Simultaneous Analysis of Molecular Orientation and Quantity Change of Constituents in a Thin Film Using pMAIRS

Organic Electrochemical Transistors Based on Blend Films with Thermoresponsive Polymer

Organic electrochemical transistors (OECTs) are biocompatible devices with significant potential for biosensing. Functionalizing the channel layers is essential for improving the selectivity and sensitivity of OECT-based biosensors. A straightforward one-step fabrication method for these functionalized channel layers can simplify the production process for these devices. This study developed OECT devices based on a polymer blend of poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) and poly(N-isopropylacrylamide) (PNIPAM) that respond to temperature changes. Structural analyses of the blended films showed that hole transport through PEDOT is maintained even after blending, and the PNIPAM is segregated at the surface. To overcome the large chain conformational change that occurs with temperature changes, a flexible poly(ethylene glycol) diglycidyl ether (PEGDE) crosslinker is used in addition to the conventional crosslinker, (3-glycidyloxypropyl)trimethoxysilane (GOPS). As a result, the PEGDE + GOPS binary crosslinker system exhibited reversible responses to temperature cycling. These results highlight two key considerations when designing a functional mixed-conductor film based on a polymer blend system: (1) vertical phase separation and (2) proper crosslinker selection.

Ultra-Slippery Hydrophilic Surfaces by Hybrid Monolayers

Slippery solid surfaces with low droplet contact angle hysteresis (CAH) are crucial for applications in thermal management, energy harvesting, and environmental remediation. Traditionally, reducing CAH has been achieved by enhancing surface homogeneity. This work challenges this conventional approach by developing slippery yet hydrophilic surfaces through hybrid monolayers composed of hydrophilic polyethylene glycol (PEG)-silane and hydrophobic alkyl-silane molecules. These hybrid surfaces exhibited exceptionally low CAH (<2°), outperforming well-established homogeneous slippery surfaces. Molecular structural analyses suggested that the remarkable slipperiness is due to a unique spatially staggered molecular configuration, where longer PEG chains shield shorter alkyl chains, thus creating additional free volume while ensuring surface coverage. This was supported by the observation of decreased CAH with increasing temperature, highlighting the role of grafted chain mobility in enhancing slipperiness by self-smoothing and fluid-like behaviors. Furthermore, condensation experiments demonstrated the exceptional performance of the hydrophilic slippery surfaces in dew harvesting due to superior condensation nucleation, droplet coalescence, and self-sweeping efficiency. These findings offer a novel paradigm for designing advanced slippery surfaces and provide valuable insights into the molecular mechanisms governing dynamic wetting.

Quantitative Analysis of Photochemical Reactions in Pentacene Precursor Films

On-surface reactions are rapidly gaining attention as a chemical technique for synthesizing organic functional materials, such as graphene nanoribbons and molecular semiconductors. Quantitative analysis of such reactions is essential for fabricating high-quality film structures, but until our recent work using p-polarized multiple-angle incidence resolution spectrometry (pMAIRS), no analytical technique is available to quantify the reaction rate. In the present study, the pMAIRS technique is employed to analyze the photochemical reaction from 6,13-dihydro-6,13-ethanopentacene-15,16-dione to pentacene in thin films. The spectral analysis on a pMAIRS principle readily reveals the photoconversion rate accurately without other complicated calculations. Thus, this study underlines that the pMAIRS technique is a powerful tool for quantitative analysis of on-surface reactions, as well as molecular orientation.

