Enhanced Biocompatibility of Polyampholyte Hydrogels

Quaternized chitosan-based injectable self-healing hydrogel for improving wound management in aging populations

The clinical management and treatment of skin wounds in the elderly present significant challenges due to changes in skin structure and function. This study introduces a novel injectable self-healing hydrogel composed of quaternized chitosan and carboxymethyl chitosan (HACC/CMCS, HC), designed through electrostatic interactions. Its excellent injectability and self-healing properties enhance the application of hydrogel dressings and prolong their functional lifespan. Moreover, the adhesion and flexibility of HC hydrogel contribute to their stability in highly dynamic regions, thereby preventing detachment and enhancing their hemostatic function. The material exhibits excellent biocompatibility and possesses antibacterial properties that protect wounds from external microbial damage, thereby reducing the risk of infection while maintaining a moist environment that facilitates healing. Importantly, the in vivo test have demonstrated that the HC hydrogel significantly enhances collagen deposition, reduces senescent cell accumulation, and accelerates wound closure. Therefore, this study offers a safe, effective, and cost-efficient solution for managing wounds in the aging population.

Modulating the performance of lipase-hydrogel microspheres in a "micro water environment"

In our previous work, we successfully stimulated lipase activity in an anhydrous reaction system using porous polyacrylamide hydrogel microsphere (PPAHM) as a carrier of lipase and free water. However, the effect of the existence state and content of water in lipase-porous polyacrylamide hydrogel microsphere (L-PPAHM) on the interfacial activation remained unclear. In this work, L-PPAHM with different water contents were obtained by water mist rehydration and were used to catalyze the synthesis of conjugated linoleic acid ethyl ester (CLA-EE). The results revealed that there were three existence states of water in L-PPAHM: bound water, semi-bound water and free water, and free water provided the "micro water environment" for the interfacial activation of lipase. The reusability of L-PPAHM with different water contents showed that the activity and stability of L-PPAHM could be achieved by varying the water content of L-PPAHM. The proportion of free water in L-PPAHM increased, and the activity of L-PPAHM increased, but the strength of hydrogen bond interaction between PPAHM and lipase weakened, resulting in the decrease of stability. L-PPAHM with 2/3 of water absorption could ensure sufficient immobilized lipase activity and stability, and its water absorption property could reduce the free water generated during esterification, thus increasing the yield of CLA-EE.

Antiblood Cell Adhesion of Mussel-Inspired Chondroitin Sulfate- and Caffeic Acid-Modified Polycarbonate Membranes

We fabricated a mussel-inspired hemocompatible polycarbonate membrane (PC) modified by the cross-linking of chondroitin sulfate and caffeic acid polymer using CA-CS via a Schiff base and Michael addition reaction and named it CA-CS-PC. The as-fabricated CA-CS-PC membrane shows excellent hydrophilicity with a water contact angle of 0° and a negative surface charge with a zeta potential of -32 mV. The antiadhesion property of the CA-CS-modified PC membrane was investigated by enzyme-linked immunosorbent assay (ELISA), using human plasma protein fibrinogen adsorption studies, and proved to have excellent antiadhesion properties, because of the lower fibrinogen adsorption. In addition, the CA-CS-PC membrane also shows enhanced hemocompatibility. Finally, blood cell attachment tests of the CA-CS-PC membrane were observed by CLSM and SEM, and the obtained results proved that CA-CS-PC effectively resisted cell adhesion, such as platelets and leucocytes. Therefore, this work disclosed a new way to design a simple and versatile modification of the membrane surface by caffeic acid and chondroitin sulfate and apply it for cell adhesion.

Different Curcumin-Loaded Delivery Systems for Wound Healing Applications: A Comprehensive Review

Curcumin or turmeric is the active constituent of Curcuma longa L. It has marvelous medicinal applications in many diseases. When the skin integrity is compromised due to either acute or chronic wounds, the body initiates several steps leading to tissue healing and skin barrier function restoration. Curcumin has very strong antibacterial and antifungal activities with powerful wound healing ability owing to its antioxidant activity. Nevertheless, its poor oral bioavailability, low water solubility and rapid metabolism limit its medical use. Tailoring suitable drug delivery systems for carrying curcumin improves its pharmaceutical and pharmacological effects. This review summarizes the most recent reported curcumin-loaded delivery systems for wound healing purposes, chiefly hydrogels, films, wafers, and sponges. In addition, curcumin nanoformulations such as nanohydrogels, nanoparticles and nanofibers are also presented, which offer better solubility, bioavailability, and sustained release to augment curcumin wound healing effects through stimulating the different healing phases by the aid of the small carrier.

