Spiropyran Sulfonates for Photo- and pH-Responsive Air-Water Interfaces and Aqueous Foam

Using the pH sensitivity of switchable surfactants to understand the role of the alkyl tail conformation and hydrogen bonding at a molecular level in elucidating emulsion stability

HYPOTHESIS

The monoalkyl diamine surfactant, N-dodecylpropane-1,3-diamine (DPDA), is expected to exhibit a pH-dependent charge switchability. In response to pH changes, the interfacial self-assembly of DPDA becomes an intermediary constituent that can potentially modify the interfacial interactions and structural assembly of both the oil and water phases. Hence, we hypothesize that as we change the pH, DPDA will respond to it by changing its charge and alkyl tail conformation as well as the conformation of adjacent phases at the molecular level, consequently affecting emulsion formation and stability. A neutral pH, resulting in a mono-cationic dialkyl amine, affects the conformation, driving an ordered self-assembly and stable emulsion.

EXPERIMENTS

The pH-sensitivity and interfacial activity of DPDA were evaluated through pH titration and interfacial tension measurements. Subsequently, a molecular-level study of DPDA, as a pH-sensitive switchable surfactant, was performed at the dodecane-water interface using SFG spectroscopy. The interpretation of the vibrational spectra was further reinforced by determining the gauche defects in the interfacial alkyl chain organization and the extent of hydrogen (H) bonding between the interfacial water molecules.

FINDINGS

By adjusting the pH of water, the charge of the adsorbed DPDA molecules, their self-assembly, the organization of interfacial molecules, and ultimately the stability of the emulsion were tuned. At pH 7.0, the SFG spectra of DPDA showed that the interfacial alkyl chains were relatively well-ordered, while water molecules also had stronger H-bonding interactions. As a result, the oil-water emulsion showed improved stability. When water was at a high pH, the water molecules had fewer H-bonding interactions and relatively disordered alkyl chains at the interface, providing desirable conditions for demulsification. These observations were compatible with the observation in bulk emulsion preparation, confirming that alkyl chain packing and water H-bonding interactions at the interface contribute to overall emulsion stability.

Supramolecular assemblies of amphiphilic donor-acceptor Stenhouse adducts as macroscopic soft scaffolds

In the design of photoharvesting and photoresponsive supramolecular systems in aqueous medium, the fabrication of amphiphilic photoswitches enables a noninvasive functional response through photoirradiation. Although most aqueous supramolecular assemblies are driven by high-energy and biodamaging UV light, we have previously reported a design of amphiphilic donor-acceptor Stenhouse adducts (DASAs) controlled by white light. Herein, we present a series of DASA amphiphiles (DAs) with minor structural modifications on the alkyl linker chain length connecting the DASA motif with the hydrophilic moiety. The excellent photoswitchability in organic medium and the photoresponsiveness in aqueous medium, driven by visible light, were investigated by UV-vis absorption spectroscopy. The assembled supramolecular nanostructures were confirmed by electron microscopy, while the supramolecular packing was revealed by X-ray diffraction analysis. Upon visible-light irradiation, significant transformations of the DA geometry enabled transformations of the supramolecular assemblies on a microscopic scale, subsequently disassembling macroscopic soft scaffolds of DAs. The current work shows promising use for the fabrication of visible-light-controlled macroscopic scaffolds, offering the next generation of biomedical materials with visible-light-controlled microenvironments and future soft-robotic systems.

Red-light-controlled supramolecular assemblies of indigo amphiphiles at multiple length scales

Amphiphilic molecules functionalized with photoresponsive motifs have attractive prospects for applications in smart functional bio-material ranging from cell-material interfaces to drug delivery systems owing to the precisely controllable functionality of self-assembled hierarchical supramolecular structures in aqueous media by a non-invasive light stimulation with high temporal- and spatial-resolution. However, most of reported photoresponsive amphiphiles are triggered by bio-damaging UV-light, which greatly limits the potential in bio-related applications. Herein, we present newly designed red-light controlled N,N'-diaryl-substituted indigo amphiphiles (IA), exhibiting excellent photoswitchablity and photostability with dual red-/green-light in organic media. Meanwhile, aqueous solutions of IA assembled into supramolecular structures in both microscopic and macroscopic length-scale, though the photoresponsiveness of IA is slightly compromised in aqueous media. At macroscopic length-scale, morphological changes of IA macroscopic scaffold prepared by a shear-flow method can be fine adjusted upon red-light irradiation. Moreover, the preferential attachment of live h-MSCs to IA macroscopic scaffold surface also indicates a good biocompatibility of IA macroscopic scaffold. These results provide the potential for developing the next generation of red-light controlled soft functional materials with good biocompatibility.

