Functional Ordered Mesoporous Materials: Present and Future

Surfactant-Assisted Construction of Covalent Organic Frameworks

Covalent organic frameworks (COFs), characterized by their unique ordered pore structures, chemical diversity, and high degree of designability, have demonstrated immense application potential across multiple fields. However, traditional synthesis methods often encounter challenges such as low crystallinity and uneven morphology. The introduction of surfactants has opened up new pathways for the synthesis of COFs. Leveraging their intermolecular interactions and self-assembly properties, surfactants can effectively regulate the nucleation, growth processes, and ultimate structure and properties of COFs. This paper systematically reviews the latest research achievements and future trends in surfactant-assisted COF synthesis, emphasizing the crucial role of surfactants as key additives in the preparation of COFs. Surfactants not only facilitate uniform nucleation and growth of COFs, enhancing the crystallinity and structural order of the products but also enable precise and diverse regulation of the dimensionality, morphology, and structure of COFs. Furthermore, by influencing the dispersion and processability of COFs, surfactants enhance their practicality and workability. Finally, the paper presents some prospects for the challenges and future opportunities in this emerging research area.

Selective Design of Mesoporous Bi2Se3 Films with Orthorhombic and Rhombohedral Crystals

Materials with the same chemical composition can exhibit distinct properties depending on their crystal phases. Here, the synthesis of two types of mesoporous Bi2Se3 films at different reduction potentials is reported and their application in electrochemical glucose sensing. Mesoporous Bi2Se3 is synthesized by incorporating block copolymer micelle assemblies into the deposition solution and applying a reduction potential. To characterize the crystal phases accurately, Bi2Se3 films are heat-treated at 200 °C for 1 h in a nitrogen atmosphere. The results reveal that the Bi2Se3 films synthesized under different conditions exhibit clearly distinct phases: rhombohedral (R-Bi2Se3) and orthorhombic (O-Bi2Se3). The R-Bi2Se3-8 nm, featuring 8 nm pores and synthesized at a more negative reduction potential, outperforms its nonporous counterpart, achieving a glucose sensing sensitivity of 0.143 µA cm-2 µM-1 and a detection limit of 6.2 µM at pH 7.4 in 0.1 M phosphate-buffered saline solution. In contrast, the O-Bi2Se3, prepared at a relatively positive potential, exhibits no glucose-sensing activity. The inactivity of O-Bi2Se3 for glucose oxidation is likely due to the energetically unfavorable intermediates, as predicted by density functional theory calculations. These findings underscore the critical role of crystal phase control in porous nanomaterials and pave the way for developing innovative porous systems.

Nanoporous Plasmonic Microneedle Arrays Induced High-Efficiency Intracellular Delivery of Metabolism Regulating Protein

Patterned micro/nanostructure arrays have shown the potential to effectively regulate cellular behavior, and their unique microstructure may address the limitations of conventional pore materials, leading to novel phenomena. In this work, a large-area gold micro/nano-array substrate with an average hole of ≈32 nm is designed and extensively screened. Precisely engineered nanopores on the substrate can effectively improve photothermal conversion efficiency, and instant heat dissipation in the absence of laser irradiation. The mesoporous arrays are fabricated by hybrid lithography, offering advantages such as simple processing, high reproducibility, and immense commercial potential. Notably, its heating rate is as rapid as ≈45 K µs-1 at low power levels, with the cooling duration reduced to ≈50 µs after the laser irradiation. Metabolism regulatory proteins such as cytochrome C (CytoC) and β-galactosidase (β-gal) can be efficiently introduced into the U87 cell model without inducing phototoxicity or protein inactivation, maintaining catalytic activity to modulate the cellular metabolic state. This delivery platform based on transient nano-cyclones stimulating cell perturbations can be further expanded through modulated microstructures, such as delivering functional proteins or biomolecules for efficient intracellular regulation, cellular transfection, and in the future application as a potential high-throughput screening tool for clustered regularly interspaced short palindromic repeats (CAR-T) biopharmaceutical and clustered regularly interspaced short palindromic repeats (CRISPR) technologies.

