Multicompartment Microparticles of SBT Triblock Terpolymers through 3D Confinement Assembly

Recent Progress on Preparation of Anisotropic Block Copolymer Particles Self-Assembled in 3D Emulsion Droplets

Self-assembly of block copolymers (BCPs) into anisotropic colloidal particles within 3D emulsion droplets has attracted considerable interest since the confined assembly in deformable geometries offers significant potential for designing and constructing specific anisotropic polymer materials for various applications. By precisely controlling the deformation of emulsion droplets, nucleation, and deposition sequence of BCP segments at the oil/water interface, various anisotropic polymer assembly particles with tunable shapes and internal structures can be generated. This review summarizes the recent advancements in the design and formation of anisotropic polymer assembly particles via confined assembly of BCPs, including an overview of emulsification techniques and methods, the regulation of particle shapes and internal structures, as well as the diverse applications of resulting anisotropic particles. Typically, the regulation of anisotropic shapes can be achieved through experimental approaches, such as the volume ratio and interactions between blocks, surfactant selectivity, crystallization-induced deformation, stimuli-responsive additives, evaporation rate, post-annealing, confinement degree, and disassembly of prepared polymer colloids. Finally, the further perspectives and challenges in the construction anisotropic functional polymer materials are discussed.

Bifunctional additive-driven shape transitions of block copolymer particles through synergistic quaternization and protonation

Block copolymer (BCP) particles with tailored shapes and nanostructures hold promise for applications in cell adhesion, photonic system, and energy storage due to their unique optical and rheological properties. Conventional approaches relying on surfactant-mediated self-assembly often limit particle geometries to simple structures. Herein, we present a versatile approach to expand the morphology of poly(styrene-block-2-vinylpyridine) (PS-b-P2VP) BCP particles through the incorporation of 9-bromononanoic acid (BNA), a bifunctional additive that facilitates synergistic quaternization and protonation. Increasing the BNA-to-2VP molar ratio enhances P2VP hydrophilicity and decreases the pH value, driving dramatic shape transitions from onion-like spheres to tulip bulbs, ellipsoids, discs, and Janus cups. This morphological diversity is attributed to synergetic interfacial instability-driven water infiltration and pH-induced repulsion of protonated P2VP chains. Additives with a single functional group, however, yield limited morphologies, such as tulip bulbs or onion-like spheres. Notably, Janus cups fabricated via this strategy exhibit selective cargo-loading capabilities, highlighting the importance of precise control over the internal composition and structure of BCP particles.

Effect of Defined Block Sequence Terpolymers on Antifungal Activity and Biocompatibility

Invasive fungal infections cause over 3.7 million deaths worldwide annually, underscoring the critical need for new antifungal agents. Developing selective antifungal agents is challenging due to the shared eukaryotic nature of both fungal and mammalian cells. Toward addressing this, synthetic polymers designed to mimic host defense peptides are promising new candidates for combating fungal infections. This study investigates well-defined multiblock terpolymers with specific arrangements of cationic, hydrophobic, and hydrophilic groups, as potential antifungal agents. The block sequence in these copolymers significantly impacts their minimum inhibition concentration (MIC) against Candida albicans and biocompatibility. Furthermore, compared to their statistical counterparts, these block polymers exhibit lower MIC values in certain instances. Notably, triblock terpolymers containing a central hydrophobic block present an enhanced antifungal efficacy and biocompatibility. These findings highlight the potential of block sequence-controlled polymers as a versatile platform for developing customized and targeted antifungal therapies.

