Cholesterol Based Surface Active Ionic Liquid That Can Form Microemulsions and Spontaneous Vesicles

The Potential Role of Ionic Liquid as a Multifunctional Dental Biomaterial

In craniofacial research and routine dental clinical procedures, multifunctional materials with antimicrobial properties are in constant demand. Ionic liquids (ILs) are one such multifunctional intelligent material. Over the last three decades, ILs have been explored for different biomedical applications due to their unique physical and chemical properties, high task specificity, and sustainability. Their stable physical and chemical characteristics and extremely low vapor pressure make them suitable for various applications. Their unique properties, such as density, viscosity, and hydrophilicity/hydrophobicity, may provide higher performance as a potential dental material. ILs have functionalities for optimizing dental implants, infiltrate materials, oral hygiene maintenance products, and restorative materials. They also serve as sensors for dental chairside usage to detect oral cancer, periodontal lesions, breath-based sobriety, and dental hard tissue defects. With further optimization, ILs might also make vital contributions to craniofacial regeneration, oral hygiene maintenance, oral disease prevention, and antimicrobial materials. This review explores the different advantages and properties of ILs as possible dental material.

Ionic Liquids: Promising Approach for Oral Drug Delivery

Oral administration is the most preferred route for drug administration in clinic. However, due to unsatisfactory physicochemical properties of drugs and various physiological barriers, the oral bioavailability of most poorly water-soluble and macromolecules drugs is low and the therapeutic effect is unsatisfactory. Ionic liquids (ILs), molten salts with unique properties, show amazing potential for oral delivery. In addition to being able to form active pharmaceutical ingredients based ILs (API-ILs) to overcome drug solubility and polymorphism issues, ILs have also been used to enhance the solubility of poorly soluble drugs, enhance drug stability in the gastrointestinal environment, improve drug permeability in intestinal mucus, and facilitate drug penetration across the intestinal epithelial barrier. Furthermore, ILs were attempted as formulation components to develop novel oral drug delivery systems. This review focus on the application progress of ILs in oral drug delivery and the mechanisms. The challenges and perspectives of the development of ILs-based oral delivery systems are also discussed. This article reviews the latest advances of ionic liquids for oral drug delivery, focusing on the application and related mechanisms of ionic liquids in improving the drug physicochemical properties and enhancing drug delivery across physiological barriers.

Lipophilic Vitamin E Diffusion through Bicontinuous Microemulsions

We studied the diffusion properties of lipophilic vitamin E (VE) through bicontinuous microemulsions (BME) using both electrochemical and fluorescence correlation spectroscopy (FCS) measurements. We investigated the effect of different composition ratios of micro-water and micro-oil phases in BMEs (W/O_BME). When we employed the BME with a lower W/O_BME value of 40/60 (oil-rich BME) as an electrolyte solution, we obtained a larger current response from VE at a fluorinated nanocarbon film electrode. Further voltammetric studies revealed that a higher VE diffusion coefficient was observed in the oil-rich BME. The FCS results also exhibited faster diffusion through the oil-rich BME, which played a significant role in accelerating the VE diffusion probably due to the widening of the micro-oil phase pathway in the BME. Moreover, the effect of increasing the VE diffusion was pronounced at the interface between the electrode surface and the BME solution. These results indicate that controlling the conditions of the BME as the measurement electrolyte is very effective for achieving superior electrochemical measurements in a BME.

Recent Advances in Ionic Liquids in Biomedicine

The use of ionic liquids and deep eutectic solvents in biomedical applications has grown dramatically in recent years due to their unique properties and their inherent tunability. This review will introduce ionic liquids and deep eutectics and discuss their biomedical applications, namely solubilization of drugs, creation of active pharmaceutical ingredients, delivery of pharmaceuticals through biological barriers, stabilization of proteins and other nucleic acids, antibacterial agents, and development of new biosensors. Current challenges and future outlooks are discussed, including biocompatibility, the potential impact of the presence of impurities, and the importance of understanding the microscopic interactions in ionic liquids in order to design task-specific solvents.

Surfing the Third Wave of Ionic Liquids: A Brief Review on the Role of Surface-Active Ionic Liquids in Drug Development and Delivery

The relevance of ionic liquids (ILs) is now well established in many fields, as their unique properties make them appealing as 1) greener alternatives to organic solvents (first-generation ILs), 2) tunable task-specific materials (second-generation ILs), and 3) multifunctional players in life and pharmaceutical sciences (third-generation ILs). This third wave of ILs encompasses a wide range of compounds, from bioactive molecules with single or even dual therapeutic action, to potential ingredient molecules for drug formulation and transport systems. In this context, the focus of this review is the emergent role of surface-active ionic liquids (SAILs) in drug development and delivery.