Elucidating Mesostructural Effects on Thermal Conductivity for Enhanced Insulation Applications

Thermal management is a key link in improving energy utilization and preparing insulation materials with excellent performance is the core technological issue. Complex and irregular pore structures of insulation materials hinder the exploration of structure-property relationships and the further promotion of material performance. Ordered mesoporous silica (OMS) is a kind of porous material with ordered frameworks. This work elucidates the effects of ordered porous architecture on the thermal conductivity of mesoporous silica. Herein, two typical OMS, SBA-15 and SBA-16, characterized by well-defined porous structures with distinct spatial orientations are synthesized to study the relevance between structure and thermal conductivity. Compared to the 3D cubic mesoporous structure of SBA-16, the 2D hexagonal structure of SBA-15 exhibits anisotropic effects that restrict both solid and gaseous conduction, thereby providing better thermal insulating. Due to the influence of porosity, the thermal conductivity is found to decrease strongly with increasing pore size and decreasing wall thickness. Moreover, OMS composite aerogels with outstanding thermal insulation, mechanical performance, and hydrophobicity are fabricated through incorporating OMS into cellulose nanofibers (CNF). Consequently, this work contributes to a deeper understanding of heat transfer in OMS and provides an idea for designing OMS-based composite materials, thereby advancing their potential applications.

Molecular Mechanism Behind the Capture of Fluorinated Gases by Metal-Organic Frameworks

Fluorinated gases (F-gases) play a vital role in the chemical industry and in the fields of air conditioning, refrigeration, health care, and organic synthesis. However, the direct emission of waste gases containing F-gases into the atmosphere contributes to greenhouse effects and generates toxic substances. Developing porous materials for the energy-efficient capture, separation, and recovery of F-gases is highly desired. Recently, as a highly designable porous adsorbents, metal-organic frameworks (MOFs) exhibit excellent selective sorption performance toward F-gases, especially for the recognition and separation of different F-gases with highly similar properties, showing their great potential in F-gases control and recovery. In this review, we discuss the capture and separation of F-gases and their azeotropic, near-azeotropic, and isomeric mixtures in various application scenarios by MOFs, specifically classify and analyze molecular interaction between F-gases and MOFs, and interpret the mechanisms underlying their high performance regarding both adsorption capacity and selectivity, providing a repertoire for future materials design. Challenges faced in the transformation research roadmap of MOFs adsorbent separation technologies toward F-gases are also discussed, and areas for future research endeavors are highlighted.

High-throughput centrifugal evaporation for mesoporous alumina powder synthesis via evaporation-induced self-assembly (EISA)

The evaporation-induced self-assembly (EISA) process is commonly employed to synthesise mesoporous materials, such as mesoporous alumina. Typically, recovering mesoporous alumina in powder form takes several days due to the need for controlled solvent evaporation conditions. The mesostructure obtained from the EISA process is highly sensitive to these conditions, which can sometimes hinder reproducibility. This paper presents an improved EISA method using a centrifugal evaporator, which enables the rapid recovery of mesoporous alumina powder (approximately 2 h) from multiple precursor solutions under controlled evaporation conditions. The advantages of using a centrifugal evaporator over traditional vacuum evaporation methods include: (1) the reduction of bumping and foaming due to centrifugal force; (2) resistance to evaporated gaseous HCl; and (3) the ability to evaporate multiple samples simultaneously. This enhanced EISA process is expected to accelerate the research progress of powdery mesoporous materials.

