Fabrication of Two-Component, Brush-on-Brush Topographical Microstructures by Combination of Atom-Transfer Radical Polymerization with Polymer End-Functionalization and Photopatterning

Fabrication of high-performance cell-imprinted polymers based on AuNPs/MXene composites via metal-free visible light-induced ATRP

Cell-imprinted polymers (CIPs) for yeasts were fabricated via metal-free visible-light-induced atom transfer radical polymerization (MVL ATRP) on the surface of a glassy carbon electrode (GCE) which had been modified with gold nanoparticles (AuNPs)/MXene (Ti₃C₂T_x) composites. Here, the AuNPs/Ti₃C₂T_x composites form a macroporous structure, which could improve the electron transfer rate of the materials and facilitate the leaving or rebinding of cells. Methacrylic acid (MAA) and N,N'-methylene bis-acrylamide (MBA) were selected as the functional monomer and cross-linker of CIPs, because they could form efficient hydrogen bonding with mannan from yeast cell walls. The obtained electrode (CIPs/AuNPs/Ti₃C₂T_x/GCE) was characterized by electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). Further experiments indicated that the CIPs/AuNPs/Ti₃C₂T_x/GCE electrode could be utilized as an electrochemical biosensor to determine yeast cells by differential pulse voltammetry (DPV). The linear response range was 1.0 × 10² to 1.0 × 10⁹ cells per mL and the detection limit was 20 cells per mL (S/N = 3). The CIPs/AuNPs/Ti₃C₂T_x/GCE electrode also showed good selectivity, repeatability, reproducibility, and regeneration. Finally, the proposed sensor was used to detect yeast cells in commercial samples of Saccharomyces boulardii sachets by a standard addition method. The obtained recovery was from 96.9 to 104.8% showing its potential applications in clinical and diagnostic research.

Weak polyelectrolyte brushes

I review experimental developments in the growth and application of surface-grafted weak polyelectrolytes (brushes), concentrating on their surface, tribological, and adhesive and bioadhesive properties, and their role as actuators.

End-functionalized polymers by controlled/living radical polymerizations: synthesis and applications

This review focuses on end-functionalized polymers synthesized by controlled/living radical polymerizations and the applications in fields including bioconjugate formation, surface modification, topology construction, and self-assembly.

Recent Advances in Antifouling Materials for Surface Plasmon Resonance Biosensing in Clinical Diagnostics and Food Safety

Strategies to develop antifouling surface coatings are crucial for surface plasmon resonance (SPR) sensing in many analytical application fields, such as detecting human disease biomarkers for clinical diagnostics and monitoring foodborne pathogens and toxins involved in food quality control. In this review, firstly, we provide a brief discussion with considerations about the importance of adopting appropriate antifouling materials for achieving excellent performances in biosensing for food safety and clinical diagnosis. Secondly, a non-exhaustive landscape of polymeric layers is given in the context of surface modification and the mechanism of fouling resistance. Finally, we present an overview of some selected developments in SPR sensing, emphasizing applications of antifouling materials and progress to overcome the challenges related to the detection of targets in complex matrices relevant for diagnosis and food biosensing.

Folic Acid-Terminated Poly(2-Diethyl Amino Ethyl Methacrylate) Brush-Gated Magnetic Mesoporous Nanoparticles as a Smart Drug Delivery System

Currently, chemotherapy is an important method for the treatment of various cancers. Nevertheless, it has many limitations, such as poor tumour selectivity and multi-drug resistance. It is necessary to improve this treatment method by incorporating a targeted drug delivery system aimed to reduce side effects and drug resistance. The present work aims to develop pH-sensitive nanocarriers containing magnetic mesoporous silica nanoparticles (MMSNs) coated with pH-responsive polymers for tumour-targeted drug delivery via the folate receptor. 2-Diethyl amino ethyl methacrylate (DEAEMA) was successfully grafted on MMSNs via surface initiated ARGET atom transfer radical polymerization (ATRP), with an average particle size of 180 nm. The end groups of poly (2-(diethylamino)ethyl methacrylate) (PDEAEMA) brushes were converted to amines, followed by a covalent bond with folic acid (FA) as a targeting agent. FA conjugated to the nanoparticle surface was confirmed by X-ray photoelectron spectroscopy (XPS). pH-Responsive behavior of PDEAEMA brushes was investigated by Dynamic Light Scattering (DLS). The nanoparticles average diameters ranged from ca. 350 nm in basic media to ca. 650 in acidic solution. Multifunctional pH-sensitive magnetic mesoporous nanoparticles were loaded with an anti-cancer drug (Doxorubicin) to investigate their capacity and long-circulation time. In a cumulative release pattern, doxorubicin (DOX) release from nano-systems was ca. 20% when the particle exposed to acidic media, compared to ca. 5% in basic media. The nano-systems have excellent biocompatibility and are minimally toxic when exposed to MCF-7, and -MCF-7 ADR cells.

