Carboxymethyl Chitosan-Modified Graphene Oxide as a Multifunctional Vector for Deltamethrin Delivery and pH-Responsive Controlled Release, Enhanced Leaf Affinity, and Improved Mosquito-Killing Activity

An Iron-Based Metal-Organic Framework as Nanocarrier for Lambda-Cyhalothrin Delivery: pH-Responsive Controlled Release, Enhanced Leaf Adhesion, and Prolonged Duration Period against Culex pipiens pallens

Lambda-Cyhalothrin (LC) is a high-efficiency and broad-spectrum insecticide. However, due to its poor water dispersion stability and unstable efficacy, it has many problems in practical applications. Therefore, there is an urgent need to develop new formulations with stability, low toxicity, and environmental friendliness to overcome the drawbacks of traditional pesticide formulations. This study designed an iron-based metal-organic framework (MIL-101(Fe)) as a nanocarrier for the loading of LC and then surface modified it with polydopamine (PDA) to form the nanopesticide PDA-LC-MIL. The results showed that PDA-LC-MIL has good stability and can achieve controlled release of pesticide by adjusting the pH value. In addition, it also has a good leaf affinity and can effectively adhere on crop leaves, improving the utilization rate of pesticides. The insecticidal experimental results indicate that PDA-LC-MIL has significantly improved sustained insecticidal activity. PDA-LC-MIL also has good biocompatibility and shows no significant inhibitory effect on seed germination and seedling growth of Vigna radiata (L.) Wilczek and maize. Therefore, we firmly believe that MIL-based nanopesticides will have broad application prospects in the field of green pesticides and modern agriculture.

Graphene oxide enhances aphid resistance in sorghum via the miR319-SbTCP7-SbLOX3 Pathway

The aphid (Melanaphis sacchari) has emerged as a formidable pest, devastating sorghum plants and highlighting the need for sustainable management strategies. Graphene oxide (GO), as a novel material, has garnered attention for its use in crop cultivation and management, but its effects on biotic stresses remain elusive. Here, we used 10 mg/L GO to spray aphid-stressed sorghum seedlings four times in total. GO exposure reduced 50% H2O2 from the reactive oxygen species (ROS) burst induced by the aphid. Further analysis revealed that GO within the cells acts as a nanozyme, mimicking and enhancing the catalytic activity of the ROS-scavenging system to maintain ROS homeostasis, protecting normal plant growth and development under aphid stress. Moreover, the moderate increase in H2O2 in GO-treated, aphid-infected seedlings blocked the biogenesis of miR319, leading to the induction of its target gene SbTCP7, which in turn activated the transcription of SbLOX3, a rate-limiting enzyme in jasmonic acid (JA) biosynthesis. Subsequent molecular and genetic assays confirmed that the miR319-SbTCP7 module enhances JA metabolism, promoting the accumulation of JA and its active derivative jasmonic acid-isoleucine (JA-Ile) to combat aphids. Our results suggest that GO, as a potential nanozyme, enhances the aphid resistance of sorghum through the miR319-SbTCP7 module to regulate JA synthesis, indicating a novel cultivation strategy for improving pest management via nanomaterials. This frontier research has opened new avenues for crop protection against invasive pests like aphids.

Degradable mesoporous organosilicon nanoparticles coated with chitosan-Cu2+ complexes with dual stimulus-response for efficient prochloraz delivery

Accurate pesticide application enhances efficiency, reduces usage and minimizes environmental risks. This study employed amino-functionalized degradable mesoporous organosilicon nanoparticles (DMON-N) as a carrier, with chitosan (CS) acting as a capping agent. Chemical cross-linking of CS with Cu2+ through chelation promotes the formation of Cu2+-CS complexes. A pH/redox dual-responsive prochloraz (PRO) delivery system (Cu-CS@PRO-DMON, CCPD) was constructed and evaluated for its potential application in controlling rice sheath blight. The successful preparation of CCPD was confirmed through a series of physicochemical characterizations. The findings demonstrated that CCPD exhibited a high PRO loading capacity (29.09 %) and that PRO could be released from CCPD for an extended duration (up to 144 h) under the influence of acidity and glutathione promotion. Furthermore, CCPD demonstrated excellent wettability (measured contact angle: 63.52 ± 0.42°), adhesion (23.83 ± 2.59 mg/cm2) and resistance to rainfall washout on rice leaves. CCPD demonstrated superior antimicrobial efficacy to prochloraz technical (PRO TC) material and prochloraz emulsion in water (PRO EW). The biosafety assessment revealed that CCPD exhibited minimal acute toxicity to zebrafish, no discernible toxicological effects on human bronchial epithelial cells and no notable impact on rice.

