The Role of Bismuth in Suppressing the CO Poisoning in Alkaline Methanol Electrooxidation: Switching the Reaction from the CO to Formate Pathway

Mild-Condition Photocatalytic Reforming of Methanol-Water by a Hierarchical, Asymmetry Carbon Nitride

As a reproducible intermediate for hydrogen (H2) and carbon cycling, methanol mixed with water (H2O) in a ratio of 1 : 1 can multiply the outcome of green H2 generation via Photocatalytic reforming of methanol-H2O (PRMW). Hitherto, low-energy and mild-condition PRMW remains a serious challenge. Here, the amino acid-derived carbon nitrides (ACN) were synthesized supramolecular precursor strategy for PRMW and achieved excellent performance (H2, 35.6 mmol h-1 g-1; CO2, 11.5 mmol h-1 g-1) under sunlight at 35 °C. It was revealed that the surface-terminating carboxyl groups (-COOH) promote the dark dehydrogenation of methanol on MetCNx to form methoxy (*OCH3) and methylol (*CH2OH) simultaneously, with the hydroxyl (*OH) generated by photostimulated H2O oxidation promotes the C-H activation of formaldehyde, then leads the whole reaction into the formation of CO2 and three H2. The extended light absorption, enhanced charge separation and transport, and efficient surface reaction improve photocatalytic efficiency.

Electronegativity- induced cobalt-doped platinum hollow nanospheres with high CO tolerance for efficient methanol oxidation reaction

Although Platinum (Pt)-based alloys have garnered significant interest within the realm of direct methanol fuel cells (DMFCs), there still exists a notable dearth in the exploration of the catalytic behavior of the liquid fuels on well-defined active sites and unavoidable Pt poisoning because of the adsorbed CO species (COads). Here, we propose an electronegativity-induced electronic redistribution strategy to optimize the adsorption of crucial intermediates for the methanol oxidation reaction (MOR) by introducing the Co element to form the PtCo alloys. The optimal PtCo hollow nanospheres (HNSs) exhibit excellent high-quality activity of 3.27 A mgPt-1, which is 11.6 times and 13.1 times higher than that of Pt/C and pure Pt, respectively. The in-situ Fourier transform infrared reflection spectroscopy validates that electron redistribution could weak CO adsorption, and subsequently decrease the CO poisoning adjacent the Pt active sites. Theoretical simulations result show that the introduction of Co optimize surface electronic structure and reduce the d-band center of Pt, thus optimized the adsorption behavior of COads. This study not only employs a straightforward method for the preparation of Pt-based alloys but also delineates a pathway toward designing advanced active sites for MOR via electronegativity-induced electronic redistribution.

Synthesis of defect-rich La2O2CO3 supports for enhanced CO2-to-methanol conversion efficiency

Converting CO2 to methanol is crucial for addressing fuel scarcity and mitigating the greenhouse effect. Cu-based catalysts, with their diverse surface states, offer the potential to control reaction pathways and generate reactive H* species. However, a major challenge lies in oxidizing active Cu0 species by water generated during the catalytic process. While nonreducible metal oxides are beneficial in stabilizing metallic states, their limited capability to generate surface oxygen vacancies (OV) hinders CO2 activation. Herein, we present a strategy by doping Nd into a La2O2CO3 (LOC) support, enhancing OV formation by disrupting its lattice dyadicity. This leads to higher Cu0 concentration and improved CO2 activation. The resulting Cu/LOC:Nd catalyst notably outperforms Cu/LOC and CuZnAl catalysts, achieving a methanol yield of 9.9 moles of methanol per hour per mole of Cu. Our approach opens up possibilities for enhancing Cu-based catalysts in CO2 conversion.

Pt1.8Pd0.2CuGa Intermetallic Nanocatalysts with Enhanced Methanol Oxidation Performance for Efficient Hybrid Seawater Electrolysis

Seawater electrolysis is a potentially cost-effective approach to green hydrogen production, but it currently faces substantial challenges for its high energy consumption and the interference of chlorine evolution reaction (ClER). Replacing the energy-demanding oxygen evolution reaction with methanol oxidation reaction (MOR) represents a promising alternative, as MOR occurs at a significantly low anodic potential, which cannot only reduce the voltage needed for electrolysis but also completely circumvents ClER. To this end, developing high-performance MOR catalysts is a key. Herein, a novel quaternary Pt1.8Pd0.2CuGa/C intermetallic nanoparticle (i-NP) catalyst is reported, which shows a high mass activity (11.13 A mgPGM -1), a large specific activity (18.13 mA cmPGM -2), and outstanding stability toward alkaline MOR. Advanced characterization and density functional theory calculations reveal that the introduction of atomically distributed Pd in Pt2CuGa intermetallic markedly promotes the oxidation of key reaction intermediates by enriching electron concentration around Pt sites, resulting in weak adsorption of carbon-containing intermediates and favorable adsorption of synergistic OH- groups near Pd sites. MOR-assisted seawater electrolysis is demonstrated, which continuously operates under 1.23 V for 240 h in simulated seawater and 120 h in natural seawater without notable degradation.