Tailoring Multicontrolled Supramolecular Assemblies of Stiff-Stilbene Amphiphiles into Macroscopic Soft Scaffolds as Cell-Material Interfaces

Biocompatible synthetic supramolecular systems have shed light on biomedical and tissue-regenerative material applications. The intrinsic functional applicability, tunability, and stimuli-responsiveness of synthetic supramolecular systems allow one to develop various multicontrolled supramolecular assemblies in aqueous media. However, it remains highly challenging to use state-of-the-art supramolecular assemblies of photoresponsive amphiphiles controlled by multiple stimulations in fabricating macroscopic materials. Herein, we demonstrate a stiff-stilbene amphiphile (SA) multicontrolled supramolecular assembling system that comprises two different charged end groups. The excellent photoswitchabilities of SA in both organic and aqueous media are demonstrated. Furthermore, multiple stimuli, i.e., light, pH, and counterions, are applied to control the supramolecular assembling behaviors, which are monitored by circular dichroism spectroscopy and electron microscopies. This multicontrolled supramolecular system can be systematically assembled into macroscopic soft functional scaffolds, whose structural parameters are investigated by electron microscopies and X-ray diffraction techniques, suggesting the large aspect ratio of SA nanostructures assembled into macroscopic soft scaffolds. The fabricated soft functional scaffold is highly biocompatible for photocontrolled biotarget encapsulation/release selectively, as well as a cell-material interface for diverse cells' attachment. This new synthetic multicontrolled soft functional material provides a new strategy toward the development of next-generation controllable and biocompatible soft functional materials.

Light and pH dual-responsive spiropyran-based cellulose nanocrystals

Reversibly light and pH dual-responsive spiropyran-based cellulose nanocrystals (SP-CNCs) is synthesized by the attachment of carboxyl-containing spiropyran (SP-COOH) onto cellulose nanocrystals (CNCs). The resulting structure and properties of SP-CNCs are examined by Fourier transform infrared spectroscopy (FT-IR), elemental analysis, transmission electron microscopy (TEM), atomic force microscopy (AFM), dynamic laser light scattering (DSL), ζ-potential measurements and ultraviolet-visible (UV-Vis) light absorption spectroscopy. SP-CNCs exhibit excellent photochromic and photoswitching properties. Spiropyran moieties on SP-CNCs can be switched between open-ring merocyanine (MC) and closed ring spiropyran (SP) forms under UV/Vis irradiation, leading to color changes. Moreover, SP-CNCs display improved photoresponsiveness, photoreversibility, fatigue resistance, and stability in DMSO than in H₂O. We further investigate the pH-responsive behavior of SP-CNCs in H₂O. SP-CNCs aqueous solution display different colors at different pH values, which can be directly observed by naked eye, indicating that SP-CNCs can function as a visual pH sensor. These results suggest that light and pH dual-responsive SP-CNCs possess great potential for applications in reversible data storage, sensing, optical switching and light-controlled nanomaterials.

A Modern Look at Spiropyrans: From Single Molecules to Smart Materials

Photochromic compounds of the spiropyran family have two main isomers capable of inter-switching with UV or visible light. In the current review, we discuss recent advances in the synthesis, investigation of properties, and applications of spiropyran derivatives. Spiropyrans of the indoline series are in focus as the most promising representatives of multi-sensitive spirocyclic compounds, which can be switched by a number of external stimuli, including light, temperature, pH, presence of metal ions, and mechanical stress. Particular attention is paid to the structural features of molecules, their influence on photochromic properties, and the reactions taking place during isomerization, as the understanding of the structure-property relationships will rationalize the synthesis of compounds with predetermined characteristics. The main prospects for applications of spiropyrans in such fields as smart material production, molecular electronics and nanomachinery, sensing of environmental and biological molecules, and photopharmacology are also discussed.

