Highly Efficient Removal of Lead/Cadmium by Phosphoric Acid-Modified Hydrochar Prepared from Fresh Banana Peels: Adsorption Mechanisms and Environmental Application

Adsorption of heavy metals by biochar in aqueous solution: A review

Heavy metal pollution (e.g., Cd, Hg, Pb, Cu, Ni, Zn, As and Cr) has become a crucial issue worldwide. Among various remediation strategies, adsorption is widely recognized for its environmental sustainability, cost-effectiveness, and operational simplicity. In this context, biochar has gained significant attention due to its promising adsorption performance. To systematically support adsorption studies, this review compiled essential models for adsorption experiments, including commonly used adsorption kinetics models, isotherm models, and thermodynamic analysis methods. Moreover, we systematically analyzed key factors affecting heavy metal adsorption by biochar, such as its physicochemical properties, environmental pH, temperature, initial concentration, dosage, and the presence of coexisting ions, to identify the conditions that govern adsorption capacity. In addition, the adsorption performance of biochar toward eight significant heavy metals is reviewed in detail, with a focus on elucidating the underlying mechanisms, including complexation, ion exchange, cation-π bonding, electrostatic interactions, and precipitation. Finally, based on identified research gaps and critical challenges, we discuss emerging research tools, including machine learning and advanced surface modifications, to guide the targeted design of biochar materials for enhanced adsorption capacity.

Develop Reusable Carbon Sub-Micrometer Composites with Record-High Cd(II) Removal Capacity

Cd(II)-induced pollution across diverse water bodies severely threatens ecosystems and human health. Nevertheless, achieving ultra-efficient and cost-effective treatment of trace amounts of heavy metals remains a major challenge. Herein, the novel carbon sub-micrometer composites (CSMCs) supported Fe0@γ-Fe2O3 core-shell clusters nanostructures are designed and synthesized through a series of universally applicable methods. Research data on adsorption behavior clearly revealed that resorcinol/formaldehyde 1.25-basic ferric acetate (RF-1.25BFA) and RF-1.25BFA-540 have surprising adsorption capacities. Employing the adsorbent dosage of 0.025 g L-1, the adsorption capacities for 10 mg L-1 Cd(II) reached 400.00 mg g-1 with ultrafast adsorption kinetics, alongside theoretical maximum adsorption capacities for Cd(II) of 1108.87 and 1065.06 mg g-1 using 0.025 g L-1 adsorbent, respectively, setting a new record-high level. Additionally, they demonstrated exceptional stability and reusability, maintaining Cd(II) removal efficiency above 95% even after 15 adsorption-desorption cycles. Importantly, this study is the first to unveil a new ultrafast successive two-step enrichment-hydrolysis adsorption mechanism for Cd(II) removal, emphasizing the critical role played by iron clusters nanostructures in constructing a high-alkalinity adsorption microenvironment on the surface of the materials. The findings reported pioneered a new avenue for the rational design of high-performance environmental remediation materials, aiming to overcome the limitations of traditional mine drainage treatment.

60Coγ activation of Cladophora rupestris biomass functional groups and its effect on Pb2+ adsorption

To investigate the modification of Pb2+ adsorption of the functional groups of Cladophora rupestris (C. rupestris) biomass by gamma radiation (60Coγ-ray), the interface structure, chemical properties, adsorption behaviors, and Pb2+ adsorption mechanisms of C. rupestris biomass were investigated after irradiation with varying doses of 60Coγ-ray. The results indicate that 60Coγ-ray significantly changed the surface characteristics and interfacial chemistry of the C. rupestris biomass.This led to fracturing and fragmentation that produced a larger specific surface area and more abundant pore structure, increasing the electronegativity in the C. rupestris biomass. The theoretical Pb2+ adsorption capacity increased significantly (2.6-2.9 times) after 60Coγ-ray irradiation. 60Coγ-ray caused preferential degradation of protein components in the dissolved organic matter of the C. rupestris biomass, and protein deamination increased the absorption sites of cations. In the C. rupestris biomass, 60Coγ-ray altered the elemental composition and functional groups, particularly the carbon- and oxygen-containing functional groups, to improve Pb2+ adsorption. In conclusion, 60Coγ-ray can activate the functional groups of C. rupestris biomass and improve their Pb2+ adsorption sites. This study provides new insight into modification of biomass materials for enhanced removal of heavy metals from waterbodies.

