Formation of Hollow Gold Nanocrystals by Nanosecond Laser Irradiation

Asymmetrical Plasmon Distribution in Hybrid AuAg Hollow/Solid Coded Nanotubes

Morphological control at the nanoscale paves the way to fabricate nanostructures with desired plasmonic properties. In this study, we discuss the nanoengineering of plasmon resonances in 1D hollow nanostructures of two different AuAg nanotubes, including completely hollow nanotubes and hybrid nanotubes with solid Ag and hollow AuAg segments. Spatially resolved plasmon mapping by electron energy loss spectroscopy (EELS) revealed the presence of high order resonator-like modes and localized surface plasmon resonance (LSPR) modes in both nanotubes. The experimental findings accurately correlated with the boundary element method (BEM) simulations. Both experiments and simulations revealed that the plasmon resonances are intensely present inside the nanotubes due to plasmon hybridization. Based on the experimental and simulated results, we show that the novel hybrid AuAg nanotubes possess two significant coexisting features: (i) LSPRs are distinctively generated from the hollow and solid parts of the hybrid AuAg nanotube, which creates a way to control a broad range of plasmon resonances with one single nanostructure, and (ii) the periodicity of the high-order modes are disrupted due to the plasmon hybridization by the interaction of solid and hollow parts, resulting in an asymmetrical plasmon distribution in 1D nanostructures. The asymmetry could be modulated/engineered to control the coded plasmonic nanotubes.

Ultrafast Laser-Induced Formation of Hollow Gold Nanorods and Their Optical Properties

Laser irradiation has been shown to be an efficient means to modify structures and shapes of plasmonic nanoparticles for tuning their properties. Thermomechanical deformations of single-crystal and penta-twinned gold nanorods by femtosecond laser irradiations have been studied by classical molecular dynamics simulations. It is demonstrated that hollow gold nanorods could be formed by femtosecond laser irradiations under certain conditions of maximum temperatures in nanorods by laser heating and cooling rates due to the extrinsic solvent. For a given maximum temperature and cooling rate, a larger cavity is induced in the irradiated single-crystal nanorod. The results also indicate that at the same cooling rate a higher threshold of maximum temperature can be required for producing the cavity in the twinned nanorod. The optical spectra of the laser-irradiated gold nanorods are calculated, and the shifts in the surface plasmon resonance peak of the nanorods are illustrated due to the thermal reshaping and the plasmon hybridization mechanism. Moreover, we show the formation of the hollow gold nanorod possessing the surface plasmon resonance peak in the second near-infrared window and a relatively small aspect ratio (∼2.8), which is highly desirable and suitable for serving as agents in biomedical imaging and photothermal therapy applications.

Correlating structure, morphology and properties of metal nanostructures by combining single-particle optical spectroscopy and electron microscopy

The nanoscale morphology of metal nanostructures directly defines their optical, catalytic and electronic properties and even small morphological changes can cause significant property variations. On the one hand, this dependence allows for precisely tuning and exploring properties by shape engineering; next to advanced synthesis protocols, post-synthesis modification through tailored laser modification has become an emerging tool to do so. On the other hand, with this interconnection also comes the quest for detailed structure-property correlation and understanding of laser-induced reshaping processes on the individual nanostructure level beyond ensemble averages. With the development of single-particle (ultrafast) optical spectroscopy techniques and advanced electron microscopy such understanding can in principle be gained at the femtosecond temporal and atomic spatial scale, respectively. However, accessing both on the same individual nanostructure is far from straightforward as it requires the combination of optical spectroscopy and electron microscopy. In this Minireview, we highlight key studies from recent years that performed such correlative measurements on the same individual metal nanostructure either in a consecutive ex situ manner or in situ inside the electron microscope. We demonstrate that such a detailed correlation is critical for revealing the full picture of the structure-property relationship and the physics behind light-induced nanostructure modifications. We put emphasis on the advantages and disadvantages of each methodology as well as on the unique information that one can gain only by correlative studies performed on the same individual nanostructure and end with an outlook on possible further development of this field in the near future.

