Microwave Hydrothermally Synthesized Metal-Organic Framework-5 Derived C-doped ZnO with Enhanced Photocatalytic Degradation of Rhodamine B

Hydrothermal ZnO Nanomaterials: Tailored Properties and Infinite Possibilities

This review presents a comprehensive and precise summary of the hydrothermal synthesis and morphology control of zinc oxide (ZnO) nanomaterials, the advantages of hydrothermal synthesis, and the wide range of applications. ZnO nanomaterials have garnered significant attention in recent years for their diverse applications across various industries owing to their unique properties and versatility, with practical applications in healthcare, cosmetics, textiles, automotive, and other sectors. Specifically, the ability of ZnO-based nanomaterials to promote the production of reactive oxygen species, release of Zn2+ ions, and induce cell apoptosis makes them well-suited for bio-medicinal applications such as cancer treatment and microorganism control. Hydrothermal technique offers precise control over the synthesis of ZnO, metal/non-metal-doped ZnO, and related composites, enabling the tailoring of properties for specific applications. The significant feature of the hydrothermal technique is the use of water as a solvent, which is cheap, available, and environmentally benign. In the last section, we discussed the potential future direction of ZnO-based research.

Research Advances in Natural Polymers for Environmental Remediation

The search for sustainable and efficient remediation techniques is required to control increasing environmental pollution caused by synthetic dyes, heavy metal ions, and other harmful pollutants. From this point of view, natural polymers like chitosan, cellulose, lignin, and pectin have been found highly promising due to their biodegradability, availability, and possibility of chemical functionalization. Natural polymers possess inherent adsorption properties that can be further enhanced by cross-linking and surface activation. This review discusses the main properties, adsorption mechanisms, and functional groups such as hydroxyl, carboxyl, and amino groups responsible for pollutant sequestration. The paper also emphasizes the effectiveness of natural polymers in removing heavy metals and dyes from wastewater and discusses recent advances in polymer modifications, including ionic crosslinking and grafting. This study underlines the ecological potential of natural polymer-based adsorbents in the treatment of wastewater and the protection of the environment as a sustainable solution to pollution challenges.

Revolutionizing environmental cleanup: the evolution of MOFs as catalysts for pollution remediation

The global problem of ecological safety and public health necessitates, the development of new sustainable ideas for pollution remediation. In recent development, metal-organic frameworks (MOF) are the emerging technology with remarkable potential, which have been employed in environmental remediation. MOFs are networks that are created by the coordination of metals or polyanions with ligands and contain organic components that can be customized. The interesting features of MOFs are a large surface area, tuneable porosity, functional diversity, and high predictability of pollutant adsorption, catalysis, and degradation. It is a solid material that occupies a unique position in the war against environmental pollutants. One of the main benefits of MOFs is that they exhibit selective adsorption of a wide range of pollutants, including heavy metals, organics, greenhouse gases, water and soil. Only particles with the right combination of pore size and chemical composition will achieve this selectivity, derived from the high level of specificity. Besides, they possess high catalytic ability for the removal of pollutants by means of different methods such as photocatalysis, Fenton-like reactions, and oxidative degradation. By generating mobile active sites within the framework of MOFs, we can not only ensure high affinity for pollutants but also effective transformation of toxic chemicals into less harmful or even inert end products. However, the long-term stability of MOFs is becoming more important as eco-friendly parts are replaced with those that can be used repeatedly, and systems based on MOFs that can remove pollutants in more than one way are fabricated. MOFs can reduce waste production, energy consumption as compared to the other removal process. With its endless capacities, MOF technology brings a solution to the environmental cleansing problem, working as a flexible problem solver from one field to another. The investigation of MOF synthesis and principles will allow researchers to fully understand the potential of MOFs in environmental problem solving, making the world a better place for all of us.