Multidimensionally ordered mesoporous intermetallics: Frontier nanoarchitectonics for advanced catalysis

Ordered intermetallics contribute to a unique class of catalyst materials due to their rich atomic features. Further engineering of ordered intermetallics at a mesoscopic scale is of great importance to expose more active sites and introduce new functions. Recently, multidimensionally ordered mesoporous intermetallic (MOMI) nanoarchitectonics, which subtly integrate atomically ordered intermetallics and mesoscopically ordered mesoporous structures, have held add-in synergies that not only enhance catalytic activity and stability but also optimize catalytic selectivity. In this tutorial review, we have summarized the latest progress in the rational design, targeted synthesis, and catalytic applications of MOMIs, with a special focus on the findings of our group. Three strategies, including concurrent template route, self-template route, and dealloying route, are discussed in detail. Furthermore, physicochemical properties and catalytic performances for several important reactions are also described to highlight the remarkable activity, high stability, and controllable selectivity of MOMI nanoarchitectonics. Finally, we conclude with a summary and explore future perspectives in the field to contribute to wider applications.

Chlorophenols in environment: Recent updates on pretreatment and analysis methods

Chlorophenols (CPs) are widely used in industries such as petrochemicals, insecticides, pharmaceuticals, synthetic dyes and wood preservatives. However, owing to the improper discharge and disposal, they have become major contaminants that are ubiquitously distributed in water, soil, and sewage sediments, posing a significant threat to ecosystems and human health. Consequently, accurate, sensitive and effective pretreatment and analysis methods for CPs are urgently required and have been actively explored in recent years. This review encompasses the pretreatment and detection methods for CPs in environmental samples from 2010 to 2024. The pretreatment methods for CPs primarily include solid-phase extraction, liquid-liquid extraction, solid-phase microextraction, liquid-phase microextraction, and QuEChERS. These methods are evolving towards more effective and environmentally friendly technologies, such as the miniaturization and automation of equipment, the development of innovative materials (including graphene, molecularly imprinted polymers, layered double hydroxides, porous organic polymers, and porous carbon), and the use of green solvents like deep eutectic solvents. Detection methods emphasize liquid chromatography-mass spectrometry, gas chromatography-mass spectrometry, sensors, and capillary electrophoresis. Advances in chromatographic columns, novel ion sources, and high-resolution mass spectrometry have significantly improved detection performance. In addition, the pros and cons of diverse techniques, critical comments and future perspectives are elaborated.

Polyphenol-Based Bicontinuous Porous Spheres Via Amine-Mediated Polymerization-Induced Fusion Assembly

Bicontinuous porous materials, which possess 3D interconnected network and pore channels facilitating the mass diffusion to the interior of materials, have demonstrated their promising potentials in a large variety of research fields. However, facile construction of such complex and delicate structures is still challenging. Here, an amine-mediated polymerization-induced fusion assembly strategy is reported for synthesizing polyphenol-based bicontinuous porous spheres with various pore structures. Specifically, the fusion of pore-generating template observed by TEM promotes the development of bicontinuous porous networks that are confirmed by 3D reconstruction. Furthermore, the resultant bicontinuous porous carbon particles after pyrolysis, with a diameter of ≈600 nm, a high accessible surface area of 359 m2 g-1, and a large pore size of 40-150 nm manifest enhanced performance toward the catalytic degradation of sulfamethazine in water decontamination. The present study expands the toolbox of interfacial tension-solvent-dependent porous spheres while providing new insight into their structure-property relationships.

A review of intact glycopeptide enrichment and glycan separation through hydrophilic interaction liquid chromatography stationary phase materials

Protein glycosylation, one of the most important biologically relevant post-translational modifications for biomarker discovery, faces analytical challenges due to heterogeneous glycosite, diverse glycans, and mass spectrometry limitations. Glycopeptide enrichment by removing abundant hydrophobic peptides helps overcome some of these obstacles. Hydrophilic interaction liquid chromatography (HILIC), known for its selectivity, glycan separations, intact glycopeptide enrichment, and compatibility with mass spectrometry, has seen recent advancements in stationary phases like Amide-80, glycoHILIC, amino acids or peptides for improved HILIC-based glycopeptide analysis. Utilization of these materials can improve glycopeptide enrichment through solid-phase extraction and separation via high-performance liquid chromatography. Additionally, using glycopeptides themselves to modify HILIC stationary phases holds promise for improving selectivity and sensitivity in glycosylation analysis. Additionally, HILIC has capability to assess the information about glycosites and structural information of glycans. This review summarizes recent breakthroughs in HILIC stationary materials, highlighting their impact on glycopeptide analysis. Ongoing research on advanced materials continues to refine HILIC's performance, solidifying its value as a tool for exploring protein glycosylation.