Synthesis of d-Gluconic Acetal Surfactants and Their Foaming Behaviors

Sugars are natural and environmentally benign substances, which can offer various hydroxyl groups. The understanding of details of the hydroxyl interactions in the hydrophilic groups of sugar-based surfactants, as well as the related properties, is still indistinct. Here, novel d-gluconic acetal surfactants with bicyclic and monocyclic structures in the head group were designed and synthesized. The obtained surfactant with a bicyclic architecture exhibited excellent foamability and a multistimulus-responsive behavior toward foam stabilization. In addition, the control of foamability from defoaming and foaming could be achieved by changing pH values or bubbling gas of CO₂/N₂. To explore the structural effects such as hydroxyl groups and rigidity of the head group on the properties of sugar-based surfactants, another kind of amphiphilic molecule with various OH- groups and a monocycle in the head group was designed for comparison. These two series of amphiphilic molecules both exhibited good surface activity. However, only the d-gluconic acetal surfactant with a bicyclic structure and a smaller number of OH- groups exhibited excellent foamability. Further studies showed that the foam behaviors were attributed to the conformation and arrangement of the surfactant molecule at the surface layer with the assistance of hydrogen bonds formed by hydroxyl groups and H₂O molecules. In addition, the surfactant could provide an environmentally friendly foamer in many potential applications.

Spiropyran/Merocyanine Amphiphile in Various Solvents: A Joint Experimental–Theoretical Approach to Photophysical Properties and Self-Assembly

This joint experimental-theoretical work focuses on molecular and photophysical properties of the spiropyran-containing amphiphilic molecule in organic and aqueous solutions. Being dissolved in tested organic solvents, the system demonstrates positive photochromism, i.e., upon UV stimulus the colorless spiropyran form is transformed into colorful merocyanine isomer. However, the aqueous solution of the amphiphile possesses a negative photochromism: the orange-red merocyanine form becomes thermodynamically more stable in water, and both UV and vis stimuli lead to the partial or complete photobleaching of the solution. The explanation of this phenomenon is given on the basis of density functional theory calculations and classical modeling including thermodynamic integration. The simulations reveal that stabilization of merocyanine in water proceeds with the energy of ca. 70 kJ mol−1, and that the Helmholtz free energy of hydration of merocyanine form is 100 kJ mol−1 lower as compared to the behavior of SP isomer in water. The explanation of such a difference lies in the molecular properties of the merocyanine: after ring-opening reaction this molecule transforms into a zwitterionic form, as evidenced by the electrostatic potential plotted around the opened form. The presence of three charged groups on the periphery of a flat conjugated backbone stimulates the self-assembly of merocyanine molecules in water, ending up with the formation of elongated associates with stack-like building blocks, as shown in molecular dynamics simulations of the aqueous solution with the concentration above critical micelle concentration. Our quantitative evaluation of the hydrophilicity switching in spiropyran/merocyanine containing surfactants may prompt the search for new systems, including colloidal and polymeric ones, aiming at remote tuning of their morphology, which could give new promising shapes and patterns for the needs of modern nanotechnology.

Visible-light controlled supramolecular transformations of donor-acceptor Stenhouse adducts amphiphiles at multiple length-scale

Designing responsive, adaptive, and dynamic supramolecular systems in water, the incorporation of photoresponsive units in amphiphilic molecular structures enables functional responses in a non-invasive way by using light. However, in aqueous media, vast majority of reported synthetic photoresponsive molecular amphiphiles are commonly driven by high energy and bio-damaging UV-light for supramolecular transformation at multiple length-scale. Herein, we present newly designed visible-light controlled supramolecular assembly of donor-acceptor Stenhouse adducts amphiphiles (DA) with excellent stability and solubility in aqueous media. The excellent photoswitchability in organic media and photoresponsiveness in aqueous media driven by visible-light are found, as confirmed with UV-vis absorption and NMR spectroscopies. Supramolecular assembly at multiple length-scale of DAs is investigated with electron microscopies and X-ray diffraction to show large aspect-ratio of nanostructures assembled into macroscopic soft scaffolds. Upon visible-light irradiation, the large geometrical transformation of DAs enables supramolecular transformations, and subsequently destabilizes the macroscopic soft scaffold to release fluorophores from the scaffolds. These results provide the feasibility in developing the next generation of visible-light controlled macroscopic soft functional scaffold from supramolecular assembly across multiple length-scale without and offer ample opportunity to design future soft robotic materials and functional biomaterials.

