Visible Light-Driven Azidation/Difunctionalization of Vinyl Arenes with Azidobenziodoxole under Copper Catalysis

Photoinduced Azidoamination of Styrenes Using Sodium Azide and (Diphenylmethylene)amino Benziodoxolone

Herein, we report the radical azidoamination of styrenes via the use of a combination of sodium azide and (diphenylmethylene)amino benziodoxolone under visible-light irradiation. This approach to unsymmetrical diamination provides a simple and practical method for constructing vicinal diamine scaffolds with two distinct and easily modifiable amino functionalities.

Photoinduced Cascade Reaction of Ene-Yne-Oxazoles with Trimethylsilyl Azide and N-Iodosuccinamide: Synthesis of Azidyl Spiroindenoxazolones

An intriguing photoinduced azidation cyclization of ene-yne-oxazolones using trimethylsilyl azide (TMSN3) as an azide source and N-iodosuccinimide (NIS) as the iodine source provided access to the corresponding iodobenzylidene spiroindenoxazolones in good yields as a 1:1 mixture of diastereomers (d.r. ratio). A simple and mild metal-free condition was developed by using blue LEDs to induce the formation of the azidyl radical from TMS-N3 as an azide source followed by its aza-1,4-addition and the ensuing 5-exo-dig cyclization to forge multiple bond formations of C─C, C─N, and C─I to furnish the desired spiroindenoxazolones.

Photocatalyzed Azidofunctionalization of Alkenes via Radical-Polar Crossover

The azidofunctionalization of alkenes under mild conditions using commercially available starting materials and easily accessible reagents is reported based on a radical-polar crossover strategy. A broad range of alkenes, including vinyl arenes, enamides, enol ethers, vinyl sulfides, and dehydroamino esters, were regioselectively functionalized with an azide and nucleophiles such as azoles, carboxylic acids, alcohols, phosphoric acids, oximes, and phenols. The method led to a more efficient synthesis of 1,2-azidofunctionalized pharmaceutical intermediates when compared to previous approaches, resulting in both reduction of step count and increase in overall yield. The scope and limitations of these transformations were further investigated through a standard unbiased selection of 15 substrate combinations out of 1,175,658 possible using a clustering technique.

Retinoids Molecular Probes by Late-stage Azide Insertion - Functional Tools to Decrypt Retinoid Metabolism

Studying the complex and intricate retinoids metabolic pathways by chemical biology approaches requires design and synthesis of biologically functional molecular probes. Only few of such molecular retinoid probes could be found in literature, most of them bearing a molecular structure quite different from natural retinoids. To provide close-to-native retinoid probes, we have developed a versatile late-stage method for the insertion of azide function at the C4 position of several retinoids. This one-step process opens straightforward access to different retinoid and carotenoid probes from commercially available precursors. We have further demonstrated that the different molecular probes retain ability of the original compound to activate genes' transcription, despite azide insertion, highlighting biological activities that were further validated in zebrafish in vivo model. The present work paves the way to future studies on vitamin A's metabolism.

Photoinduced Copper-Catalyzed Asymmetric Three-Component Radical 1,2-Azidooxygenation of 1,3-Dienes

Radical-involved multicomponent difunctionalization of 1,3-dienes has recently emerged as a promising strategy for rapid synthesis of valuable allylic compounds in one-pot operation. However, the expansion of radical scope and enantiocontrol remain two major challenges. Herein, we describe an unprecedented photoinduced copper-catalyzed highly enantioselective three-component radical 1,2-azidooxygenation of 1,3-dienes with readily available azidobenziodazolone reagent and carboxylic acids. This mild protocol exhibits a broad substrate scope, high functional group tolerance, and exceptional control over chemo-, regio- and enantioselectivity, providing practical access to diverse valuable azidated chiral allylic esters. Mechanistic studies imply that the chiral copper complex is implicated as a bifunctional catalyst in both the photoredox catalyzed azidyl radical generation and enantioselective radical C-O cross-coupling.

Visible-light-induced copper-catalyzed oxidative esterification of α-azidoketones with diazoacetates: access to α-acyloxyacetates

A copper(II)-catalyzed 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU)-mediated synthesis of α-acyloxyacetates from α-azidoketones and diazoacetates under visible light at room temperature is described. This reaction involves an oxidative esterification process, leading to the formation of two new C-O bonds with the elimination of dinitrogen molecules in the overall process. 20 examples of α-acyloxyacetates were synthesized in high yields (70-86%) by coupling various α-azidoketones with diazoacetates. α-Azidoketones containing electron-donating groups (Me, MeO), electron-withdrawing groups (CN, NO2), halogen atoms (Cl, Br), and other aryl groups are compatible with various substituted diazoacetates (ethyl, tertiary butyl, benzyl), resulting in the formation of α-acyloxyacetates.