Incorporation of Hydroquinone in the Synthesis of Bi2Ti2O7-TiO2 Contributes to Higher Efficiency of Hydroquinone Degradation: Preparation, Characterization, and Photocatalytic Mechanism

In this paper, Bi-doped hydroquinone (HDQ) molecularly imprinted TiO2 (Bi-HDQ-TiO2) with the synthesis of Bi2Ti2O7-TiO2 as the main ingredient was developed. Using HDQ as an imprinted molecule, Bi(NO3)3-5H2O was introduced into the synthesis of Bi-HDQ-TiO2, which revealed that bismuth oxide was protected by HDQ in the temperature range of 0-450 °C, and during the gradual increase of the temperature up to 550 °C, the HDQ eluted completely, then the surrounding TiO2 was nucleated by bismuth oxide and bonded with the bismuth oxide, causing all of them to be transformed into Bi2Ti2O7. The excited electrons of the catalyst could be transported efficiently in various surface interfaces, meanwhile inhibiting the complexation of photogenerated carriers, thereby improving the efficiency of photocatalysis. A degradation efficiency of 96.35% of HDQ was achieved under 30 min UV irradiation, indicating that the candidate material has a promising future application in environmental purification or human health.

Mesoporous silica thin film as effective coating for enhancing osteogenesis through selective protein adsorption and blood clotting

The role of blood clots in tissue repair has been identified for a long time; however, its participation in the integration between implants and host tissues has attracted attention only in recent years. In this work, a mesoporous silica thin film (MSTF) with either vertical or parallel orientation was deposited on titania nanotubes surface, resulting in superhydrophilic nanoporous surfaces. A proteomic analysis of blood plasma adsorption revealed that the MSTF coating could significantly increase the abundance of acidic proteins and the adsorption of coagulation factors (XII and XI), with the help of cations (Na+, Ca2+) binding. As a result, both the activation of platelets and the formation of blood clots were significantly enhanced on the MSTF surface with more condensed fibrin networks. The two classical growth factors of platelets-derived growth factors-AB and transformed growth factors-βwere enriched in blood clots from the MSTF surface, which accounted for robust osteogenesis bothin vitroandin vivo. This study demonstrates that MSTF may be a promising coating to enhance osteogenesis by modulating blood clot formation.

Metal Atom-Support Interaction in Single Atom Catalysts toward Hydrogen Peroxide Electrosynthesis

Single metal atom catalysts (SACs) have garnered considerable attention as promising agents for catalyzing important industrial reactions, particularly the electrochemical synthesis of hydrogen peroxide (H2O2) through the two-electron oxygen reduction reaction (ORR). Within this field, the metal atom-support interaction (MASI) assumes a decisive role, profoundly influencing the catalytic activity and selectivity exhibited by SACs, and triggers a decade-long surge dedicated to unraveling the modulation of MASI as a means to enhance the catalytic performance of SACs. In this comprehensive review, we present a systematic summary and categorization of recent advancements pertaining to MASI modulation for achieving efficient electrochemical H2O2 synthesis. We start by introducing the fundamental concept of the MASI, followed by a detailed and comprehensive analysis of the correlation between the MASI and catalytic performance. We describe how this knowledge can be harnessed to design SACs with optimized MASI to increase the efficiency of H2O2 electrosynthesis. Finally, we distill the challenges that lay ahead in this field and provide a forward-looking perspective on the future research directions that can be pursued.

