Formation of Multidomain Hydrogels via Thermally Induced Assembly of PISA-Generated Triblock Terpolymer Nanogels

Modern Trends in Polymerization-Induced Self-Assembly

Polymerization-induced self-assembly (PISA) is a powerful and versatile technique for producing colloidal dispersions of block copolymer particles with desired morphologies. Currently, PISA can be carried out in various media, over a wide range of temperatures, and using different mechanisms. This method enables the production of biodegradable objects and particles with various functionalities and stimuli sensitivity. Consequently, PISA offers a broad spectrum of potential commercial applications. The aim of this review is to provide an overview of the current state of rational synthesis of block copolymer particles with diverse morphologies using various PISA techniques and mechanisms. The discussion begins with an examination of the main thermodynamic, kinetic, and structural aspects of block copolymer micellization, followed by an exploration of the key principles of PISA in the formation of gradient and block copolymers. The review also delves into the main mechanisms of PISA implementation and the principles governing particle morphology. Finally, the potential future developments in PISA are considered.

Strong and Tough Nanostructured Hydrogels and Organogels Prepared by Polymerization-Induced Self-Assembly

In nature, the hierarchical structure of biological tissues endows them with outstanding mechanics and elaborated functions. However, it remains a great challenge to construct biomimetic hydrogels with well-defined nanostructures and good mechanical properties. Herein, polymerization-induced self-assembly (PISA) is for the first time exploited as a general strategy for nanostructured hydrogels and organogels with tailored nanodomains and outstanding mechanical properties. As a proof-of-concept, PISA of BAB triblock copolymer is used to fabricate hydrogels with precisely regulated spherical nanodomains. These nanostructured hydrogels are strong, tough, stretchable, and recoverable, with mechanical properties correlating to their nanostructure. The outstanding mechanical properties are ascribed to the unique network architecture, where the entanglements of the hydrophilic chains act as slip links that transmit the tension to the micellar crosslinkers, while the micellar crosslinkers dissipate the energy via reversible deformation and irreversible detachment of the constituting polymers. The general feasibility of the PISA strategy toward nanostructured gels is confirmed by the successful fabrication of nanostructured hydrogels, alcogels, poly(ethylene glycol) gels, and ionogels with various PISA formulations. This work has provided a general platform for the design and fabrication of biomimetic hydrogels and organogels with tailorable nanostructures and mechanics and will inspire the design of functional nanostructured gels.

Synthesis of Cross-Linked Block Copolymer Nano-Assemblies and their Coating Application

Since the discovery of polymerization-induced self-assembly (PISA), convenient synthesis of concentrated block copolymer nano-assemblies dispersed in solvent has been achieved. Now, application of block copolymer nano-assemblies should be paid more attention. In this study, corona-cross-linked block copolymer nanoparticles of poly[dimethylacrylamide-co-(diacetone acrylamide)]-b-polystyrene [P(DMA-co-DAAM)-b-PS] containing the poly(DAAM) segment in the hydrophilic P(DMA-co-DAAM) block are synthesized initially by PISA following dispersion RAFT polymerization and then by covalent intraparticle cross-linking through the poly(DAAM) segment and adipic acid dihydrazide (ADH). Coating application of the corona-cross-linked block copolymer nano-assemblies is tried, and much higher water resistance of the corona-cross-linked block copolymer nano-assemblies than that of the linear block copolymer nano-assemblies is demonstrated. This article is protected by copyright. All rights reserved.

Organic–inorganic hybrid nanomaterials prepared via polymerization-induced self-assembly: recent developments and future opportunities

This review highlights recent developments in the preparation of organic–inorganic hybrid nanomaterials via polymerization-induced self-assembly.