Responsive Surfactant-Driven Morphology Transformation of Block Copolymer Microparticles

Block copolymer (BCP) microparticles, which exhibit rapid change of morphology and physicochemical property in response to external stimuli, represent a promising avenue for the development of programmable smart materials. Among the methods available for generating BCP microparticles with adjustable morphologies, the confined assembly of BCPs within emulsions has emerged as a particularly facile and versatile approach. This review provides a comprehensive overview of the role of responsive surfactants in modulating interfacial interactions at the oil-water interface, which facilitates controlled BCP microparticle morphology. We elucidate how variations in the properties of responsive surfactants, activated by external stimuli, influence BCP chain arrangement and interfacial selectivity. Additionally, this review explores the applications of shape-switchable microparticles in advanced technologies such as smart display, fluorescence modulation, magnetic resonance imaging, drug delivery, and photonic crystal. Finally, the challenges and prospective future directions in this rapidly evolving field are discussed.

Neutral Interface Directed 3D Confined Self-Assembly of Block Copolymer: Anisotropic Patterned Particles with Ordered Structures

Three-dimensional confined self-assembly (3D-CSA) of block copolymers (BCPs) is a distinctive and robust strategy that can yield colloidal polymer particles boasting ordered internal structures and diverse morphologies. The unique advantage of neutral interface lies in its ability to create anisotropic particles with surface patterns. The resulting unique polymer particles exhibit deformability under swelling, coupled with excellent spreadability and optical properties. These particles can also be used for fabrication of anisotropic nanoobjects or mesoporous particles via disassembly or serving as templates. This review comprehensively outlines the research advancements in neutral interface-guided 3D-CSA systems, including surfactant engineering, internal structure control, properties and future possibilities of anisotropic patterned particles.

Dynamic Photonic Janus Colloids with Axially Stacked Structural Layers

Diblock copolymer (dBCP) particles capable of dynamic shape and color changes have gained significant attention due to their versatility in programmable shapes and intricate nanostructures. However, their application in photonic systems remains limited due to challenges in achieving a sufficient number of defect-free photonic layers over a tens-of-micrometer scale. In this study, we present a pioneering demonstration of photonic dBCP particles featuring over 300 axially stacked photonic layers with responsive color- and shape-transforming capabilities. Our approach leverages the complex interplay between the macrophase separation of multiple incompatible components and the microphase separation of dBCP from solvent-evaporative microemulsions. Specifically, continuous phase separation of silicone oil from polystyrene-block-poly(2-vinylpyridine) (PS-b-P2VP), triggered by solvent evaporation, promotes the anisotropic growth of PS-b-P2VP layers. This results in the formation of Janus colloids, where an oil droplet merges with a nanostructured polymer cone and lamellar structures align along the long axis of the cone. We highlight the capability to precisely adjust the particle morphology and the corresponding orientation, dispersion, and structural color window by modulating both the molecular weight of PS-b-P2VP and the volume ratio between PS-b-P2VP and silicone oil. Furthermore, reversible swelling/deswelling of photonic colloids is visualized and correlated with their structural colors. Finally, we demonstrate the potential of this study by presenting a multicolor-patterned array of photonic colloids, highlighting the possibilities for applications in smart photonic ink and devices.

Nanosheet Particles with Defect-Free Block Copolymer Structures Driven by Emulsions Containing Crystallizable Surfactants

Highly anisotropic-shaped particles with well-ordered internal nanostructures have received significant attention due to their unique shape-dependent photonic, rheological, and electronic properties and packing structures. In this work, nanosheet particles with cylindrical block copolymer (BCP) arrays are achieved by utilizing collapsed emulsions as a scaffold for BCP self-assembly. Highly elongated structures with large surface areas are formed by employing crystallizable surfactants that significantly reduce the interfacial tension of BCP emulsions. Subsequently, the stabilized elongated emulsion structures lead to the formation of BCP nanosheets. Specifically, when polystyrene-block-polydimethylsiloxane (PS-b-PDMS) and 1-octadecanol (C18-OH) are co-assembled within an emulsion, C18-OH penetrates the surfactant layer at the emulsion interface, lowering the interfacial tension (i.e., below 1 mN m-1 ) and causing emulsion deformation. In addition, C18-OH crystallization allows for kinetic arrest of the collapsed emulsion shape during solvent evaporation. Consequently, PS-b-PDMS BCPs self-assemble into defect-free structures within nanosheet particles, exhibiting an exceptionally high aspect ratio of over 50. The particle formation mechanism is further investigated by controlling the alkyl chain length of the fatty alcohol. Finally, the coating behavior of nanosheet particles is investigated, revealing that the deposition pattern on a substrate is strongly influenced by the particle's shape anisotropy, thus highlighting their potential for advanced coating applications.