Photoenergy Harvesting by Photoacid Solution

Solar energy has seen 180 years of development since the discovery of the photovoltaic effect, having achieved the most successful commercialization in the energy-harvesting fields. Despite its long history, even the most state-of-the-art photovoltaics remain confined to solid-state devices, limiting spatial and light utilization efficiencies. Herein, a liquid-state photoenergy harvester based on a photoacid (PA), a chemical that releases protons upon light irradiation and recombines with them in the dark through a fully reversible reaction, is demonstrated. Asymmetric light exposure on a PA solution contained in a transparent tube generates a pH gradient (ΔpH = 2) along the exposed and dark regions, which charges the Nernst potential up to 0.7 V across the two electrodes embedded at each end, as if a capacitor. Owing to the reversibility of PAs, a PA-driven liquid-state photoenergy harvester (PLPH) generates capacitive currents up to 0.72 mA m^-2  on an irradiation. Notably, the transparent nature of the PLPH enables vertical stacking up to 25 units, which multiplies the light-harvesting efficiencies by over 1000%. This unique approach provides a new route to harness solar energy with a form-factor-free design that maximizes spatial and light-use efficiencies.

Review on the contamination and remediation of polycyclic aromatic hydrocarbons (PAHs) in coastal soil and sediments

The rapid economic and population growth in coastal areas is causing increasingly serious polycyclic aromatic hydrocarbons (PAHs) pollution in these regions. This review compared the PAHs pollution characteristics of different coastal areas, including industrial zones, commercial ports, touristic cities, aquacultural & agricultural areas, oil & gas exploitation areas and megacities. Currently there are various treatment methods to remediate soils and sediments contaminated with PAHs. However, it is necessary to provide a comprehensive overview of all the available remediation technologies up to date, so appropriate technologies can be selected to remediate PAHs pollution. In view of that, we analyzed the characteristics of the remediation mechanism, summarized the remediation methods for soil or sediments in coastal areas, which were physical repair, chemical oxidation, bioremediation and integrated approaches. Besides, this review also reported the development of new multi-functional green and sustainable systems, namely, micro-nano bubble (MNB), biochar, reversible surfactants and peracetic acid. While physical repair, expensive but efficient, was regarded as a suitable method for the PAHs remediation in coastal areas because of land shortage, integrated approaches would produce better results. The ultimate aim of the review was to ensure the successful restructuring of PAHs contaminated soil and sediments in coastal areas. Due to the environment heterogeneity, PAHs pollution in coastal areas remains as a daunting challenge. Therefore, new and suitable technologies are still needed to address the environmental issue.

Reversible photo control of proton chemistry

Spatial, temporal, and remote control of proton chemistry can be achieved by using photoacids, which are molecules that transform from weak to strong acids under light. Most of proton chemistry is driven by a high concentration of protons ([H⁺]), which is difficult to obtain using excited-state photoacids. Metastable-stable state photoacids (mPAHs) can reversibly generate a high [H⁺] under visible light with a moderate intensity. It has been widely applied in different fields, e.g. fueling dissipative assemblies, driving molecular machines, controlling organic reactions, powering nanoreactors, curing diseases, manipulating DNA and proteins, developing smart materials, capturing carbon dioxide in air etc. This article compares mPAH with excited-state photoacid as well as common acids e.g. HCl to explain its advantages. Recent studies on the thermal dynamics, kinetics, and photoreaction of mPAHs are reported. The advantages and disadvantages of the three types of mPAHs, i.e. merocyanine, indazole, and TCF mPAHs, are compared with regard to photo-induced [H⁺], switching rate, and other properties. The mechanisms of controlling or driving functional systems, which involve acid-base reactions, acid catalyzed reactions, ionic bonding, coordination bonding, hydrogen bonding, ion exchange, cation-π interaction, solubility, swellability, permeability, and pH change in biosystems, are described. Applications of mPAHs in the chemical, material, energy, biotechnology and biomedical fields published in the past 5 years are reviewed. Prospects in the development and application of mPAHs are discussed.

