Synthesis and Photodimerization of 2- and 2,3-Disubstituted Anthracenes: Influence of Steric Interactions and London Dispersion on Diastereoselectivity

London dispersion forces and steric effects within nanocomposites tune interaction energies and chain conformation

The interplay between attractive London dispersion forces and steric effects due to repulsive forces resulting from the Pauli principle often determines the geometry and stability of nanostructures. Aromatic polyimides (PI) and carbon nanotubes (CNT) were chosen as building blocks as two components in the hetero delocalized electron nanostructures. Two PIs, having the same diamine part and different linkage substituents between two phenyl rings of dianhydride part, one linked with ether bond (C-O-C) (OPI), the other with C-(CF3)2 (FPI), were investigated. Surprisingly, two CNT/PI nanocomposites show distinct failure mode from CNT yielding to CNT pull-out failure. Calculation of the interaction energy and chain conformations of each PI upon CNT was performed by accurate density functional theory (DFT) calculations and molecular dynamic simulation (MDS). OPI chain adopt helically wrapping conformation around CNT with relatively strong interaction energy. FPI chain take the one-side wavelike conformation upon CNT with relatively weak interaction energy.

Increasing the versatility of the biphenyl-fused-dioxacyclodecyne class of strained alkynes

Biphenyl-fused-dioxacyclodecynes are a promising class of strained alkyne for use in Cu-free 'click' reactions. In this paper, a series of functionalised derivatives of this class of reagent, containing fluorescent groups, are described. Studies aimed at understanding and increasing the reactivity of the alkynes are also presented, together with an investigation of the bioconjugation of the reagents with an azide-labelled protein.

Photoreactivity of an Exemplary Anthracene Mixture Revealed by NMR Studies, including a Kinetic Approach

Anthracenes are an important class of acenes. They are being utilized more and more often in chemistry and materials sciences, due to their unique rigid molecular structure and photoreactivity. In particular, photodimerization can be harnessed for the fabrication of novel photoresponsive materials. Photodimerization between the same anthracenes have been investigated and utilized in various fields, while reactions between varying anthracenes have barely been investigated. Here, Nuclear Magnetic Resonance (NMR) spectroscopy is employed for the investigation of the photodimerization of two exemplary anthracenes: anthracene (A) and 9-bromoanthracene (B), in the solutions with only A or B, and in the mixture of A and B. Estimated k values, derived from the presented kinetic model, showed that the dimerization of A was 10 times faster in comparison with B when compounds were investigated in separate samples, and 2 times faster when compounds were prepared in the mixture. Notably, the photoreaction in the mixture, apart from AA and BB, additionally yielded a large amount of the AB mixdimer. Another important advantage of investigating a mixture with different anthracenes is the ability to estimate the relative reactivity for all the reactions under the same experimental conditions. This results in a better understanding of the photodimerization processes. Thus, the rational photofabrication of mix-anthracene-based materials can be facilitated, which is of crucial importance in the field of polymer and material sciences.

Recent advances in the syntheses of anthracene derivatives

Anthracene and anthracene derivatives have been extensively studied over the years because of their interesting photophysical, photochemical, and biological properties. They are currently the subject of research in several areas, which investigate their use in the biological field and their application in OLEDs, OFETs, polymeric materials, solar cells, and many other organic materials. Their synthesis remains challenging, but some important preparative methods have been reported, especially in the last decade. This review presents an update of the recent strategies that have been employed to prepare anthracene derivatives. It encompasses papers published over the last twelve years (2008–2020) and focuses on direct and indirect methods to construct anthracene and anthraquinone frameworks.

Could London Dispersion Force Control Regioselective (2 + 2) Cyclodimerizations of Benzynes? YES: Application to the Synthesis of Helical Biphenylenes

In recent years, London dispersion interactions, which are the attractive component of the van der Waals potential, have been found to play an important role in controlling the regio- and/or stereoselectivity of various reactions. Particularly, the dispersion interactions between substrates and catalysts (or ligands) are dominant in various selective catalyzes. In contrast, repulsive steric interactions, rather than the attractive dispersion interactions, between bulky substituents are predominant in most of the noncatalytic reactions. Herein, we demonstrate the first example of London dispersion-controlled noncatalytic (2 + 2) cyclodimerization of substituted benzynes to selectively afford proximal biphenylenes in high yields and regioselectivities, depending on the extent of dispersion interactions in the substituents. This method can be applied for the synthesis of novel helical biphenylenes, which would be fascinating for chemists as these compounds are potential skeletons for ligands, catalysts, and medicines.