Shaping Block Copolymer Microparticles by Positively Charged Polymeric Nanoparticles

Shape-transforming block copolymer (BCP) microparticles have attracted extensive attention due to their promising applications in nanotechnology, biomedicines, interfacial science, and other fields. As their performance is highly associated to their shape and structure, it is highly important to realize the precise control of particle shape. In this report, we propose a method to regulate the shape and structure of polystyrene-b-polydimethoxysiloxane (PS-b-PDMS) microparticles by using positively charged core-crosslinked nanoparticles (CNPs) as a co-surfactant, combining with cationic surfactant cetyltrimethylammonium bromide (CTAB). The electrostatic repulsive interactions between CNPs and CTAB dominate the shape of PS-b-PDMS particles. Upon introducing NaCl, the electrostatic repulsion is reduced, resulting in the reshape of PS-b-PDMS particles from striped Janus ellipsoids to onion-like microspheres at a critical concentration of NaCl (c_NaCl ). Interestingly, we find that the critical c_NaCl first increased then reached a plateau, as the increase in the crosslinking degree of the CNPs. Our work provides a simple strategy to tailor the morphology of BCPs by manipulating the electrostatic interaction. This article is protected by copyright. All rights reserved.

Confinement-Assembly of Terpolymer-based Janus Nanoparticles

While the confinement assembly of block copolymers (BCPs) into functional microparticles has been extensively studied, little is known about the behavior of Janus nanoparticles (JNPs) in spherical confinement. Here, we investigate the confinement self-assembly of JNPs in drying emulsion droplets and compare their behavior to their ABC triblock terpolymer precursor. Emulsions of both materials were prepared using Shirasu Porous Glass (SPG) membranes leading to narrow size distributions of the microparticles with average hydrodynamic radii in the range of R_h = 250 - 500 nm (depending on the pore radius, R_pore ). The internal structure of the microparticles was verified with transmission electron microscopy (TEM) on ultrathin cross-sections and compared to the corresponding bulk morphologies. While the confinement-assembly of terpolymers resulted in microparticles with ordered inner morphologies, order for JNPs diminished when the Janus balance (JB) deviated from parity. This article is protected by copyright. All rights reserved.

Structure Regulation of Block Copolymer Assemblies in Emulsion Droplets by Adding a Selective Solvent

Generally, nanostructured polymer particles are prepared by three-dimensional (3D) confined self-assembly (3D-CSA) of block copolymers (BCPs), while micelles are obtained through self-assembly of BCPs in dilute solutions. Herein, a facile yet robust strategy is developed to regulate the assembled structures of BCP, poly(styrene-block-4-vinylpyridine) (PS-b-P4VP), from nanostructured particles to micelles. The assemblies are prepared by an emulsion-solvent diffusion-induced self-assembly route, which is conducted by dialysis. A key feature of this strategy is that a P4VP-selective solvent (e.g., ethanol) is added to the dialysate to tune the interfacial behavior of the droplets and assembled structures of PS-b-P4VP. Our results reveal that in the presence of slight ethanol, the surface and internal structural transitions of nanostructured particles are caused by changes in the interfacial selectivity and packing parameter. Interestingly, interfacial instability, which results in the formation of micelles, is observed when the dialysate contains 50 vol.% ethanol or more. The reason can be ascribed to the decreased interface tension, which is induced by the increase in ethanol and enhanced solubility of P4VP. This facile strategy provides a new opportunity to bridge the gap between traditional 3D-CSA and solution self-assembly of BCPs, offering a promising route to engineer morphologies and nanostructures of polymeric assemblies. This article is protected by copyright. All rights reserved.

