Synergistic Effects of Terpolymer Regioregularity on the Performance of All-Polymer Solar Cells

A skeletal randomization strategy for high-performance quinoidal-aromatic polymers

Enhancing the solution-processability of conjugated polymers (CPs) without diminishing their thin-film crystallinity is crucial for optimizing charge transport in organic field-effect transistors (OFETs). However, this presents a classic "Goldilocks zone" dilemma, as conventional solubility-tuning methods for CPs typically yield an inverse correlation between solubility and crystallinity. To address this fundamental issue, a straightforward skeletal randomization strategy is implemented to construct a quinoid-donor conjugated polymer, PA4T-Ra, that contains para-azaquinodimethane (p-AQM) and oligothiophenes as repeat units. A systematic study is conducted to contrast its properties against polymer homologues constructed following conventional solubility-tuning strategies. An unusually concurrent improvement of solubility and crystallinity is realized in the random polymer PA4T-Ra, which shows moderate polymer chain aggregation, the highest crystallinity and the least lattice disorder. Consequently, PA4T-Ra-based OFETs, fabricated under ambient air conditions, deliver an excellent hole mobility of 3.11 cm2 V-1 s-1, which is about 30 times higher than that of the other homologues and ranks among the highest for quinoidal CPs. These findings debunk the prevalent assumption that a random polymer backbone sequence results in decreased crystallinity. The considerable advantages of the skeletal randomization strategy illuminate new possibilities for the control of polymer aggregation and future design of high-performance CPs, potentially accelerating the development and commercialization of organic electronics.

Efficient and Nonhalogenated Solvent-Processed Organic Solar Cells Enabled by Conjugated Donor-Acceptor Block Copolymers Containing the Same Benzodithiophene Unit

Organic solar cells (OSCs) based on conjugated block copolymers (CBCs) have gained considerable attention owing to their simple one-pot solution process. However, their power conversion efficiencies (PCEs) require significant improvement. Furthermore, the majority of efficient CBC-based OSCs are processed using environmentally toxic halogenated solvents. Herein, we develop a new CBC (PBDB-T-b-PY5BDT) and demonstrate efficient and stable OSCs achieved by a halogen-free solution process. We design a (D₁-A₁)-b-(D₁-A₂)-type CBC (PBDB-T-b-PY5BDT) that shares the same benzodithiophene (BDT) units in donor and acceptor blocks. This alleviates unfavorable molecular interactions between the blocks at their interfaces. The PBDB-T-b-PY5BDT-based devices exhibit a high PCE (10.55%), and they show good mechanical, thermal, and storage stabilities. Importantly, we discuss the potential of our OSCs by preparing two different control systems: one based on a binary polymer blend (PBDB-T:PY5BDT) and another based on a conjugated random copolymer (CRC, PBDB-T-r-PY5BDT). We demonstrate that the photovoltaic performance, device stability, and mechanical robustness of the CBC-based OSCs exceed those of the binary all-polymer solar cells and CRC-based OSCs.

Intrinsically Stretchable, Highly Efficient Organic Solar Cells Enabled by Polymer Donors Featuring Hydrogen-Bonding Spacers

Intrinsically stretchable organic solar cells (IS-OSCs), consisting of all stretchable layers, are attracting significant attention as a future power source for wearable electronics. However, most of the efficient active layers for OSCs are mechanically brittle due to their rigid molecular structures designed for high electrical and optical properties. Here, a series of new polymer donors (P_D s, PhAmX) featuring phenyl amide (N¹ ,N³ -bis((5-bromothiophen-2-yl)methyl)isophthalamide, PhAm)-based flexible spacer (FS) inducing hydrogen-bonding (H-bonding) interactions is developed. These P_D s enable IS-OSCs with a high power conversion efficiency (PCE) of 12.73% and excellent stretchability (PCE retention of >80% of the initial value at 32% strain), representing the best performances among the reported IS-OSCs to date. The incorporation of PhAm-based FS enhances the molecular ordering of P_D s as well as their interactions with a Y7 acceptor, enhancing the mechanical stretchability and electrical properties simultaneously. It is also found that in rigid OSCs, the PhAm5:Y7 blend achieves a much higher PCE of 17.5% compared to that of the reference PM6:Y7 blend. The impact of the PhAm-FS linker on the mechanical and photovoltaic properties of OSCs is thoroughly investigated.

Material Design and Device Fabrication Strategies for Stretchable Organic Solar Cells

Recent advances in the power conversion efficiency (PCE) of organic solar cells (OSCs) have greatly enhanced their commercial viability. Considering the technical standards (e.g., mechanical robustness) required for wearable electronics, which are promising application platforms for OSCs, the development of fully stretchable OSCs (f-SOSCs) should be accelerated. Here, a comprehensive overview of f-SOSCs, which are aimed to reliably operate under various forms of mechanical stress, including bending and multidirectional stretching, is provided. First, the mechanical requirements of f-SOSCs, in terms of tensile and cohesion/adhesion properties, are summarized along with the experimental methods to evaluate those properties. Second, essential studies to make each layer of f-SOSCs stretchable and efficient are discussed, emphasizing strategies to simultaneously enhance the photovoltaic and mechanical properties of the active layer, ranging from material design to fabrication control. Key improvements to the other components/layers (i.e., substrate, electrodes, and interlayers) are also covered. Lastly, considering that f-SOSC research is in its infancy, the current challenges and future prospects are explored.

