Employing Asymmetrical Thieno[3,4-d]pyridazin-1(2H)-one Block Enables Efficient Ternary Polymer Solar Cells with Improved Light-Harvesting and Morphological Properties

What We have Learnt from PM6:Y6

Over the past three years, remarkable advancements in organic solar cells (OSCs) have emerged, propelled by the introduction of Y6-an innovative A-DA'D-A type small molecule non-fullerene acceptor (NFA). This review provides a critical discussion of the current knowledge about the structural and physical properties of the PM6:Y6 material combination in relation to its photovoltaic performance. The design principles of PM6 and Y6 are discussed, covering charge transfer, transport, and recombination mechanisms. Then, the authors delve into blend morphology and degradation mechanisms before considering commercialization. The current state of the art is presented, while also discussing unresolved contentious issues, such as the blend energetics, the pathways of free charge generation, and the role of triplet states in recombination. As such, this review aims to provide a comprehensive understanding of the PM6:Y6 material combination and its potential for further development in the field of organic solar cells. By addressing both the successes and challenges associated with this system, this review contributes to the ongoing research efforts toward achieving more efficient and stable organic solar cells.

Impact of backbone linkage positions on the molecular aggregation behavior of polymer photovoltaic materials

It is imperative to advance the structural design of conjugated materials to achieve a practical impact on the performance of photovoltaic devices. However, the effect of the linkage positions (meta-, para-) of the backbone on the molecular packing has been relatively little explored. In this study, we have synthesized two wide-bandgap polymer photovoltaic materials from identical monomers with different linkage positions, using dibenzo[c,h][2,6]-naphthyridine-5,11-(6H,12H)-dione (DBND) as the building block. This study shows that the para-connected polymer exhibits an unexpected 0.2 eV higher ionization potential and a resultant higher open-circuit voltage than the meta-connected counterpart. We found that different linkage positions result in different intermolecular binding energies and molecular aggregation conformations, leading to different HOMO energy levels and photovoltaic performances. Specifically, theoretical calculations and 2D-NMR indicate that P(p-DBND-f-2T) performs a segregated stacking of f-2T and DBND units, while P(m-DBND-f-2T) films form π-overlaps between f-2T and DBND. These results show that linkage position adjustment on the polymeric backbone exerts a profound influence on the molecular aggregation of the materials. Also, the effect of isomerism on the polymer backbone is crucial in designing polymer structures for photovoltaic applications.

Recent Progress in Organic Solar Cells: A Review on Materials from Acceptor to Donor

In the last few decades, organic solar cells (OSCs) have drawn broad interest owing to their advantages such as being low cost, flexible, semitransparent, non-toxic, and ideal for roll-to-roll large-scale processing. Significant advances have been made in the field of OSCs containing high-performance active layer materials, electrodes, and interlayers, as well as novel device structures. Particularly, the innovation of active layer materials, including novel acceptors and donors, has contributed significantly to the power conversion efficiency (PCE) improvement in OSCs. In this review, high-performance acceptors, containing fullerene derivatives, small molecular, and polymeric non-fullerene acceptors (NFAs), are discussed in detail. Meanwhile, highly efficient donor materials designed for fullerene- and NFA-based OSCs are also presented. Additionally, motivated by the incessant developments of donor and acceptor materials, recent advances in the field of ternary and tandem OSCs are reviewed as well.

Stability, optoelectronic and thermal properties of two-dimensional Janusα-Te2S

Motivated by recent progress in the two-dimensional (2D) materials of group VI elements and their experimental fabrication, we have investigated the stability, optoelectronic and thermal properties of Janusα-Te₂S monolayer using first-principles calculations. The phonon dispersion and MD simulations confirm its dynamical and thermal stability. The moderate band gap (∼1.5 eV), ultrahigh carrier mobility (∼10³cm²V^-1s^-1), small exciton binding energy (0.26 eV), broad optical absorption range and charge carrier separation ability due to potential difference (ΔV = 1.07 eV) on two surfaces of Janusα-Te₂S monolayer makes it a promising candidate for solar energy conversion. We propose various type-II heterostructures consisting of Janusα-Te₂S and other transition metal dichalcogenides for solar cell applications. The calculated power conversion efficiencies of the proposed heterostructures, i.e.α-Te₂S/T-PdS₂,α-Te₂S/BP andα-Te₂S/H-MoS₂are ∼21%, ∼19% and 18%, respectively. Also, the ultralow value of lattice thermal conductivity (1.16 W m^-1K^-1) of Janusα-Te₂S makes it a promising material for the fabrication of next-generation thermal energy conversion devices.