Nanoscale Effects on the Surfactant Adsorption and Interface Charging in Hexadecane/Water Emulsions

Nanoscale properties at interfaces play a key role in the colloidal stability of emulsions and other soft matter materials where physical properties need to be controlled from the nano to macroscopically visible length scales. Our molecular level understanding of oil-water interfaces arises mostly from results at extended interfaces and the common view that emulsions are stabilized by a large number of surfactant molecules at the droplet's interface which, however, has been recently challenged. In this work, we show that the particle size and the curvature of oil droplets at the nanoscale is of great importance for the interface adsorption of dodecyl sulfate surfactants and possible counterion condensation at the charged hexadecane-water interface. Using second-harmonic scattering, we have studied the surface charge of oil droplets in nanoemulsions where we systematically varied the particle size R between 80 and 270 nm and demonstrate that the surface charge density σ changes drastically with size: For sizes >200 nm, σ is similar to what can be expected at flat extended interfaces, while σ is dramatically reduced by almost an order of magnitude when the particle size of the oil droplet is 80 nm. Using a theoretical approach that considers counterion condensation, we quantify the nanoscale effects on the change in surface charge with particle size and find excellent agreement with our experimental result. Modeling of the experimental results also implies that the charge per particle remains constant and depends on a critical balance of surfactant adsorption and ion condensation.

Morphology and Degradation of Multicompartment Microparticles Based on Semi-Crystalline Polystyrene-block-Polybutadiene-block-Poly(L-lactide) Triblock Terpolymers

The confinement assembly of block copolymers shows great potential regarding the formation of functional microparticles with compartmentalized structure. Although a large variety of block chemistries have already been used, less is known about microdomain degradation, which could lead to mesoporous microparticles with particularly complex morphologies for ABC triblock terpolymers. Here, we report on the formation of triblock terpolymer-based, multicompartment microparticles (MMs) and the selective degradation of domains into mesoporous microparticles. A series of polystyrene-block-polybutadiene-block-poly(L-lactide) (PS-b-PB-b-PLLA, SBL) triblock terpolymers was synthesized by a combination of anionic vinyl and ring-opening polymerization, which were transformed into microparticles through evaporation-induced confinement assembly. Despite different block compositions and the presence of a crystallizable PLLA block, we mainly identified hexagonally packed cylinders with a PLLA core and PB shell embedded in a PS matrix. Emulsions were prepared with Shirasu Porous Glass (SPG) membranes leading to a narrow size distribution of the microparticles and control of the average particle diameter, d ≈ 0.4 µm–1.8 µm. The core–shell cylinders lie parallel to the surface for particle diameters d < 0.5 µm and progressively more perpendicular for larger particles d > 0.8 µm as verified with scanning and transmission electron microscopy and particle cross-sections. Finally, the selective degradation of the PLLA cylinders under basic conditions resulted in mesoporous microparticles with a pronounced surface roughness.

Photoswitchable Surfactant-Driven Reversible Shape- and Color-Changing Block Copolymer Particles

Polymer particles that switch their shape and color in response to light are of great interest for the development of programmable smart materials. Herein, we report block copolymer (BCP) particles with reversible shapes and colors activated by irradiation with ultraviolet (UV) and visible lights. This shape transformation of the BCP particles is achieved by a spiropyran-dodecyltrimethylammoium bromide (SP-DTAB) surfactant that changes its amphiphilicity upon photoisomerization. Under UV light (365 nm) irradiation, the hydrophilic ring-opened merocyanine form of the SP-DTAB surfactant affords the formation of spherical, onion-like BCP particles. In contrast, when exposed to visible light, surfactants with the ring-closed form yield prolate or oblate BCP ellipsoids with axially stacked nanostructures. Importantly, the change in BCP particle morphology between spheres and ellipsoids is reversible over multiple UV and visible light irradiation cycles. In addition, the shape- and color-switchable BCP particles are integrated to form a composite hydrogel, demonstrating their potential as high-resolution displays with reversible patterning capabilities.

