Impact of Polymer Type on Thermal Degradation of Amorphous Solid Dispersions Containing Ritonavir

Impact of HPMCAS Grade on the Release of Weakly Basic Drugs from Amorphous Solid Dispersions

Oppositely charged species can form electrostatic interactions in aqueous solution, and these may lead to reduced solubility of the interacting components. Herein, insoluble complex formation between the lipophilic weakly basic drugs, cinnarizine or loratadine, and the enteric polymer, hydroxypropyl methylcellulose acetate succinate (HPMCAS), was studied and used to better understand drug and polymer release from their corresponding amorphous solid dispersions (ASDs). Surface area normalized release experiments were performed at various pH conditions for three different grades of HPMCAS, LF, MF and HF, as well as their ASDs. Both polymer and drug release rates were measured for the ASDs. Complexation tendency was evaluated by measuring the extent of polymer loss from the aqueous phase in the presence of the drug. Results showed that release from ASDs with HPMCAS-LF was less impacted by the presence of a cationic form of the drug than ASDs prepared with the HF grade. Furthermore, an increase in pH, leading to a reduction in the extent of ionized drug also led to an improvement in release rate. These observations provide a baseline to understand the role of drug-polymer electrostatic interactions on release from ASDs formulated with HPMCAS. Future studies should focus on adding complexity to media conditions by employing simulated intestinal fluids with solubilizing components.

Dissolution of copovidone-based amorphous solid dispersions: Influence of atomic layer coating, hydration kinetics, and formulation

Atomic layer coating (ALC) is an emerging, solvent-free technique to coat amorphous solid dispersion (ASD) particles with a nanolayer ceramic coating that has been shown to improve powder characteristics and limit drug crystallization. Herein, we evaluate the impact of aluminum oxide coatings with varying thickness and conformality on the release behavior of ritonavir/copovidone ASDs. Release performance of powders, neat tablets, and formulated tablets was studied. Confocal fluorescence microscopy (CFM) was used to visualize particle hydration and phase separation during immersion of the ASD in aqueous media. CFM revealed particle hydration requires defects for solvent penetration, but coatings, regardless of thickness, had minor impacts on powder dissolution provided defects were present. In tablets where less surface area is exposed to the dissolution media due to gel formation, slowed hydration kinetics resulted in phase separation of the drug from the polymer in coated samples, limiting release. Formulation with two superdisintegrants, crospovidone and croscarmellose sodium, as well as lactose achieved ∼90% release in less than 10 minutes, matching the uncoated ASD particles of the same formulation. This study highlights the importance of hydration rate, as well as the utility of confocal fluorescence microscopy to provide insight into release and phase behavior of ASDs.

Role of rheology in formulation and process design of hot melt extruded amorphous solid dispersions

Hot melt extrusion (HME) has been widely used as a continuous and highly flexible pharmaceutical manufacturing process for the production of a variety of dosage forms. In particular, HME enables preparation of amorphous solid dispersions (ASDs) which can improve bioavailability of poorly water-soluble drugs. The rheological properties of drug-polymer mixtures can significantly influence the processability of drug formulations via HME and eventually the end-use product properties such as physical stability and drug release. The objective of this review is to provide an overview of various rheological techniques and properties that can be used to evaluate the flow behavior and processability of the drug-polymer mixtures as well as formulation characteristics such as drug-polymer interactions, miscibility/solubility, and plasticization to improve the HME processability. An overview of the thermodynamics and kinetics of ASD processing by HME is also provided, as well as aspects of scale-up and process modeling, highlighting rheological properties on formulation design and process development. Overall, this review provides valuable insights into critical rheological properties which can be used as a predictive tool to optimize the HME processing conditions.

Trends in amorphous solid dispersion drug products approved by the U.S. Food and Drug Administration between 2012 and 2023

Forty-eight (48) drug products (DPs) containing amorphous solid dispersions (ASDs) have been approved by the U.S. Food and Drug Administration in the 12-year period between 2012 and 2023. These DPs comprise 36 unique amorphous drugs. Ten (10) therapeutic categories are represented, with most DPs containing antiviral and antineoplastic agents. The most common ASD polymers are copovidone (49%) and hypromellose acetate succinate (30%), while spray drying (54%) and hot melt extrusion (35%) are the most utilized manufacturing processes to prepare the ASD drug product intermediate (DPI). Tablet dosage forms are the most common, with several capsule products available. Line extensions of several DPs based on flexible oral solids and powders for oral suspension have been approved which provide patient-centric dosing to pediatric and other patient populations. The trends in the use of common excipients and film coating types are discussed. Eighteen (18) DPs are fixed-dose combinations, and some contain a mixture of amorphous and crystalline drugs. The DPs have dose/unit of amorphous drug ranging from <5 mg up to 300 mg, with the majority being ≤100 mg/unit. This review details several aspects of DPI and DP formulation and manufacturing of ASDs, as well as trends related to therapeutic category, dose, and patient-centricity.