Fostering rehydration and facilitating bioactive release through cellulose-assisted leaf surface treatment

Glyphosate is a widely used herbicide in weed control and crop protection. However, its low bioavailability on leaf surfaces of weeds led to excessive use of glyphosate, inducing herbicide-resistant development and major sustainable agricultural and environmental concerns. This study addresses these challenges by developing cellulose-assisted glyphosate formulations using superior rehydration and sustainable release capability of nanocelluloses. We prepared glyphosate-loaded nanocellulose particles (CNP) and cellulose nanofibers (CNF) to enhance the rehydration and sustained release of glyphosate on leaf surfaces. Our results have demonstrated that nanocelluloses significantly improved water capture on the leaf surface and gradual release of glyphosate, with CNP and CNF formulations showing an 8.75-fold increase in water adsorption on cotton leaves compared to the control group over 12 h. Furthermore, incorporating an inorganic salt improved moisture adsorption efficiency. The formulations exhibited high compatibility with existing spray technologies, offering substantial economic and environmental benefits for agriculture practices. This approach highlights the potential application of polysaccharides in revolutionizing agrochemical applications and environmental sustainability, providing great potential in agricultural spraying practices.

Chitosan-based insecticide formulations for insect pest control management: A review of current trends and challenges

Future agricultural practices necessitate green alternatives to replace hazardous insecticides while distinguishing between pests and beneficial insects. Chitosan, as a biological macromolecule derived from chitin, is biodegradable and exhibits low toxicity to non-target organisms, making it a sustainable alternative to synthetic pesticides. This review identifies chitosan-derivatives for insecticidal activity and highlights its efficacy including genotoxicity, defense mechanism, and disruption of insect's exoskeleton at different concentrations against several insect pests. Similarly, synergistic effects of chitosan in combination with natural extracts, essential oils, and plant-derived compounds, enhances insecticidal action against various pests was evaluated. The chitosan-based insecticide formulations (CHIF) in the form of emulsions, microcapsules, and nanoparticles showed efficient insecticide action on the targeted pests with less environmental impact. The current challenges associated with the field-trial application were also recognized, by optimizing potent CHIF-formulation parameters, scaling-up process, and regulatory hurdles addressed alongside potential solutions. These findings will provide insight into achieving the EU mission of reducing chemical pesticides by 50 %.

Nanomaterials and Nanotechnology in Agricultural Pesticide Delivery: A Review

Pesticides play a crucial role in ensuring food production and food security. Conventional pesticide formulations can not meet the current needs of social and economic development, and they also can not meet the requirements of green agriculture. Therefore, there is an urgent need to develop efficient, stable, safe, and environmentally friendly pesticide formulations to gradually replace old formulations which have high pollution and low efficacy. The rise of nanotechnology provides new possibilities for innovation in pesticide formulations. Through reasonable design and construction of an environmentally friendly pesticide delivery system (PDS) based on multifunctional nanocarriers, the drawbacks of conventional pesticides can be effectively solved, realizing a water-based, nanosized, targeted, efficient, and safe pesticide system. In the past five years, researchers in chemistry, materials science, botany, entomology, plant protection, and other fields are paying close attention to the research of nanomaterials based PDSs and nanopesticide formulations and have made certain research achievements. These explorations provide useful references for promoting the innovation of nanopesticides and developing a new generation of green and environmentally friendly pesticide formulations. This Perspective summarizes the recent advances of nanomaterials in PDSs and nanopesticide innovation, aiming to provide useful guidance for carrier selection, surface engineering, controlled release conditions, and application in agriculture.