Kinetically Controlling the Length of Self-Assembled Polymer Nanofibers Formed by Intermolecular Hydrogen Bonds

Strong directional hydrogen bonds represent a suitable supramolecular force to drive the one-dimensional (1D) aqueous self-assembly of polymeric amphiphiles resulting in cylindrical polymer brushes. However, our understanding of the kinetics in these assembly processes is still limited. We here demonstrate that the obtained morphologies for our recently reported benzene tris-urea and tris-peptide conjugates are strongly pathway-dependent. A controlled transfer from solutions in organic solvents to aqueous environments enabled a rate-dependent formation of kinetically trapped but stable nanostructures ranging from small cylindrical or spherical objects (<50 nm) to remarkably large fibers (>2 μm). A detailed analysis of the underlying assembly mechanism revealed a cooperative nature despite the steric demands of the polymers. Nucleation is induced by hydrophobic interactions crossing a critical water content, followed by an elongation process due to the strong hydrogen bonds. These findings open an interesting new pathway to control the length of 1D polymer nanostructures.

Halogen-Bond Mediated 3D Confined Assembly of AB Diblock Copolymer and C Homopolymer Blends

Halogen-bond driven assembly, a world parallel to hydrogen-bond, has emerged as an attractive tool for constructing (macro)molecular arrangement. However, knowledge about halogen-bond mediated confined-assembly in emulsion droplets is limited so far. An I^…. N bond mediated confined-assembly pathway to enable order-order phase transitions is reported here. Compared to hydrogen bonds, the distinct features of halogen bonds (e.g., higher directionality, hydrophobicity, favored in polar solvents), offers opportunities to achieve novel nanostructures and materials. Polystyrene-b-poly(4-vinyl pyridine) (PS-b-P4VP) AB diblock copolymer is chosen as halogen acceptor, while an iodotetrafluorophenoxy substituted C-type homopolymer, (poly(3-(2,3,5,6-tetrafluoro-4-iodophenoxy)propyl acrylate), PTFIPA) is designed as halogen donor, synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. Formation of halogen bonding donor-acceptor pairs between the PTFIPA homopolymer and the P4VP segments presented in PS-b-P4VP, increase the volume of P4VP domains, in turn inducing an order-to-order morphology transition sequence: changing from spherical → cylindrical → lamellar → inverse cylindrical, by tuning the PTFIPA content and choice of surfactant. Subsequent selective swelling/deswelling of the P4VP domains give rise to further internal morphology transitions, creating tailored mesoporous microparticles, disassembled nanodiscs, and superaggregates. It is believed that these results will stimulate further examinations of halogen bonding interactions in emulsion droplets and many areas of application.

Magnetic Microemulsions Stabilized by Alkyltrimethylammonium-Based Magnetic Ionic Liquids Surfactants (MILSs)

While traditional microemulsions are versatile media for nanoscience and nanotechnology, stimulus-responsive microemulsions are more challenging to realize, and only a handful of cases have been reported. We here introduce magnetic microemulsions (MMEs) stabilized by alkyltrimethylammonium-based magnetic ionic liquids surfactants (MILSs), paired with water as the polar phase, aliphatic oils as the nonpolar phase, and aliphatic alcohols as the cosurfactant. n-Hexane coupled with n(MILSs/1-butanol) = 1:4 showed the most excellent ability to form MMEs, and the range of the monophasic region was expanded with increasing alkyl chain length of MILSs cation. Classical oil-in-water (O/W), bicontinuous (BC) sponge structure, and inverse water-in-oil (W/O) subregions were clarified by conductivity method. Dynamic light scattering showed that the diameter of W/O microemulsions droplets were about 2-6 nm. Magnetic susceptibility and rheological measurements revealed that these MMEs are with high magnetic susceptibility and low viscosity, which show interesting potential applications based on a manipulation via external magnetic field. Moreover, these MMEs showed Newtonian-like flow behavior within respective subregions, and their magnetic susceptibility was not affected by the subregion structure but MILSs mass fraction.