Tailoring Macro/Meso/Microporous Structures of Cellophane Noodle-Derived Activated Carbon for Electric Double-Layer Capacitors

To address the bottleneck associated with the slow ion transport kinetics observed in the porosity of activated carbons (ACs), hierarchically structured pore sizes were introduced on ACs used for electric double-layer capacitors (EDLCs) to promote ion transport kinetics under fast-rate charge-discharge conditions. In this study, we synthesized cellophane noodle-derived activated carbon (CNAC) with tailored porous structures, including the pore volume fraction of macro/meso/micropores and the specific surface area. The porous structures were effectively modulated by adjusting the KOH concentration during chemical activation. In addition, optimized KOH activation in CNAC modulated the chemical bonding ratios of C=O, pyrrolic-N, and graphitic-N. Given the hierarchically designed porous structure and chemical bonding states, the CNAC fabricated with optimized KOH activation exhibited a superior ultrafast rate capability in EDLCs (132.0 F/g at 10 A/g).

Chain-like One-Dimensional Assembly of Mesoporous Silica Nanoparticles: An Approach To Improve Hydrogel Adhesion

Mesoporous silica nanoparticles (MSNPs) are well known for their adhesive properties with hydrogels and living tissues. However, achieving direct contact between the silica nanoparticle surface and the adherend necessitates the removal of capping agents, which can lead to severe aggregation when exposed to wet surfaces. This aggregation is ineffective for simultaneously bridging the two adherends, resulting in a reduced adhesive strength. In this study, we designed and synthesized mesoporous silica nanochains (MSNCs) to enhance the interactions with hydrogels by promoting the formation of coarser structures with increased nanopore exposure. Chain-like one-dimensional assemblies in the MSNCs were generated by depleting the capping ligand, cetyltrimethylammonium bromide, from the surface of the MSNPs. To quantify the porous areas of the MSNCs, we analyzed scanning electron microscopy (SEM) images using an in-house SEM image analysis algorithm. Additionally, we conducted a comparative assessment of the adhesion energies of MSNCs and MSNPs on a poly(dimethylacrylamide) hydrogel using a universal testing machine. The MSNCs exhibited a maximum adhesion energy of 13.7 ± 0.7 J/m2 at 3 wt %, surpassing that of MSNPs (10.9 ± 0.3 J/m2) at 2 wt %. Moreover, the unique stacking structure of the MSNCs enabled them to maintain an adhesion energy of 13.4 ± 1.0 J/m2 at a high concentration of 9 wt %, whereas the adhesion energy of MSNPs decreased to 8.2 ± 0.4 J/m2. This underscores their potential as superior hydrogel adhesives in challenging wet tissue-like environments.

Ordered Mesoporous Silica Delivering siRNA as Cancer Nanotherapeutics: A Comprehensive Review

Nanosized mesoporous silica has emerged as a promising flexible platform delivering siRNA for cancer treatment. This ordered mesoporous nanosized silica provides attractive features of well-defined and tunable porosity, structure, high payload, and multiple functionalizations for targeted delivery and increasing biocompatibility over other polymeric nanocarriers. Moreover, it also overcomes the lacunae associated with traditional administration of drugs. Chemically modified porous silica matrix efficiently entraps siRNA molecules and prevents their enzymatic degradation and premature release. This Review discusses the synthesis of silica using the sol-gel approach and the advantages with different silica mesostructure. Herein, the factors affecting the synthesis of silica at nanometer scale, shape, porosity and nanoparticle surface modification are also highlighted to attain the desired nanostructured silica carriers. Additional emphasis is given to chemically modified silica delivering siRNA, where the silica nanoparticle surface was modified with different chemical moieties such as amine modified with (3-aminoropyl) triethoxysilane, polyethylenimine, chitosan, poly(ethylene glycol), and cyclodextrin polymer modification to attain high therapeutic loading, improved dispersibility and biocompatibility. Upon systemic administration, ordered mesoporous nanosized silica encounters blood cells, immune cells, and organs mainly of the reticuloendothelial system (RES). Thereby, biocompatibility and biodistribution of silica based nanocarriers are deliberated to design principles for smart and efficacious nanostructured silica-siRNA carriers and their clinical trial status. This Review further reports the future scopes and challenges for developing silica nanomaterial as a promising siRNA delivery vehicle demanding FDA approval.

