PMIDA-Modified Fe3O4 Magnetic Nanoparticles: Synthesis and Application for Liver MRI

The Level of Anti-Polyethylene Glycol (PEG) Immunoglobulin G Antibodies in Human Serum Does Not Correlate with Efficiency of PEGylated Nanoparticle Uptake by Monocytes

The presence of anti-polyethylene glycol (PEG) antibodies can limit the clinical efficacy of PEGylated drugs and cause anaphylactic reactions in patients. Monocytes/macrophages are effector cells involved in IgG-mediated passive systemic anaphylaxis. We studied the influence of human blood serum on the efficiency of uptake of PEGylated nanoparticles by human blood monocytes. It has been shown that magnetic nanoparticles modified with PEG-3000 and solid lipid nanoparticles containing PEG-2000 are avidly internalized by human blood monocytes in vitro, the uptake efficiency depends on the features (composition) of donor blood serum, but does not correlate with the level of the IgG antibody against PEG.

Core-shell micro/nanocapsules: from encapsulation to applications

Encapsulation is the way to wrap or coat one substance as a core inside another tiny substance known as a shell at micro and nano scale for protecting the active ingredients from the exterior environment. A lot of active substances, such as flavours, enzymes, drugs, pesticides, vitamins, in addition to catalysts being effectively encapsulated within capsules consisting of different natural as well as synthetic polymers comprising poly(methacrylate), poly(ethylene glycol), cellulose, poly(lactide), poly(styrene), gelatine, poly(lactide-co-glycolide)s, and acacia. The developed capsules release the enclosed substance conveniently and in time through numerous mechanisms, reliant on the ultimate use of final products. Such technology is important for several fields counting food, pharmaceutical, cosmetics, agriculture, and textile industries. The present review focuses on the most important and high-efficiency methods for manufacturing micro/nanocapsules and their several applications in our life.

Effect of the Silica-Magnetite Nanocomposite Coating Functionalization on the Doxorubicin Sorption/Desorption

A series of new composite materials based on Fe3O4 magnetic nanoparticles coated with SiO2 (or aminated SiO2) were synthesized. It has been shown that the use of N-(phosphonomethyl)iminodiacetic acid (PMIDA) to stabilize nanoparticles before silanization ensures the increased content of a SiO2 phase in the Fe3O4@SiO2 nanocomposites (NCs) in comparison with materials obtained under similar conditions, but without PMIDA. It has been demonstrated for the first time that the presence of PMIDA on the surface of NCs increases the level of Dox loading due to specific binding, while surface modification with 3-aminopropylsilane, on the contrary, significantly reduces the sorption capacity of materials. These regularities were in accordance with the results of quantum chemical calculations. It has been shown that the energies of Dox binding to the functional groups of NCs are in good agreement with the experimental data on the Dox sorption on these NCs. The mechanisms of Dox binding to the surface of NCs were proposed: simultaneous coordination of Dox on the PMIDA molecule and silanol groups at the NC surface leads to a synergistic effect in Dox binding. The synthesized NCs exhibited pH-dependent Dox release, as well as dose-dependent cytotoxicity in in vitro experiments. The cytotoxic effects of the studied materials correspond to their calculated IC50 values. NCs with a SiO2 shell obtained using PMIDA exhibited the highest effect. At the same time, the presence of PMIDA in NCs makes it possible to increase the Dox loading, as well as to reduce its desorption rate, which may be useful in the design of drug delivery vehicles with a prolonged action. We believe that the data obtained can be further used to develop stimuli-responsive materials for targeted cancer chemotherapy.

