Switching between Thermal Initiation and Photoinitiation Redirects RAFT-Mediated Polymerization-Induced Self-Assembly

Modular addition strategy-regulated polymerization-induced self-assembly: an in silico experiment

We propose a modular addition strategy-regulated polymerization-induced self-assembly (PISA) system to effectively control the reaction kinetics and self-assembly morphologies. We validated this strategy by performing in silico experiments on a well-established PISA system. Two categories of modular addition strategies, i.e., the multistep addition strategy and the constant rate addition strategy, were investigated. Results showed that the modular addition operation of macromolecular chain transfer agents (macro-CTAs) effectively regulated the width of the molecular weight distribution for the hydrophobic PSt block, which further led to an assembly of vesicle structures with irregular aspherical cavities. Besides, we found a new transition pathway for the formation of vesicles, which involved generation of small vesicles in the early stage followed by a gradual growth in the intermediate and late stages. In the constant rate addition strategy, with the increase in the addition rate of macro-CTA, we found that the morphology basically tended to change from a micellar structure to a vesicle structure. This study holds potential to inspire future work toward the improvement of experimental techniques in PISA-relevant systems.

Exploiting Seeded RAFT Polymerization for the Preparation of Graft Copolymer Nanoparticles

Although seeded reversible addition-fragmentation chain transfer (RAFT) polymerization is explored as a unique method for the preparation of block copolymer nanoparticles with diverse structures, the preparation of nonlinear polymer nanoparticles by seeded RAFT polymerization is rarely reported. Herein, linear block copolymer nanoparticles are first prepared by RAFT dispersion copolymerization of benzyl methacrylate (BzMA) and 2-(2-(n-butyltrithiocarbonate)propionate)ethyl methacrylate (BTPEMA) with different [BzMA]/[BTPEMA] ratios, and employed as seeds for seeded RAFT polymerization of isobornyl acrylate (IBOA) to prepare graft copolymer nanoparticles with different numbers of PIBOA side chains. Comparing with linear triblock copolymers with the same chemical composition, the graft copolymers can promote the formation of higher-order morphologies (e.g., vesicles) under seeded RAFT polymerization conditions. Effects of reaction parameters on the morphology of graft copolymer nanoparticles are investigated in detail, and two morphological phase diagrams are constructed. It is expected that this study will not only expand the scope of seeded RAFT polymerization but also offer new opportunities for the preparation of unique polymer nanoparticles.

Efficient Synthesis of μ-A(BC)C Miktoarm Star Polymer Assemblies via Aqueous Photoinitiated Polymerization-Induced Self-Assembly

In this study, green light-activated photoiniferter reversible addition-fragmentation chain transfer (RAFT) polymerization of glycerol methacrylate was performed using an ω,ω-heterodifunctional macro-RAFT agent. Because of the different RAFT controllability of two RAFT groups toward methacrylic monomers, only one RAFT group was activated under green light irradiation, leading to the formation of a diblock copolymer macro-RAFT agent with one RAFT group located at the chain end and the other RAFT group located between two blocks. The obtained diblock copolymer macro-RAFT agent was then used to mediate aqueous photoinitiated RAFT dispersion polymerization of diacetone acrylamide (DAAM), which formed μ-A(BC)C miktoarm star polymer assemblies with a diverse set of morphologies. Comparing with the ABC triblock copolymer, it was found that the architecture of the μ-A(BC)C miktoarm star polymer facilitated the formation of higher-order morphologies. Kinetic studies indicated that the aqueous photoinitiated RAFT dispersion polymerization exhibited ultrafast polymerization behavior, with quantitative monomer conversion being achieved within 5 min. Size exclusion chromatography analysis confirmed that good RAFT control was maintained during the polymerization. A morphological phase diagram for μ-A(BC)C miktoarm star polymer assemblies was constructed by varying the monomer concentration and the [DAAM]/[Macro-RAFT] ratio. We expect that this study not only develops an approach for the preparation of miktoarm star polymer assemblies but also provides mechanistic insights into the polymerization-induced self-assembly of nonlinear polymers.

