Targeted β-Phase Formation in Poly(fluorene)–Ureasil Grafted Organic–Inorganic Hybrids

Co-Assembly-Driven Chiral Induction of Well-Defined Polyfluorene-block-Poly(phenyl isocyanide) and Its Enhanced Circularly Polarized Luminescence Performance

Chiral induction of polyfluorene (PF)-containing block copolymers plays a crucial role in the development of advanced functional materials; however, research in this area remains scarce. In this contribution, PFO-b-PPI diblock copolymers comprising blocks of poly(9,9-dioctylfluorene) (PFO) and poly(phenyl isocyanide) (PPI) were readily synthesized in one pot by combining chain-growth Suzuki cross-coupling polymerization of a modified 9,9-dioctylfluorene monomer with Pd(II)-catalyzed polymerization of a phenyl isocyanide monomer bearing a pentafluorophenyl ester substitute. The obtained PFO-b-PPI possessed a controlled molar mass (Mn) and narrow dispersity (Mw/Mn, Đ). Meanwhile, optically active supramolecular assemblies could be formed via coassembly of PFO-b-PPI with a chiral binaphthyl-based inducer in the film state after thermal annealing treatment, and the chirality of the supramolecular assemblies was influenced by the temperature of thermal annealing treatment, the weight ratio of the PFO-b-PPI copolymer to the chiral inducer, and the thickness of the film. Further investigations revealed that optically active supramolecular assemblies exhibited the morphology of single-handed helical nanofibers, and the helical sense of the nanofibers depended on the configuration of the binaphthyl-based inducer. Moreover, the supramolecular assemblies of helical nanofibers possessed excellent circularly polarized luminescence (CPL) performance with a glum as high as 0.11.

Aggregation-induced emission from silole-based lumophores embedded in organic-inorganic hybrid hosts

Aggregation-induced emitters - or AIEgens - are often symbolised by their photoluminescence enhancement as a result of aggregation in a poor solvent. However, for some applications, it is preferable for the AIE response to be induced in the solid-state. Here, the ability of an organic-inorganic hybrid polymer host to induce the AIE response from embedded silole-based lumophores has been explored. We have focussed on understanding how the incorporation method controls the extent of lumophore aggregation and thus the associated photophysical properties. To achieve this, two sample concentration series have been prepared, based on either the parent AIEgen 1,1-dimethyl-2,3,4,5-tetraphenylsilole (DMTPS) or the silylated analogue (DMTPS-Sil), which were physically doped or covalently grafted, respectively, to dU(600) - a member of the ureasil family of poly(oxyalkylene)/siloxane hybrids. Steady-state and time-resolved photoluminescence measurements, coupled with confocal microscopy studies, revealed that covalent grafting leads to improved dispersibility of the AIEgen, reduced scattering losses, increased photoluminescence quantum yields (up to ca. 40%) and improved chemical stability. Moreover, the ureasil also functions as a photoactive host that undergoes excitation energy transfer to the embedded DMTPS-Sil with an efficiency of almost 70%. This study highlights the potential for designing complex photoluminescent hybrid polymers exhibiting an ehanced AIE response for solid-state optical applications.

Siloxanes-Versatile Materials for Surface Functionalisation and Graft Copolymers

Siloxanes are adaptable species that have found extensive applications as versatile materials for functionalising various surfaces and as building blocks for polymers and hybrid organic-inorganic systems. The primary goal of this review is to report on and briefly explain the most relevant recent developments related to siloxanes and their applications, particularly regarding surface modification and the synthesis of graft copolymers bearing siloxane or polysiloxane segments. The key strategies for both functionalisation and synthesis of siloxane-bearing polymers are highlighted, and the various trends in the development of siloxane-based materials and the intended directions of their applications are explored.

Synthesis and characterisation of biocompatible organic-inorganic core-shell nanocomposite particles based on ureasils

Organic-inorganic core-shell nanocomposites have attracted increasing attention for applications in imaging, controlled release, biomedical scaffolds and self-healing materials. While tunable properties can readily be achieved through the selection of complementary building blocks, synergistic enhancement requires management of the core-shell interface. In this work, we report a one-pot method to fabricate hybrid core-shell nanocomposite particles (CSNPs) based on ureasils. The native structure of ureasils, which are poly(oxyalkylene)/siloxane hybrids, affords formation of an organic polymer core via nanoprecipitation, while the terminal siloxane groups act as a template for nucleation and growth of the silica shell via the Stöber process. Through optimisation of the reaction conditions, we demonstrate the reproducible synthesis of ureasil CSNPs, with a hydrodynamic diameter of ∼150 nm and polydispersity <0.2, which remain electrostatically stabilised in aqueous media for >50 days. Selective functionalisation, either through the physical entrapment of polarity-sensitive fluorescent probes (coumarin 153, pyrene) or covalent-grafting to the silica shell (fluorescein isothiocyanate) is also demonstrated and provides insight into the internal environment of the particles. Moreover, preliminary studies using a live/dead cell assay indicate that ureasil CSNPs do not display cytotoxicity. Given the simple fabrication method and the structural tunability and biocompatability of the ureasils, this approach presents an efficient route to multifunctional core-shell nanocomposite particles whose properties may be tailored for a targeted application.