One-Step Preparation of Thermo-Responsive Poly(N-isopropylacrylamide)-Based Block Copolymer Nanoparticles by Aqueous Photoinitiated Polymerization-Induced Self-Assembly

Poly(N-isopropylacrylamide) (PNIPAM) is an important thermo-responsive polymer that finds applications in many areas. However, the preparation of PNIPAM-based block copolymer nanoparticles with higher-order morphologies at high solids is challenging. Herein, aqueous photoinitiated polymerization-induced self-assembly (photo-PISA) of N-isopropylacrylamide (NIPAM) using an asymmetrical cross-linker is developed for one-step preparation of PNIPAM-based block copolymer nanoparticles with various morphologies (spheres, worms, and vesicles). It is demonstrated that reaction temperature has a great effect on both polymerization kinetics and morphologies of block copolymer nanoparticles. Reversible addition-fragmentation chain transfer (RAFT) reactive groups embedded inside the PNIPAM core provide a landscape for further functionalization. PNIPAM-based block copolymer nanoparticles with different surface properties are prepared by seeded photo-PISA at room temperature. Finally, these block copolymer nanoparticles are also used as additives to tune mechanical properties of hydrogels via covalent cross-linking.

The effects of cononsolvents on the synthesis of responsive particles via polymerisation-induced thermal self-assembly

Responsive nanogels were synthesised via RAFT-mediated polymerisation-induced thermal self-assembly in cononsolvent mixtures of water and ethanol. The solvent mixture affected the particle size, tacticity and thermal properties.

A Novel Temperature-Dependent Hydrogel Emulsion with Sol/Gel Reversible Phase Transition Behavior Based on Polystyrene-co-poly(N-isopropylacrylamide)/Poly(N-isopropylacrylamide) Core-Shell Nanoparticle

As a kind of temperature-responsive hydrogel, polystyrene-co-poly(N-isopropylacrylamide)/poly(N-isopropylacrylamide) (PS-co-PNIPAM/PNIPAM) core-shell nanoparticles prepared by two-step copolymerization are widely studied and used because of their specific structures and properties. Unlike most reports about the steady stability of PS-co-PNIPAM/PNIPAM core-shell nanoparticle hydrogel emulsion, in this work, the PS-co-PNIPAM/PNIPAM core-shell nanoparticle hydrogel emulsion (symbolized as PS/PNIPAM hydrogel emulsion), which is prepared after the second step of synthesis and without washing out a large number of PNIPAM polymer segments, shows a reversible temperature-dependent sol-gel transition characteristic during the temperature range of 34-80 °C. The PS/PNIPAM hydrogel emulsion is a normal solution at room temperature, and it changes from a sol to a gel statue when the temperature approaches up to low critical solution temperature (LCST). As the temperature continues to increase, the gel (core-shell nanoparticles as the crosslinkers and the linear PNIPAM chain as the 3D gel network) of the PS/PNIPAM hydrogel emulsion gradually shrinks and drains linearly. Compared with most crosslinked hydrogels, the hydrogel here can be arbitrarily changed in shape according to use needs, which is convenient for use, transportation, and storage. Here a new route is provided for the preparation of a PS/PNIPAM core-shell hydrogel nanoparticle system, as well as a new supramolecular crosslinking sol-gel system for application in biomedical materials, sensors, biological separation, drug release, macromolecular adsorption, and purification.

Polymerization-induced self-assembly for the fabrication of polymeric nano-objects with enhanced structural stability by cross-linking

This review discusses the strategies of core-cross-linking in most of the PISA literatures (including post-polymerization cross-linking, photo-cross-linking and in situ cross-linking) and the applications of the cross-linked nano-objects.

Cross-linking approaches for block copolymer nano-assemblies via RAFT-mediated polymerization-induced self-assembly

This minireview summarizes the current cross-linking approaches to stabilize block copolymer nano-assemblies obtained via RAFT-mediated PISA process.