Grafting Block Copolymer Nanoparticles to a Surface via Aqueous Photoinduced Polymerization-induced Self-Assembly at Room Temperature

The creation of well-defined surface nanostructures is important for a diverse set of applications such as cell adhesion, superhydrophobic coating, and lithography. In this study, we describe a robust bottom-up method for surface functionalization that involves surface-initiated reversible deactivation radical polymerization (RDRP) and the grafting of block copolymer nanoparticles to material surfaces via aqueous photoinduced polymerization-induced self-assembly (photo-PISA) at room temperature. Using silica nanoparticles as a model substrate, colloidal mesoscale hybrid assemblies with various morphologies were successfully prepared. The morphologies can be easily tuned by changing the lengths of macromolecular chain transfer agents and parameters of the silica nanoparticles. The surface-initiated photo-PISA approach can also be employed for other large-scale substrates such as silicon wafer. Taking advantage of mild reaction conditions of this method (room temperature, aqueous medium, and visible light), enzymatic deoxygenation was introduced to develop oxygen-tolerant surface-initiated photo-PISA that can fabricate well-defined nanostructures on large-scale substrates under open-to-air conditions.

Photocatalytic Synthesis of Materials for Regenerative Medicine Using Complex Oxides with β-pyrochlore Structure

Graft copolymerization of methyl methacrylate onto cod collagen was carried out under visible light irradiation (λ = 400-700 nm) at 20-25 °C using the RbTe_1.5W_0.5O₆, CsTeMoO₆, and RbNbTeO₆ complex oxides with β-pyrochlore structure as photocatalysts. The as-prepared materials were characterized by X-ray diffraction, scanning electron microscopy, and UV-Vis diffuse reflectance spectroscopy. It was also found that RbNbTeO₆ with β-pyrochlore structure was not able to photocatalyze the reaction. Enzymatic hydrolysis of the obtained graft copolymers proceeds with the formation of peptides with a molecular weight (MW) of about 20 and 10 kDa. In contrast to collagen, which decomposes predominantly to peptides with MW of about 10 kDa, the ratio of fractions with MW of about 10 kDa and 20 kDa differs much less, their changes are symbatic, and the content of polymers with MW of more than 20 kDa is about 70% after 1 h in the case of graft copolymers. The data obtained indicate that synthetic fragments grafted to the collagen macromolecule do not prevent the hydrolysis of the peptide bonds but change the rate of polymer degradation. This is important for creating network matrix scaffolds based on graft copolymers by cross-linking peptides, which are products of enzymatic hydrolysis.

Gaining Structural Control by Modification of Polymerization Rate in Ring-Opening Polymerization-Induced Crystallization-Driven Self-Assembly

Polymerization-induced self-assembly (PISA) has become an important one pot method for the preparation of well-defined block copolymer nanoparticles. In PISA, morphology is typically controlled by changing molecular architecture and polymer concentration. However, several computational and experimental studies have suggested that changes in polymerization rate can lead to morphological differences. Here, we demonstrate that catalyst selection can be used to control morphology independent of polymer structure and concentration in ring-opening polymerization-induced crystallization-driven self-assembly (ROPI-CDSA). Slower rates of polymerization give rise to slower rates of self-assembly, resulting in denser lamellae and more 3D structures when compared to faster rates of polymerization. Our explanation for this is that the fast samples transiently exist in a nonequilibrium state as self-assembly starts at a higher solvophobic block length when compared to the slow polymerization. We expect that subsequent examples of rate variation in PISA will allow for greater control over morphological outcome.

The Effect of Topology on Block Copolymer Nanoparticles: Linear versus Star Block Copolymers in Toluene

Linear and star block copolymer (BCP) nanoparticles of (polystyrene-block-poly(4-vinylpyridine))_n (PS-b-P4VP)_n with arm numbers of 1, 2, 3, and 4 were prepared by two methods of polymerization-induced self-assembly (PISA) and general self-assembly of block copolymers in the low-polar organic solvent, toluene. The effect of the arm number on the size and/or morphology of the (PS-b-P4VP)_n nanoassemblies synthesized by the two methods in toluene and on the polymerization kinetics was investigated in detail. Our results show that in toluene, a low-polar solvent, the topology not only affected the morphology of the BCP nanoparticles prepared by PISA, but also influenced the BCP nanoparticles synthesized through general self-assembly.

