Accelerated Development of Hippocampal Neurons and Limited Adhesion of Astrocytes on Negatively Charged Surfaces

Multifunctions of Sustainable Chondroitin Sulfates with Predominant Subtypes and Low Molecular Weights on Neurite Outgrowth

Three chondroitin sulfate (CS) analogues with predominant subtypes (A, C, and E) were prepared from engineered Escherichia coli K4 combined with regioselective sulfation. CS with the designed sulfates as the main components was characterized by nuclear magnetic resonance spectroscopy, elementary analysis, and disaccharide analysis. CS prepared from the native or degraded capsular polysaccharide had molecular weights of 1.55 × 104-1.90 × 104 and 5.6 × 103-7.4 × 103, respectively. We found that CS with dual sulfates promoted the outgrowth and survival of hippocampal neurons, whereas CS with monosulfate had an inhibitory effect. CS interacted with the nerve growth factor (NGF) and tyrosine kinase (TrkA), which activated the extracellular signal-regulated kinase (ERK) signaling pathway to modulate the outgrowth of hippocampal neurons. This work clarified the multiple effects of CS on neurite outgrowth based on nonanimal-sourced glycosaminoglycans, which would benefit efforts in discovering their novel functions and therapeutic applications.

Nanocellulose-collagen composites as advanced biomaterials for 3D in-vitro neuronal model systems

Studying brain diseases and developing therapies requires versatile in vitro systems for long-term neuronal cultures. SH-SY5Y neuroblastoma cells are ideal for modeling neurodegenerative diseases. Although SH-SY5Y cells are commonly used in 2D cultures, 3D systems offer more physiologically relevant models. Studies have shown 3D culturing up to 7 days, but a simple, reproducible, and tunable system has yet to be identified. Cellulose holds potential to fulfill these needs. Cellulose and its derivatives are sustainable, cytocompatible, and ideal for synthesizing biocompatible hydrogels. Its abundance and ease of chemical modification make it a highly attractive biomaterial. This study explored nanocellulose-based hydrogels for promoting neuronal growth and morphogenesis. To enhance cell adhesion, a small amount of collagen was added to the hydrogel, and the resulting cell morphologies were analyzed and compared with those cultured in collagen and Matrigel. By chemically oxidizing cellulose and adjusting the blend, we developed composites that maintained neuronal viability for over 14 days in 3D cultures. Our findings show that nanocellulose-collagen composites offer superior cytocompatibility, promoting neuronal viability and neurite outgrowth more effectively than Matrigel and collagen. These tunable biomaterials support long-term 3D neuronal cultures, making them valuable for creating standardized models for disease research and drug development.

Negatively charged bladder acellular matrix loaded with positively charged adipose-derived mesenchymal stem cell-derived small extracellular vesicles for bladder tissue engineering

Adipose-derived mesenchymal stem cell-derived small extracellular vesicles (Ad-MSC-sEVs/AMEs) combined with scaffold materials are used in tissue-engineered bladders; however, the lack of retention leads to limited distribution of AMEs in the scaffold areas and low bioavailability of AMEs after bladder reconstruction. To improve retention of AMEs, we developed a novel strategy that modifies the surface charge of the bladder acellular matrix (BAM) via oxidative self-polymerization of dopamine-reducing graphene oxide (GO) and AMEs using ε-polylysine-polyethylene-distearyl phosphatidylethanolamine (PPD). We evaluated two BAM surface modification methods and evaluated the biocompatibility of materials and PPD and electrostatic adherence effects between PPD-modified AMEs and rGO-PDA/BAM in vivo and in vitro. Surface modification increased retention of AMEs, enhanced regeneration of bladder structures, and increased electrical conductivity of rGO-PDA/BAM, thereby improving bladder function recovery. RNA-sequencing revealed 543 miRNAs in human AMEs and 514 miRNAs in rat AMEs. A Venn diagram was used to show target genes of miRNA with the highest proportion predicted by the four databases; related biological processes and pathways were predicted by KEGG and GO analyses. We report a strategy for improving bioavailability of AMEs for bladder reconstruction and reveal that enriched miR-21-5p targets PIK3R1 and activates the PI3K/Akt pathway to promote cell proliferation and migration.

Nanoarchitectonics of cellulose nanocrystal conjugated with a tetrasaccharide-glycoprobe for targeting oligodendrocyte precursor cells

Demyelination is a serious complication of neurological disorders, which can be reversed by oligodendrocyte precursor cell (OPC) as the available source of myelination. Chondroitin sulfate (CS) plays key roles in neurological disorders, which still attracted less attention on how CS modulates the fate of OPCs. Nanoparticle coupled with glycoprobe is a potential strategy for investigating the carbohydrate-protein interaction. However, there is lack of CS-based glycoprobe with enough chain length that interact with protein effectively. Herein, we designed a responsive delivery system, in which CS was the target molecule, and cellulose nanocrystal (CNC) was the penetrative nanocarrier. A coumarin derivative (B) was conjugated at the reducing end of an unanimal-sourced chondroitin tetrasaccharide (4mer). This glycoprobe (4B) was grafted to the surface of a rod-like nanocarrier, which had a crystalline core and a poly(ethylene glycol) shell. This glycosylated nanoparticle (N4B-P) displayed a uniform size, improved water-solubility, and responsive release of glycoprobe. N4B-P displayed strong green fluorescence and good cell-compatibility, which imaged well the neural cells including astrocytes and OPCs. Interestingly, both of glycoprobe and N4B-P were internalized selectively by OPCs when they were incubated in astrocytes/OPCs mixtures. This rod-like nanoparticle would be a potential probe for studying carbohydrate-protein interaction in OPCs.