Development and characterization of solid lipid-based formulations (sLBFs) of ritonavir utilizing a lipolysis and permeation assay

As a high number of active pharmaceutical ingredients (APIs) under development belong to BCS classes II and IV, the need for improving bioavailability is critical. A powerful approach is the use of lipid-based formulations (LBFs) that usually consist of a combination of liquid lipids, cosolvents, and surfactants. In this study, ritonavir loaded solid LBFs (sLBFs) were prepared using solid lipid excipients to investigate whether sLBFs are also capable of improving solubility and permeability. Additionally, the influence of polymeric precipitation inhibitors (PVP-VA and HPMC-AS) on lipolysis triggered supersaturation and precipitation was investigated. One step intestinal digestion and bicompartmental permeation studies using an artificial lecithin-in-dodecane (LiDo) membrane were performed for each formulation. All formulations presented significantly higher solubility (5 to >20-fold higher) during lipolysis and permeation studies compared to pure ritonavir. In the combined lipolysis-permeation studies, the formulated ritonavir concentration increased 15-fold in the donor compartment and the flux increased up to 71 % as compared to non-formulated ritonavir. The formulation with the highest surfactant concentration showed significantly higher ritonavir solubility compared to the formulation with the highest amount of lipids. However, the precipitation rates were comparable. The addition of precipitation inhibitors did not influence the lipolytic process and showed no significant benefit over the initial formulations with regards to precipitation. While all tested sLBFs increased the permeation rate, no statistically significant difference was noted between the formulations regardless of composition. To conclude, the different release profiles of the formulations were not correlated to the resulting flux through a permeation membrane, further supporting the importance of making use of combined lipolysis-permeation assays when exploring LBFs.

Elucidation of Molecular Interactions Between Drug-Polymer in Amorphous Solid Dispersion by a Computational Approach Using Molecular Dynamics Simulations

Introduction

Amorphous drug dispersion is frequently used to enhance the solubility and dissolution of poorly water-soluble drugs, thereby improving their oral bioavailability. The dispersion of these drugs into polymer matrix can inhibit their recrystallization. The inter-molecular interactions between drug and polymer plays a role in the improvement of the dissolution rate, solubility, and physical stability of drug.

Aim

This study aims to investigate the formation and interactions of ritonavir (RTV)/poloxamer (PLX) amorphous formulation using a computational approach via molecular dynamics (MD) simulations, which mimicked solvent evaporation and melt-quenching method.

Methods

TheRoot Mean Square Deviation (RMSD) value, Root Mean Square Fluctuation (RMSF), Radial Distribution Function (RDF), Radius of Gyration (Rg), Solvent Accessible Surface Area (SASA), and hydrogen bond interactions were analyzed to determine interaction mechanisms between RTV and PLX in amorphous solid dispersion.

Results

The pi-alkyl bonds between RTV and PLX were formed after simulations of solvent evaporation, while the hydrogen bond interactions of RTV-PLX was observed during melt method simulations. These results indicate the successful formulation of amorphous solid dispersion (ASD) from RTV and PLX. The RMSD values obtained from the solvent evaporation, melt-cooling-A, melt-cooling-B, and melt-cooling-C methods were 3.33 Å, 1.97 Å, 1.30 Å, and 1.29 Å, respectively, while the average RMSF values were 2.65 Å, 1.04 Å, 1.05 Å, and 1.07 Å, respectively. This indicates that the suppression of translational motion of RTV from the melt method can be stronger than solvent evaporation caused by the intermolecular interactions of RTV-PLX.

Conclusion

MD simulations helped in understanding the formation and interaction mechanisms of ASD formulations that were difficult to detect by experimental approaches.