Formation of n-Hexane-in-DMF Nonaqueous Pickering Emulsions: ABC Triblock Worms versus AB Diblock Worms

Nonaqueous Pickering emulsions exhibit promising applications in many industrial areas but have been relatively less studied in the past. In this study, n-hexane-in-DMF nonaqueous Pickering emulsions stabilized by core cross-linked copolymer worms with mixed shells are demonstrated for the first time. Core cross-linked copolymer worms with mixed shells were prepared by seeded reversible addition-fragmentation chain transfer (RAFT) quasi-solution polymerization. Specifically, polystyrene-poly(4-vinylpyridine) (PS-P4VP) diblock copolymer worms were first prepared via RAFT-mediated dispersion polymerization in toluene under the given conditions using PS as both the macro-CTA and the stabilizer block. After the chemical cross-linking of P4VP cores, PS-P4VP diblock copolymer worms were chain-extended with LMA in DMF/toluene (1:9, weight ratio) mixed solvents, producing core cross-linked PS-P4VP-PLMA worms with PS/PLMA mixed shells. The as-prepared core cross-linked PS-P4VP-PLMA worms with mixed PS/PLMA shells were further utilized as Pickering emulsifiers for the generation of nonaqueous n-hexane-in-DMF Pickering emulsions. The emulsifying performances of mixed-shell copolymer worms were compared with those of their spherical and linear analogues with entirely identical chemical compositions as well as PS-P4VP diblock copolymer worm precursors, respectively.

Block Copolymer Vesicles with Tunable Membrane Thicknesses and Compositions Prepared by Aqueous Seeded Photoinitiated Polymerization-Induced Self-Assembly at Room Temperature

Block copolymer vesicles with diverse functionalities and intrinsic hollow structures have received considerable attention due to their broad applications in biomedical fields, including drug delivery, bioimaging, theranostics, gene therapy, etc. However, efficient preparation of block copolymer vesicles with tunable membrane thicknesses and compositions under mild conditions is still a challenge. Herein, we report an aqueous seeded photoinitiated polymerization-induced self-assembly (photo-PISA) for the precise preparation of block copolymer vesicles at room temperature. By changing the total degree of polymerization (DP) of the hydrophobic block in seeded photo-PISA, one can easily tune the membrane thickness without compromising the morphology of vesicles. Moreover, by adding different comonomers such as hydrophobic monomers, hydrophilic monomers, and cross-linkers into seeded photo-PISA, vesicles with different compositions could be prepared without compromising the morphology and colloidal stability. Polymerization kinetics show that seeded photo-PISA can skip the step of in situ self-assembly with a short homogeneous polymerization stage being observed. To demonstrate potential biological applications, enzymatic nanoreactors were constructed by loading horseradish peroxidase (HRP) inside vesicles via seeded photo-PISA. The enzymatic properties of these nanoreactors could be easily regulated by changing the membrane thickness and hydrophobicity. It is expected that this method can provide a facile platform for the precise preparation of block copolymer vesicles that may find applications in different fields.

Simultaneous Synthesis and Self-Assembly of Bottlebrush Block Copolymers at Room Temperature via Photoinitiated RAFT Dispersion Polymerization

Bottlebrush polymers exhibiting unique properties have attracted considerable attention for applications in many research areas. Herein, we report the first simultaneous synthesis and self-assembly of bottlebrush block copolymers at room temperature via photoinitiated polymerization-induced self-assembly (photo-PISA) using multifunctional macromolecular chain transfer agents (macro-CTAs). Compare with linear block copolymers, the bottlebrush block copolymers could promote the formation of higher-order morphologies (e.g. vesicles) when targeting similar degrees of polymerization (DPs). Moreover, a higher polymerization rate was observed in the case of bottlebrush block copolymers. Gel permeation chromatography (GPC) analysis showed that good polymerization control was maintained when synthesizing bottlebrush block copolymers by photo-PISA. Finally, the obtained bottlebrush block copolymer vesicles were used as seeds for further chain extension and multicomponent nanoparticles with a sponge internal structure were formed. We expect this study will not only expand polymer architectures employed in PISA, but also provides a new strategy to synthesize polymer nanoparticles with unique structures. This article is protected by copyright. All rights reserved.