Synthesis of Multicompartment Nanoparticles of ABC Miktoarm Star Polymers by Seeded RAFT Dispersion Polymerization

Polymeric multicompartment nanoparticles (MCNs) of μ-ABC miktoarm star polymers composed of poly(N,N-dimethylacrylamide) (PDMA), poly(butyl methacrylate) (PBMA), and polystyrene (PS) were synthesized by Cu(I)-catalyzed click reaction and seeded RAFT dispersion polymerization. The synthesized MCNs have a solvophobic PBMA core with separate segregated PS microdomains and a solvophilic PDMA corona. The size and/or morphology of MCNs are correlative to the length of PDMA, PBMA, and PS segments. Ascribed to the characteristic structure, MCNs of μ-DBS can decrease interfacial tension in n-hexane/water, which is much superior to linear diblock copolymer nanoassemblies.

Alkyl α-Hydroxymethyl Acrylate Monomers for Aqueous Dispersion Polymerization-Induced Self-Assembly

Baylis-Hillman reaction was used to afford a series of four alkyl α-hydroxymethyl acrylates, methyl (MHMA), ethyl (EHMA), isopropyl (iPrHMA), and n-butyl (nBHMA) α-hydroxymethyl acrylate, with tunable water solubility. MHMA and EHMA with high water solubility were identified as suitable candidates for aqueous dispersion polymerization-induced self-assembly (PISA). PISA of EHMA and MHMA using poly(ethylene glycol) macromolecular chain transfer agents (PEG₄₅-CTA and PEG₁₁₃-CTA) was investigated under either thermal or photoinitiation at 40-70 °C. Photo-PISA at low temperatures provided both morphological transition and PEG₄₅-PEHMA_x block copolymers with narrow molecular weight distributions. iPrHMA with moderate water solubility was used for dispersion-emulsion polymerization with the formation of vesicles being observed.

New Insights into RAFT Dispersion Polymerization-Induced Self-Assembly: From Monomer Library, Morphological Control, and Stability to Driving Forces

Polymerization-induced self-assembly (PISA) has been established as an efficient, robust, and versatile approach to synthesize various block copolymer nano-objects with controlled morphologies, tunable dimensions, and diverse functions. The relatively high concentration and potential scalability makes it a promising technique for industrial production and practical applications of functional polymeric nanoparticles. This feature article outlines recent advances in PISA via reversible addition-fragmentation chain transfer dispersion polymerization. Considerable efforts to understand morphological control, broaden the monomer library, enhance morphological stability, and incorporate multiple driving forces in PISA syntheses are summarized herein. Finally, perspectives on the future of PISA research are discussed.

Hydrogel scaffolds for differentiation of adipose-derived stem cells

Natural extracellular matrices (ECMs) have been widely used as a support for the adhesion, migration, differentiation, and proliferation of adipose-derived stem cells (ADSCs). However, poor mechanical behavior and unpredictable biodegradation properties of natural ECMs considerably limit their potential for bioapplications and raise the need for different, synthetic scaffolds. Hydrogels are regarded as the most promising alternative materials as a consequence of their excellent swelling properties and their resemblance to soft tissues. A variety of strategies have been applied to create synthetic biomimetic hydrogels, and their biophysical and biochemical properties have been modulated to be suitable for cell differentiation. In this review, we first give an overview of common methods for hydrogel preparation with a focus on those strategies that provide potential advantages for ADSC encapsulation, before summarizing the physical properties of hydrogel scaffolds that can act as biological cues. Finally, the challenges in the preparation and application of hydrogels with ADSCs are explored and the perspectives are proposed for the next generation of scaffolds.

Light-mediated one-pot synthesis of an ABC triblock copolymer in aqueous solution via RAFT and the effect of pH on copolymer self-assembly

We present the triblock copolymer self-assembly resulting into different morphologies that occurred during the polymerization of a hydrophobic third block in aqueous solution.