Thermal Sensitivity on Eccentric Gold Hollow Nanoparticles: A Perspective from Atomistic Simulations

Eccentricity is a common feature consequence of several synthesis protocols of hollow nanoshells. Despite the crescent interest in these nanoparticles, it is still unclear how an irregular layer on the nanoparticle impacts the macroscopic properties. Here, we study the thermal stability of eccentric hollow nanoparticles (hNPs) for different sizes and eccentricity values by means of classical molecular dynamics simulations. Our results reveal that eccentricity displays a significant role in the thermal stability of hNPs. We attribute this behavior to the irregular shell contour, which collapses due to the thermal-activated diffusive process from the nanoparticle shell's most thin region. The mechanism is driven at low temperature by the nucleation of stacking faults until the amorphization for larger temperature values. Besides, for some particular eccentric hNPs, the shell suffers a surface reconstruction process, transforming the eccentric hNP into a concentric hNP. We believe that our study on thermal effects in eccentric hNPs has relevance because of their outstanding applications for plasmonic and sensing.

Impact of Single-Pulse, Low-Intensity Laser Post-Processing on Structure and Activity of Mesostructured Cobalt Oxide for the Oxygen Evolution Reaction

Herein, we report nanosecond, single-pulse laser post-processing (PLPP) in a liquid flat jet with precise control of the applied laser intensity to tune structure, defect sites, and the oxygen evolution reaction (OER) activity of mesostructured Co3O4. High-resolution X-ray diffraction (XRD), Raman, and X-ray photoelectron spectroscopy (XPS) are consistent with the formation of cobalt vacancies at tetrahedral sites and an increase in the lattice parameter of Co3O4 after the laser treatment. X-ray absorption spectroscopy (XAS) and X-ray emission spectroscopy (XES) further reveal increased disorder in the structure and a slight decrease in the average oxidation state of the cobalt oxide. Molecular dynamics simulation confirms the surface restructuring upon laser post-treatment on Co3O4. Importantly, the defect-induced PLPP was shown to lower the charge transfer resistance and boost the oxygen evolution activity of Co3O4. For the optimized sample, a 2-fold increment of current density at 1.7 V vs RHE is obtained and the overpotential at 10 mA/cm2 decreases remarkably from 405 to 357 mV compared to pristine Co3O4. Post-mortem characterization reveals that the material retains its activity, morphology, and phase structure after a prolonged stability test.

Optical properties and stability of small hollow gold nanoparticles

In the current work, small hollow Au nanoparticles (d ≈ 16 nm) with excellent thermal stability and high photo-thermal conversion efficiency, which have great potential for use in photo-thermal cancer therapy, were prepared through galvanic replacement reaction between Ag nano-templates and gold salt. The position of surface plasmon resonance (SPR) bands for these nanoparticles could be tuned by varying the amount of gold salt. The hydrophobic hollow nanostructures were made water-dispersible by being encapsulated with poly(maleic anhydride-alt-1-octadecene) - PMAO. The obtained nanostructures were stable in an aqueous solution of NaCl with concentration up to 280 mM. The hollow gold nanoparticles (HGNPs) were then heated using an 808 nm laser at different power densities, the obtained data showed that they are highly photo-thermal stable under a high power density laser up to 1.6 W cm^-2 after three circles of irradiation at 20 min per circle (20 min continuous irradiation for each circle). The facile synthesis of small size HGNPs with a plasmon peak in the near infrared range, colloidal and photo-thermal stability, and high capacity of conversion of photon energy into heat makes them a promising material for photo-thermal and imaging applications.