Fluorine-containing nano-objects with the same compositions but different segment distributions: synthesis, characterization and comparison

PHOS-b-PPFS nano-objects and PPFS-b-PHOS nano-objects can be prepared by RAFT PISA and MISA processes, respectively. These nano-objects have the same compositions but different segment distributions and distinct hydrophilic/hydrophobic properties.

Polymers with multiple functions: α,ω-macromolecular photoinitiators/chain transfer agents used in aqueous photoinitiated polymerization-induced self-assembly

A series of α,ω-functionalized polymers with a photoinitiator end group and a RAFT end group were synthesized and employed as macromolecular photoinitiators/chain transfer agents in aqueous photoinitiated polymerization-induced self-assembly.

Organic–inorganic hybrid nanomaterials prepared via polymerization-induced self-assembly: recent developments and future opportunities

This review highlights recent developments in the preparation of organic–inorganic hybrid nanomaterials via polymerization-induced self-assembly.

Customizable nano-sized colloidal tetrahedrons by polymerization-induced particle self-assembly (PIPA)

Colloidal molecules (CMs) are colloidal clusters with molecule-like symmetry and architecture, generated from the self-assembly of nanoparticles with attractive patches. However, large-scale preparation of patchy nanoparticles remains challenging. Here, we...

A3B-type miktoarm star polymer nanoassemblies prepared by reversible addition–fragmentation chain transfer (RAFT) dispersion polymerization

The investigation on a series of A3B-type miktoarm star polymer assemblies by RAFT PISA has revealed the role of A3B architecture in delaying morphological transitions, and the formation of larger vesicles as well as other interesting morphologies.

Pyridine-containing block copolymeric nano-assemblies obtained through complementary hydrogen-bonding directed polymerization-induced self-assembly in water

A diversity of pyridine-containing polymeric nanomaterials with controllable structures and multiple responses were developed through complementary hydrogen-bonding directed polymerization-induced self-assembly in aqueous solution.

Shape-shifting thermoreversible diblock copolymer nano-objects via RAFT aqueous dispersion polymerization of 4-hydroxybutyl acrylate

2-Hydroxypropyl methacrylate (HPMA) is a useful model monomer for understanding aqueous dispersion polymerization. 4-Hydroxybutyl acrylate (HBA) is an isomer of HPMA: it has appreciably higher aqueous solubility so its homopolymer is more weakly hydrophobic. Moreover, PHBA possesses a significantly lower glass transition temperature than PHPMA, which ensures greater chain mobility. The reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization of HBA using a poly(ethylene glycol) (PEG113) precursor at 30 °C produces PEG113-PHBA200-700 diblock copolymer nano-objects. Using glutaraldehyde to crosslink the PHBA chains allows TEM studies, which reveal the formation of spheres, worms or vesicles under appropriate conditions. Interestingly, the partially hydrated highly mobile PHBA block enabled linear PEG113-PHBA x spheres, worms or vesicles to be reconstituted from freeze-dried powders on addition of water at 20 °C. Moreover, variable temperature 1H NMR studies indicated that the apparent degree of hydration of the PHBA block increases from 5% to 80% on heating from 0 °C to 60 °C indicating uniform plasticization. In contrast, the PHPMA x chains within PEG113-PHPMA x nano-objects become dehydrated on raising the temperature: this qualitative difference is highly counter-intuitive given that PHBA and PHPMA are isomers. The greater (partial) hydration of the PHBA block at higher temperature drives the morphological evolution of PEG113-PHBA260 spheres to form worms or vesicles, as judged by oscillatory rheology, dynamic light scattering, small-angle X-ray scattering and TEM studies. Finally, a variable temperature phase diagram is constructed for 15% w/w aqueous dispersions of eight PEG113-PHBA200-700 diblock copolymers. Notably, PEG113-PHBA350 can switch reversibly from spheres to worms to vesicles to lamellae during a thermal cycle.