Delivery of Bioactive Albumin from Multi-Functional Polyampholyte Hydrogels

Tissue engineered scaffolds are currently being explored to aid in healing and regeneration of non-union fractures in bone. Additionally, albumin has been demonstrated to provide benefits to healing when applied to injury sites. This paper focuses on delivery of calcium modified, bioactive bovine serum albumin (BSA) from a multi-functional polyampholyte polymer scaffold. First, the inherent nonfouling and conjugation properties of the polyampholyte hydrogel were verified to determine the impact of calcium exposure. The polyampholyte hydrogel delivery platform was then assessed with calcium titrations and osteoblast-like cell (MC3T3-E1) adhesion, proliferation, and viability evaluations. Finally, integrin inhibitors were used to identify the binding mechanisms that mediate cell adhesion to the calcium-modified BSA-conjugated hydrogels. An increase in cell adhesion was observed following calcium exposure up to 0.075 M, although this and higher calcium concentrations affected hydrogel stability and cell growth. BSA exposed to 0.05 M calcium and delivered from polyampholyte hydrogels promoted the most promising viable cell adhesion over 7 days. Cell adhesion to the calcium-modified BSA-conjugated hydrogels appeared to be regulated by arginine-glycine-aspartic acid (RGD) and collagen specific integrins. These results demonstrate that the delivery of calcium modified BSA from an implantable polymer scaffold is promising for bone tissue engineering applications.

Improving Biocompatibility of Polyester Fabrics through Polyurethane/Gelatin Complex Coating for Potential Vascular Application

Medical apparatus and instruments, such as vascular grafts, are first exposed to blood when they are implanted. Therefore, blood compatibility is considered to be the critical issue when constructing a vascular graft. In this regard, the coating method is verified to be an effective and simple approach to improve the blood compatibility as well as prevent the grafts from blood leakage. In this study, polyester fabric is chosen as the substrate to provide excellent mechanical properties while a coating layer of polyurethane is introduced to prevent the blood leakage. Furthermore, gelatin is coated on the substrate to mimic the native extracellular matrix together with the improvement of biocompatibility. XPS and FTIR analysis are performed for elemental and group analysis to determine the successful coating of polyurethane and gelatin on the polyester fabrics. In terms of blood compatibility, hemolysis and platelet adhesion are measured to investigate the anticoagulation performance. In vitro cell experiments also indicate that endothelial cells show good proliferation and morphology on the polyester fabric modified with such coating layers. Taken together, such polyester fabric coated with polyurethane and gelatin layers would have a promising potential in constructing vascular grafts with expected blood compatibility and biocompatibility without destroying the basic mechanical requirements for vascular applications.

Hydrogen-bonded lipase-hydrogel microspheres for esterification application

Lipase is the most widely used enzyme in industry. Due to its unique "lid" structure, lipase can only show high activity at the oil-water interface, which means that water is needed in the catalytic esterification process. However, the traditional lipase catalytic system cannot effectively control "micro-water" in the esterification environment, resulting in the high content of free water, which hinders the esterification reaction and reduces the yield. In this paper, a promising strategy of esterification catalyzed by polyacrylamide hydrogel immobilized lipase is reported. The porous polyacrylamide hydrogel microspheres (PHM) prepared by inverse emulsion polymerization are used as carrier to adsorb lipase by hydrogen bonding interaction. These hydrogel microspheres provide a "micro-water environment" for lipase in the anhydrous reaction system, and further provide an oil-water interface for "interface activation" of lipase. The obtained lipase-porous polyacrylamide hydrogel microspheres (L-PHMs) exhibit higher temperature and pH stability compared with free lipase, and the optimum enzymatic activity reach 1350 U/g (pH 6, 40 °C). L-PHMs can still remain about 49% of their original activity after 20 reuses. Furthermore, L-PHMs have been successfully applied to catalyze the synthesis of conjugated linoleic acid ethyl ester. The results suggest that this immobilization method opens up a new way for the application of lipase in ester synthesis.

Assessment of the performance of nonfouling polymer hydrogels utilizing citizen scientists

To facilitate longer duration space travel, flight crew sickness and disease transmission amongst the crew must be eliminated. High contact surfaces within space vehicles provide an opportunity for bacterial adhesion, which can lead to biofilm formation or disease transmission. This study evaluates the performance of several nonfouling polymers using citizen science, to identify the best performing chemistry for future applications as bacteria resistant coatings. The specific polymer chemistries tested were zwitterionic sulfobetaine methacrylate (SBMA), and polyampholytes composed of [2-(acryloyloxy)ethyl] trimethylammonium chloride and 2-carboxyethyl acrylate (TMA/CAA), or TMA and 3-sulfopropyl methacrylate (TMA/SA). Each polymer chemistry is known to exhibit bacteria resistance, and this study provides a direct side-by-side comparison between the chemistries using a citizen science approach. Nearly 100 citizen scientists returned results comparing the performance of these polymers over repeat exposure to bacteria and 30 total days of growth. The results demonstrate that TMA/CAA polyampholyte hydrogels show the best long-term resistance to bacteria adhesion.