Breaking Highly Ordered PtPbBi Intermetallic with Disordered Amorphous Phase for Boosting Electrocatalytic Hydrogen Evolution and Alcohol Oxidation

Constructing amorphous/intermetallic (A/IMC) heterophase structures by breaking the highly ordered IMC phase with disordered amorphous phase is an effective way to improve the electrocatalytic performance of noble metal-based IMC electrocatalysts because of the optimized electronic structure and abundant heterophase boundaries as active sites. In this study, we report the synthesis of ultrathin A/IMC PtPbBi nanosheets (NSs) for boosting hydrogen evolution reaction (HER) and alcohol oxidation reactions. The resulting A/IMC PtPbBi NSs exhibit a remarkably low overpotential of only 25 mV at 10 mA cm-2 for the HER in an acidic electrolyte, together with outstanding stability for 100 h. In addition, the PtPbBi NSs show high mass activities for methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR), which are 13.2 and 14.5 times higher than those of commercial Pt/C, respectively. Density functional theory calculations demonstrate that the synergistic effect of amorphous/intermetallic components and multimetallic composition facilitate the electron transfer from the catalyst to key intermediates, thus improving the catalytic activity of MOR. This work establishes a novel pathway for the synthesis of heterophase two-dimensional nanomaterials with high electrocatalytic performance across a wide range of electrochemical applications.

Regulating Lateral Adsorbate Interaction for Efficient Electroreforming of Bio-polyols

Tailoring the selectivity at the electrode-electrolyte interface is one of the greatest challenges for heterogeneous electrocatalysis, and complementary strategies to catalyst structural designs need to be developed. Herein, we proposed a new strategy of controlling the electrocatalytic pathways by lateral adsorbate interaction for the bio-polyol oxidation. Redox-innocent 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) anion possesses the alcoholic property that facilely adsorbs on the nickel oxyhydroxide catalyst, but is resistant to oxidation due to the electron-withdrawing trifluoromethyl groups. The alien HFIP adsorbents can compete with bio-polyols and form a mixed adsorbate layer that creates lateral adsorbate interaction via hydrogen bonding, which achieved a >2-fold enhancement of the oxalate selectivity to 55 % for the representative glycerol oxidation and can be extended to various bio-polyol substrates. Through in situ spectroscopic analysis and DFT calculation on the glycerol oxidation, we reveal that the hydrogen-bonded adsorbate interaction can effectively tune the adsorption energies and tailor the oxidation capabilities toward the targeted products. This work offers an additional perspective of tuning electrocatalytic reactions via introducing redox-innocent adsorbates to create lateral adsorbate interactions.

Single-atom Mo-tailored high-entropy-alloy ultrathin nanosheets with intrinsic tensile strain enhance electrocatalysis

The precise structural integration of single-atom and high-entropy-alloy features for energy electrocatalysis is highly appealing for energy conversion, yet remains a grand challenge. Herein, we report a class of single-atom Mo-tailored PdPtNiCuZn high-entropy-alloy nanosheets with dilute Pt-Pt ensembles and intrinsic tensile strain (Mo1-PdPtNiCuZn) as efficient electrocatalysts for enhancing the methanol oxidation reaction catalysis. The as-made Mo1-PdPtNiCuZn delivers an extraordinary mass activity of 24.55 A mgPt-1 and 11.62 A mgPd+Pt-1, along with impressive long-term durability. The planted oxophilic Mo single atoms as promoters modify the electronic structure of isolated Pt sites in the high-entropy-alloy host, suppressing the formation of CO adsorbates and steering the reaction towards the formate pathway. Meanwhile, Mo promoters and tensile strain synergistically optimize the adsorption behaviour of intermediates to achieve a more energetically favourable pathway and minimize the methanol oxidation reaction barrier. This work advances the design of atomically precise catalytic sites by creating a new paradigm of single atom-tailored high-entropy alloys, opening an encouraging pathway to the design of CO-tolerance electrocatalysts.

Atomically Dispersed CrOX on Pd Metallene for CO-Resistant Methanol Oxidation

The effective design and construction of high-performance methanol oxidation reaction (MOR) electrocatalysts are significant for the development of direct methanol fuel cells. But the active sites of the MOR electrocatalysts are susceptible to being poisoned by CO, resulting in poor durability. Herein, we report an atomically dispersed CrOX species anchored on Pd metallene through bridging O atoms. This catalyst shows an outstanding MOR performance with 7 times higher mass activity and 100 mV lower CO electrooxidation potential than commercial Pd/C. The results of operando electrochemical Fourier transform infrared spectroscopy demonstrate the rapid removal of CO* on CrOX-Pd metallene. Theoretical calculations reveal that atomically dispersed CrOX can lower the adsorption energy of CO* on Pd sites and enhance that of OH* through the formation of a hydrogen bond, decreasing the formation energy of COOH*. This work provides a new strategy for improving MOR performance via atomically engineering oxide/metal interfaces.