Catalytic Advantages of SO3H-Modified UiO-66(Zr) Materials Obtained via Microwave Synthesis in Friedel-Crafts Acylation Reaction

The catalytic activity and stability of sulfonic-based UiO-66(Zr) materials were tested in the Friedel-Crafts acylation of anisole with acetic anhydride. The materials were prepared using microwave-assisted synthesis, producing microporous materials with remarkable crystallinity and physicochemical features as acid catalysts. Different ratios between both organic ligands, terephthalic acid (H2BDC) and monosodium 2-sulfoterephthalic acid (H2BDC-SO3Na), were used for the synthesis to modulate the sulfonic content. The sulfonic-based UiO-66(Zr) material synthesized with a H2BDC/H2BDC-SO3Na molar ratio of 40/60 exhibited the best catalytic performance in the acidic-catalyzed Friedel-Crafts acylation reaction. This ratio balanced the number of sulfonic acid sites and their accessibility within the UiO-66 microporous structure. The catalytic performance of this material increased remarkably at 200 °C, outperforming reference acids and commercial heterogeneous catalysts such as Nafion-SAC-13 and Amberlyst-70. Additionally, the best sulfonic-based UiO-66(Zr) material proved to be stable in four successive reaction cycles, maintaining both its catalytic activity and its structural integrity.

Novel photo and bio-active greyish-black cotton fabric through air- and nitrogen- carbonized zinc-based MOF for developing durable functional textiles

This study explores the potential of using the carbonization of Zn-based metal-organic frameworks (Zn-MOF-5) under N2 and air to modify zinc oxide (ZnO) nanoparticle for the production of various photo and bio-active greyish-black cotton fabrics. The MOF-derived ZnO under N2 demonstrated a significantly higher specific surface area (259 m2g-1) compared to ZnO (12 m2g-1) and MOF-derived ZnO under air (41.6 m2 g-1). The products were characterized using various techniques, including FTIR, XRD, XPS, FE-SEM, TEM, HRTEM, TGA, DLS, and EDS. The tensile strength and dye degradation properties of the treated fabrics were also investigated. The results indicate that the high dye degradation capability of MOF-derived ZnO under N2 is likely due to the lower ZnO band gap energy and improvement in electron-hole pair stability. Additionally, the antibacterial activities of the treated fabrics against Staphylococcus and Pseudomonas aeruginosa were investigated. The cytotoxicity of the fabrics was studied on human fibroblast cell lines using an MTT assay. The study findings demonstrate that the cotton fabric covered with carbonized Zn-MOF under N2 is human-cell compatible while showing high antibacterial activities and stability against washing, highlighting its potential for use in developing functional textiles with enhanced properties.

Construction of Waste Chalk Powder into mpg-C3N4-CaSO4 as an Efficient Photocatalyst for Dye Degradation under UV-Vis Light and Sunlight

In this article, we present the synthesis of calcium sulfate nanoparticles (CaSO₄ NPs) from waste chalk powder by the calcination method. These CaSO₄ NPs were utilized for the construction of a mesoporous graphitic carbon nitride-calcium sulfate (mpg-C₃N₄-CaSO₄) photocatalyst. Synthesized materials were confirmed by several characterization techniques. The photocatalytic performance of the synthesized samples was tested by the degradation of methylene blue (MB) in the presence of both UV-vis light and sunlight. The efficiency of photocatalytic degradation of MB dye using the optimized mpg-C₃N₄-CaSO₄-2 composite reached 91% within 90 min in the presence of UV-vis light with superb photostability and recyclability after five runs compared to individual mpg-C₃N₄ and CaSO₄ NPs and reached 95% within 120 min under sunlight. Histotoxicological studies on fish liver and ovary indicated that the dye containing the solution damaged the structure of the liver and ovary tissues, whereas the photodegraded solution of MB was found to be less toxic and caused negligible alterations in their typical structure similar to the control group.

Construction of hierarchically porous metal-organic framework HP-UiO-66-30% for sensitive determination of benzoylurea insecticides