Graphene Oxide-Based Antifungal Pesticide Delivery System for Tobacco Fungal Disease (Tobacco Target Spot) Control

In recent years, nanocarrier-based pesticide delivery systems have provided new possibilities for the efficient utilization of pesticides. In this research, we developed a hydroxypropyl-β-cyclodextrin-modified graphene oxide (GO-HP-β-CD) nanocarrier for pyraclostrobin (Pyr) delivery and studied its application for tobacco target spot disease control. GO-HP-β-CD has excellent pesticide-loading performance for Pyr (adsorption capacity of 1562.5 mg/g) and good water dispersibility and stability. Besides, GO-HP-β-CD shows pH-responsive release performance. In addition, GO-HP-β-CD also has better leaf affinity than Pyr, and it can effectively adhere to the leaf surface after simulated washing. The results of antifungal experiments indicate that GO-HP-β-CD-Pyr has a good preventive effect on tobacco target spot disease, and its EC50 value is 0.384 mg/L, which is lower than Pyr. Specifically, this nanopesticide formulation does not contain toxic organic solvent or additive, so it has good environmental friendliness. Therefore, we believe that the GO-HP-β-CD-Pyr nanopesticide has brilliant potential in the prevention and control of tobacco diseases.

Fabrication of zein-coated brush-like silica nanocarriers for high foliage deposition and responsive release of pesticide

Responsive release systems have received extensive attention to enhance pesticide utilization efficiency and reduce environmental pollution. In this study, pH/GSH dual responsive release system based on brush-like silica (bSiO2) carriers was constructed to enhance the utilization of pesticides. The bSiO2 carriers present core-shell structure, length of 550 nm, diameter of 350 nm and shell thickness of 100 nm. The carrier had a high pesticide loading (20.0 %, w/w) for dinotefuran (Din). After loading Din, zein was covalently linked with cysteine-bridge to seal the loaded pesticides (namely Din@bSiO2@Zein). The Din@bSiO2@Zein exhibited superior foliar affinity, retention and photostability, and retention rate still remain above 95 % with 220 min UV irradiation. Din@bSiO2@Zein displayed pH/GSH responsive release and the cumulative release within 92 h was up to 81 % under pH=9/CGSH=6 mM, mimicking the microenvironment of lepidopteran. The Din@bSiO2@Zein possessed good control efficacy against Plutella xylostella. Appreciably, Din@bSiO2@Zein could be transported bi-directionally to various regions of tobacco plants within 24 h, which had potential to promote pesticide efficacy. This work offers a strategy to minimize the pesticide dosage and encourage sustainable agricultural development.

Preparation and characterization of ternary polysaccharide hydrogels based on carboxymethyl cellulose, carboxymethyl chitosan, and carboxymethyl β-cyclodextrin

A series of ternary polysaccharide hydrogels were facile prepared by incorporating carboxymethyl cellulose (CMC) into the carboxymethyl chitosan/carboxymethyl β-cyclodextrin (CMCS/CMCD) complex solution based on multiple physical interactions. Structure properties of the CMC/CMCS/CMCD hydrogels were revealed by FTIR, XRD, SEM, and TG. The rheological and texture properties, temperature/pH-response behaviors, biocompatablity, and antimicrobial activity of the hydrogels were determined in detail. These results showed that the existence of electron force and hydrogen bond among three components leading to formation of the hydrogels, displaying good mechanical characteristic, stable solid-like rheological properties, controllable swelling and degradation behaviors, and excellent biocompatibility. Additionally, the swelling kinetics can be well described by the Schott's pseudo second order model. Moreover, the hydrogels loaded with cinnamic acid (CA) exhibited good antimicrobial activity against both Staphylococcus aureus and Escherichia coli, and the antimicrobial activity was related to the composition of the prepared hydrogels. The novel ternary polysaccharide hydrogels may have good application prospects in food and bio-medicine.