Reaction Dynamics of C(NH2)3SnI3 Formation from Vacuum-Deposited C(NH2)3I and SnI2 Bilayer Thin Films Investigated by In Situ Infrared Multiple-Angle Incidence-Resolved Spectroscopy

Understanding the formation process of organic-inorganic halide perovskite (OIHP) thin films is important for the fabrication of high-quality thin films, which, in turn, are crucial for achieving high-performance devices. To address this challenge, we developed an in situ system of infrared multiple-angle incidence-resolved spectroscopy (IR-MAIRS) combined with a vacuum deposition system. "Orientation-free" isotropic spectra constructed from IR-MAIRS spectra enable us to perform quantitative analysis of the formation process of C(NH2)3SnI3 (GASnI3) thin films from unreacted C(NH2)3I (guanidine hydroiodide (GAI))/SnI2 bilayer structures predeposited in a vacuum. The analysis of the dependence of the GASnI3 formation rate on the reaction temperature using the Avrami model has revealed that a diffusion-controlled reaction process of GAI and SnI2 governs the formation kinetics. The present study points to the usefulness of in situ IR-MAIRS analysis in understanding the growth mechanisms of vacuum-deposited OIHP thin films and hence the potential to accelerate the development of vacuum processes for the fabrication of high-quality OIHP thin films.

Voltammetric and In Situ Spectroscopic Investigations on the Redox Processes of Trioxotriangulene Neutral Radicals on Graphite Electrodes

To investigate the microscopic electrochemical dynamics of a stable trioxotriangulene (TOT) organic neutral π-radical on a graphite electrode surface, voltammetric and in situ infrared (IR) spectroelectrochemical studies were conducted using electrolyte solutions containing TOT monoanions. Upright columnar crystals (face-on alignment) of the TOT neutral radical were preferentially formed and dissolved in a rather reversible manner in the electrolyte with a low concentration of TOT monoanion under electrochemical conditions; however, more flat-lying columnar crystals (edge-on alignment) were formed in a higher concentration electrolyte. The flat-lying crystals remained on the graphite surface even at a fully reduced potential, owing to the lack of direct π-π interactions between the molecules and the graphite electrode. In situ IR attenuated total reflectance spectroscopy analyses successfully characterized the alignment of the columnar crystals of the TOT neutral radicals and their electrochemical behaviors, including the possible origins of the irreversible redox reaction of TOT on the graphite electrode.

Stereoisomer-dependent conversion of dinaphthothienothiophene precursor films

Soluble precursor materials of organic semiconductors are employed for fabricating solution-processable thin film devices. While the so-called precursor approach has already been tried for various organic electronic devices such as transistors and solar cells, understanding of the conversion process in the film lags far behind. Here, we report that molecular aggregation of the precursor compound significantly influences the thermal conversion reaction in the film. For this study, two stereoisomers of a dinaphthothienothiophene (DNTT) precursor that are the endo- and exo-DNTT-phenylmaleimide monoadducts are focused on. The structural change during the thermal conversion process has been investigated by a combination of infrared spectroscopy and X-ray diffraction techniques. The results show that the endo-isomer is readily converted to DNTT in the film by heating, whereas the exo-isomer exhibits no reaction at all. This reaction suppression is found to be due to the self-aggregation property of the exo-isomer accompanying the intermolecular C–H\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\cdots$$\end{document}⋯O interactions. This finding shows a new direction of controlling the on-surface reaction, as well as the importance of analyzing the film structure at the initial stage of the reaction.

Nanoarchitectonics for Analytical Science at Interfaces and with Supramolecular Nanostructures

For materials development with high-level structural regulations, the emerging concept of nanoarchitectonics has been proposed. Analytical sciences, including sensing/detection, sensors, and related device construction, are active targets of the nanoarchitectonics approach. This review article focuses on the two features of interface and nanostructures are especially focused to discuss nanoarchitectonics for analytical science. Especially, two selected topics, (i) analyses on molecular sensing at interfaces and (ii) sensors using self-assembled supramolecular nanostructures, are exemplified in this review article. In addition to recent general examples, specific molecular recognition at the air-water interface and fabrication of sensing materials upon self-assembly of fullerene units are discussed. Descriptions of these examples indicate that nanoarchitectonics and analytical science share common benefits, and therefore, developments in both research fields should lead to synergies.