Diels-Alder reactions and electrophilic substitutions with atypical regioselectivity enable functionalization of terminal rings of anthracene

Reversing the regioselectivity of the renowned Diels-Alder reaction by overriding the usual thermodynamic and kinetic governing factors has always been a formidable challenge to synthetic organic chemists. Anthracenes are well-known to undergo [4 + 2]-cycloadditions with dienophiles at their 9,10-positions (central ring) over 1,4-positions (terminal ring) guided by the relative aromatic stabilization energy of the two possible products, and also by harboring the largest orbital coefficients of the highest occupied molecular orbital (HOMO) at the 9,10-positions. We, herein, report a 1,4-selective [4 + 2]-cycloaddition strategy of 9,10-unsubstituted anthracenes by installing electron-donating substituents on the terminal rings which is heretofore unprecedented to the best of our knowledge. The developed synthetic strategy does not require any premeditated engagement of the 9,10-positions either with any sterically bulky or electron-withdrawing substituents and allows delicate calibration of the regioselectivity by modulating the electron-donating strength of the substituents on the terminal rings. Likewise, the regioselective functionalization of the terminal anthracene ring in electrophilic substitution reactions is demonstrated. A mechanistic rationale is offered with the aid of detailed computational studies, and finally, synthetic applications are presented.

Regiocontrolled dimerization of asymmetric diazaheptacene derivatives toward X-shaped porous semiconductors

Conformationally rigid X-shaped PAHs are attracting interest due to their self-assembly into unique networks and as models to study through-space exciton and charge delocalization in one single molecule. We report here the synthesis of X-shaped PAHs by dimerization of diazaheptacene diimides. The diimide groups are employed to effectively direct the self-assembly into antiparallel dimer aggregates, which assist the compounds to undergo a regiocontrolled [4 + 4] dimerization, leading to an X-shaped conformation bearing electron-poor and -rich subunits. The resulting PAHs are found to pack in 2D layers with large open channels and infinite π⋯π arrays. Furthermore, these highly crystalline porous materials serve as electron-transporting materials in OFETs due to the long-range π-stacked arrays in the layers. This work presents a potentially generalizable strategy, which may provide a unique class of porous semiconductors for organic devices, taking advantage of their open channels.

The synthesis of conformationally rigid X-shaped PAHs by regiocontrolled cyclodimerization of diazaheptacene diimides is presented. The resulting porous materials exhibit enhanced semiconducting behaviors with large open channels.

Modulating the Electronic and Solid-State Structure of Organic Semiconductors by Site-Specific Substitution: The Case of Tetrafluoropentacenes

The properties as well as solid-state structures, singlet fission, and organic field-effect transistor (OFET) performance of three tetrafluoropentacenes (1,4,8,11: 10, 1,4,9,10: 11, 2,3,9,10: 12) are compared herein. The novel compounds 10 and 11 were synthesized in high purity from the corresponding 6,13-etheno-bridged precursors by reaction with dimethyl 1,2,4,5-tetrazine-3,6-dicarboxylate at elevated temperatures. Although most of the molecular properties of the compounds are similar, their chemical reactivity and crystal structures differ considerably. Isomer 10 undergoes the orbital symmetry forbidden thermal [4+4] dimerization, whereas 11 and 12 are much less reactive. The isomers 11 and 12 crystallize in a herringbone motif, but 10 prefers π-π stacking. Although the energy of the first electric dipole-allowed optical transition varies only within 370 cm-1 (0.05 eV) for the neutral compounds, this amounts to roughly 1600 cm-1 (0.20 eV) for radical cations and 1300 cm-1 (0.16 eV) for dications. Transient spectroscopy of films of 11 and 12 reveals singlet-fission time constants (91±11, 73±3 fs, respectively) that are shorter than for pentacene (112±9 fs). OFET devices constructed from 11 and 12 show close to ideal thin-film transistor (TFT) characteristics with electron mobilities of 2×10-3 and 6×10-2  cm2  V-1  s-1 , respectively.

An Expedient Route to 9-arylmethylanthracene Derivatives via Tandem Ni-catalyzed Alkene Dicarbofunctionalization and Acid-promoted Cyclization-aromatization

We report a nickel-catalyzed one pot synthesis of 9-arylmethylanthracene motifs, which find applications in medicinal and material chemistry. In this synthesis, we apply three component alkene dicarbofunctionalization of 2-vinylaldimines with aryl iodides and arylzinc reagent to generate a 1,1,2-diarylethyl scaffold, which then undergoes an acidpromoted cyclization followed by aromatization to furnish 9-arylmethylanthracene cores. With the new method, a number of differently-substituted 9-arylmethylanthracene derivatives can be synthesized in good yields.