Redox/Near-Infrared Dual-Responsive Hollow Mesoporous Organosilica Nanoparticles for Pesticide Smart Delivery

Extremely inefficient utilization of pesticides has prompted a study of low-cost, sustainable, and smart application systems. Herein, as a promising pesticide nanocarrier, hollow mesoporous organosilica nanoparticles (HMONs) were first synthesized by using inexpensive CaCO3 nanoparticles as the hollow templates. A redox/near-infrared light dual-triggered pesticide release system was further achieved via loading avermectin (AVM) into the HMONs and coating a layer of polydopamine (PDA). The as-prepared AVM@HMONs@PDA displays a favorable pesticide load capability (24.8 wt %), outstanding photothermal performance, and high adhesion to leaves. In addition, with glutathione (GSH), the AVM cumulative release from AVM@HMONs@PDA was 3.5 times higher than that without GSH. Under ultraviolet light irradiation, the half-life of AVM@HMONs@PDA was prolonged by 17.0-fold compared to that of the AVM technical. At day 21 after treatment in the insecticidal activity, the median lethal concentrations (LC50) values displayed that the toxicity of AVM@HMONs@PDA for Panonychus citri (McGregor) was enhanced 4.0-fold compared with the commercial emulsifiable concentrate. In the field trial, at day 28 after spraying, AVM@HMONs@PDA was significantly more control effective than AVM-EC in controlling the P. citri (McGregor), even at a 50% reduced dosage. Moreover, HMONs@PDA was safe for crops. This research presents a novel preparation approach for HMONs, and it also offers a promising nanoplatform for the precise release of pesticides.

Multifunctional Mesoporous Silica Nanosheets for Smart Pesticide Delivery and Enhancing Pesticide Deposition

A multifunctional nanopesticide delivery system is considered to be a novel and efficient tool for controlling pests in modern agriculture. In this study, a mesoporous silica nanosheet (H-MSN) carrier for intelligent delivery of pesticides was prepared by the sol-gel method. The prepared H-MSN carrier had obvious hexagonal flat structure, with a specific surface area of 759.9 m2/g, a transverse diameter of about 340 nm, a thickness of about 80 nm, and regular channels being perpendicular to the plane. Polyethylene glycol diacrylate (PEGDA) and sulfhydryl-modified polyethylenimide (PEI-SH) were used to block the insecticide after loading the insecticide imidacloprid (IMI). The introduction of hydrophilic PEI-SH/PEGDA greatly improved the leaf wettability and adhesion ability of H-MSN. The retention amount of IMI@H-MSN@PEI-SH/PEGDA on cucumber and cabbage leaves was up to 46.0 mg/cm2 and 19.0 mg/cm2, respectively. IMI@H-MSN@PEI-SH/PEGDA showed pH- and GSH-responsive release. Compared with pure IMI, IMI entrapped in MSN carriers has favorable biocompatibility and antiphotolytic properties.

Recent advances in stimuli-response mechanisms of nano-enabled controlled-release fertilizers and pesticides

Nanotechnology-enabled fertilizers and pesticides, especially those capable of releasing plant nutrients or pesticide active ingredients (AIs) in a controlled manner, can effectively enhance crop nutrition and protection while minimizing the environmental impacts of agricultural activities. Herein, we review the fundamentals and recent advances in nanofertilizers and nanopesticides with controlled-release properties, enabled by nanocarriers responsive to environmental and biological stimuli, including pH change, temperature, light, redox conditions, and the presence of enzymes. For pH-responsive nanocarriers, pH change can induce structural changes or degradation of the nanocarriers or cleave the bonding between nutrients/pesticide AIs and the nanocarriers. Similarly, temperature response typically involves structural changes in nanocarriers, and higher temperatures can accelerate the release by diffusion promoting or bond breaking. Photothermal materials enable responses to infrared light, and photolabile moieties (e.g., o-nitrobenzyl and azobenzene) are required for achieving ultraviolet light responses. Redox-responsive nanocarriers contain disulfide bonds or ferric iron, whereas enzyme-responsive nanocarriers typically contain the enzyme's substrate as a building block. For fabricating nanofertilizers, pH-responsive nanocarriers have been well explored, but only a few studies have reported temperature- and enzyme-responsive nanocarriers. In comparison, there have been more reports on nanopesticides, which are responsive to a range of stimuli, including many with dual- or triple-responsiveness. Nano-enabled controlled-release fertilizers and pesticides show tremendous potential for enhancing the utilization efficiency of nutrients and pesticide AIs. However, to expand their practical applications, future research should focus on optimizing their performance under realistic conditions, lowering costs, and addressing regulatory and public concerns over environmental and safety risks.