Study of modified ion exchange resins for phosphorus removal from glyphosate by-product salt

In order to achieve the goal of phosphate removal from glyphosate by-product salts, zirconium and zinc ions were successfully loaded onto D202 resin by co-precipitation modification method in this study, and their effectiveness in phosphate removal was evaluated under various conditions. The results of static adsorption experiments showed that the Zr/Zn@D202 resin effectively reduced the phosphate concentration in the glyphosate by-product salts from 10 mg/L to less than 0.1 mg/L, which met the national level emission standard (P < 0.5 mg/L). The adsorption capacity of Zr/Zn@D202 resin was 31.26 mg/g at pH 3, temperature 30 ℃, and adsorption time 2 h. The phosphate removal rate was 99.5%. The phosphate removal efficiency of Zr/Zn@D202 resin was maintained at 92% after five cycles. The samples were characterized by SEM, EDS, XRD, FT-IR and XPS. The characterization results confirmed the successful loading of zirconium and zinc ions, and elucidated that the adsorption mechanism of phosphate mainly involves the increase of the adsorption sites on the surface of the ion-exchange resin and the ion-exchange process. The pseudo-first-order model accurately described the adsorption kinetics, while the adsorption isotherms followed the Langmuir model.

The high adsorption performance of banana (Musa ABB Cv. Kluai 'Namwa') beaded materials modified with zinc and magnesium oxides for cadmium removal

Wastewater contaminated with cadmium is a concern because of its toxicity, persistence, and bioaccumulation to the environment, ecosystem, and human health, so it is required to remove cadmium(II) ions before releasing them to receiving water. Banana powder beads (BPB), banana powder doped ZnO beads (BPZB), banana powder doped MgO beads (BPMB), and banana powder doped ZnO + MgO beads (BPZMB) were synthesized as the novel cadmium adsorbents, and their characterizations, cadmium adsorption performances, cadmium adsorption patterns and mechanisms, thermodynamic study, and reusability were investigated. BPMB had the highest specific surface area of 16.60 m2/g and the smallest pore size of 1.69 nm than other materials. BPB was an amorphous structure, whereas BPZB, BPMB, and BPZMB were crystalline structures presenting their specific metal oxide peaks of ZnO or MgO. They were coarse surfaces and had a spherical shape consisting of C, O, Ca, Cl, and Na. Their main functional groups were O-H, C-H, C=O, C-O, and N-H. The points of zero charge of BPB, BPZB, BPMB, and BPZMB were 5.37, 6.75, 9.87, and 9.43. The cadmium removal efficiencies of BPB, BPZB, BPMB, and BPZMB were 89.18%, 96.62%, 99.59%, and 97.85%, and their qm values were 90.09, 232.56, 454.55, and 303.03 mg/g, respectively. Thus, the metal oxide helped to improve material efficiency, especially MgO. The Freundlich and pseudo-second-order kinetic models were good fit models for describing their adsorption patterns and mechanisms. The increasing temperature affected to decrease their cadmium adsorptions. They could be reused in more than 3 cycles of more than 73% of cadmium adsorption. The electrostatic interaction played an important role in describing their cadmium adsorptions. Therefore, BPBM was a good cadmium adsorbent for application in industrial wastewater treatment since it had a higher performance of cadmium adsorption than other materials.

Hydrochar as a bio-based adsorbent for heavy metals removal: A review of production processes, adsorption mechanisms, kinetic models, regeneration and reusability

The spread of heavy metals throughout the ecosystem has extremely endangered human health, animals, plants, and natural resources. Hydrochar has emerged as a promising adsorbent for removal of heavy metals from water and wastewater. Hydrochar, obtained from hydrothermal carbonization of biomass, owns unique physical and chemical properties that are highly potent in capturing heavy metals via surface complexation, electrostatic interactions, and ion exchange mechanisms. This review focuses on removing heavy metals by hydrochar adsorbents from water bodies. The article discusses factors affecting the adsorption capacity of hydrochars, such as contact time, pH, initial metal concentration, temperature, and competing ions. Literature on optimization approaches such as surface modification, composite development, and hybrid systems are reviewed to enlighten mechanisms undertaking the efficiency of hydrochars in heavy metals removal from wastewater. The review also addresses challenges such as hydrochar regeneration and reusability, alongside potential issues related to its disposal and metal leaching. Integration with current water purification methods and the significance of ongoing research and initiatives promoting hydrochar-based technologies were also outlined. The article concludes that combining hydrochar with modern technologies such as nanotechnology and advanced oxidation techniques holds promise for improving heavy metal remediation. Overall, this comprehensive analysis provides valuable insights to guide future studies and foster the development of effective, affordable, and environmentally friendly heavy metal removal technologies to ensure the attainment of safer drinking water for communities worldwide.