Preparation of a novel injectable in situ-gelling nanoparticle with applications in controlled protein release and cancer cell entrapment

Temperature sensitive injectable hydrogels have been used as drug/protein carriers for a variety of pharmaceutical applications. Oligo(ethylene glycol) methacrylate (OEGMA) monomers with varying ethylene oxide chain lengths have been used for the synthesis of in situ forming hydrogel. In this study, a new series of thermally induced gelling hydrogel nanoparticles (PMOA hydrogel nanoparticles) was developed by copolymerization with di(ethylene glycol) methyl ether methacrylate (MEO₂MA), poly(ethylene glycol) methyl ether methacrylate (300 g mol⁻¹, OEGMA₃₀₀), and acrylic acid (AAc). The effects of acrylic acid content on the physical, chemical, and biological properties of the nanoparticle-based hydrogels were investigated. Due to its high electrostatic properties, addition of AAc increases LCST as well as gelation temperature. Further, using Cy5-labelled bovine serum albumin and erythropoietin (Epo) as model drugs, studies have shown that the thermogelling hydrogels have the ability to tune the release rate of these proteins in vitro. Finally, the ability of Epo releasing hydrogels to recruit prostate cancer cells was assessed in vivo. Overall, our results support that this new series of thermally induced gelling systems can be used as protein control releasing vehicles and cancer cell traps.

At body temperature, thermosensitive nanoparticles release erythropoietin to lure metastatic cancer cells.

Structure and rheology of dual-associative protein hydrogels under nonlinear shear flow

Dual-associative protein di- and triblock copolymers composed of sticker-decorated midblocks and micelle-forming elastin-like polypeptide (ELP) endblocks form shear-thinning, thermoresponsively reinforceable hydrogels that are potentially useful as injectable materials for a variety of applications. Here, the combination of rheological and in situ scattering measurements under shear on these dual-associative gels is employed in order to better understand how block architecture plays a role in controlling microscopic structural rearrangement and the resulting macroscopic mechanical responses. These gels, which form a disordered sphere phase due to endblock aggregation under quiescent conditions with the midblock domains physically crosslinked by protein associations, exhibit both viscoelastic and thixotropic signatures with relative magnitudes dependent upon gel concentration and block architecture. In situ SAXS measurements during flow indicate that these thixotropic responses correspond to the development of ordered domains following start-up of shear. For both architectures, the rate of alignment increases with increasing concentration. However, the rate of domain formation when increasing the temperature from 35 to 50 °C depends on the interplay between thermoresponsive toughening of the endblocks and softening of the coiled-coil domains such that rate of rearrangement decreases in the triblock while it increases in the diblock. Following a step-down in shear flow, structural rearrangement within the samples results in a thixotropic stress response. Upon cessation of flow, gel recovery is characterized by a concentration-dependent restoration of the micellar network over time, with two timescales observed that correspond to two different length scales of network relaxation.

Volume Phase Transition Mechanism of Poly[di(ethylene glycol)ethyl ether acrylate]-Based Microgels Involving a Thermosensitive Poly(ionic liquid)

The microdynamic volume phase transition mechanism of poly[di(ethylene glycol)ethyl ether acrylate] (PDEGA)-based microgels with newly developed thermoresponsive polyionic liquid (PIL) (poly(tetrabutylphosphonium styrenesulfonate) P[P_4,4,4,4][SS]) moieties was studied by applying temperature-variable Fourier transform infrared (FTIR) spectroscopy in combination with two-dimensional correlation spectroscopy (2Dcos) and the perturbation correlation moving window (PCMW) technique. It can be found that the content of hydrophilic PIL moieties plays a significant role in the thermally induced phase transition behavior of microgel systems; namely, the microgels containing fewer PIL moieties present a sharp transition behavior and a gel-like state (10%, w/v) in water whereas the microgels with more PIL moieties undergo a slightly broad phase transition process and a flowable solution state. Herein, the C═O···D₂O-PIL hydrogen bonds as the interaction between PDEGA and P[P_4,4,4,4][SS] moieties result in a complete dehydration process for the microgels with fewer PIL moieties and the dehydrated behavior of SO₃^- groups acts as the driving force during the phase transition. As for the microgels with more PIL moieties, the whole transition process is dominated by the hydrophobic interaction of C-H groups. Even though the intermolecular hydrogen bonds (C═O···D₂O-PIL) appear as well, the more remarkable effect of the Coulombic repulsive force of PIL restrains the water molecules from breaking away, thus causing a gradual and incomplete dehydration process during heating.