Due to widespread application of benzoylurea insecticides (BUs) and its persistence in environment, the effective capture of benzoylurea insecticides residues in environment is an important issue of environmental safety monitoring. To obtain excellent adsorption performance, creating defective structure in metal-organic frameworks (MOFs) can be employed as the method for adjusting its properties. Zirconium(Ⅳ)-based MOF termed as UiO-66-30% was constructed with 2-aminoterephthalic acid (NH₂-BDC) and terephthalic acid (H₂BDC) as building blocks. After calcination and removal of thermal-sensitive ligand (NH₂-BDC), hierarchically porous UiO-66-30% (HP-UiO-66-30%) with multistage pore structure and good stability was obtained. The unique structure of HP-UiO-66-30% endowed it to achieve instantaneous equilibrium (within 2 min) when it was used as a dispersed solid phase extraction (d-SPE) adsorbent to extract BUs from environmental samples, greatly reducing the operation time. A wide linear range (0.05-200 ng mL^-1), good linearity (R² ≥ 0.9980), low detection limits (0.01-0.03 ng mL^-1) and quantification limits (0.05-0.1 ng mL^-1) were obtained for BUs. In addition, the HP-UiO-66-30% material possessed the good reusability and the adsorption capacity did not change significantly over 16 adsorption-desorption cycles. Finally, the established dispersed solid phase extraction-high performance liquid chromatography-diode array detector (d-SPE-HPLC-DAD) method was successfully applied to determination of BUs residues in environmental soil samples. The results demonstrated that HP-UiO-66-30% was an excellent sorbent for extraction BUs from environmental samples.

How Effective are Metal Nanotherapeutic Platforms Against Bacterial Infections? A Comprehensive Review of Literature

The emergence of multidrug-resistant bacteria has been deemed a global crisis that affects humans worldwide. Novel anti-infection strategies are desperately needed because of the limitations of conventional antibiotics. However, the increasing gap between clinical demand and antimicrobial treatment innovation, as well as the membrane permeability obstacle especially in gram-negative bacteria fearfully restrict the reformation of antibacterial strategy. Metal-organic frameworks (MOFs) have the advantages of adjustable apertures, high drug-loading rates, tailorable structures, and superior biocompatibilities, enabling their utilization as drug delivery carriers in biotherapy applications. Additionally, the metal elements in MOFs are usually bactericidal. This article provides a review of the state-of-The-art design, the underlying antibacterial mechanisms and antibacterial applications of MOF- and MOF-based drug-loading materials. In addition, the existing problems and future perspectives of MOF- and MOF-based drug-loading materials are also discussed.

Insights into High-Performance and Selective Elimination of Cationic Dye from Multicomponent Systems by Using Fe-Based Metal-Organic Frameworks

Metal-organic frameworks (MOFs), especially Fe-MOFs, have shown prospective application in eliminating organic dyes from wastewater due to their well-developed pores, water stability, easy preparation, and economy. Herein, we synthesized four types of Fe-MOFs (such as MIL-88A, MIL-88B, MIL-100, and MIL-101) using the hydrothermal method. The products were analyzed with several methods. By comparing the adsorption effect of those four types of Fe-MOFs on three kinds of dyes, it has been shown that MIL-100 owns the best adsorption efficiency on cationic organic dyes methylene blue (MB) and Rhodamine B (RhB) in 180 min, while all MOFs have slight removal capacity on methyl orange (MO). MIL-100, as an adsorbent, was studied under various research conditions, and the maximum removal efficiencies to MB, RhB, and MO were found to be up to 97.36%, 88.75%, and 13.00%, respectively. Furthermore, cationic dye MB's removal by MIL-100 was fitted with a pseudo-second-order model and Langmuir isotherm model (Q_m = 411.041 mg/g) by adsorption kinetics and isotherms research, and MIL-100 could rapidly and selectively divide MB from a binary complex aqueous solution of MB and MO. The as-fabricated MIL-100 also exhibited excellent recyclability after four adsorption-desorption recycles and can be treated as a potential substance with high removal efficiency of cationic organic dye-containing industrial effluents.

Dye Removal Ability of Pure and Doped Graphitic Carbon Nitride

Background:

Rapid escalation in textile, paper, pesticides, pharmaceuticals and several other chemical based manufacturing industries due to amplification in human requirements have proportionately contributed to the extreme contamination of water ecosystem, resulted from the discharge of toxic pollutants from industries. Effluents from textile industries are comprised of coloured dyes like Rhodamine B, Methyl Orange, Methylene Blue and phenolic compounds which deserve special mention owing to their non-biodegradable, carcinogenic and severe detrimental nature. Urgent needs to ameliorate this fast declining environmental situation are of immense necessity in current scenario.

Objectives:

Objectives: In this regard, graphitic carbon nitride (GCN) is a distinguished material for water purification-based applications because of its exclusive characteristics making it highly prospective for degradation of toxic dyes from water by catalysis and adsorption techniques. GCN has been a material of conspicuous interest in recent times owing to its two dimensional sheets like structure with favourable surface area, and cost-effective synthesis approaches along with high production yield. This article presents a detail study of different aspects of GCN as a material of potential for water purification. Through extensive literature survey it has been shown that GCN is an effective material to be used in the fields of application. Several effective procedures like catalysis or adsorption for removal of dyes from water have been discussed with their basic science behind.