Negatively-charged supported lipid bilayers regulate neuronal adhesion and outgrowth

Primary cortical neurons were cultured on negatively charged supported lipid bilayers (SLBs). Such membranes demonstrated the potential effect of negative charges on neuronal growth and neurite branching and elongation.

Substance P/Heparin-Conjugated PLCL Mitigate Acute Gliosis on Neural Implants and Improve Neuronal Regeneration via Recruitment of Neural Stem Cells

The inflammatory host tissue response, characterized by gliosis and neuronal death at the neural interface, limits signal transmission and longevity of the neural probe. Substance P induces an anti-inflammatory response and neuronal regeneration and recruits endogenous stem cells. Heparin prevents nonspecific protein adsorption, suppresses the inflammatory response, and is beneficial to neuronal behavior. Poly(l-lactide-co-ε-caprolactone) (PLCL) is a soft and flexible polymer, and PLCL covalently conjugated with biomolecules has been widely used in tissue engineering. Coatings of heparin-conjugated PLCL (Hep-PLCL), substance P-conjugated PLCL (SP-PLCL), and heparin/substance P-conjugated PLCL (Hep/SP-PLCL) reduced the adhesion of astrocytes and fibroblasts and improved neuronal adhesion and neurite development compared to bare glass. The effects of these coatings are evaluated using immunohistochemistry analysis after implantation of coated stainless steel probes in rat brain for 1 week. In particular, Hep/SP-PLCL coating reduced the activation of microglia and astrocytes, the neuronal degeneration caused by inflammation, and indicated a potential for neuronal regeneration at the tissue-device interface. Suppression of the acute host tissue response by coating Hep/SP-PLCL could lead to improved functionality of the neural prosthesis.

Fabrication and Characterization of Neurocompatible Ulvan-Based Layer-by-Layer Films

Construction of extracellular matrix-mimetic nanofilms has considerable potential in biomedical and nanomedicinal fields. In this work, we fabricated neurocompatible layer-by-layer (LbL) films based on ulvan (ULV), a highly sulfated polysaccharide having compositional similarity to glycosaminoglycans that play important functional roles in the brain. ULV was durably assembled as a film with chitosan, another marine-derived polysaccharide, and the film enabled the stable adhesion of primary hippocampal neurons with high viability, comparable to the conventional poly-d-lysine surface. Notably, the ULV-based LbL films accelerated neurite outgrowth and selectively suppressed the adhesion of astrocytes, highlighting its potential as an advanced platform for neural implants and devices.

Vapor-Phase Deposition and Electronic Characterization of 3-Aminopropyltriethoxysilane Self-Assembled Monolayers on Silicon Dioxide

Although organosilanes, especially 3-aminopropyltriethoxysilane (APTES), are commonly used to functionalize oxide substrates for a variety of applications ranging from molecular/biosensors and electronics to protective layers, reliable and controlled deposition of these molecules remains a major obstacle. In this study, we use surface potential analyses to record and optimize the gas-phase deposition of APTES self-assembled monolayers (SAMs) and to determine the resulting change of the electrokinetic potential and charge at the solid?liquid interface when the system is exposed to an electrolyte. Using a gas-phase molecular layer deposition setup with an in situ molecule deposition sensor, APTES is deposited at room temperature onto ozone-activated SiO₂. The resulting layers are characterized using various techniques ranging from contact angle analysis, ellipsometry, fluorescence microscopy, X-ray photoelectron spectroscopy, and electrokinetic analysis to AFM. It turns out that adequate postdeposition treatment is crucial to the formation of perfect molecular SAMs. We demonstrate how a thick layer of APTES molecules is initially adsorbed at the surface; however, the molecules do not bind to SiO₂ and are removed if the film is exposed to an electrolyte. Only if the film is kept in a gaseous environment (preferable at low pressure) for a long enough time do APTES molecules start to bind to the surface and form the SAM layer. During this time, superfluous molecules are removed. The resulting modification of the electrokinetic potential at the surface is analyzed in detail for different states.

Neurite Guidance on Laser-Scribed Reduced Graphene Oxide

This paper describes a one-step, chemical-free method to generate micropatterned in vitro neuronal networks on chemically unmodified reduced graphene oxide. The suggested method relies on infrared-based photothermal reduction of graphene oxide, which concurrently leads to the formation of submicrometer-scale surface roughness that promotes neuronal adhesion and guides neurite outgrowth. A commercially available laser source (LightScribe DVD drive) controlled by a computer software can be used to reduce graphene oxide (GO), and its repetitive scribing to a GO film brings about gradual increase and decrease in electrical conductivity and neurite guiding ability of the scribed regions, respectively. Our results also indicate that the observed adhesion-promoting and neurite guiding effect originate from the contrast in surface nanotopography, but not that in conductivity. This method is readily applicable to diverse graphene-based biomedical devices.