Recent advances in environmental and agricultural applications of hydrochars: A review

Hydrochar is a carbonaceous material that is generated through the process of hydrothermal carbonization (HTC) from biomass, which has garnered considerable attention in recent years owing to its potential applications in a diverse range of fields, such as environmental remediation and agriculture. Hydrochar is produced from a diverse range of biomass waste materials and retains exceptional properties, including high carbon content, stability, and surface area, making it an optimal candidate for various enviro-agricultural applications. Moreover, it delves into the production process of hydrochar, with explicit emphasis on the optimization of certain properties during the production of hydrochar from bio-waste. Furthermore, the potential of hydrochar as an adsorbent and catalyst support for heavy metals and dyes was extensively explored, along with a soil remediation potential that can improve the physical, chemical and biological properties of soil. This comprehensive review aims to provide a thorough overview of hydrochar with a particular focus on its production, properties, and prospective applications. The significance of hydrochar is accentuated and the growing need for alternative sources of energy and materials that are environmentally sustainable is highlighted in this paper. Besides, the consequence of hydrochar on soil properties such as water-holding capacity, nutrient retention, and total soil porosity, as well as its influence on soil chemical properties such as cation exchange capacity, electrical conductivity, and surface functionality is scrutinized.

Adsorption effect and mechanism of Cd(II) by different phosphorus-enriched biochars

The resource utilization of agricultural and forestry waste, especially the high-value transformation of low-grade phosphate rock and derivatives, is an important way to achieve sustainable development. This study focuses on the impregnation and co-pyrolysis of rice straw (RS) with fused calcium magnesium phosphate (FMP), FMP modified with citric acid (CA-FMP), and calcium dihydrogen phosphate (MCP) to produce three phosphorous-enriched biochars (PBC). The Cd(II) removal efficiency of biochars before and after phosphorus modification was investigated, along with the adsorption mechanism and contribution of biochars modified with different phosphorus sources to Cd(II) adsorption. The result indicated that CA-FMP and MCP could be more uniformly loaded onto biochar, effectively increasing the specific surface area (SSA) and total pore volume. The adsorption of Cd(II) onto PBC followed a mono-layer chemisorption process accompanied by intraparticle diffusion. The adsorption of Cd(II) by PBC involved ion exchange, mineral precipitation, complexation with oxygen-containing functional groups (OFGs), cation-π interaction, electrostatic interaction, and physical adsorption. Ion exchange was identified as the primary adsorption mechanism for Cd(II) by BC and FBC (51.53% and 53.15% respectively), while mineral precipitation played a major role in the adsorption of Cd(II) by CBC and MBC (51.10% and 47.98% respectively). Moreover, CBC and MBC significantly enhanced the adsorption capacity of Cd(II), with maximum adsorption amounts of 128.1 and 111.5 mg g-1 respectively.

An Exploratory Study of Hydrochar as a Matrix for Biotechnological Applications

This paper explores the potentialities of hydrochar in protein separation and enzyme immobilization for non-energy biorefinery applications of hydrothermal carbonization. An innovative experimental procedure monitors soluble protein-hydrochar interactions and enzymatic reactions in a continuously stirred tank reactor. The hydrochar comes from hydrothermal carbonization of silver fir (200 °C, 30 min, 1/7 solid/water ratio) and standard activation (KOH, oven, 600 °C). Bovine serum albumin, a non-active, globular protein, was adsorbed at ≤3300 mg/g. Sip's isotherms fitted data well (R2 = 0.99999). The immobilization used a commercial β-glucosidase, which catalyzes the hydrolysis of cellobiose to glucose, a bottleneck of the cellulose to fermentable sugar bioconversion network due to the fast enzyme deactivation. The hydrochar adsorbed ≤26 w/w% of enzyme. The heterogeneous biocatalyst operational stability was 24 times that of the soluble one. The results encourage further investigations and foreshadow process schemes coupling hydrothermal carbonization and industrial bioconversions.

Biosorption of aqueous Pb(II) by H3PO4-activated biochar prepared from palm kernel shells (PKS)

The conversion of palm kernel shells (PKS), a major agricultural waste from the palm oil sector, into a potentially high-value biosorbent for heavy metals-contaminated wastewater treatments was explored in this work. Following carbonization, the activated PKS was chemically activated by soaking the biochar in a phosphoric acid (H3PO4) solution at 25 °C. The low-temperature approach benefits from less dangerous acid fume production and operational challenges when compared to the high-temperature procedure. The properties of the biochar were characterized by BET, FTIR, and SEM. The effects of H3PO4 dosage, initial Pb(II) concentration, and adsorbent dosage on removing Pb(II) from synthetic wastewater were investigated in the adsorption study. The activation of PKS biochar with high H3PO4 concentrations led to enhanced removal efficiency. The pseudo-second-order (PSO) kinetic model fitted the experimental data well (R2 0.99), indicating that chemisorption was likely involved in the adsorption of Pb(II) onto activated PKS. Pb(II) sorption was possibly promoted by the presence of phosphate moieties on the adsorbent surface. The Langmuir isotherm best described the sorption of Pb(II) onto the activated PKS (R2 0.97), giving the calculated maximum adsorption capacity (qm) of 171.1 μg/g. In addition to physical sorption, possible adsorption mechanisms included functional group complexation and surface precipitation. Overall, activating PKS biochar with H3PO4 at room temperature could be a promising technique to improve the adsorbent's adsorption efficiency for Pb(II) removal from wastewater.