Self-Stabilized Giant Aggregates in Water from Room-Temperature Ionic Liquids with an Asymmetric Polar-Apolar-Polar Architecture

We report the assembly of four imidazolium bromides, each of which bears a naphthyl on one side of the imidazolium cation and a branched alkyl chain on the other. This design creates a new type of amphiphilic ionic liquid with an apolar-polar-apolar structure and a low melting point (m_p, <-20 °C), which has not been achieved by reported counterparts bearing linear alkyl chains. In solvent-free states, microphase segregation occurs where polar and apolar domains arrange bicontinuously as proved by molecular dynamics (MD) simulations. When dispersed in water, self-stabilized giant aggregates formed with ultrahigh colloidal stability (up to years). MD simulations provide clues of discrete bicontinuous phases within the giant aggregates. These newly discovered self-assemblies provide a heterogeneous reservoir that can accommodate guest molecules including the highly apolar fullerene C₆₀, paving the way for a wide range of potential applications.

Self-Assembly of Amphiphiles into Vesicles and Fibrils: Investigation of Structure and Dynamics Using Spectroscopy and Microscopy Techniques

Amphiphiles are a class of molecules which are known to assemble into a variety of nanostructures. The understanding and applications of self-assembled systems are based on what has been learned from biology. Among the vast number of self-assemblies, in this article, we have described the formation, characterization, and dynamics of two important biologically inspired assemblies: vesicles and fibrils. Vesicles, which can be classified into several categories depending on the sizes and components, are of great interest due to their potential applications in drug delivery and as nanoscale reactors. The structure and dynamics of vesicles can also mimic the complex geometry of the cell membrane. On the other hand, the self-assembly of proteins, peptides, and even single amino acids leads to a number of degenerative disorders. Thus, a complete understanding of these self-assembled systems is necessary. In this article, we discuss recent work on vesicular aggregates composed of phospholipids, fatty acids, and ionic as well as nonionic surfactants and single amino acid-based fibrils such as phenylalanine and tyrosine. Beside the characterization, we also emphasize the excited-state dynamics inside the aggregates for a proper understanding of the organization, reactivity, and heterogeneity of the aggregates.

Ionic liquid-induced aggregate formation and their applications

In the last two decades, researchers have extensively studied highly stable and ordered supramolecular assembly formation using oppositely charged surfactants. Thereafter, surface-active ionic liquids (SAILs), a special class of room temperature ionic liquids (RTILs), replace the surfactants to form various supramolecular aggregates. Therefore, in the last decade, the building blocks of the supramolecular aggregates (micelle, mixed micelle, and vesicular assemblies) have changed from oppositely charged surfactant/surfactant pair to surfactant/SAIL and SAIL/SAIL pair. It is also found that various biomolecules can also interact with SAILs to construct biologically important supramolecular assemblies. The very latest addition to this combination of ion pairs is the dye molecules having a long hydrophobic chain part along with a hydrophilic ionic head group. Thus, dye/surfactant or dye/SAIL pair also produces different assemblies through electrostatic, hydrophobic, and π-π stacking interactions. Vesicles are one of the important self-assemblies which mimic cellular membranes, and thus have biological application as a drug carrier. Moreover, vesicles can act as a suitable microreactor for nanoparticle synthesis.

A gemini surfactant-containing system with abundant self-assembly morphology and rheological behaviors tunable by photoinduction

The photoisomerization of OMCA affects the degree of OMCA participation in the formation of mixed micelles and results in the transformation of micellar morphologies.

Aggregation behaviour of biocompatible choline carboxylate ionic liquids and their interactions with biomolecules through experimental and theoretical investigations

The self-assembly of long-chain choline carboxylates accompanied by their interaction with BSA protein were investigated with focus on environmental sustainability.

Energy-Transfer Phenomena in Thermoresponsive and pH- Switchable Fluorescent Diblock Copolymer Vesicles

We describe the development of a polymeric vesicle that not only selectively fluoresces at low pH, a condition prevailing in cancer cells, but also can potentially monitor the thermoresponsive release of a drug even if the drug is nonfluorescent. The developed fluorescence resonance energy transfer (FRET)-based thermoresponsive vesicular nanocarriers are composed of a new poly(PEGMA)-b-poly(NIPA-r-R6GMED) block copolymer, which undergoes pH-switchable superior turn on-off fluorescence characteristics. The block copolymer was synthesized using the RAFT technique, and its solution properties and self-assembly behavior were investigated by turbidity measurements, fluorescence spectroscopy, ¹H NMR, dynamic light scattering, and transmission electron microscopy. The block copolymer self-assembled to form nanostructured vesicles above the critical aggregation temperature under physiologically relevant conditions. Steady-state and time-resolved fluorescence spectroscopy were utilized to study the FRET process between encapsulated hydrophobic guest C-153 (donor) and polymer-bound R6GMED units (acceptor) in the thermoresponsive vesicles. The FRET rate and efficiency were found to vary as a result of the pH-dependent changes in the quantum yield of the acceptor molecules. The occurrence of a highly efficient FRET in this polymeric vesicular nanocarrier at acidic pH, a condition similar to the cytoplasm and cell nucleus in leukemic tissues, and the ability to encapsulate hydrophilic and hydrophobic molecules and their temperature-controlled release make it potentially useful in imaging guided real-time monitoring of drug-delivery vehicles.