Molecular photoswitches in aqueous environments

Molecular photoswitches enable dynamic control of processes with high spatiotemporal precision, using light as external stimulus, and hence are ideal tools for different research areas spanning from chemical biology to smart materials. Photoswitches are typically organic molecules that feature extended aromatic systems to make them responsive to (visible) light. However, this renders them inherently lipophilic, while water-solubility is of crucial importance to apply photoswitchable organic molecules in biological systems, like in the rapidly emerging field of photopharmacology. Several strategies for solubilizing organic molecules in water are known, but there are not yet clear rules for applying them to photoswitchable molecules. Importantly, rendering photoswitches water-soluble has a serious impact on both their photophysical and biological properties, which must be taken into consideration when designing new systems. Altogether, these aspects pose considerable challenges for successfully applying molecular photoswitches in aqueous systems, and in particular in biologically relevant media. In this review, we focus on fully water-soluble photoswitches, such as those used in biological environments, in both in vitro and in vivo studies. We discuss the design principles and prospects for water-soluble photoswitches to inspire and enable their future applications.

Photoisomerization Kinetics of Photoswitchable Thin Films Based on Nanostructure/Molecular Layers of AlN-AO7

The photoisomerization kinetics of photoswitchable thin films based on nanostructure/molecular layers of AlN-AO7 have been studied, investigated and reported. The trans → cis isomerization process occurs by UV-light irradiation. The cis-isomer could be turned back to the trans-isomer by either thermal or optical relaxation. The kinetics and time-evolution of the photoisomerization and reverse isomerization mechanism of AlN-AO7 thin films are investigated by UV-Vis absorbance spectra using relevant models. All phases of AlN-AO7 thin film, initial trans-, cis-, optical trans-, thermal trans-phases, were investigated using UV-Vis absorbance spectra, FTIR spectra, XRD and SEM. Transforming AlN-AO7 thin film from the initial trans-phase into cis-phase leads to curvature in the AO7 leaves and increases in the strain inside the structure. Going back to the trans-phase by either optical or thermal relaxation leads to vanishing the curvature and decreasing the structure's strain. Finally, the energy storage capacity was calculated using DSC and was found to be 36.38 J g^-1 , simultaneously realizing the multisource solar energy storage and environmental heat.

Controlling Growth of Poly (Triethylene Glycol Acrylate-Co-Spiropyran Acrylate) Copolymer Liquid Films on a Hydrophilic Surface by Light and Temperature

A quartz crystal microbalance with dissipation monitoring (QCM-D) was employed for in situ investigations of the effect of temperature and light on the conformational changes of a poly (triethylene glycol acrylate-co-spiropyran acrylate) (P (TEGA-co-SPA)) copolymer containing 12-14% of spiropyran at the silica-water interface. By monitoring shifts in resonance frequency and in acoustic dissipation as a function of temperature and illumination conditions, we investigated the evolution of viscoelastic properties of the P (TEGA-co-SPA)-rich wetting layer growing on the sensor, from which we deduced the characteristic coil-to-globule transition temperature, corresponding to the lower critical solution temperature (LCST) of the PTEGA part. We show that the coil-to-globule transition of the adsorbed copolymer being exposed to visible or UV light shifts to lower LCST as compared to the bulk solution: the transition temperature determined acoustically on the surface is 4 to 8 K lower than the cloud point temperature reported by UV/VIS spectroscopy in aqueous solution. We attribute our findings to non-equilibrium effects caused by confinement of the copolymer chains on the surface. Thermal stimuli and light can be used to manipulate the film formation process and the film's conformational state, which affects its subsequent response behavior.