Binary polymer brush patterns from facile initiator stickiness for cell culturing

We report a new initiator stickiness method to fabricate micropatterned binary polymer brush surfaces, which are ideal platforms for studying cell adhesion behavior. The atom transfer radical polymerization (ATRP) initiator, ω-mercaptoundecyl bromoisobutyrate (MUDBr), is found to adsorb on several hosting polymer brushes, including poly[oligo(ethylene glycol)methyl ether methacrylate] (POEGMA), poly(2-hydroxyethyl methacrylate) (PHEMA), and poly(glycidyl methacrylate) (PGMA) brushes. Based on the initiator stickiness, micropatterned initiator molecules are printed onto a layer of homogenous hosting polymer brushes via microcontact printing (μCP), and then, vertically, a patterned second layer of polymer brushes is grown from the initiator areas. With this simple, fast, and additive method, we demonstrate the fabrication of various binary polymer brushes, and show their applications for patterning cell microarrays and controlling cell orientation. This new approach to generating binary polymer brushes shows great potential for the manipulation of interfacial phenomena, facilitating a range of applications from semiconductors and lubrication to fundamental cell biology studies.

Spatiotemporal control of polymer brush formation through photoinduced radical polymerization regulated by DMD light modulation

Spatially arranged polymer brushes provide the essential capability of precisely regulating the surface physicochemical and functional properties of various substrates. A novel and flexible polymer brush patterning methodology, which is based on employing a digital mirror device (DMD)-based light modulation technique to spatiotemporally regulate a surface-initiated photoinduced atom transfer radical polymerization (photo-ATRP) process, is presented. Various characterization techniques confirm that the spatially and/or temporally controlled brush formation results in complex PEG-derived brush patterns in accordance with a customized digital image design. A series of step-and-exposure strategies, including in situ multiple exposure, dynamic multiple exposure and dynamic sequential exposure, are developed to implement spatiotemporal regulation of the photo-ATRP process, leading to complex patterned and gradient brushes featuring binary functionalities, pyramid nanostructures and radial directional chemical gradients. Moreover, tunable and radial directional concentration gradients of various biomacromolecules (e.g., streptavidin) are obtained through preparation of height gradients of azido-functionalized brushes and subsequent orthogonal chemical activation aimed at specific protein immobilization. Finally, a unidirectional concentration gradient of fibronectin, surrounded by non-fouling PEG brushes, is fabricated and applied for human umbilical vein endothelial cell (HUVEC) adhesion experiments, whose preliminary results indicate gradient-dependent cell adhesion behavior in response to the concentration gradient of fibronectin. The presented fabrication technique could be integrated with microfluidic devices for sensors and bio-reactors, paving the way for novel approaches for lab-on-a-chip technologies.

Tools for Low-Dimensional Chemistry

Many biological mechanisms can be considered to be low-dimensional systems: their function is determined by molecular objects of reduced dimensionality. Bacterial photosynthesis is a very good example: the photosynthetic pathway is contained within nano-objects (vesicles) whose function is determined by the numbers and nanoscale organization of membrane proteins and by the ratios of the different types of protein that they contain. Systems biology has provided computational models for studying these processes, but there is a need for experimental platforms with which to test their predictions. This Invited Feature Article reviews recent work on the development of tools for the reconstruction of membrane processes on solid surfaces. Photochemical methods provide a powerful, versatile means for the organization of molecules and membranes across length scales from the molecular to the macroscopic. Polymer brushes are highly effective supports for model membranes and versatile functional and structural components in low-dimensional systems. The incorporation of plasmonic elements facilitates enhanced measurement of spectroscopic properties and provides an additional design strategy via the exploitation of quantum optical phenomena. A low-dimensional system that incorporates functional transmembrane proteins and a mechanism for the in situ measurement of proton transport is described.