Development of a simple paste for 3D printing of drug formulations containing a mesoporous material loaded with a poorly water-soluble drug

Poorly soluble drugs represent a substantial portion of emerging drug candidates, posing significant challenges for pharmaceutical formulators. One promising method to enhance the drug's dissolution rate and, consequently, bioavailability involves transforming them into an amorphous state within mesoporous materials. These materials can then be seamlessly integrated into personalized drug formulations using Additive Manufacturing (AM) techniques, most commonly via Fused Deposition Modeling. Another innovative approach within the realm of AM for mesoporous material-based formulations is semi-solid extrusion (SSE). This study showcases the feasibility of a straightforward yet groundbreaking hybrid 3D printing system employing SSE to incorporate drug-loaded mesoporous magnesium carbonate (MMC) into two different drug formulations, each designed for distinct administration routes. MMC was loaded with the poorly water-soluble drug ibuprofen via a solvent evaporation method and mixed with PEG 400 as a binder and lubricant, facilitating subsequent SSE. The formulation is non-aqueous, unlike most pastes which are used for SSE, and thus is beneficial for the incorporation of poorly water-soluble drugs. The 3D printing process yielded tablets for oral administration and suppositories for rectal administration, which were then analyzed for their dissolution behavior in biorelevant media. These investigations revealed enhancements in the dissolution kinetics of the amorphous drug-loaded MMC formulations. Furthermore, an impressive drug loading of 15.3 % w/w of the total formulation was achieved, marking the highest reported loading for SSE formulations incorporating mesoporous materials to stabilize drugs in their amorphous state by a wide margin. This simple formulation containing PEG 400 also showed advantages over other aqueous formulations for SSE in that the formulations did not exhibit weight loss or changes in size or form during the curing process post-printing. These results underscore the substantial potential of this innovative hybrid 3D printing system for the development of drug dosage forms, particularly for improving the release profile of poorly water-soluble drugs.

Depicted simulation model for removal of second-generation antipsychotic drugs adsorbed on Zn-MOF: adsorption locator assessment

CONTEXT

Electronic durable behavior on the material surface was accompanied by a class of antipsychotic drugs (APD) to describe the surface modification in the designed adsorption model. Hierarchically Zn-MOF system was utilized for estimating its capacity for drug molecule removal. Geometrically optimized strategy on the studied systems was performed using DFT/GGA/PBE. FMOs analysis was depicted based on the same level of calculations, and molecular electrostatic potential surface (MEP) was generated for unadsorbed and adsorbed systems to illustrate the variation in the surface-active sites. By interpreting the electronic density of states (DOS), the atomic orbital can be identified as a major or minor electronic distribution by PDOS graph. Adsorption locating behavior was considered to detect the significant surface interaction mode between APD and Zn-MOF surface based on lower adsorption energy. The stability of the adsorbed model was best described through dynamic simulation analysis with time through elevated temperatures. The non-covalent interactions were described using RDG/NCI analysis to show the major favorable surface interaction predicting the highly stable adsorption system.

METHODS

The most accurate geometrical computations were performed using the materials studio software followed by surface cleavage and vacuum slab generation. The first principle of DFT was used to apply CASTEP module with GGA/PBE method for band structure and DOS calculations. Three systems of antipsychotic drugs were computationally studied using CASTEP simulation package and adsorbed on an optimized Zn-MOF surface. Adsorption locator module predicted the preferred adsorption mechanistic models, in which the first model was arranged to be more stable, to confirm the occurrence of some interactions in the adsorption mechanism.