Three-Dimensional Nanoparticle Transformations Captured by an Electron Microscope

ConspectusThree-dimensional (3D) morphology and composition govern the properties of nanoparticles (NPs). However, due to their high surface-to-volume ratio, the morphology and composition of nanomaterials are not as static as those for their bulk counterparts. One major influence is the increase in relative contribution of surface diffusion, which underlines rapid reshaping of NPs in response to changes in their environment. If not accounted for, these effects might affect the robustness of prospective NPs in practically relevant conditions, such as elevated temperatures, intense light illumination, or changing chemical environments. In situ techniques are promising tools to study NP transformations under relevant conditions. Among those tools, in situ transmission electron microscopy (TEM) provides an elegant platform to directly visualize NP changes down to the atomic scale. By the use of specialized holders or microscopes, external stimuli, such as heat, or environments, such as gas and liquids, can be controllably introduced inside the TEM. In addition, TEM is also a valuable tool to determine NP transformations upon ex situ stimuli such as laser excitation. However, standard TEM yields two-dimensional (2D) projection images of 3D objects. With the growing complexity of NP shapes and compositions, the information that is obtained in this manner is often insufficient to understand intricate diffusion dynamics.In this Account, we describe recent progress on measuring NP transformations in 3D inside the electron microscope. First, we discuss existing possibilities to obtain 3D information using either tomographic methods or the so-called atom counting technique, which utilizes single projection images. Next, we show how these techniques can be combined with in situ holders to quantify diffusion processes on a single nanoparticle level. Specifically, we focus on anisotropic metal NPs at elevated temperatures and in varying gas environments. Anisotropic metal NPs are important for plasmonic applications, because sharp tips and edges result in strong electromagnetic field enhancements. By electron tomography, surface diffusion as well as elemental diffusion can be tracked in monometallic and bimetallic NPs, which can then be directly related to changes in plasmonic properties of these systems. By atom counting, it has furthermore become possible to monitor the evolution of crystalline facets of metal NPs under gas and heat treatments, a change that influences catalytic properties. Next to in situ processes, we also demonstrate the value of electron tomography to assess external laser-induced NP transformations, making it viable to detect structural changes with atomic resolution. The application of the proposed methodologies is by far not limited to metal nanoparticles. In the final section, we therefore outline future material research that can benefit from tracking NP transformations from 3D techniques.

Laser Synthesis and Microfabrication of Micro/Nanostructured Materials Toward Energy Conversion and Storage

Nanomaterials are known to exhibit a number of interesting physical and chemical properties for various applications, including energy conversion and storage, nanoscale electronics, sensors and actuators, photonics devices and even for biomedical purposes. In the past decade, laser as a synthetic technique and laser as a microfabrication technique facilitated nanomaterial preparation and nanostructure construction, including the laser processing-induced carbon and non-carbon nanomaterials, hierarchical structure construction, patterning, heteroatom doping, sputtering etching, and so on. The laser-induced nanomaterials and nanostructures have extended broad applications in electronic devices, such as light-thermal conversion, batteries, supercapacitors, sensor devices, actuators and electrocatalytic electrodes. Here, the recent developments in the laser synthesis of carbon-based and non-carbon-based nanomaterials are comprehensively summarized. An extensive overview on laser-enabled electronic devices for various applications is depicted. With the rapid progress made in the research on nanomaterial preparation through laser synthesis and laser microfabrication technologies, laser synthesis and microfabrication toward energy conversion and storage will undergo fast development.

Hollow Gold Nanoparticles Produced by Femtosecond Laser Irradiation

Metallic hollow nanoparticles exhibit interesting optical properties that can be controlled by geometrical parameters. Irradiation with femtosecond laser pulses has emerged recently as a valuable tool for reshaping and size modification of plasmonic metal nanoparticles, thereby enabling the synthesis of nanostructures with unique morphologies. In this Letter, we use classical molecular dynamics simulations to investigate the solid-to-hollow conversion of gold nanoparticles upon femtosecond laser irradiation. Here, we suggest an efficient method for producing hollow nanoparticles under certain specific conditions, namely that the particles should be heated to a maximum temperature between 2500 and 3500 K, followed by a fast quenching to room temperature, with cooling rates lower than 120 ps. Therefore, we describe the experimental conditions for efficiently producing hollow nanoparticles, opening a broad range of possibilities for applications in key areas, such as energy storage and catalysis.

Photothermal structural modification of porous gold nanoshells via pulsed-laser irradiation: effects of laser wavelengths and surface conditions

We demonstrate the detailed effects of laser wavelengths and nanoparticle surface conditions, as well as laser fluences, in the structural modification of porous gold nanoshells induced by picosecond pulse irradiation.