Using a Dynamic Hydrophilization Strategy to Achieve Nanodispersion, Full Wetting, and Precise Delivery of Hydrophobic Pesticide

Various strategies have been developed to improve the applicability of hydrophobic pesticides for better effectiveness in agriculture. However, existing formulations of hydrophobic pesticides still suffer from complicated processing, abused organic solvents, indispensable surfactants, or inescapable ecotoxicity, which strictly limit their applications. Herein, a dynamic covalent bond tailored pesticide (fipronil) amphiphile is constructed to address the above issues, which accomplishes the nanodispersion, full wetting, and precise delivery without organic solvents, surfactants, and materials simultaneously. By introducing a hydrophilic ligand on the hydrophobic fipronil through an imine bond, the cleavable fipronil amphiphile (FPP) exhibits superior water solubility and can even self-assemble into micelles at higher concentrations, which can be directly applied in powder form without organic solvents. Attributed to the suitable hydrophilic/hydrophobic ratio, FPP achieves full wetting and effective deposition on superhydrophobic rice leaves without surfactants. Moreover, benefiting from the unique dynamic nature of the imine bond, FPP maintains good storage stability while sensitively releasing back to fipronil under the humidity and pH trigger, consequently implementing the precise delivery for nontarget Apis cerana and target Chilo suppressalis without materials. To our knowledge, this dynamic covalent bond tailored amphiphile strategy is the first idea that simultaneously takes the dispersibility, wettability, and responsiveness of hydrophobic pesticides into account, providing a possibility to control the entire journey of field application and even promising to be incorporated into the synthesis process, thus paving the way for modern sustainable agriculture.

Carboxymethyl β-cyclodextrin grafted hollow copper sulfide@mesoporous silica carriers for stimuli-responsive pesticide delivery

Stimuli-responsive controlled release systems have received extensive attention to improve the pesticide bioavailability and minimize environmental pollution. Herein, a multiple stimuli-responsive IMI@HCuS@mSiO₂ @ -ss-CβCD delivery system was constructed using modified carboxymethyl β-cyclodextrin (CβCD-ss-COOH) as sealing materials, hollow copper sulfide nanoparticles with amino-functionalized mesoporous silica shell (HCuS@mSiO₂-NH₂) as carriers and imidacloprid (IMI) as the model drug. The cavity structure of HCuS@mSiO₂-NH₂ would provide a large space for pesticide loading. The results revealed that HCuS@mSiO₂-ss-CβCD was approximately 230 nm in size and the loading efficiency for IMI was 25.7%, and exhibited better biosafety on bacteria and seed. HCuS carriers were also served as photothermal agent and possessed high photothermal conversion effect (η = 38.4%). IMI@HCuS@mSiO₂ @ -ss-CβCD displayed excellent foliage adhesion and multiple stimuli-responsive release properties to pH, α-amylase, GSH, and NIR. The photostability of IMI embedded in CuS@mSiO₂ @ -ss-CβCD was approximately 10 times that of IMI solution. This work provides an efficient nanoplatform for realizing pesticide delivery.

Nano-based smart formulations: A potential solution to the hazardous effects of pesticide on the environment

Inefficient usage, overdose, and post-application losses of conventional pesticides have resulted in severe ecological and environmental issues, such as pesticide resistance, environmental contamination, and soil degradation. Advances in nano-based smart formulations are promising novel methods to decrease the hazardous impacts of pesticide on the environment. In light of the lack of a systematic and critical summary of these aspects, this work has been structured to critically assess the roles and specific mechanisms of smart nanoformulations (NFs) in mitigating the adverse impacts of pesticide on the environment, along with an evaluation of their final environmental fate, safety, and application prospects. Our study provides a novel perspective for a better understanding of the potential functions of smart NFs in reducing environmental pollution. Additionally, this study offers meaningful information for the safe and effective use of these nanoproducts in field applications in the near future.