Inspirations of Cobalt Oxide Nanoparticle Based Anticancer Therapeutics

Cobalt is essential to the metabolism of all animals due to its key role in cobalamin, also known as vitamin B12, the primary biological reservoir of cobalt as an ultra-trace element. Current cancer treatment strategies, including chemotherapy and radiotherapy, have been seriously restricted by their side effects and low efficiency for a long time, which urges us to develop new technologies for more effective and much safer anticancer therapies. Novel nanotechnologies, based on different kinds of functional nanomaterials, have been proved to act as effective and promising strategies for anticancer treatment. Based on the important biological roles of cobalt, cobalt oxide nanoparticles (NPs) have been widely developed for their attractive biomedical applications, especially their potential for anticancer treatments due to their selective inhibition of cancer cells. Thus, more and more attention has been attracted to the preparation, characterization and anticancer investigation of cobalt oxide nanoparticles in recent years, which is expected to introduce novel anticancer treatment strategies. In this review, we summarize the synthesis methods of cobalt oxide nanoparticles to discuss the advantages and restrictions for their preparation. Moreover, we emphatically discuss the anticancer functions of cobalt oxide nanoparticles as well as their underlying mechanisms to promote the development of cobalt oxide nanoparticles for anticancer treatments, which might finally benefit the current anticancer therapeutics based on functional cobalt oxide nanoparticles.

Smart Design of a pH-Responsive System Based on pHLIP-Modified Magnetite Nanoparticles for Tumor MRI

Magnetic Fe3O4 nanoparticles (MNPs) are often used to design agents enhancing contrast in magnetic resonance imaging (MRI) that can be considered as one of the efficient methods for cancer diagnostics. At present, increasing the specificity of the MRI contrast agent accumulation in tumor tissues remains an open question and attracts the attention of a wide range of researchers. One of the modern methods for enhancing the efficiency of contrast agents is the use of molecules for tumor acidic microenvironment targeting, for example, pH-low insertion peptide (pHLIP). We designed novel organosilicon MNPs covered with poly(ethylene glycol) (PEG) and covalently modified by pHLIP. To study the specific features of the binding of pHLIP-modified MNPs to cells, we also obtained nanoconjugates with Cy5 fluorescent dye embedded in the SiO2 shell. The nanoconjugates obtained were characterized by transmission electron microscopy (TEM), attenuated total reflection (ATR), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), dynamic light scattering (DLS), UV and fluorescence spectrometry, thermogravimetric analysis (TGA), CHN elemental analyses, and vibrating sample magnetometry. Low cytotoxicity and high specificity of cellular uptake of pHLIP-modified MNPs at pH 6.4 versus 7.4 (up to 23-fold) were demonstrated in vitro. The dynamics of the nanoconjugate accumulation in the 4T1 breast cancer orthotopically grown in BALB/c mice and MDA-MB231 xenografts was evaluated in MRI experiments. Biodistribution and biocompatibility studies of the obtained nanoconjugate showed no pathological change in organs and in the blood biochemical parameters of mice after MNP administration. A high accumulation rate of pHLIP-modified MNPs in tumor compared with PEGylated MNPs after their intravenous administration was demonstrated. Thus, we propose a promising approach to design an MRI agent with the tumor acidic microenvironment targeting ability.

Continuous size fractionation of magnetic nanoparticles by using simulated moving bed chromatography

The size fractionation of magnetic nanoparticles is a technical problem, which until today can only be solved with great effort. Nevertheless, there is an important demand for nanoparticles with sharp size distributions, for example for medical technology or sensor technology. Using magnetic chromatography, we show a promising method for fractionation of magnetic nanoparticles with respect to their size and/or magnetic properties. This was achieved by passing magnetic nanoparticles through a packed bed of fine steel spheres with which they interact magnetically because single domain ferro-/ferrimagnetic nanoparticles show a spontaneous magnetization. Since the strength of this interaction is related to particle size, the principle is suitable for size fractionation. This concept was transferred into a continuous process in this work using a so-called simulated moving bed chromatography. Applying a suspension of magnetic nanoparticles within a size range from 20 to 120 nm, the process showed a separation sharpness of up to 0.52 with recovery rates of 100%. The continuous feed stream of magnetic nanoparticles could be fractionated with a space-time-yield of up to 5 mg/(L∙min). Due to the easy scalability of continuous chromatography, the process is a promising approach for the efficient fractionation of industrially relevant amounts of magnetic nanoparticles.