Shaping Block Copolymer Microparticles by pH-Responsive Core-Cross-Linked Polymeric Nanoparticles

Block copolymer microparticles with controllable morphology have drawn widespread attention owing to their promising applications in photonic materials, energy storage, and other areas. Hence, it is highly desired to achieve a controllable transformation of microparticle morphology. In this work, we report a simple method to shape the morphology of polystyrene-block-poly(dimethylsiloxane) (PS-b-PDMS) microparticles, by employing core-cross-linked polymeric nanoparticles (CNPs) as cosurfactants which are synthesized through cross-linking P4VP segment of PS-block-poly(4-vinylpyridine) (PS-b-P4VP). The addition of pH-responsive CNPs makes the shape of pH-inert PS-b-PDMS microparticles sensitive to pH value. The PS-b-PDMS microparticles transformed from elongated Janus pupa-like particles to onion-like particles by decreasing the pH value of the aqueous phase. The deformation mechanism is investigated by changing pH value, the weight fraction of CNPs, and surfactant property. This study provides a facile strategy to deform microparticles of pH-inert BCPs by tuning pH value, which is anticipated to be applicable to other non-pH-responsive BCP microparticles.

Transformable Colloidal Polymer Particles with Ordered Internal Structures

Based on studies combining experiments and simulations, internally ordered colloidal particles that are able to undergo morphological transformations both in shape and internal structure are presented. The particles are prepared by emulsion solvent evaporation-induced 3D soft confined assembly of di-block copolymer polystyrene-block-poly(4-vinylpyridine) (PS-b-P4VP). Control over the solvent selectivity leads to a dramatic change in shape and internal structure for particles. Pupa-like particles of lamellar morphology are obtained when using a non-selective solvent, while patchy particles possessing a plum pudding structure formed when the solvent is selective for PS-block. More interestingly, 3D soft confined annealing drives order-order morphological transformation of the particles. The morphology of reshaped particles can be well controlled by varying the solvent selectivity, annealing time, and interfacial interaction. The experimental results can be explained based on simulations. This study can offer considerable scope for the design of new stimuli-responsive colloidal particles for potential applications in photonic crystal, drug delivery and release, sensor and smart coating, etc.

Terpolymer Multicompartment Nanofibers as Templates for Hybrid Pt Double Helices

Hybrid inorganic/block copolymer (BCP) materials have become increasingly relevant for application in heterogeneous catalysis, microelectronics, and nanomedicine. While block copolymer templates are widely used for the formation of inorganic nanostructures, multicompartment templates could give access to more complex shapes and inner structures that are challenging to obtain with traditional processes. Here, we report the formation and characterization of hybrid platinum/polymer helices using multicompartment nanofibers (MCNFs) of polystyrene-block-polybutadiene-block-poly(tert-butyl methacrylate) (PS-b-PB-b-PT) triblock terpolymers as templates. Cross-linking of a PS-b-PB-b-PT helix-on-cylinder morphology resulted in uniform nanofibers with a diameter of 90 nm and a length of several micrometers, as well as an inner PB double helix (diameter 35 nm, pitch 25 nm, core 12 nm). The PB double helix served as template for the sol-gel reaction of H₂PtCl₆ into hybrid Pt double helices (Pt@MCNFs) as verified by STEM, electron tomography, AFM, and SEM. Carbonization of the Pt hybrids into Pt decorated carbon nanofibers (Pt@C) was followed in situ on a TEM heating state. Gradual heating from 25 to 1000 °C induced fusion of amorphous Pt NPs into larger crystalline Pt NP, which sheds light on the aging of Pt NPs in BCP scaffolds under high temperature conditions. The Pt@MCNFs were further sulfonated and incorporated into a filter to catalyze a model compound in a continuous flow process.