Stretchable and Skin-Mountable Temperature Sensor Array Using Reduction-Controlled Graphene Oxide for Dermatological Thermography

In situ construction of multifunctional femtosecond laser-induced graphene on arbitrary substrates

The construction of laser-induced graphene (LIG) on various substrates is important for expanding new applications. However, current LIG transfer technologies are hampered by limited substrates, complicated processes, induced graphene defects, and single function. Herein, a facile laser processing method is proposed for in situ construction of multifunctional femtosecond laser-induced graphene (FsLIG) on arbitrary substrates utilizing femtosecond laser acting on polyimide tape. Unlike previous LIG transfer research, the proposed method is applicable to any substrates without introducing additional graphene defects, while also exhibiting multifunctionality. Raman spectra results confirm successful fabrication of FsLIG on various substrates involving paper, aluminum, ceramic, and silicon. Taking paper for example, FsLIG demonstrates multifunctional characteristics including high water contact angle (∼153.4°), large absorptance (∼98.8%), low sheet resistance (∼82.0 Ω sq-1), and reliable temperature sensing (∼-0.089% °C-1) properties. Our study provides a reliable pathway for fabricating multifunctional FsLIG on arbitrary substrates.

Flexible Temperature Sensor with 2D In2Se3 Ferroelectric-Semiconductor Field Effect Transistor Exhibiting Record High Sensitivity

In this study, a In2Se3 ferroelectric-semiconductor field-effect transistor is reported for highly sensitive temperature sensing. The high thermal sensitivity of 696%/°C can be achieved by integrating semiconducting behavior and ferroelectricity in In2Se3 thin film. By inducing a polarization up state in the ferroelectric-semiconductor by applying gate bias, the carriers within the In2Se3 semiconductor are depleted, suppressing channel formation. Under polarization up state, off-currents are very sensitive to temperature variation, following variable range hopping conduction. The drain currents are found to be in proportional toexp [ T 0 T ] 1 4 $\exp {{[ {\frac{{{{T}_0}}}{{\mathrm{T}}}} ]}^{\frac{1}{4}}}$ with T0 of 1.27 × 1012 K. To achieve variable range hopping transport, defective In2Se3 is deposited at low temperatures (240 °C) using spray pyrolysis. Fabricated In2Se3 temperature sensor on flexible polyimide substrate can detect a broad range of temperatures (RT to 200 °C) with high stability, exhibiting excellent temperature sensing performance. In addition, the very thin flexible temperature sensor array is demonstrated for large area spatial temperature sensing.

New Carbon Materials for Multifunctional Soft Electronics

Soft electronics are garnering significant attention due to their wide-ranging applications in artificial skin, health monitoring, human-machine interaction, artificial intelligence, and the Internet of Things. Various soft physical sensors such as mechanical sensors, temperature sensors, and humidity sensors are the fundamental building blocks for soft electronics. While the fast growth and widespread utilization of electronic devices have elevated life quality, the consequential electromagnetic interference (EMI) and radiation pose potential threats to device precision and human health. Another substantial concern pertains to overheating issues that occur during prolonged operation. Therefore, the design of multifunctional soft electronics exhibiting excellent capabilities in sensing, EMI shielding, and thermal management is of paramount importance. Because of the prominent advantages in chemical stability, electrical and thermal conductivity, and easy functionalization, new carbon materials including carbon nanotubes, graphene and its derivatives, graphdiyne, and sustainable natural-biomass-derived carbon are particularly promising candidates for multifunctional soft electronics. This review summarizes the latest advancements in multifunctional soft electronics based on new carbon materials across a range of performance aspects, mainly focusing on the structure or composite design, and fabrication method on the physical signals monitoring, EMI shielding, and thermal management. Furthermore, the device integration strategies and corresponding intriguing applications are highlighted. Finally, this review presents prospects aimed at overcoming current barriers and advancing the development of state-of-the-art multifunctional soft electronics.

Fully Integrated Passive Wireless Sensor with Mechanical-Electrical Double-Gradient for Multifunctional Healthcare Monitoring

Accurate, effective, and continuous monitoring of pressure, moisture, and temperature is essential for routine health assessments and professional patient care. In this study, we present a fully integrated multiparameter passive wireless sensor (MWS) that employs a mechanical-electrical dual-gradient structure design. The unique gradient porous structure endows the MWS with significant advantages in terms of detection dimensions (pressure, moisture, and temperature), sensitivity, and stability. Compared to single mechanical gradient designs, the sensor demonstrates 2.6 times higher pressure sensitivity and a 5-tier moisture detection capability. By bridging the technology gap between high-precision multiparameter sensing, wireless communication, and energy management, the MWS is capable of measuring multiple physiological parameters, including breath, ballistocardiograph, moisture, and temperature at multiple points, providing real-time assessments of the physiological state of the subjects. This work offers valuable quantitative insights for caregivers and paves the way for significant advancements in personal healthcare management.