The role of phosphorus speciation of biochar in reducing available Cd and phytoavailability in mining area soil: Effect and mechanism

The effect of phosphorus (P) speciation in biochar on soil available Cd and its mechanism to alleviate plant Cd stress remain largely unknown. Here, ammonium polyphosphate (PABC)-, phosphoric acid (PHBC)-, potassium dihydrogen phosphate (PKBC)-, and ammonium dihydrogen phosphate (PNBC)-modified biochar were used to investigate P speciation. The Cd immobilization mechanism of biochar was analyzed by XPS and ³¹P NMR, and the soil quality and the mechanism for the biochar to alleviate Cd stress were also determined. The results demonstrated that PBC (pristine biochar), PABC, PHBC, PKBC, and PNBC reduced the content of soil DTPA-Cd by 14.96 % - 32.19 %, 40.44 % - 47.26 %, 17.52 % - 41.78 %, and 21.90 % - 36.64 %, respectively. The XPS and ³¹P NMR results demonstrated that the orthophosphate on the surface of PABC, PHBC, PKBC, and PNBC accounted for 82.06 %, 62.77 %, 33.1 %, and 54.46 %, respectively, indicating that PABC has the highest passivation efficiency on soil Cd, which was ascribed to the highest orthophosphate content on the biochar surface. Pot experiments revealed that PABC could reduce the Cd content by 4.18, 4.41, 4.43, 2.94, and 2.57 folds in roots, stems, leaves, pods, and grains, respectively, and at the same time increase the dry and fresh weight of soybean and decrease Cd toxicity to soybean by improving the antioxidant system. In addition, application of the P-modified biochars improved the enzyme activity and physicochemical properties of the soil. This study provides a new perspective for studying the effect of P-modified biochars on soil Cd immobilization.

Prediction of heavy metals adsorption by hydrochars and identification of critical factors using machine learning algorithms

Hydrochar has become a popular product for immobilizing heavy metals in water bodies. However, the relationships between the preparation conditions, hydrochar properties, adsorption conditions, heavy metal types, and the maximum adsorption capacity (Q_m) of hydrochar are not adequately explored. Four artificial intelligence models were used in this study to predict the Q_m of hydrochar and identify the key influencing factors. The gradient boosting decision tree (GBDT) showed excellent predictive capability for this study (R²=0.93, RMSE=25.65). Hydrochar properties (37%) controlled heavy metal adsorption. Meanwhile, the optimal hydrochar properties were revealed, including the C, H, N, and O contents of 57.28-78.31%, 3.56-5.61%, 2.01-6.42%, and 20.78-25.37%. Higher hydrothermal temperatures (>220 °C) and longer hydrothermal time (>10 h) lead to the optimal type and density of surface functional groups for heavy metal adsorption, which increased the Q_m values. This study has great potential for instructing industrial applications of hydrochar in treating heavy metal pollution.

Hydrogen Peroxide/Phosphoric Acid Modification of Hydrochars for Sulfamethoxazole and Carbamazepine Adsorption: The Role of Oxygen-Containing Functional Groups

Emerging pollutants, such as sulfonamide antibiotics and pharmaceuticals, have been widely detected in water and soils, posing serious environmental and human health concerns. Thus, it is urgent and necessary to develop a technology for removing them. In this work, a hydrothermal carbonization method was used to prepare the hydrochars (HCs) by pine sawdust with different temperatures. To improve the physicochemical properties of HCs, phosphoric acid (H₃PO₄) and hydrogen peroxide (H₂O₂) were used to modify these HCs, and they were referred to as PHCs and HHCs, respectively. The adsorption of sulfamethoxazole (SMX) and carbamazepine (CBZ) by pristine and modified HCs was investigated systematically. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) results indicated that the H₂O₂/H₃PO₄ modification led to the formation of a disordered carbon structure and abundant pores. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy results suggested that carboxyl (-COOH) and hydroxyl (-OH) functional groups of HCs increased after modification, which is the main reason for the higher sorption of SMX and CBZ on H₃PO₄/H₂O₂-modified HCs when compared with pristine HCs. In addition, the positive correlation between -COOH/C=O and logK_d of these two chemicals also suggested that oxygen-containing functional groups played a crucial role in the sorption of SMX and CBZ. The strong hydrophobic interaction and π-π interaction between CBZ and pristine/modified HCs resulted in its higher adsorption when compared with SMX. The results of this study provide a novel perspective on the investigation of adsorption mechanisms and environmental behaviors for organic contaminants by pristine and modified HCs.