Variation in tumor pH affects pH-triggered delivery of peptide-modified magnetic nanoparticles

Acidification of the extracellular matrix, an intrinsic characteristic of many solid tumors, is widely exploited for physiologically triggered delivery of contrast agents, drugs, and nanoparticles to tumor. However, pH of tumor microenvironment shows intra- and inter-tumor variation. Herein, we investigate the impact of this variation on pH-triggered delivery of magnetic nanoparticles (MNPs) modified with pH-(low)-insertion peptide (pHLIP). Fluorescent flow cytometry, laser confocal scanning microscopy and transmission electron microscopy data proved that pHLIP-conjugated MNPs interacted with 4T1 cells in two-dimensional culture and in spheroids more effectively at pH 6.4 than at pH 7.2, and entered the cell via clathrin-independent endocytosis. The accumulation efficiency of pHLIP-conjugated MNPs in 4T1 tumors after their intravenous injection, monitored in vivo by magnetic resonance imaging, showed variation. Analysis of the tumor pH profiles recorded with implementation of original nanoprobe pH sensor, revealed obvious correlation between pH measured in the tumor with the amount of accumulated MNPs.

Self-Assembly Fabrication of Honeycomb-like Magnetic-Fluorescent Fe3O4-QDs Nanocomposites for Bimodal Imaging

Magnetic-fluorescent nanocomposites have a tremendous potential in biomedicine realms as a revolutionary dual-modality probe tool for more accurate medical detection. However, complicated and inefficient postprocesses pose obstacles to obtaining high-quality magnetic-fluorescent nanocomposites. Thus, the fabrication of magnetic-fluorescent functional nanocomposites via a simple, effective, and ideal method remains a challenge and is still waiting to be tapped. The new synthesis approaches are becoming impending demands and probably enable us to address these above-mentioned problems. In this contribution, we present a novel self-assembly synthesis route for the construction of magnetic-fluorescent bimodal imaging nanocomposites rather than adopting sophisticated postpreparative processes. The Fe₃O₄ and quatum dots (QDs) nanocomposites were cross-linked fleetly by cerium(III) ion driven coordination bonds in which the cerium(III) ions served as the cross-connecting node and the carboxylate groups acted as bridging ligands. The potential application for dual-modality imaging capability was validated on tumor-bearing mice. This ingenious strategy was extremely efficient and handy for the magnetic-fluorescent Fe₃O₄-QDs nanocomposite construction. Significantly, our cerium(III) ion driven self-assembly method probably has a wide applicability for nanoparticles and organic molecules containing carboxyl groups but extensive explorations are still necessary.

L-Lysine-modified Fe3O4 nanoparticles for magnetic cell labeling

The efficiency of magnetic labeling with L-Lys-modified Fe₃O₄ magnetic nanoparticles (MNPs) and the stability of magnetization of rat adipose-derived mesenchymal stem cells, lineage-negative (Lin(-)) hematopoietic progenitor cells from mouse bone marrow and human leukemia K562 cells were studied. For this purpose, covalent modification of MNPs with 3-aminopropylsilane and N-di-Fmoc-L-lysine followed by removal of N-protecting groups was carried out. Since the degree of hydroxylation of the surface of the starting nanoparticles plays a crucial role in the silanization reaction and the possibility of obtaining stable colloidal solutions. In present work we for the first time performed a comparative qualitative and quantitative evaluation of the number of adsorbed water molecules and hydroxyl groups on the surface of chemically and physically obtained Fe₃O₄ MNPs using comprehensive FTIR spectroscopy and thermogravimetric analysis. The results obtained can be further used for magnetic labeling of cells in experiments in vitro and in vivo.