Nano-Protrusive Gold Nanoparticle-Hybridized Polymer Thin Film as a Sensitive, Multipatternable, and Antifouling Biosensor Platform

Hybrid films consisting of anisotropic octahedral gold nanoparticles (AuNPs) and polymers had their surfaces functionalized and were immobilized on surface plasmon resonance (SPR) sensors for biomolecule detection. Specifically, carboxylated octahedral AuNPs (C-Oh-AuNPs) and poly(allylamine hydrochloride) (PAH) were assembled as ultrathin films by using a layer-by-layer process. The ionic strength generated from the functional groups of C-Oh-AuNP and PAH influenced the composition, its surface morphology, and the reactivity of the film toward further chemical reactions such as the synthesis of spherical AuNPs (S-AuNPs). We were thus able to control the size and the structure of the C-Oh-AuNP and S-AuNPs converted to nano-raspberry-shaped particles. This hierarchical AuNP hybrid film exhibits much more sensitive and stable detection of biomolecules than regular flat chip systems, and this result may be due to the SPR of the AuNP at its surface being able to markedly enhance the local optical field of the chip. The micropatterning of the hybrid coating was also studied by using a soft lithographic patterning method. We, in particular, worked on creating multiplex patterns having different combinations of shapes and fluorescent colors. We expect our hybrid coating system with multicode biomolecular arrays to be used as a powerful platform for biosensor applications.

Fabrication of microstructured binary polymer brush "corrals" with integral pH sensing for studies of proton transport in model membrane systems

Binary brush structures consisting of poly(cysteine methacrylate) (PCysMA) "corrals" enclosed within poly(oligoethylene glycol methyl ether methacrylate) (POEGMA) "walls" are fabricated simply and efficiently using a two-step photochemical process. First, the C-Cl bonds of 4-(chloromethyl)phenylsilane monolayers are selectively converted into carboxylic acid groups by patterned exposure to UV light through a mask and POEGMA is grown from unmodified chlorinated regions by surface-initiated atom-transfer radical polymerisation (ATRP). Incorporation of a ratiometric fluorescent pH indicator, Nile Blue 2-(methacryloyloxy)ethyl carbamate (NBC), into the polymer brushes facilitates assessment of local changes in pH using a confocal laser scanning microscope with spectral resolution capability. Moreover, the dye label acts as a radical spin trap, enabling removal of halogen end-groups from the brushes via in situ dye addition during the polymerisation process. Second, an initiator is attached to the carboxylic acid-functionalised regions formed by UV photolysis in the patterning step, enabling growth of PCysMA brushes by ATRP. Transfer of the system to THF, a poor solvent for PCysMA, causes collapse of the PCysMA brushes. At the interface between the collapsed brush and solvent, selective derivatisation of amine groups is achieved by reaction with excess glutaraldehyde, facilitating attachment of aminobutyl(nitrile triacetic acid) (NTA). The PCysMA brush collapse is reversed on transfer to water, leaving it fully expanded but only functionalized at the brush-water interface. Following complexation of NTA with Ni2+, attachment of histidine-tagged proteorhodopsin and lipid deposition, light-activated transport of protons into the brush structure is demonstrated by measuring the ratiometric response of NBC in the POEGMA walls.

Immobilization of an antimicrobial peptide on silicon surface with stable activity by click chemistry

We click an antimicrobial peptide onto a silicon substrate to protect it from enzymolysis using a polySBMA spacer.

Micrometre and nanometre scale patterning of binary polymer brushes, supported lipid bilayers and proteins

Binary polymer brush patterns were fabricated via photodeprotection of an aminosilane with a photo-cleavable nitrophenyl protecting group. UV exposure of the silane film through a mask yields micrometre-scale amine-terminated regions that can be derivatised to incorporate a bromine initiator to facilitate polymer brush growth via atom transfer radical polymerisation (ATRP). Atomic force microscopy (AFM) and imaging secondary ion mass spectrometry (SIMS) confirm that relatively thick brushes can be grown with high spatial confinement. Nanometre-scale patterns were formed by using a Lloyd's mirror interferometer to expose the nitrophenyl-protected aminosilane film. In exposed regions, protein-resistant poly(oligo(ethylene glycol)methyl ether methacrylate) (POEGMEMA) brushes were grown by ATRP and used to define channels as narrow as 141 nm into which proteins could be adsorbed. The contrast in the pattern can be inverted by (i) a simple blocking reaction after UV exposure, (ii) a second deprotection step to expose previously intact protecting groups, and (iii) subsequent brush growth via surface ATRP. Alternatively, two-component brush patterns can be formed. Exposure of a nitrophenyl-protected aminosilane layer either through a mask or to an interferogram, enables growth of an initial POEGMEMA brush. Subsequent UV exposure of the previously intact regions allows attachment of ATRP initiator sites and growth of a second poly(cysteine methacrylate) (PCysMA) brush within photolithographically-defined micrometre or nanometre scale regions. POEGMEMA brushes resist deposition of liposomes, but fluorescence recovery after photobleaching (FRAP) studies confirm that liposomes readily rupture on PCysMA "corrals" defined within POEGMEMA "walls". This leads to the formation of highly mobile supported lipid bilayers that exhibit similar diffusion coefficients to lipid bilayers formed on surfaces such as glass.