Free Radicals in the Queue: Selective Successive Addition of Azide and N-Oxyl Radicals to Alkenes

The selective successive addition of azide (•N3) and N-oxyl radicals to alkenes is demonstrated, despite each of the two radicals being known to attack C═C bonds and the mixture of radical adducts possibly being expected. The proposed radical mechanism was supported by density functional theory calculations, electron paramagnetic resonance, and radical trapping experiments. The reaction proceeds at room temperature with the available reagents: NaN3, N-hydroxy compounds, and PhI(OAc)2 as the oxidant. The method can be applied for N-hydroxyimides, N-hydroxyamides, N-hydroxybenzotriazole, and oximes as N-oxyl radical precursors. Vinylarenes, aliphatic alkenes, and even electron-deficient methyl methacrylate were successfully functionalized.

Photoactive Copper Complexes: Properties and Applications

Photocatalyzed and photosensitized chemical processes have seen growing interest recently and have become among the most active areas of chemical research, notably due to their applications in fields such as medicine, chemical synthesis, material science or environmental chemistry. Among all homogeneous catalytic systems reported to date, photoactive copper(I) complexes have been shown to be especially attractive, not only as alternative to noble metal complexes, and have been extensively studied and utilized recently. They are at the core of this review article which is divided into two main sections. The first one focuses on an exhaustive and comprehensive overview of the structural, photophysical and electrochemical properties of mononuclear copper(I) complexes, typical examples highlighting the most critical structural parameters and their impact on the properties being presented to enlighten future design of photoactive copper(I) complexes. The second section is devoted to their main areas of application (photoredox catalysis of organic reactions and polymerization, hydrogen production, photoreduction of carbon dioxide and dye-sensitized solar cells), illustrating their progression from early systems to the current state-of-the-art and showcasing how some limitations of photoactive copper(I) complexes can be overcome with their high versatility.

A copper-catalyzed four-component reaction of arylcyclopropanes, nitriles, carboxylic acids and N-fluorobenzenesulfonimide: facile synthesis of imide derivatives

An unprecedented copper-catalyzed four-component reaction of arylcyclopropanes, nitriles, carboxylic acids and N-fluorobenzenesulfonimide (NFSI) has been successfully developed, which represents the first example of a four-component reaction of non-donor-acceptor cyclopropanes. A wide range of imide derivatives were efficiently synthesized in excellent yields under mild conditions.

The advent of electrophilic hydroxylamine-derived reagents for the direct preparation of unprotected amines

Electrophilic aminating reagents have seen a renaissance in recent years as effective nitrogen sources for the synthesis of unprotected amino functionalities. Based on their reactivity, several noble and non-noble transition metal catalysed amination reactions have been developed. These include the aziridination and difunctionalisation of alkenes, the amination of arenes as well as the synthesis of aminated sulfur compounds. In particular, the use of hydroxylamine-derived (N-O) reagents, such as PONT (PivONH3OTf), has enabled the introduction of unprotected amino groups on various different feedstock compounds, such as alkenes, arenes and thiols. This strategy obviates undesired protecting-group manipulations and thus improves step efficiency and atom economy. Overall, this feature article gives a recent update on several reactions that have been unlocked by employing versatile hydroxylamine-derived aminating reagents, which facilitate the generation of unprotected primary, secondary and tertiary amino groups.

Copper-photocatalyzed ATRA reactions: concepts, applications, and opportunities

Atom transfer radical addition (ATRA) reactions are linchpin transformations in synthetic chemistry enabling the atom-economic difunctionalization of alkenes. Thereby a rich chemical space can be accessed through smart combinations of simple starting materials. Originally, these reactions required toxic and hazardous radical initiators or harsh thermal activation and thus, the recent resurgence and dramatic evolution of photocatalysis appeared as an attractive complement to catalyze such transformations in a mild and energy-efficient manner. Initially, this technique relied primarily on complexes of precious metals, such as ruthenium or iridium, to absorb the visible light. Hence, copper photocatalysis rapidly developed into a powerful alternative, not just from an economic point of view. Originally considered to be disadvantageous as a pathway for deactivation by quenching their excited state, the dynamic nature of Cu-complexes enables them to undergo facile ligand exchange and thus opens up special opportunities for transformations utilizing their inner-coordination sphere. Moreover, the ability of Cu(II), representing a persistent radical, to capture incipient radicals offers the possibility to access heretofore elusive two-component, but also three-component, ATRA reactions, not feasible with ruthenium or iridium catalysts. In this regard, the idea of using Cu(I)-substrate assemblies as active photocatalysts is an emerging field to achieve such 3-component coupling reactions even under enantioselective control, which is reflected by an increasing number of reports being covered in this review.