Material-Sparing Feasibility Screening for Hot Melt Extrusion

Hot melt extrusion (HME) offers a high-throughput process to manufacture amorphous solid dispersions. A variety of experimental and model-based approaches exist to predict API solubility in polymer melts, but these methods are typically aimed at determining the thermodynamic solubility and do not take into account kinetics of dissolution or the associated degradation of the API during thermal processing, both of which are critical considerations in generating a successful amorphous solid dispersion by HME. This work aims to develop a material-sparing approach for screening manufacturability of a given pharmaceutical API by HME using physically relevant time, temperature, and shear. Piroxicam, ritonavir, and phenytoin were used as model APIs with PVP VA64 as the dispersion polymer. We present a screening flowchart, aided by a simple custom device, that allows rapid formulation screening to predict both achievable API loadings and expected degradation from an HME process. This method has good correlation to processing with a micro compounder, a common HME screening industry standard, but only requires 200 mg of API or less.

Advances in the development of amorphous solid dispersions: The role of polymeric carriers

Amorphous solid dispersion (ASD) is one of the most effective approaches for delivering poorly soluble drugs. In ASDs, polymeric materials serve as the carriers in which the drugs are dispersed at the molecular level. To prepare the solid dispersions, there are many polymers with various physicochemical and thermochemical characteristics available for use in ASD formulations. Polymer selection is of great importance because it influences the stability, solubility and dissolution rates, manufacturing process, and bioavailability of the ASD. This review article provides a comprehensive overview of ASDs from the perspectives of physicochemical characteristics of polymers, formulation designs and preparation methods. Furthermore, considerations of safety and regulatory requirements along with the studies recommended for characterizing and evaluating polymeric carriers are briefly discussed.

Impact of Aluminum Oxide Nanocoating on Drug Release from Amorphous Solid Dispersion Particles

Atomic layer coating (ALC) is emerging as a particle engineering strategy to inhibit surface crystallization of amorphous solid dispersions (ASDs). In this study, we turn our attention to evaluating drug release behavior from ALC-coated ASDs, and begin to develop a mechanistic framework. Posaconazole/hydroxypropyl methylcellulose acetate succinate was used as a model system at both 25% and 50% drug loadings. ALC-coatings of aluminum oxide up to 40 nm were evaluated for water sorption kinetics and dissolution performance under a range of pH conditions. Scanning electron microscopy with energy dispersive X-ray analysis was used to investigate the microstructure of partially released ASD particles. Coating thickness and defect density (inferred from deposition rates) were found to impact water sorption kinetics. Despite reduced water sorption kinetics, the presence of a coating was not found to impact dissolution rates under conditions where rapid drug release was observed. Under slower releasing conditions, underlying matrix crystallization was reduced by the coating, enabling greater levels of drug release. These results demonstrate that water was able to penetrate through the ALC coating, hydrating the amorphous solid, which can initiate dissolution of drug and/or polymer (depending on pH conditions). Swelling of the ASD substrate subsequently occurs, disrupting and cracking the coating, which serves to facilitate rapid drug release. Water sorption kinetics are highlighted as a potential predictive tool to investigate the coating quality and its potential impact on dissolution performance. This study has implications for formulation design and evaluation of ALC-coated ASD particles.

Hydroxypropyl methylcellulose acetate succinate as an exceptional polymer for amorphous solid dispersion formulations: A review from bench to clinic

Amorphous solid dispersions (ASDs) are a proven system for achieving a supersaturated state of drug, in which the concentration of drug is greater than its crystalline solubility. The usage of Hydroxypropyl Methylcellulose Acetate Succinate (HPMCAS) in the development of ASDs has grown significantly, as evidenced by the fact that majority of commercially approved ASD formulations are based on HPMCAS. HPMCAS has been widely utilized as a solubility enhancer and precipitation inhibitor or stabilizer to achieve supersaturation and inhibit crystallization of drugs in the gastrointestinal tract. The characteristics of HPMCAS ASDs such as less hygroscopic, strong drug-polymer hydrophobic interactions, high solubilization efficiency, greater potential to generate, maintain drug supersaturation and crystallization inhibition outperform other polymeric carriers in ASD development. Furthermore, combining HPMCAS with other polymers or surfactants as ternary ASDs could be a viable approach for enhancing oral absorption of poorly soluble drugs. This review discusses the concepts of supersaturation maintenance or precipitation inhibition of HPMCAS in the ASD formulations. In addition, the mechanisms underlying for improved dissolution performance, oral bioavailability and stability of HPMCAS ASDs are explored.