Ambient Catalytic Spinning of Polyethylene Nanofibers

A novel single-atom Ni(II) catalyst (Ni-OH) is covalently immobilized onto the nano-channels of mesoporous Santa Barbara Amorphous (SBA)-15 particles and isotropic Anodized Aluminum Oxide (AAO) membrane for confined-space ethylene extrusion polymerization. The presence of surface-tethered Ni complexes (Ni@SBA-15 and Ni@AAO) is confirmed by the inductively coupled plasma-optical emission spectrometry (ICP-OES) and X-ray photoelectron spectroscopy (XPS). In the catalytic spinning process, the produced PE materials exhibit very homogeneous fibrous morphology at nanoscale (diameter: ~50 nm). The synthesized PE nanofibers extrude in a highly oriented manner from the nano-reactors at ambient temperature. Remarkably high Mw (1.62×106  g mol-1 ), melting point (124 °C), and crystallinity (41.8 %) are observed among PE samples thanks to the confined-space polymerization. The chain-walking behavior of surface tethered Ni catalysts is greatly limited by the confinement inside the nano-channels, leading to the formation of very low-branched PE materials (13.6/1000 C). Due to fixed supported catalytic topology and room temperature, the filaments are expected to be free of entanglement. This work signifies an important step towards the realization of a continuous mild catalytic-spinning (CATSPIN) process, where the polymer is directly synthesized into fiber shape at negligible chain branching and elegantly avoiding common limitations like thermal degradation or molecular entanglement.

SBA-15- and SBA-16-Functionalized Silicas as New Carriers of Niacinamide

Amorphous silica as a food additive (E 551) is used in food materials (e.g., sweeteners, dairy products) for its anti-caking properties. The physicochemical properties of SiO2 also make it suitable to serve as a carrier of active substances in functional foods, dietary supplements, and drugs. Deficiency of niacinamide (vitamin B3, niacin) leads to several pathologies in the nervous system and causes one of the nutritional diseases called pellagra. The present study focuses on the use of hybrid ordered mesoporous silicas (SBA-15/SBA-16) functionalized with amino groups introduced through grafting or co-condensation with (N-vinylbenzyl)aminoethylaminopropyltrimethoxysilane (Z-6032) as novel carriers of niacinamide. They combine the characteristics of a relatively stable and chemically inert amorphous silica matrix with well-defined structural/textural parameters and organic functional groups that give specific chemical properties. The highest degree of carrier loading with niacinamide (16 wt.%) was recorded for the unmodified SBA-15. On the other hand, the highest degree of niacinamide release characterizes the functionalized SBA-15 sample (60% after 24 h), indicating that the presence of amino groups affects the release profile of niacinamide from the structure of the mesoporous silica.

Effective Distribution of Gold Nanorods in Ordered Thick Mesoporous Silica: A Choice of Noninvasive Theranostics

Porous silica coated gold nanorod core-shell structures demonstrate a multifunctional role in bioimaging, drug delivery, and cancer therapeutics applications. Here, we address a new approach for effective distribution of gold nanorods (GNRs) in a mesoporous silica (MS) shell, viz., one nanorod in one silica particle (GMS). We have studied that silica coating presents major advantages for the better biocompatibility and stability of GNRs. In this study, two different thicknesses of silica shell over GNRs have been discussed as per the application's need; GNRs in thin silica (11 nm) are fit for phototherapy and bioimaging, whereas thick and porous silica (51 nm) coated gold nanorods are suitable for triggered drug delivery and theranostics. However, effective distribution of GNRs in ordered architecture of thick mesoporous silica (MS, more than 50 nm thickness) with high surface area (more than 1000 m2/g) is not well understood so far. Here, we present methodical investigations for uniform and highly ordered mesoporous silica coating over GNRs with tunable thickness (6 to 51 nm). Judicious identification and optimization of different reaction parameters like concentrations of silica precursor (TEOS, 1.85-43.9 mM), template (CTAB, 0.9-5.7 mM), effect of temperature, pH (8.6-10.8), stirring speed (100-400 rpm), and, most importantly, the mode of addition of TEOS with GNRs have been discussed. Studies with thick, porous silica coated GNRs simplify the highest ever reported surface area (1100 m2/g) and cargo capacity (57%) with better product yield (g/batch). First and foremost, we report a highly scalable (more than 500 mL) and rapid direct deposition of an ordered MS shell around GNRs. These engineered core-shell nanoparticles demonstrate X-ray contrast property, synergistic photothermal-chemotherapeutics, and imaging of tumor cell (96% cell death) due to released fluorescent anticancer drug molecules and photothermal effect (52 °C) of embedded GNRs. A deeper insight into their influence on the architectural features and superior theranostics performances has been illustrated in detail. Hence, these findings indicate the potential impact of individual GMS for image guided combination therapeutics of cancer.