Multicomponent reactions and photo/electrochemistry join forces: atom economy meets energy efficiency

Visible-light photoredox catalysis has been regarded as an extremely powerful tool in organic chemistry, bringing the spotlight back to radical processes. The versatility of photocatalyzed reactions has already been demonstrated to be effective in providing alternative routes for cross-coupling as well as multicomponent reactions. The photocatalyst allows the generation of high-energy intermediates through light irradiation rather than using highly reactive reagents or harsh reaction conditions. In a similar vein, organic electrochemistry has experienced a fruitful renaissance as a tool for generating reactive intermediates without the need for any catalyst. Such milder approaches pose the basis toward higher selectivity and broader applicability. In photocatalyzed and electrochemical multicomponent reactions, the generation of the radical species acts as a starter of the cascade of events. This allows for diverse reactivity and the use of reagents is usually not covered by classical methods. Owing to the availability of cheaper and more standardized photo- and electrochemical reactors, as well as easily scalable flow-setups, it is not surprising that these two fields have become areas of increased research interest. Keeping these in view, this review is aimed at providing an overview of the synthetic approaches in the design of MCRs involving photoredox catalysis and/or electrochemical activation as a crucial step with particular focus on the choice of the difunctionalized reagent.

Chemical versatility of azide radical: journey from a transient species to synthetic accessibility in organic transformations

The generation of azide radical (N₃˙) occurs from its precursors primarily via a single electron transfer (SET) process or homolytic cleavage by chemical methods or advanced photoredox/electrochemical methods. This in situ generated transient open-shell species has unique characteristic features that set its reactivity. In the past, the azide radical was widely used for various studies in radiation chemistry as a 1e^- oxidant of biologically important molecules, but now it is being exploited for synthetic applications based on its addition and intermolecular hydrogen atom transfer (HAT) abilities. Due to the significant role of nitrogen-containing molecules in synthesis, drug discovery, biological, and material sciences, the direct addition onto unsaturated bonds for the simultaneous construction of C-N bond with other (C-X) bonds are indeed worth highlighting. Moreover, the ability to generate O- or C-centered radicals by N₃˙ via electron transfer (ET) and intermolecular HAT processes is also well documented. The purpose of controlling the reactivity of this short-lived intermediate in organic transformations drives us to survey: (i) the history of azide radical and its structural properties (thermodynamic, spectroscopic, etc.), (ii) chemical reactivities and kinetics, (iii) methods to produce N₃˙ from various precursors, (iv) several significant azide radical-mediated transformations in the field of functionalization with unsaturated bonds, C-H functionalization via HAT, tandem, and multicomponent reaction with a critical analysis of underlying mechanistic approaches and outcomes, (v) concept of taming the reactivity of azide radicals for potential opportunities, in this review.

Hypervalent Iodine(III) Reagents with Transferable Primary Amines: Structure and Reactivity on the Electrophilic α-Amination of Stabilized Enolates

A new family of hypervalent iodine reagents containing transferable primary amine groups is described. Benziodoxolone-based reagents were synthesized on the gram-scale through operationally simple reactions in up to quantitative yields. These bench-stable solids were characterized by X-ray analysis and successfully employed in the α-amination of indanone-based β-ketoesters in up to 83% yield. Mechanistic studies indicate a substitution mechanism involving an electrophilic amine.

Recent advances in visible-light mediated functionalization of olefins and alkynes using copper catalysts

Over the past decade, visible-light photoredox catalysis has blossomed as a powerful strategy and offers a discrete activation mode complementary to thermal controlled reactions. Visible-light-mediated photoredox catalysis also offers exciting...

Metallaphotoredox: The Merger of Photoredox and Transition Metal Catalysis

The merger of photoredox catalysis with transition metal catalysis, termed metallaphotoredox catalysis, has become a mainstay in synthetic methodology over the past decade. Metallaphotoredox catalysis has combined the unparalleled capacity of transition metal catalysis for bond formation with the broad utility of photoinduced electron- and energy-transfer processes. Photocatalytic substrate activation has allowed the engagement of simple starting materials in metal-mediated bond-forming processes. Moreover, electron or energy transfer directly with key organometallic intermediates has provided novel activation modes entirely complementary to traditional catalytic platforms. This Review details and contextualizes the advancements in molecule construction brought forth by metallaphotocatalysis.