Two Compatible Acceptors as an Alloy Model with a Halogen-Free Solvent for Efficient Ternary Polymer Solar Cells

A ternary strategy of halogen-free solvent processing can open up a promising pathway for the preparation of polymer solar cells (PSCs) on a large scale and can effectively improve the power conversion efficiency with an appropriate third component. Herein, the green solvent o-xylene (o-XY) is used as the main solvent, and the non-fullerene acceptor Y6-DT-4F as the third component is introduced into the PBB-F:IT-4F binary system to broaden the spectral absorption and optimize the morphology to achieve efficient PSCs. The third component, Y6-DT-4F, is compatible with IT-4F and can form an "alloy acceptor", which can synergistically optimize the photon capture, carrier transport, and collection capabilities of the ternary device. Meanwhile, Y6-DT-4F has strong crystallinity, so when introduced into the binary system as the third component can enhance the crystallization, which is conducive to the charge transport. Consequently, the optimal ternary system based on PBB-F:IT-4F:Y6-DT-4F achieved an efficiency of 15.24%, which is higher than that of the binary device based on PBB-F:IT-4F (13.39%).

Sb2TeSe2 Monolayers: Promising 2D Semiconductors for Highly Efficient Excitonic Solar Cells

On the basis of density functional theory computations, we demonstrated that two-dimensional (2D) α- and β-Sb2TeSe2 monolayers are promising candidates for constructing high-efficiency heterojunction excitonic solar cells. These two 2D materials possess moderate band gaps (∼1.1 eV), which can be flexibly tuned by applying external strains. They possess high carrier mobility (∼3000 cm² V^-1 s^-1) and can absorb sunlight over the whole range of the solar spectrum. Remarkably, the α- and β-Sb2TeSe2 monolayers can form desirable type II heterostructures with HfSe2 and BiOI monolayers, respectively. The power conversion efficiencies of α-Sb₂TeSe₂/HfSe₂ and β-Sb₂TeSe₂/BiOI heterojunction excitonic solar cells can reach 22.5 and 20.3%, respectively. Since α-Sb2TeSe2 and β-Sb2TeSe2 monolayers have good stability and high synthesis feasibility, they have important applications in photovoltaic solar cell devices.

Benzobis(Thiazole)-Based Conjugated Polymer with Varying Alkylthio Side-Chain Positions for Efficient Fullerene-Free Organic Solar Cells

Alkylthio groups can be used to modulate energy levels and molecular packing of organic semiconductors, which makes it important in the design of materials for organic solar cell. However, its effect has not been sufficiently exploited as most of the studies report introducing an alkylthio group to the donor unit and seldom to the acceptor unit of donor-acceptor conjugated polymers. In this report, two alkylthio-substituted polymers, namely, PBB-TSA and PBB-TSD, with benzo[1,2-d:4,5-d']bis(thiazole) (BBT) as the acceptor unit and benzo[1,2-b:4,5-b']dithiophene (BDT) as the donor unit, were rationally designed, synthesized, and applied in organic photovoltaics. An alkylthio side chain was substituted on the BBT-accepting unit for PBB-TSA, while for PBB-TSD, the alkylthio side chain was substituted on the BDT donor unit. PBB-TSA and PBB-TSD show upshifted and downshifted energy levels, respectively, compared to the nonsulfur-substituted material. Both polymers exhibit dominate face-on orientation, while PBB-TSD exhibits higher crystallinity compared to PBB-TSA. With the contribution of lower energy level and beneficial film morphology, the device based on PBB-TSD/IT-4F has much higher power conversion efficiency (PCE) of 14.6%, whereas the PBB-TSA blend had a lower PCE of 10.7%. 1,8-Diiodooctane can effectively optimize the blend film morphology, and the effect on device performance has also been demonstrated in detail. This result indicates that introducing an alkylthio side chain into the donor or acceptor moieties would result in materials with different energy levels and thus would be utilized to match with various acceptors, achieving optimized performance in organic solar cells.

Significantly Boosting Efficiency of Polymer Solar Cells by Employing a Nontoxic Halogen-Free Additive

Traditional additives like 1,8-diiodooctane and 1-chloronaphthalene were successfully utilized morphology optimization of various polymer solar cells (PSCs) in an active layer, but their toxicity brought by halogen atoms limits their corresponding large-scale manufacturing. Herein, a new nontoxic halogen-free additive named benzyl benzoate (BB) was introduced into the classic PSCs (PTB7-Th:PC₇₁BM), and an optimal power conversion efficiency (PCE) of 9.43% was realized, while there was a poor PCE for additive free devices (4.83%). It was shown that BB additives could inhibit PC₇₁BM's overaggregation, which increased the interface contact area and formed a better penetration path of an active layer. In addition, BB additives could not only boost the distribution of a PTB7-Th donor at the surface, beneficial to suppressing exciton recombination in inverted devices but also boost the crystallinity of a blend layer, which is conducive to exciton dissociation and charge transport. Our work effectively improved a device performance by using a halogen-free additive, which can be referential for industrialization.

A novel boron ketoiminate-based conjugated polymer with large Stokes shift: AIEE feature and cell imaging application

A novel π-extended boron ketoiminate-based conjugated polymer with a typical AIEE feature has been successfully synthesized and used for cell imaging application.