Nanogels: A novel approach in antimicrobial delivery systems and antimicrobial coatings

The implementation of nanotechnology to develop efficient antimicrobial systems has a significant impact on the prospects of the biomedical field. Nanogels are soft polymeric particles with an internally cross-linked structure, which behave as hydrogels and can be reversibly hydrated/dehydrated (swollen/shrunken) by the dispersing solvent and external stimuli. Their excellent properties, such as biocompatibility, colloidal stability, high water content, desirable mechanical properties, tunable chemical functionalities, and interior gel-like network for the incorporation of biomolecules, make them fascinating in the field of biological/biomedical applications. In this review, various approaches will be discussed and compared to the newly developed nanogel technology in terms of efficiency and applicability for determining their potential role in combating infections in the biomedical area including implant-associated infections.

A review of polyampholytic ion scavengers for toxic metal ion removal from aqueous systems

Pollution by heavy metal ions in aqueous systems gained researchers attention gradually. Toxic metal ions were always present in the environment and the living organisms could get used to specific concentrations of contaminants with given time, however, sudden concentration rise we are observing can make it impossible for the living organisms to adapt. Many ion removal technologies were developed and optimised over the years to cope with this problem, including chemical precipitation, adsorption, membrane filtration and ion-exchange. Adsorption and ion exchange are processes that employ certain materials, that can be collectively named ion scavengers, to remove ions from aqueous solutions. Some of the scavenger materials are still barely studied, in particular polyampholytes - polymeric zwitterionic materials. This review showcases papers published on toxic metal ion removal by polyampholytes, both commercial and experimental, over last two decades. Many recent publications show promising properties of experimental materials that match or even outperform commercial scavengers. This review was prepared to encourage other researchers to investigate this broad and still not well-studied class of materials especially in context of their ion-scavenging properties. Polyamphytes which may be especially worth the attention and further research have been highlighted as literature studies show that the most unexplored materials in the class of polyamphytes are those containing aminomethylphosphonate, aminomethylsulfonate or hypophosphorous acid group.

Synthesis of a zwitterionic N-Ser-Ser-C dimethacrylate cross-linker and evaluation in polyampholyte hydrogels

Polyampholyte hydrogels are attractive materials for tissue engineering scaffolds as they offer a wide variety of features including nonfouling, selective protein delivery, and tunable physical characteristics. However, to improve the potential performance of these materials for in vivo applications, there is a need for a higher diversity of zwitterionic cross-linker species to replace commonly used ethylene glycol (EG) based chemistries. Towards this end, the synthesis of a dipeptide based zwitterionic cross-linker, N-Ser-Ser-C dimethacrylate (S-S) from N-Boc-l-serine is presented. The strategy utilized a convergent coupling of methacrylated serine partners followed by careful global deprotection to yield the zwitterionic cross-linker with good overall yields. This novel cross-linker was incorporated into a polyampholyte hydrogel and its physical properties and biocompatibility were compared against a polyampholyte hydrogel synthesized with an EG-based cross-linker. The S-S cross-linked hydrogel demonstrated excellent nonfouling performance, while promoting enhanced cellular adhesion to fibrinogen delivered from the hydrogel. Therefore, the results suggest that the S-S cross-linker will demonstrate superior future performance for in vivo applications.

Antitumor Effects of Self-Assembling Peptide-Emodin in situ Hydrogels in vitro and in vivo

PURPOSE

To study the in vitro and in vivo antitumor effects of the colloidal suspension-in situ hydrogel of emodin (EM) constructed with the self-assembling peptide RADA16-I and systematically evaluate the feasibility of the delivery system.

METHODS

The MTT and colony-formation assays were used to determine the viability of normal cells NCTC 1469 and tumor cells Hepa1-6. The uptake of EM in the RADA16-I-EM in situ hydrogel by tumor cells was analyzed by laser confocal microscope and flow cytometry. Flow cytometry was used to detect the cell apoptosis and cell cycle distribution. Transwell assay was used to detect the migration and invasion of tumor cells. The antitumor efficacy of the RADA16-I-EM in situ hydrogel and its toxic effects was further assessed in vivo on Hepa1-6 tumor-bearing C57 mice.

RESULTS

The results showed that the RADA16-I-EM in situ hydrogels could obviously reduce the toxicity of EM to normal cells and the survival of tumor cells. The uptake of EM by the cells from the hydrogels was obviously increased and could significantly induce apoptosis and arrest cell cycle in the G2/M phase, and reduce the migration, invasion and clone-formation ability of the cells. The RADA16-I-EM in situ hydrogel could also effectively inhibit the tumor growth and obviously decrease the toxic effects of EM on normal tissues in vivo.

CONCLUSION

Our results demonstrated that RADA16-I has the potential to be a carrier for the hydrophobic drug EM and can effectively improve the delivery of hydrophobic antitumor drugs with enhanced antitumor effects and reduced toxic effects of the drugs on normal cells and tissues.