Efficient Optoelectronic Devices Enabled by Near-Infrared Organic Semiconductors with a Photoresponse beyond 1050 nm

Organic optoelectronic devices exhibit distinctive photoresponse to the near-infrared (NIR) light and show great potential in many fields. However, the optoelectronic properties of the existing devices hardly meet the technical requirements of new applications such as energy conversion and health sensing, thus raising the demand to develop high-performance NIR organic semiconductors. To address this issue, a new NIR material, namely, BFIC, is designed and synthesized by inserting fluorothieno[3,4-b]thiophene (FTT) as a π-bridge. Since the introduction of FTT can extend the conjugation, stabilize the quinoid resonant structure, and enhance the intramolecular charge transfer, BFIC displays a broad and intense absorption in the NIR region, ranging from 700 to 1050 nm. As a result, the organic solar cell based on BFIC and a polymer donor PTB7-Th realizes a power conversion efficiency of 10.38%. The semitransparent organic solar cell (OSC) shows a power conversion efficiency of 6.15%, accompanied by an average visible transmittance of 38.79% due to the selective photoresponse in the NIR range. The organic photodetector based on PTB7-Th:BFIC delivers a broad spectral response ranging from 330 to 1030 nm with a specific detectivity over 10¹³ Jones under the self-powered mode, which is one of the highest detectivities among the broad-band organic photodetectors.

A regioregular donor-acceptor copolymer allowing a high gain-bandwidth product to be obtained in photomultiplication-type organic photodiodes

Obtaining a photomultiplication-type organic photodiode with a high gain-bandwidth product is challenging. We show that a newly designed regioregular polymer enables the formation of a highly oriented face-on structure with a low trap density, leading to a high EQE and a fast response time. As a result, a gain-bandwidth product of over 4 × 10⁵ Hz is achieved.

Influence of Backbone Regioregularity on High-Mobility Conjugated Polymers Based on Alkylated Dithienylacrylonitrile

We designed and synthesized two donor-acceptor type conjugated polymers, the regioirregular polymer RI-PDPP-CNTVT-6 and its regioregular counterpart RR-PDPP-CNTVT-6, based on diketopyrrolopyrrole (DPP) and alkylated dithienylacrylonitrile (CNTVT) units. Among them, the 2-decyltetradecyl side chain on the DPP acceptor unit and the hexyl side chain on the CNTVT donor unit were used to ensure enough solubility for them. The backbone regioregularity was used to tune electronic structures and carrier transport of the conjugated system. The two conjugated polymers were characterized for their thermal, photophysical, electrochemical, and solution-processable properties, thin-film microstructures, and morphologies. The top-gate bottom-contact configuration organic field-effect transistor (OFET) devices based on these two conjugated polymers showed excellent ambipolar performances. Remarkably, the regioirregular polymer RI-PDPP-CNTVT-6 exhibited higher charge-carrier mobilities than the regioregular counterpart polymer RR-PDPP-CNTVT-6 did, as their highest hole/electron mobilities (μ_hmax/μ_emax) were 1.48/1.27 and 0.48/0.052 cm² V^-1 s^-1, respectively. Moreover, the influence of backbone regioregularity on its thermal stability, electrochemical and photophysical properties, solution processability, and charge-carrier mobility was intensively studied. Our results afforded a promising pathway toward the development of excellent ambipolar OFETs with high performance, good solution processability, and thermal stability.

Isomerically Pure Benzothiophene-Incorporated Acceptor: Achieving Improved Voc and Jsc of Nonfullerene Organic Solar Cells via End Group Manipulation

Benzene-based 1,1-dicyanomethylene-3-indanone (IC) derivatives have been widely utilized as the end-group to construct acceptor-donor-acceptor type nonfullerene acceptors (A-D-A type NFAs). The extension of the end-group conjugation of nonfullerene acceptors (NFAs) is a rational strategy to facilitate intermolecular stacking of the end-groups which are responsible for efficient electron transportation. A bicyclic benzothiophene-based end-group acceptor, 2-(3-oxo-2,3-dihydro-1H-benzo[b]cyclopenta[d]thiophen-1-ylidene)malononitrile, denoted as α-BC was designed and synthesized. The Knoevenagel condensation of the unsymmetrical 1,3-diketo-precursor with one equivalent of malononitrile selectively reacts with the keto group attached at the α-position of the thiophene unit, leading to the isomerically pure benzothiophene-fused α-BC. The well-defined α-BC with extended conjugation was condensed with three different ladder-type diformylated donors to form three new A-D-A NFAs named BDCPDT-BC, DTCC-BC, and ITBC, respectively. The corresponding IC-based BDCPDT-IC, DTCC-IC, and ITIC model compounds were also synthesized for comparison. The incorporation of the electron-rich benzothiophene unit in the end-group upshifts the lowest unoccupied molecular orbital energy levels of the NFAs, which beneficially enlarges the V_oc values. On the other hand, the benzothiophene unit in α-BC not also imparts an optical transition in the shorter wavelengths around 340-400 nm for a better light harvesting ability but also promotes the antiparallel π-π stacking of the end-groups for efficient electron transport. The organic photovoltaic cell devices using a PBDB-T polymer and BC-based NFAs all showed the improved V_oc and J_sc values. The BDCPDT-BC- and DTCC-BC-based devices exhibited a power conversion efficiency (PCE) of 10.82 and 10.74%, respectively, which outperformed the corresponding BDCPDT-IC-, and DTCC-IC-based devices (9.33 and 9.25%). More importantly, the ITBC-based device delivered the highest PCE of 12.07% with a J_sc of 19.90 mA/cm², a V_oc of 0.94 V, and an fill factor of 64.51%, representing a 14% improvement relative to the traditional ITIC-based device (10.05%).