Supporting data and methods for the characterization of iron oxide nanoparticles conjugated with pH-(low)-insertion peptide, testing their cytotoxicity and analyses of biodistribution in SCID mice bearing MDA-MB231 tumor

The method of Fe₃O₄ magnetic nanoparticle synthesis by co-precipitation, modification by 3-aminopropylsilane and conjugation with pH-(low)-insertion peptide (pHLIP) is reported. The characterization of nanoparticles by scanning electron microscopy, transmission electron microscopy, Fourier-transform infrared spectroscopy, elemental and thermogravimetric analyses as well as dynamic light scattering and z-potential measurements is provided. The effect of nanoparticles on the viability of mouse and human peripheral blood mononuclear cells is tested by flow cytometry. The experimental details of nanoparticle administration to tumor-bearing mice, magnetic resonance imaging scanning as well as subsequent tumor sample collection and their processing for transmission electron microscopy, inductively coupled plasma atomic emission spectroscopy, histological and immunohistochemical analyses are described. Biodistribution of the nanoparticles in mice and blood serum analysis data for experimental animals are given. The data are useful for an experiment workflow design and for the development of theranostic systems based on magnetic nanoparticles.

pH-triggered delivery of magnetic nanoparticles depends on tumor volume

Nowadays there is growing recognition of the fact that biological systems have a greater impact on nanoparticle target delivery in tumors than nanoparticle design. Here we investigate the targeted delivery of Fe₃O₄ magnetic nanoparticles conjugated with pH-low-insertion peptide (MNP-pHLIP) on orthotopically induced MDA-MB-231 human breast carcinoma xenografts of varying volumes as a model of cancer progression. Using in vivo magnetic resonance imaging and subsequent determination of iron content in tumor samples by inductively coupled plasma atomic emission spectroscopy we found that MNP-pHLIP accumulation depends on tumor volume. Transmission electron microscopy, histological analysis and immunohistochemical staining of tumor samples suggest that blood vessel distribution is the key factor in determining the success of the accumulation of nanoparticles in tumors.

Fe3O4-based nanotheranostics for magnetic resonance imaging-synergized multifunctional cancer management

Iron oxide (Fe₃O₄)-based theranostic agents show great promise toward advancing personalized nanomedicine due to their extraordinary physicochemical and biological properties. This original review aims to highlight and summarize the most recent progress of Fe₃O₄, starting with the synthesis and surface modification of superparamagnetic iron oxide nanoparticles (NPs). Desirable features of Fe₃O₄ are the initial focus, followed by a review of their theranostic applications including sensitive MRI, multimodal imaging and MRI-guided cancer therapy. Finally, potential nanotoxicity, regulatory and clinical translation barriers are addressed to outline future perspectives on Fe₃O₄ NP-based multifunctional theranostic platforms. It is strongly believed that in the near future, Fe₃O₄ NPs will open new routes with regard to cancer management.

A T1/T2 dual functional iron oxide MRI contrast agent with super stability and low hypersensitivity benefited by ultrahigh carboxyl group density

Clinically acceptable safety and efficacy are the most important issues for the design and synthesis of iron oxide MRI contrast agents. In order to meet the practical requirements, a kind of low molecular weight PAA-coated Fe₃O₄ nanoparticle (CS015) with super colloidal stability and low hypersensitivity benefitting from an ultrahigh carboxyl group density was developed in this study. The composition and physicochemical properties of the particles were characterized by TEM, XRD, FTIR and TGA. The ultrahigh density of COOH on the particles (33 COOH per nm²) was verified while a core size of 5.1 nm and a dynamic diameter of 41 nm with a narrow distribution were also achieved. The particles still showed excellent dispersity and stability even after a spray-drying or freeze-drying process, exposure to high temperature sterilized conditions and long-term storage. The nanoparticles could quickly capture iron ions in bulk solution which was confirmed by ITC results, and the bioactive iron concentration of CS015 was greatly decreased (0.54 ± 0.05 mg L^-1) compared to that of commercially available ferumoxytol, iron sucrose and VSOP. Free iron ion release was 1120 times lower than the toxic concentration of iron. An excellent biocompatibility of CS015 with no obvious cytotoxicity and low risk of hypersensitivity has been manifested by cytotoxicity experiments and a passive cutaneous anaphylaxis test. The T₁ and T₂-weighted MRI contrast effects both in vitro and in vivo have also been verified which made CS015 a potential dual MRI contrast agent. Furthermore, theoretically calculated conformation was speculated and all the advantages mentioned above were benefited from the three dimensional brush-like texture of CS015. Therefore, these merits make the CS015 nanoplatform highly suitable in diagnostic applications as a MRI contrast agent.