Surface-Initiated Controlled Radical Polymerization: State-of-the-Art, Opportunities, and Challenges in Surface and Interface Engineering with Polymer Brushes

The generation of polymer brushes by surface-initiated controlled radical polymerization (SI-CRP) techniques has become a powerful approach to tailor the chemical and physical properties of interfaces and has given rise to great advances in surface and interface engineering. Polymer brushes are defined as thin polymer films in which the individual polymer chains are tethered by one chain end to a solid interface. Significant advances have been made over the past years in the field of polymer brushes. This includes novel developments in SI-CRP, as well as the emergence of novel applications such as catalysis, electronics, nanomaterial synthesis and biosensing. Additionally, polymer brushes prepared via SI-CRP have been utilized to modify the surface of novel substrates such as natural fibers, polymer nanofibers, mesoporous materials, graphene, viruses and protein nanoparticles. The last years have also seen exciting advances in the chemical and physical characterization of polymer brushes, as well as an ever increasing set of computational and simulation tools that allow understanding and predictions of these surface-grafted polymer architectures. The aim of this contribution is to provide a comprehensive review that critically assesses recent advances in the field and highlights the opportunities and challenges for future work.

Design and mechanisms of antifouling materials for surface plasmon resonance sensors

Surface plasmon resonance (SPR) biosensors have many possible applications, but are limited by sensor chip surface fouling, which blocks immobilization and specific binding by the recognizer elements. Therefore, there is a pressing need for the development of antifouling surfaces. In this paper, the mechanisms of antifouling materials were firstly discussed, including both theories (hydration and steric hindrance) and factors influencing antifouling effects (molecular structures and self-assembled monolayer (SAM) architectures, surface charges, molecular hydrophilicity, and grafting thickness and density). Then, the most recent advances in antifouling materials applied on SPR biosensors were systematically reviewed, together with the grafting strategies, antifouling capacity, as well as their merits and demerits. These materials included, but not limited to, zwitterionic compounds, polyethylene glycol-based, and polysaccharide-based materials. Finally, the prospective research directions in the development of SPR antifouling materials were discussed.

STATEMENT OF SIGNIFICANCE

Surface plasmon resonance (SPR) is a powerful tool in monitoring biomolecular interactions. The principle of SPR biosensors is the conversion of refractive index change caused by molecular binding into resonant spectral shifts. However, the fouling on the surface of SPR gold chips is ubiquitous and troublesome. It limits the application of SPR biosensors by blocking recognition element immobilization and specific binding. Hence, we write this paper to review the antifouling mechanisms and the recent advances of the design of antifouling materials that can improve the accuracy and sensitivity of SPR biosensors. To our knowledge, this is the first review focusing on the antifouling materials that were applied or had potential to be applied on SPR biosensors.

Polythiophene-g-poly(ethylene glycol) with Lateral Amino Groups as a Novel Matrix for Biosensor Construction

In the ever-expanding field of conducting polymer research, functionalized graft hybrid copolymers have gained considerable interest in the biomedical engineering and biosensing applications, particularly. In the present work, a new biosensor based on conducting graft copolymer for the detection of phenolic compounds was developed. Thereby, a robust and novel material, namely "polythiophene-g-poly(ethylene glycol) with lateral amino groups" (PT-NH2-g-PEG) hybrid conducting polymer was synthesized via Suzuki condensation polymerization and characterized with (1)H NMR analysis, UV-vis spectroscopy, gel permeation chromatography (GPC) and fluorescence spectroscopy. PT-NH2-g-PEG architecture was then applied as an immobilization matrix to accomplish extended biosensing function. In a typical process, Laccase was utilized as a model enzyme for the detection of phenolic compounds. Detailed surface characterization of PT-NH2-g-PEG/Lac was performed by cyclic voltammetry, electrochemical impedance spectroscopy, atomic force microscopy, fluorescence microscopy and scanning electron microscopy measurements. Optimum pH and polymer amount were found to be pH 6.5 and 0.5 mg polymer, respectively, with the linear range of 0.0025-0.05 mM and 132.45 μA/mM sensitivity. The kinetic parameters of PT-NH2-g-PEG/Lac are 0.026 mM for Km(app) and 7.38 μA for Imax, respectively. Furthermore, the PT-NH2-g-PEG/Lac biofilm was retained 82% of its activity for 12 days indicating excellent recovery as tested with artificial wastewater.