Standalone Stretchable Biophysical Sensing System Based on Laser Direct Write of Patterned Porous Graphene/Co3O4 Nanocomposites

Skin-interfaced wearable sensors can continuously monitor various biophysical and biochemical signals for health monitoring and disease diagnostics. However, such devices are typically limited by unsatisfactory and unstable output performance of the power supplies under mechanical deformations and human movements. Furthermore, there is also a lack of a simple and cost-effective fabrication technique to fabricate and integrate varying materials in the device system. Herein, we report a fully integrated standalone stretchable biophysical sensing system by combining wearable biophysical sensors, triboelectric nanogenerator (TENG), microsupercapacitor arrays (MSCAs), power management circuits, and wireless transmission modules. All of the device components and interconnections based on the three-dimensional (3D) networked graphene/Co3O4 nanocomposites are fabricated via low-cost and scalable direct laser writing. The self-charging power units can efficiently harvest energy from body motion into a stable and adjustable voltage/current output to drive various biophysical sensors and wireless transmission modules for continuously capturing, processing, and wirelessly transmitting various signals in real-time. The novel material modification, device configuration, and system integration strategies provide a rapid and scalable route to the design and application of next-generation standalone stretchable sensing systems for health monitoring and human-machine interfaces.

Temperature dependent Raman spectroscopy and sensing performance of 2D black phosphorus

Temperature is an important parameter to be monitored in new wearable electronic devices. Layered black phosphorus (BP) has inherent good thermal stability and semiconductor properties and has a promising application as a temperature sensing layer. Here, we investigate the temperature sensing properties of BP, using in situ Raman spectroscopy and x-ray diffraction techniques. Flexible sensors are constructed, and temperature response is investigated in the range of 6-38 °C. The prospect application for monitoring the temperature of human body parts is demonstrated. The results show that the BP-based temperature sensors demonstrate good negative temperature coefficient characteristics and display high sensitivity and reproducible sensing performance. The temperature-dependent performance suggests the feasibility of BP as a sensitive layer in a wide temperature range. This work paves the way for exploring new applications of amazing layered materials, such as BP, in wearable electronic devices.

Solution-Processed Flexible Temperature Sensor Array for Highly Resolved Spatial Temperature and Tactile Mapping Using ESN-Based Data Interpolation

High-performance flexible temperature sensors are crucial in various technological applications, such as monitoring environmental conditions and human healthcare. The ideal characteristics of these sensors for stable temperature monitoring include scalability, mechanical flexibility, and high sensitivity. Moreover, simplicity and low power consumption will be essential for temperature sensor arrays in future integrated systems. This study introduces a solution-based approach for creating a V2O5 nanowire network temperature sensor on a flexible film. Through optimization of the fabrication conditions, the sensor exhibits remarkable performance, sustaining long-term stability (>110 h) with minimal hysteresis and excellent sensitivity (∼-1.5%/°C). In addition, this study employs machine learning techniques for data interpolation among sensors, thereby enhancing the spatial resolution of temperature measurements and adding tactile mapping without increasing the sensor count. Introducing this methodology results in an improved understanding of temperature variations, advancing the capabilities of flexible-sensor arrays for various applications.

Temperature Sensors Integrated with an Electrochromic Readout toward Visual Detection

Temperature sensors have attracted great attention for personal health care and disease diagnosis in recent years. However, it is still a great challenge to fabricate reliable and highly sensitive temperature sensors that can convert physiological signals into easily readable signals in a convenient way. Herein, an integrated smart temperature sensor system based on a traditional temperature sensor and electrochromic display is proposed for real-time visual detection of temperature. Significantly, a voltage-regulated electrochromic device (ECD) based on tungsten oxide (WO3) and polyaniline (PANI) as the real-time visualization window was integrated into the platform to provide feedback on the temperature change. The ECD would change its color from green to blue based on the electrical signal of the temperature sensor, resulting in a visualized readout that can be monitored through our naked eye. Additionally, the smart temperature sensor system possesses an extremely durable property and cycle stability, remaining around 90% of the initial value even after 15,000 s continuous cycle. Thus, the novel design and low power consumption advantages make it a good candidate to pave the way for developing interactive wearable electronics and intelligent robots as real-time temperature feedback systems.

Wearable Temperature Sensors Based on Reduced Graphene Oxide Films

With the development of medical technology and increasing demands of healthcare monitoring, wearable temperature sensors have gained widespread attention because of their portability, flexibility, and capability of conducting real-time and continuous signal detection. To achieve excellent thermal sensitivity, high linearity, and a fast response time, the materials of sensors should be chosen carefully. Thus, reduced graphene oxide (rGO) has become one of the most popular materials for temperature sensors due to its exceptional thermal conductivity and sensitive resistance changes in response to different temperatures. Moreover, by using the corresponding preparation methods, rGO can be easily combined with various substrates, which has led to it being extensively applied in the wearable field. This paper reviews the state-of-the-art advances in wearable temperature sensors based on rGO films and summarizes their sensing mechanisms, structure designs, functional material additions, manufacturing processes, and performances. Finally, the possible challenges and prospects of rGO-based wearable temperature sensors are briefly discussed.