Self-Assembly of Photoresponsive Molecular Amphiphiles in Aqueous Media

Amphiphilic molecules, comprising hydrophobic and hydrophilic moieties and the intrinsic propensity to self-assemble in aqueous environment, sustain a fascinating spectrum of structures and functions ranging from biological membranes to ordinary soap. Facing the challenge to design responsive, adaptive, and out-of-equilibrium systems in water, the incorporation of photoresponsive motifs in amphiphilic molecular structures offers ample opportunity to design supramolecular systems that enables functional responses in water in a non-invasive way using light. Here, we discuss the design of photoresponsive molecular amphiphiles, their self-assembled structures in aqueous media and at air-water interfaces, and various approaches to arrive at adaptive and dynamic functions in isotropic and anisotropic systems, including motion at the air-water interface, foam formation, reversible nanoscale assembly, and artificial muscle function. Controlling the delicate interplay of structural design, self-assembling conditions and external stimuli, these responsive amphiphiles open several avenues towards application such as soft adaptive materials, controlled delivery or soft actuators, bridging a gap between artificial and natural dynamic systems.

Spiropyran based recognitions of amines: UV-Vis spectra and mechanisms

As one of the important photochromic molecules, spiropyran (SP) compounds are widely used as detectors and fluorescence probes in the environment and bio-imaging field. Although great achievements have been attained for various sophisticated spiropyrans in metal ion sensing, less success is achieved in sensing organic molecules due to the weak interaction between the spiropyran and the target of the organic molecule. In this study, a spiropyran derivative containing a hydroxyl group (SPOH) was employed for the recognition of four kinds of amines via ultraviolet-visible (UV-Vis) spectra. The aliphatic primary amines, aromatic primary amines, aliphatic secondary and tertiary amines, aromatic secondary and tertiary amines were successfully distinguished according to the shapes and trends of their UV-Vis absorption spectra. The chemical reaction between aliphatic, aromatic primary amines and SPOH as well as alkalinity are two vital interaction mechanisms for the recognition process which are testified by Fourier Transform Infrared (FTIR) and Nuclear Magnetic Resonance (NMR). Although SP is generally water-insoluble, it is easy to achieve soluble by fixing SPOH inside micelle or vesicle and thus the results in this study is meaningful for amine recognition utility in environments and biological systems.

Improved photothermal therapy of brain cancer cells and photogeneration of reactive oxygen species by biotin conjugated gold photoactive nanoparticles

Herein, we report on the design and development of functionalized acrylic polymeric nanoparticles with Spiropyrans (SPs) and imidazole moieties via superficial polymerizations. Then, Au³⁺ ions were immobilized and reduced on their surface to obtain photoresponsive gold-decorated polymer nanoparticles(Au-NPs). The synthesized Au-NPs were surface adapted with biotin as specific targeting tumor penetration cells and enhance the intercellular uptake through the endocytosis. FT-IR (Fourier-transform Infrared Spectroscopy), UV-Vis (Ultra Violet-Visible Spectrophotometer), EDS (Energy Dispersive X-Ray Spectroscopy), SEM (Scanning Electron Microscope) and HR-TEM (High-resolution transmission electron microscopy) descriptions were engaged to illustrate their spectral analysis and morphological examinations of Bt@Au-NPs. Fluorescence microscopy images of cellular uptake descriptions and ICP-MS (Inductively coupled plasma mass spectrometry) investigation established the cell lines labeling ability and enhanced targetting efficacy of biotin-conjugated Au-NPs (Bt@Au-NPs) toward C6 glioma cells (brain cancer cells) with 72.5% cellular uptake relative to 30.2% for non-conjugated lone. These were further established through intracellular ROS examinations and in vitro cytotoxicity investigation on the C6 glioma cell line. The solid surface plasmon absorptions of the Au-NPs and Bt@Au-NPs providing raised photothermal therapy under UV irradiation. The synthesized multifunctional Bt@Au-NPs with an inclusive combination of potential resources presented encouraging nanoprobe with targeting capability, improved photodynamic and photothermal cancer therapy.

Highly stable and thermo-responsive gel foams by synergistically combining glycyrrhizic acid nanofibrils and cellulose nanocrystals

HYPOTHESIS

Natural saponin glycyrrhizic acid (GA) and GA nanofibrils (GNFs) are effective foaming agents for formulation of aqueous food-grade foams. Through the synergistic combination of soft semiflexible GNFs with rigid nanofiller cellulose nanocrystals (CNCs), it should be possible to create advanced composite foams with a more complex structure and diverse properties including high stability and stimuli responsiveness.

