Aluminum Nanowire Arrays via Directed Assembly

Superplastic Nanomolding of Aluminum Waveguides for Subwavelength Light Routing, Splitting, and Encryption

Plasmonic nanowires (NWs) due to their polarization-dependent optics and enhanced light-matter interactions have presented vibrant capabilities in functional nanophotonic devices. However, current demonstrations have largely been based on chemically synthesized Ag NWs, which are extremely unstable and poorly functional. Here we show single-crystalline Al NWs can be fabricated by a superplastic nanomolding (SPNM) technique on a centimeter scale, which are earth-abundant and highly stable. They present robust properties of multimode waveguiding with long-term stability, high efficiency of beam splitting in response to the polarization, and durable thermal optical modulation, which can be readily applied as nanophotonic routers, splitters, and information encryptors. Moreover, this SNPM technique is extendable to other metals, which are highly exploitable for functional nanophotonic devices and integrated optical chips.

Light, strong, and stable nanoporous aluminum with native oxide shell

Aluminum (Al) metal is highly reactive but has excellent corrosion resistance because of the formation of a self-healing passive oxide layer on the surface. Here, we report that this native aluminum oxide shell can also stabilize and strengthen porous Al when the ligament (strut) size is decreased to the submicron or nanometer scale. The nanoporous Al with native oxide shell, which is a nanoporous Al-Al₂O₃ core-shell composite self-organized in a galvanic replacement reaction, is nonflammable under ambient conditions and stable against coarsening near melting temperatures. This material is stronger than conventional foams of similar density consisting of pure Al or Al-based composites, and also lighter and stronger than most nanoporous metals reported previously. Its light weight, high strength, and excellent stability warrant the explorations of functional and structural applications of this material, if more efficient and scalable synthesis processes are developed in the future.

Aluminum Nanocrystals Grow into Distinct Branched Aluminum Nanowire Morphologies

Plasmonic nanowires (NWs) have generated great interest in their applications in nanophotonics and nanotechnology. Here we report the synthesis of Al nanocrystals (NCs) with controlled morphologies that range from nanospheres to branched NW and NW bundles. This is accomplished by catalyzing the pyrolysis of triisobutyl aluminum (TIBA) with Tebbe's reagent, a titanium(III) catalyst with two cyclopentadienyl ligands. The ratio of TIBA to Tebbe's reagent is critical in determining the morphology of the resulting Al NC. The branched Al NWs grow in their ⟨100⟩ directions and are formed by oriented attachment of isotropic Al NCs on their {100} facets. Branched NWs are strongly absorptive from the UV to the mid-IR, with longitudinal dipolar, higher-order, and transverse plasmons, all contributing to their broadband response. This rapid Al NW synthesis enables the expanded use of Al for plasmonic and nanophotonic applications in the ultraviolet, visible, and infrared regions of the spectrum.

Facile fabrication and formation mechanism of aluminum nanowire arrays

Anodized alumina membranes (AAMs) have proven effective at making vertically-oriented and well-ordered metal nanowire arrays, which are useful in plasmonics and electrochemistry. Here, we produced Al nanowires via directed AAM pore nucleation: a patterned oxide mask on a flat Al surface directed where pores did and did not form, the pores acting to oxidize Al around the sites without pores. This left Al nanowires embedded in the AAM, and produced freestanding Al nanowires after etching the AAM. The nanowire tops had two distinct contours, smooth bowls and flat rough surfaces-suggesting that nanowires with bowl tops result from slow pore development relative to pattern-nucleated pores, not pore blockage as prior literature suggests. The observed low porosity of ∼2%, as opposed to the more typical 10%, suggests pore nucleation in the electrolyte employed may need greater local variations in electric field or pH, possibly explaining the electrolyte's peculiar ability to make Al nanowires. Finally, a soft nano-imprint lithography process was developed here to pattern the mask without damaging the stamp, avoiding a stamp degradation problem in previous work that utilized hard nano-imprint lithography.

Review of Fabrication Methods, Physical Properties, and Applications of Nanostructured Copper Oxides Formed via Electrochemical Oxidation

Typically, anodic oxidation of metals results in the formation of hexagonally arranged nanoporous or nanotubular oxide, with a specific oxidation state of the transition metal. Recently, the majority of transition metals have been anodized; however, the formation of copper oxides by electrochemical oxidation is yet unexplored and offers numerous, unique properties and applications. Nanowires formed by copper electrochemical oxidation are crystalline and composed of cuprous (CuO) or cupric oxide (Cu₂O), bringing varied physical and chemical properties to the nanostructured morphology and different band gaps: 1.44 and 2.22 eV, respectively. According to its Pourbaix (potential-pH) diagram, the passivity of copper occurs at ambient and alkaline pH. In order to grow oxide nanostructures on copper, alkaline electrolytes like NaOH and KOH are used. To date, no systemic study has yet been reported on the influence of the operating conditions, such as the type of electrolyte, its temperature, and applied potential, on the morphology of the grown nanostructures. However, the numerous reports gathered in this paper will provide a certain view on the matter. After passivation, the formed nanostructures can be also post-treated. Post-treatments employ calcinations or chemical reactions, including the chemical reduction of the grown oxides. Nanostructures made of CuO or Cu₂O have a broad range of potential applications. On one hand, with the use of surface morphology, the wetting contact angle is tuned. On the other hand, the chemical composition (pure Cu₂O) and high surface area make such materials attractive for renewable energy harvesting, including water splitting. While compared to other fabrication techniques, self-organized anodization is a facile, easy to scale-up, time-efficient approach, providing high-aspect ratio one-dimensional (1D) nanostructures. Despite these advantages, there are still numerous challenges that have to be faced, including the strict control of the chemical composition and morphology of the grown nanostructures, their uniformity, and understanding the mechanism of their growth.