Visible-light-mediated copper photocatalysis for organic syntheses

Photoredox catalysis has been applied to renewable energy and green chemistry for many years. Ruthenium and iridium, which can be used as photoredox catalysts, are expensive and scarce in nature. Thus, the further development of catalysts based on these transition metals is discouraged. Alternative photocatalysts based on copper complexes are widely investigated, because they are abundant and less expensive. This review discusses the scope and application of photoinduced copper-based catalysis along with recent progress in this field. The special features and mechanisms of copper photocatalysis and highlights of the applications of the copper complexes to photocatalysis are reported. Copper-photocatalyzed reactions, including alkene and alkyne functionalization, organic halide functionalization, and alkyl C-H functionalization that have been reported over the past 5 years, are included.

Selective Azidooxygenation of Alkenes Enabled by Photo-induced Radical Transfer Using Aryl-λ3-azidoiodane Species

The photolytic radical-induced vicinal azidooxygenation of synthetically important and diverse functionalized substrates including unactivated alkenes is reported. The photoredox-catalyst/additive-free protocol enables intermolecular oxyazidation by simultaneously incorporating two new functionalities; C-O and C-N across the C=C double bond in a selective manner. Mechanistic investigations reveal the intermediacy of the azidyl radical facilitated via the photolysis of λ³-azidoiodane species and cascade proceeding to generate an active carbon-centered radical. The late-stage transformations of azido- and oxy-moieties were amply highlighted by assembling high-value drug analogs and bioactive skeletons.

Structure and Reactivity of N-Heterocyclic Alkynyl Hypervalent Iodine Reagents

Ethynylbenziodoxol(on)e (EBX) cyclic hypervalent iodine reagents have become popular reagents for the alkynylation of radicals and nucleophiles, but only offer limited possibilities for further structure and reactivity fine-tuning. Herein, the synthesis of new N-heterocyclic hypervalent iodine reagents with increased structural flexibility based on amide, amidine and sulfoximine scaffolds is reported. Solid-state structures of the reagents are reported and the analysis of the I-Calkyne bond lengths allowed assessing the trans-effect of the different substituents. Molecular electrostatic potential (MEP) maps of the reagents, derived from DFT computations, revealed less pronounced σ-hole regions for sulfonamide-based compounds. Most reagents reacted well in the alkynylation of β-ketoesters. The alkynylation of thiols afforded more variable yields, with compounds with a stronger σ-hole reacting better. In metal-mediated transformations, the N-heterocyclic hypervalent iodine reagents gave inferior results when compared to the O-based EBX reagents.

Recent Synthetic Applications of the Hypervalent Iodine(III) Reagents in Visible-Light-Induced Photoredox Catalysis

The synergistic combination of visible-light-induced photoredox catalysis with hypervalent iodine(III) reagents (HIRs) represents a particularly important achievement in the field of hypervalent iodine chemistry, and numerous notable organic transformations were achieved in a mild and environmentally benign fashion. This account intends to summarize recent synthetic applications of HIRs in visible-light-induced photoredox catalysis, and they are organized in terms of the photochemical roles of HIRs played in reactions.

Palladium(II)-Catalyzed Enantioselective Azidation of Unactivated Alkenes

The first Pd-catalyzed enantioselective azidation of unactivated alkenes has been established by using readily accessible 1-azido-1,2-benziodoxol-3(1H)-one (ABX) as an azidating reagent, which affords a wide variety of structurally diverse 3-N₃ -substituted piperidines in good yields with excellent enantioselectivity. The reaction features good functional-group compatibility and mild reaction conditions. Notably, both an electrophilic azidating reagent and the sterically bulky chiral pyridinyl-oxazoline (Pyox) ligand are crucial to the successful reaction.

Additions of Aldehyde-Derived Radicals and Nucleophilic N-Alkylindoles to Styrenes by Photoredox Catalysis

The consecutive addition of acyl radicals and N-alkylindole nucleophiles to styrenes was established, as well as some additional radical–nucleophile combinations. Both aryl and aliphatic aldehydes give reasonable yields. The reaction proceeds best for α-substituted styrenes, effectively creating a quaternary all-carbon center. Some iridium-based photoredox systems are catalytically active; furthermore, a base is needed in this transformation. Radicals are formed by reductive perester cleavage and hydrogen atom transfer.