Effectively Controlled Structures of Si-C Composites from Rice Husk for Oxygen Evolution Catalyst

This work explores a simple way to regulate the morphology and structure of biomass-based carbon and effectively utilize its internal functional groups as the substrate for the next energy materials. The unique randomly oriented and highly interconnected cordyceps-like 3D structure of rice husk is formed by direct high-temperature carbonization, and the main component is SiC. The well-arranged cordyceps-like structure of SiC demonstrates a remarkable structural/chemical stability and a high rate of electron migration, and further could be used as a stable substrate for metal deposition and find application in the field of electrocatalysis. The oxygen evolution reaction catalyst (SiC-C@Fe3O4) prepared by chemical deposition exhibits a low overpotential (260 mV), low Tafel slope (56.93 mV dec-1), high electrochemical active surface area (54.92 mF cm-2), and low Rct value (0.15 Ω) at a current density of 10 mA cm-2 in 1 M KOH electrolyte. The produced natural Si-C composite materials overcome the limitations imposed by the intricate internal structure of silicon-rich biomass. The existence of this stable substrate offers a novel avenue for maximizing the utilization of rice-husk-based carbon, and broadens its application field. At the same time, it also provides a theoretical basis for the use of rice husks in the field of hydrogen production by electrolysis of water, thus promoting their high-value utilization.

Ambient Electrosynthesis toward Single-Atom Sites for Electrocatalytic Green Hydrogen Cycling

With the ultimate atomic utilization, well-defined configuration of active sites and unique electronic properties, catalysts with single-atom sites (SASs) exhibit appealing performance for electrocatalytic green hydrogen generation from water splitting and further utilization via hydrogen-oxygen fuel cells, such that a vast majority of synthetic strategies toward SAS-based catalysts (SASCs) are exploited. In particular, room-temperature electrosynthesis under atmospheric pressure offers a novel, safe, and effective route to access SASs. Herein, the recent progress in ambient electrosynthesis toward SASs for electrocatalytic sustainable hydrogen generation and utilization, and future opportunities are discussed. A systematic summary is started on three kinds of ambient electrochemically synthetic routes for SASs, including electrochemical etching (ECE), direct electrodeposition (DED), and electrochemical leaching-redeposition (ELR), associated with advanced characterization techniques. Next, their electrocatalytic applications for hydrogen energy conversion including hydrogen evolution reaction, oxygen evolution reaction, overall water splitting, and oxygen reduction reaction are reviewed. Finally, a brief conclusion and remarks on future challenges regarding further development of ambient electrosynthesis of high-performance and cost-effective SASCs for many other electrocatalytic applications are presented.

Tuning Mesoporous Silica Nanoparticles in Novel Avenues of Cancer Therapy

The global menace of cancer has led to an increased death toll in recent years. The constant evolution of cancer therapeutics with novel delivery systems has paved the way for translation of innovative therapeutics from bench to bedside. This review explains the significance of mesoporous silica nanoparticles (MSNs) as delivery vehicles with particular emphasis on cancer therapy, including novel opportunities for biomimetic therapeutics and vaccine delivery. Parameters governing MSN synthesis, therapeutic agent loading characteristics, along with tuning of MSN toward cancer cell specificity have been explained. The advent of MSN in nanotheranostics and its potential in forming nanocomposites for imaging purposes have been illustrated. Additionally, various hurdles encountered during the bench to bedside translation have been explained along with potential avenues to circumvent them. This also opens up new horizons in drug delivery, which could be useful to researchers in the years to come.