This dearomatization process is proposed to result from the oxidation of Mn^II-N₃ species, supported by cyclic voltammetry experiments. Moreover, synthetic transformations can provide an alternative approach to a range of functionalized indolines.

Red-Light-Induced N,N′-Dipropyl-1,13-dimethoxyquinacridinium-Catalyzed [3+2] Cycloaddition of Cyclopropylamines with Alkenes or Alkynes

A red-light-mediated [3+2] annulation of cyclopropylamines with akenes or alkynes in the presence of N,N′-dipropyl-1,13-dimethoxyquinacridinium is reported. An array of cyclopentane or cyclopentene derivatives with diverse functional groups have been obtained in moderate to excellent yields under mild conditions.

Red Light-Based Dual Photoredox Strategy Resembling the Z-Scheme of Natural Photosynthesis

Photoredox catalysis typically relies on the use of single chromophores, whereas strategies, in which two different light absorbers are combined, are rare. In photosystems I and II of green plants, the two separate chromophores P₆₈₀ and P₇₀₀ both absorb light independently of one another, and then their excitation energy is combined in the so-called Z-scheme, to drive an overall reaction that is thermodynamically very demanding. Here, we adapt this concept to perform photoredox reactions on organic substrates with the combined energy input of two red photons instead of blue or UV light. Specifically, a Cu^I bis(α-diimine) complex in combination with in situ formed 9,10-dicyanoanthracenyl radical anion in the presence of excess diisopropylethylamine catalyzes ca. 50 dehalogenation and detosylation reactions. This dual photoredox approach seems useful because red light is less damaging and has a greater penetration depth than blue or UV radiation. UV-vis transient absorption spectroscopy reveals that the subtle change in solvent from acetonitrile to acetone induces a changeover in the reaction mechanism, involving either a dominant photoinduced electron transfer or a dominant triplet-triplet energy transfer pathway. Our study illustrates the mechanistic complexity in systems operating under multiphotonic excitation conditions, and it provides insights into how the competition between desirable and unwanted reaction steps can become more controllable.

Diastereoselective and enantioselective photoredox pinacol coupling promoted by titanium complexes with a red-absorbing organic dye

The pinacol coupling reaction, a reductive coupling of carbonyl compounds that proceeds through the formation of ketyl radicals in the presence of an electron donor, affords the corresponding 1,2-diols in one single step. The photoredox version of this transformation has been accomplished using different organic dyes or photoactive metal complexes in the presence of sacrificial donors such as tertiary amines or Hantzsch's ester. Normally, the homo-coupling of such reactive ketyl radicals is neither diastereo- nor enantio-selective. Herein, we report a highly diastereoselective pinacol coupling reaction of aromatic aldehydes promoted by 5 mol% of the non-toxic, inexpensive and available Cp₂TiCl₂ complex. The key feature that allows the complete control of diastereoselectivity is the employment of a red-absorbing organic dye in the presence of a redox-active titanium complex. Taking advantage of the well-tailored photoredox potential of this organic dye, the selective reduction of Ti(iv) to Ti(iii) is achieved. These conditions enable the formation of the d,l (syn) diastereoisomer as the favored product of the pinacol coupling (d.r. > 20 : 1 in most of the cases). Moreover, employing a simply prepared chiral SalenTi complex, the new photoredox reaction gave a complete diastereoselection for the d,l diastereoisomer, and high enantiocontrol (up to 92% of enantiomeric excess).

A metallaphotoredox, diastereoselective and enantioselective pinacol coupling reaction promoted by titanium complexes with the use of a red-absorbing organic dye was developed.

Application of Aromatic Substituted 2,2,2-Trifluoro Diazoethanes in Organic Reactions

Abstract:

This review provides an overview of metal-, nonmetal-, light-, or catalyst free-promoting reactions of aromatic substituted 2,2,2-trifluoro diazoethanes with organic molecules for the synthesis of trifluoromethyl-substituted compounds. Several approaches will be reviewed and divided into (i) copper-, iron-, Trop(BF4)-, B(C6F5)3-, light-, or rhodium-promoted reactions of aromatic substituted 2,2,2-trifluoro diazoethanes with silanes, amines, mercaptans, phosphonates, p-cyanophenol, benzoic acid, diphenylphosphinic acid, boranes and nBu3SnH, (ii) rhodium-catalyzed reactions of aromatic substituted 2,2,2-trifluoro diazoethanes with amides and phenylhydroxylamine, (iii) copper-, rhodium-, silver-, and light-catalyzed reactions of aromatic substituted 2,2,2-trifluoro diazoethanes with alkynes, (iv) palladium-, copper-, rhodium- and iron-catalyzed reactions of aromatic substituted 2,2,2-trifluoro diazoethanes with alkenes, (v) BF3·OEt2-, copper-, tin- or TBAB-catalyzed reactions of aromatic substituted 2,2,2-trifluoro diazoethanes with HF·Py, (difluoroiodo)toluene (p-TolIF2), TMSCF3, AgSCF3, TMSCF2Br or 1,3-dicarbonyl compounds, (vi) palladium-, copper-, gold/silver- or rhodium-catalyzed reactions of aromatic substituted 2,2,2-trifluoro diazoethanes with indoles, benzene compounds or pyridines, and (vii) palladium-catalyzed reaction of aromatic substituted 2,2,2-trifluoro diazoethanes with benzyl or allyl bromides.

Acetylene Derivatives of Cationic Diazaoxatriangulenes and Diaza [4]Helicenes ‐ Access to Red Emitters and Planar Chiral Stereochemical Traits

Cationic triangulenes, and related helicenes, constitute a rich class of dyes and fluorophores, usually absorbing and emitting light at low energy, in the orange to red domains. Recently, to broaden the scope of applications, regioselective late‐stage functionalizations on these core moieties have been developed. For instance, with the introduction of electron‐donating groups (EDGs), important bathochromic shifts are observed pushing absorptions towards or in the near‐infrared (NIR) spectral domain while emissive properties disappear essentially completely. Herein, to upset this drawback, acetylene derivatives of cationic diazaoxa triangulenes (DAOTA) and [4]helicenes are prepared (16 examples). Contrary to other EDG‐functionalized derivatives, C≡C− functionalized products remain broadly fluorescent, with red‐shifted absorptions (Δλ_abs up to 25 nm) and emissions (Δλ_em up to 73 nm, Φ_PL up to 51 %). Quite interestingly, a general dynamic stereoisomerism phenomenon is evidenced for the compounds derived from achiral DAOTA cores. At low temperature in ¹H NMR spectroscopy (218 K), N−CH₂ protons become diastereotopic with chemical shifts differences (Δδ) as high as +1.64 ppm. The signal coalescence occurs around 273 K with a barrier of ∼12 kcal mol⁻¹. This phenomenon is due to planar chiral conformations (S_p and R_p configurations), induced by the geometry of the alkyl (n‐propyl) side‐chains next to the acetylenic substituents. Ion pairing studies with Δ‐TRISPHAT anion not only confirm the occurrence of the chiral conformations but evidence a moderate but definite asymmetric induction from the chiral anion onto the cations. Finally, DFT calculations offer a valuable insight on the geometries, the corresponding stereodynamics and also on the very large difference in NMR for some of the diastereotopic protons.

Utilizing Selective Chlorination to Synthesize New Triangulenium Dyes

Functionalization of new sites on the triangulenium structure has been achieved by early-stage chlorination with N-chlorosuccinimide (NCS), giving rise to two new triangulenium dyes (1 and 3). By introducing the chlorine functionalities in the acridinium precursor, positions complementary to those previously obtained by electrophilic aromatic substitution on the final dyes are accessed. The chlorination is selective, giving only one regioisomer for both mono- and dichlorination products. For the monochlorinated acridinium compound, a highly selective ring-closing reaction was discovered, generating a single regioisomer of the cationic [4]helicene product. Further investigations into the mechanism of the [4]helicene formation lead to the first isolation of the previously proposed intermediate of the two-step S_NAr reaction, key to all aza-bridged triangulenium and helicenium systems. Late-stage functionalization of DAOTA⁺ with NCS gave rise to a different dichlorinated compound (2). The fully ring closed chlorinated triangulenium dyes 1, 2, and 3 show a redshift in absorption and emission, while maintaining relatively high fluorescence quantum yields of 36%, 26%, and 41% and long fluorescence lifetimes of 15, 12.5, and 16 ns, respectively. Cyclic voltammetry shows that chlorination of the triangulenium dyes significantly lowers reduction potentials and thus allows for efficient tuning of redox and photoredox properties.