Luminescent Solar Concentrators Based on Energy Transfer from an Aggregation-Induced Emitter Conjugated Polymer

Luminescent solar concentrators (LSCs) are solar-harvesting devices fabricated from a transparent waveguide that is doped or coated with lumophores. Despite their potential for architectural integration, the optical efficiency of LSCs is often limited by incomplete harvesting of solar radiation and aggregation-caused quenching (ACQ) of lumophores in the solid state. Here, we demonstrate a multilumophore LSC design that circumvents these challenges through a combination of nonradiative Förster resonance energy transfer (FRET) and aggregation-induced emission (AIE). The LSC incorporates a green-emitting poly(tetraphenylethylene), p-O-TPE, as an energy donor and a red-emitting perylene bisimide molecular dye (PDI-Sil) as the energy acceptor, within an organic-inorganic hybrid diureasil waveguide. Steady-state photoluminescence studies demonstrate the diureasil host induced AIE from the p-O-PTE donor polymer, leading to a high photoluminescence quantum yield (PLQY) of ∼45% and a large Stokes shift of ∼150 nm. Covalent grafting of the PDI-Sil acceptor to the siliceous domains of the diureasil waveguide also inhibits nonradiative losses by preventing molecular aggregation. Due to the excellent spectral overlap, FRET was shown to occur from p-O-TPE to PDI-Sil, which increased with acceptor concentration. As a result, the final LSC (4.5 cm × 4.5 cm × 0.3 cm) with an optimized donor-acceptor ratio (1:1 by wt %) exhibited an internal photon efficiency of 20%, demonstrating a viable design for LSCs utilizing an AIE-based FRET approach to improve the solar-harvesting performance.

Synthesis of Thermosensitive Conjugated Triblock Copolymers by Sequential Click Couplings for Drug Delivery and Cell Imaging

The elegant integration of an excellent light-emitting segment and a biorelevant signal-responsive moiety could generate advanced polymeric delivery systems with simultaneously favorable diagnostic and therapeutic functions with respect to cancer theranostics. Although polymeric delivery systems based on fluorescent polyfluorene (PF) or thermoresponsive poly(N-isopropylacrylamide) (PNIPAAm) have been extensively developed, the preparation of a ternary polymer formulation composed of a PF block, a PNIPAAm sequence, and a hydrophilic moiety remains rarely explored likely because of the difficulty in integrating different synthesis strategies for polymer synthesis. To this end, herein we reported the design and controlled synthesis of a PF- and PNIPAAm-based amphiphilic triblock copolymer, PF₁₁-b-PNIPAAm₁₂₀-b-poly(oligo(ethylene glycol) monomethyl ether methacrylate)₁₇ (PF₁₁-b-PNIPAAm₁₂₀-b-POEGMA₁₇), with a well-defined structure by a strategy of sequential click couplings between Suzuki-coupling-generated PF and atom-transfer radical polymerization (ATRP)-produced PNIPAAm and POEGMA. The as-prepared triblock copolymers can self-assemble into micelles with a core-shell-corona (CSC) structure that is composed of an inner hydrophobic core of the PF moiety for fluorescent tracking and drug encapsulation, a thermosensitive middle shell of PNIPAAm block for thermomodulated drug loading and release, and a hydrophilic outer corona of the POEGMA segment for micelle stabilization. Interestingly, the doxorubicin (DOX)-loaded micelles prepared at 25 °C had a greater drug loading capacity than the analogues fabricated at 37 °C due to the better stability of the former formulation, leading to its higher in vitro cytotoxicity in HeLa cells. Together with the integration of a localized hyperthermia-triggered drug release profile and efficiently intracellular trafficking of the nanocarriers by monitoring the fluorescence of the PF moiety, this formulation demonstrates a great potential for cancer theranostics.

Improved battery performance contributed by the optimized phase ratio of β and α of PVDF

Inorganic salts (LiCl) were induced to improve the ratio of β and α of PVDF by the solution method. The vibrational spectra of PVDF polymorphic polymers were obtained by Fourier transform infrared spectroscopy (FTIR), and the results showed that the ratio of β and α of pristine PVDF was elevated from 43.66% to 53.27%. A small amount of LiCl grains was detected to be decorated on the surface of LiCl-involved electrodes by the SEM and EDS tests. The rate capability of the modified samples was evaluated when charge-discharged at 5C. The capacity of the 1/10LiCl@PVDF samples remained at a high level of 71.64% when charge-discharged at 5C, which was much higher than the value of 54.66% for pristine samples. The results of the CV and EIS tests revealed that the electrochemical polarization increasing rate and charge transfer resistance of the 1/10LiCl@PVDF samples were smaller than those of the pristine PVDF samples.

Inorganic salts (LiCl) were induced to improve the ratio of β and α of PVDF by the solution method.

New Layered Polythiophene-Silica Composite Through the Self-Assembly and Polymerization of Thiophene-Based Silylated Molecular Precursors

A new layered hybrid polythiophene-silica material was obtained directly by hydrolysis and polycondensation (sol-gel) of a silylated-thiophene bifunctional precursor, and its subsequent oxidative polymerization by FeCl₃. This precursor was judiciously designed to guarantee its self-assembly and the formation of a lamellar polymer-silica structure, exploiting the cooperative effect between the hydrogen bonding interactions, originating from the ureido groups and the π-stacking interactions between the thiophene units. The lamellar structure of the polythiophene-silica composite was confirmed by X-ray powder diffraction (XRD) and transmission electron microscopy (TEM) analyses. The solid-state nuclear magnetic resonance (NMR), UV-Vis, and photoluminescence spectra unambiguously indicate the incorporation of polythiophene into the silica matrix. Our work demonstrates that using a polymerizable silylated-thiophene precursor is an efficient approach towards the formation of nanostructured conjugated polymer-based hybrid materials.

Fabrication of theranostic amphiphilic conjugated bottlebrush copolymers with alternating heterografts for cell imaging and anticancer drug delivery

We reported the first example of polyfluorene (PF)-backboned bottlebrush (bb) copolymers with alternating POEGMA/PCL hetero brushes for cancer theranostics.