Expanding the Scope of Polymerization-Induced Self-Assembly: Recent Advances and New Horizons

Over the past decade or so, polymerization-induced self-assembly (PISA) has become a versatile method for rational preparation of concentrated block copolymer nanoparticles with a diverse set of morphologies. Much of the PISA literature has focused on the preparation of well-defined linear block copolymers by using linear macromolecular chain transfer agents (macro-CTAs) with high chain transfer constants. In this review, a recent process is highlighted from an unusual angle that has expanded the scope of PISA including i) synthesis of block copolymers with nonlinear architectures (e.g., star block copolymer, branched block copolymer) by PISA, ii) in situ synthesis of blends of polymers by PISA, and iii) utilization of macro-CTAs with low chain transfer constants in PISA. By highlighting these important examples, new insights into the research of PISA and future impact these methods will have on polymer and colloid synthesis are provided.

Pathway-Dependent Phase Transitions of Supramolecular Self-assemblies Containing Cationic Amphiphiles with Azobenzene and Disulfide Groups

There have been several attempts to construct supramolecular chemical systems that mimic the phase transitions in living systems. However, most of these phase transitions are one-to-one and induced by one stimulus or chemical; there have been few reports on the pathway-dependent phase transition of supramolecular self-assemblies in multi-step. To induce multistep phase transitions, molecular crystals were prepared that contained a cationic amphiphile bearing azobenzene and disulfide groups. A reducing agent caused the crystals to become vesicles, and adjacent, non-touching vesicles fused under UV and subsequent visible light. Adding a reducing agent to the worm-like aggregates that were generated after UV irradiation of the original crystals resulted in the growth of sheet-like aggregates. ¹ H NMR and fluorescence anisotropy measurements showed that a series of phase transitions was induced by changes in the phase structures from molecular conversions of the reactive amphiphiles. The multiple pathway-dependent phase transitions of supramolecular self-assemblies can provide a methodology for developing new stimuli-responsive materials that exhibit the desirable properties under specific circumstances from a systems chemistry viewpoint.

How the Reactive End Group of Macro-RAFT Agent Affects RAFT-Mediated Emulsion Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly via reversible addition-fragmentation chain transfer (RAFT)-mediated emulsion polymerization is an emerging method in which macro-RAFT agents are chain extended with hydrophobic monomers in water to form block copolymer nano-objects. However, almost all RAFT-mediated emulsion polymerizations are limited to AB diblock copolymers by using monofunctional macro-RAFT agents with non-reactive end groups. In this study, the first investigation on how the reactive end group of macro-RAFT agent affects RAFT-mediated emulsion polymerization is reported. Three macro-RAFT agents with different end groups are synthesized and employed in RAFT-mediated emulsion polymerization. Effects of end groups on morphologies of block copolymer nano-objects and polymerization process are studied. Block copolymer nano-objects prepared by using an asymmetric difunctional macro-RAFT agent can be functionalized by further chain extension on the surface. It is expected that the current study will not only expand the scope of RAFT-mediated emulsion polymerization, but also provide a novel strategy to prepare functional polymer nanoparticles.

One-Step Preparation of Thermo-Responsive Poly(N-isopropylacrylamide)-Based Block Copolymer Nanoparticles by Aqueous Photoinitiated Polymerization-Induced Self-Assembly

Poly(N-isopropylacrylamide) (PNIPAM) is an important thermo-responsive polymer that finds applications in many areas. However, the preparation of PNIPAM-based block copolymer nanoparticles with higher-order morphologies at high solids is challenging. Herein, aqueous photoinitiated polymerization-induced self-assembly (photo-PISA) of N-isopropylacrylamide (NIPAM) using an asymmetrical cross-linker is developed for one-step preparation of PNIPAM-based block copolymer nanoparticles with various morphologies (spheres, worms, and vesicles). It is demonstrated that reaction temperature has a great effect on both polymerization kinetics and morphologies of block copolymer nanoparticles. Reversible addition-fragmentation chain transfer (RAFT) reactive groups embedded inside the PNIPAM core provide a landscape for further functionalization. PNIPAM-based block copolymer nanoparticles with different surface properties are prepared by seeded photo-PISA at room temperature. Finally, these block copolymer nanoparticles are also used as additives to tune mechanical properties of hydrogels via covalent cross-linking.

Non-thermally initiated RAFT polymerization-induced self-assembly

This review summarizes the recent non-thermal initiation methods in RAFT mediated polymerization-induced self-assembly (PISA), including photo-, redox/oscillatory reaction-, enzyme- and ultrasound wave-initiation.