EXPERIMENTS

Foams containing mixtures of GNFs and CNCs were prepared, and their formation and stability were investigated. A range of microscopy techniques and small deformation oscillatory shear were adopted to examine the microstructure and viscoelasticity of foams, and a stabilization mechanism for highly stable foams was then established. Further, the temperature-responsive destabilization of foams was evaluated.

FINDINGS

CNCs are homogeneously distributed in the architecture and mechanically reinforce the GNF fibrillar network, leading to a highly viscoelastic composite network in the continuous phase of foams, which is the key factor responsible for their high stability. Such ultra-stable gel foams display tunable thermo-responsive behavior and a rapid on-demand destabilization upon heating by inducing a phase transition of the bulk composite network. Our work opens up new scenarios on the use of a novel combination of all-natural, sustainable nanoscale building blocks to develop aqueous "superfoams" which are highly stable, stimulable and processable.

Thermodynamics and kinetics of protonated merocyanine photoacids in water

Metastable-state photoacids (mPAHs) are chemical species whose photo-activated state is long-lived enough to allow for proton diffusion. Liao's photoacid (1) represents the archetype of mPAHs, and is being widely used on account of its unique capability to change the acidity of aqueous solutions reversibly. The behavior of 1 in water, however, still remains poorly understood. Herein, we provide in-depth insights on the thermodynamics and kinetics of 1 in water through a series of comparative 1H NMR and UV-Vis studies and relative modelling. Under dark conditions, we quantified a three-component equilibrium system where the dissociation (K a) of the open protonated form (MCH) is followed by isomerization (K c) of the open deprotonated form (MC) to the closed spiropyran form (SP) - i.e., in the absence of light, the ground state acidity can be expressed as K GS a = K a(1 + K c). On the other hand, under powerful and continuous light irradiation we were able to assess, for the first time experimentally, the dissociation constant (K MS a) of the protonated metastable state (cis-MCH). In addition, we found that thermal ring-opening of SP is always rate-determining regardless of pH, whereas hydrolysis is reminiscent of what is found for Schiff bases. The proposed methodology is general, and it was applied to two other compounds bearing a shorter (ethyl, 2) and a longer (butyl, 3) alkyl-1-sulfonate bridge. We found that the pK a remains constant, whereas both pK c and pK MS a linearly increase with the length of the alkyl bridge. Importantly, all results are consistent with a four-component model cycle, which describes perfectly the full dynamics of proton release/uptake of 1-3 in water. The superior hydrolytic stability and water solubility of compound 3, together with its relatively high pK GS a (low K c), allowed us to achieve fully reversible jumps of 2.5 pH units over 18 consecutive cycles (6 hours).

β-Lactoglobulin Adsorption Layers at the Water/Air Surface: 4. Impact on the Stability of Foam Films and Foams

The complexity and high sensitivity of proteins to environmental factors give rise to a multitude of variables, which affect the stabilization mechanisms in protein foams. Interfacial and foaming properties of proteins have been widely studied, but the reported unique effect of pH, which can be of great interest to applications, has been investigated to a lesser extent. In this paper, we focus on the impact of pH on the stability of black foam films and corresponding foams obtained from solutions of a model globular protein—the whey β-lactoglobulin (BLG). Foam stability was analyzed utilizing three characteristic parameters (deviation time, transition time and half-lifetime) for monitoring the foam decay, while foam film stability was measured in terms of the critical disjoining pressure of film rupture. We attempt to explain correlations between the macroscopic properties of a foam system and those of its major building blocks (foam films and interfaces), and thus, to identify structure-property relationships in foam. Good correlations were found between the stabilities of black foam films and foams, while relations to the properties of adsorption layers appeared to be intricate. That is because pH-dependent interfacial properties of proteins usually exhibit an extremum around the isoelectric point (pI), but the stability of BLG foam films increases with increasing pH (3–7), which is well reflected in the foam stability. We discuss the possible reasons behind these intriguingly different behaviors on the basis of pH-induced changes in the molecular properties of BLG, which seem to be determining the mechanism of film rupture at the critical disjoining pressure.