Tunable Dual-Thermoresponsive Core-Shell Nanogels Exhibiting UCST and LCST Behavior

Thermoresponsive polymers change their physical properties as the temperature is changed and have found extensive use in a number of fields, especially in tissue engineering and in the development of drug delivery systems. The synthesis of a novel core-shell nanogel composed of N-isopropylacrylamide and sulfobetaine by reversible addition fragmentation chain transfer polymerization is reported. The core-shell architecture of the nanogels is confirmed using energy dispersive X-ray spectroscopy in scanning transmission electron microscopy. These nanogels exhibit dual thermoresponsive behavior, i.e., the core of the nanogel exhibits lower critical solution temperature, while the shell displays upper critical solution temperature behavior. Transition temperatures can be easily tuned by changing the molecular weight of the constituent polymer. These nanogels can be efficiently used in temperature-triggered delivery of therapeutic proteins and drugs.

Pickering high internal phase emulsions stabilized by worm-like polymeric nanoaggregates

The first worm-stabilized Pickering high internal phase emulsion (HIPE) system was developed to prepare ultra-light porous monoliths.

Radiation Engineering of Multifunctional Nanogels

Nanogels combine the favourable properties of hydrogels with those of colloids. They can be soft and conformable, stimuli-responsive and highly permeable, and can expose a large surface with functional groups for conjugation to small and large molecules, and even macromolecules. They are among the very few systems that can be generated and used as aqueous dispersions. Nanogels are emerging materials for targeted drug delivery and bio-imaging, but they have also shown potential for water purification and in catalysis. The possibility of manufacturing nanogels with a simple process and at relatively low cost is a key criterion for their continued development and successful application. This paper highlights the most important structural features of nanogels related to their distinctive properties, and briefly presents the most common manufacturing strategies. It then focuses on synthetic approaches that are based on the irradiation of dilute aqueous polymer solutions using high-energy photons or electron beams. The reactions constituting the basis for nanogel formation and the approaches for controlling particle size and functionality are discussed in the context of a qualitative analysis of the kinetics of the various reactions.

Exploration of Doubly Thermal Phase Transition Process of PDEGA-b-PDMA-b-PVCL in Water

Understanding of phase transition mechanism of thermoresponsive polymers is the basis for the rational design of smart materials with predictable properties. Linear ABC triblock terpolymer poly(di(ethylene glycol)ethyl ether acrylate)-b-poly(N,N-dimethylacrylamide)-b-poly(N-vinylcaprolactam) (PDEGA-b-PDMA-b-PVCL) was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization. The doubly thermal phase transition of PDEGA-b-PDMA-b-PVCL in aqueous solution was investigated by a combination of nuclear magnetic resonance (NMR), differential scanning calorimetry (DSC), turbidimetry, and dynamic light scattering (DLS). The terpolymer self-assembles into micelles with PDEGA being the core-forming block during the first lower critical solution temperature (LCST) transition corresponding to PDEGA, which is followed by a second LCST transition corresponding to PVCL, resulting in the formation of micellar aggregates. The PDMA middle segment plays an important role as an isolation zone to prevent cooperative dehydration of the PDEGA and PVCL segments, and therefore, two independent LCST transitions corresponding to PDEGA and PVCL were observed. Furthermore, FT-IR with perturbation correlation moving window (PCMW) and two-dimensional spectroscopy (2DCOS) was applied to elucidate the two-step phase transition mechanism of this terpolymer. It was observed that the CH, ester carbonyl, and ether groups of PDEGA change prior to the CH and amide carbonyl groups of PVCL, further supporting that the two phase transitions corresponding to PDEGA and PVCL indeed occur without mutual interferences.