Conclusions:

This systematic effort shows that GCN can be considered to be one of the most efficient water purifier with further advantages arising from its easy and cost effective large scale synthesis.

Black Talc-Based TiO2/ZnO Composite for Enhanced UV-Vis Photocatalysis Performance

Herein, using black talc as a carrier, a ternary black talc-TiO₂/ZnO composite photocatalyst was prepared by the sol-gel method, and the effect of the black talc on the hetero-structure properties of the TiO₂ and ZnO was systematically studied. The prepared composite photocatalyst showed an excellent degradation performance of the pollutant, where black talc plays an important role in promoting the interface interaction by enhancing the contact area between the TiO₂ and ZnO. Moreover, the free carbon element doping in black talc favors the formation of more oxygen vacancies, thereby improving the response as a photocatalyst in visible light. In addition, the carbon in the black talc can also adsorb organic pollutants and enrich the surroundings of the photocatalyst with pollutants, so it further improves the catalytic efficiency of the photocatalyst. Under UV irradiation, the degradation rate of Rhodamine B on black talc-TiO₂/ZnO was found 3.3 times higher than that of black talc-TiO₂ with good stability.

ZnCDs/ZnO@ZIF-8 Zeolite Composites for the Photocatalytic Degradation of Tetracycline

Considering the photocatalytic performance of CDs, ZnO, and the unique porous nanostructure and stability of ZIF-8, we prepared ZnCDs/ZnO@ZIF-8 zeolite composites. The resultant material represented an enhanced ability for the photodegradation of TC compared with that of ZnCDs and ZnO. The photocatalytic degradation efficiency reached over 85%. The catalytic activity of the composites was maintained after four cycles. The experimental result indicated that ⋅O2 radical was the active species in the reaction.

Zinc Metal-Organic Framework Growing on the Surface of Fruit Peels and Its Photocatalytic Activity

The development of water treatment materials using environmentally friendly natural biomasses as substitutes plays an increasingly important role in environmental protection. Zeolitic imidazolate framework-8 (ZIF-8) is often used for the catalytic degradation of dye wastewater, but due to its small particle size, its disadvantage of easy agglomeration prevents it from being fully functional. Herein, we report an efficient method for synthesizing biomasses/ZIF-8 using four different fruit peels as carriers. ZIF-8 nanoparticles are in-situ grown uniformly on their surface. The Brunauer-Emmett-Teller surface area of shaddock peel/ZIF-8 was found to be 752.15 m²g^-1. After catalytic activity comparison, the loose shaddock peel/ZIF-8 showed the fastest and most significant degradation efficiency of 94% in methylene blue aqueous solution and could be used multiple times through a simple washing process.

Metal organic framework-derived C-doped ZnO/TiO2 nanocomposite catalysts for enhanced photodegradation of Rhodamine B

A series of C-doped ZnO/TiO₂ composites with various molar ratios of ZnO to TiO₂ were synthesized by one-step controllable pyrolysis of Zn/Ti bimetallic metal-organic frameworks (Zn/Ti-MOF). The Zn/Ti-MOF was prepared using a facile microwave hydrothermal method. Electron microscopic analysis proved that the composites presented regularity cubic morphology with an edge length of about 1 μm and the C atoms were successfully doped into ZnO/TiO₂ composites. X-ray photoelectron spectroscopy (XPS) measurement results confirmed the C-doping in the ZnO/TiO_2. Comparative experimental studies showed that 2% ZnO/TiO₂ composites prepared with the calcination temperature of 600℃ displayed the best photocatalytic degradation efficiency (94%) of RhB under the simulated sunlight irradiation. Cyclical experiment indicated the high stability and reusability of 2% ZnO/TiO₂ composites. Electron spin resonance (ESR) and trapping experiments illustrated that the produced O₂^- served as the main active species for the efficient RhB removal. This work provides an efficient way for preparing C-doped bimetal oxides composites, which would have an important application prospect in the photocatalytic degradation of organic pollutants in environmental water.