Self-Assembled Epitaxial Au-Oxide Vertically Aligned Nanocomposites for Nanoscale Metamaterials

One-Step Epitaxy of Transition Metal Nitride Nanopillar Arrays with an Oxidation-Tunable Hyperbolic Dispersion

The controllable synthesis of epitaxial nanopillar arrays is fundamentally important to the development of advanced electrical and optical devices. However, this fascinating growth method has rarely been applied to the bottom-up synthesis of plasmonic nanostructure arrays (PNAs) with many broad, important, and promising applications in optical sensing, nonlinear optics, surface-enhanced spectroscopies, photothermal conversion, photochemistry, etc. Here, a one-step epitaxial approach to single-crystalline Nb0.25Ti0.75N (NbTiN) nanopillar arrays based on the layer plus island growth mode is demonstrated by strain engineering. Strikingly, the epitaxial NbTiN nanopillar arrays with high density (>1012/cm2) and sub-10 nm lateral sizes show a plasmonic hyperbolic dispersion in visible to near-infrared ranges and polarization-dependent light absorption behaviors, which can be well-simulated by theoretical modeling. Moreover, the nanovoids between NbTiN nanopillars enable an oxidation-tunable hyperbolic dispersion, which is hardly achieved in noble metal PNAs. This study paves a novel, easy, and scalable route to single-crystalline PNAs with oxidation-tunable plasmonic hyperbolic dispersions, which is beneficial to the development of low-cost and tunable electrical, optical, and electrocatalytic devices based on the PNAs.

Growth and properties of hybrid Au-Co0.8Ni0.2nanowires embedded in SrTiO3/SrTiO3(001)

We present a sequential growth scheme based on pulsed laser deposition, which yields dense arrays of ultrathin, match-shaped Au/CoNi nanopillars, vertically embedded in SrTiO3thin films. Analysis of the magnetic properties of these nanocomposites reveals a pronounced out-of-plane anisotropy. We show that the latter not only results from the peculiar nanoarchitecture of the hybrid films but is further enhanced by strong magneto-structural coupling of the wires to the surrounding matrix. Finally, we provide a detailed overview of the optical response of these vertical nanostructures. Combining ellipsometry measurements with finite-difference time-domain simulations allows us to assess the potential of our self-assembly approach, as well as its possible shortcomings, for producing hybrid thin films with well-tailored magneto-plasmonic properties.

TiN-Au/HfO2-Au Multilayer Thin Films with Tunable Hyperbolic Optical Response

Hyperbolic metamaterials (HMM) possess significant anisotropic physical properties and tunability and thus find many applications in integrated photonic devices. HMMs consisting of metal and dielectric phases in either multilayer or vertically aligned nanocomposites (VAN) form are demonstrated with different hyperbolic properties. Herein, self-assembled HfO2-Au/TiN-Au multilayer thin films, combining both the multilayer and VAN designs, are demonstrated. Specifically, Au nanopillars embedded in HfO2 and TiN layers forming the alternative layers of HfO2-Au VAN and TiN-Au VAN. The HfO2 and TiN layer thickness is carefully controlled by varying laser pulses during pulsed laser deposition (PLD). Interestingly, tunable anisotropic physical properties can be achieved by adjusting the bi-layer thickness and the number of the bi-layers. Type II optical hyperbolic dispersion can be obtained from high layer thickness structure (e.g., 20 nm), while it can be transformed into Type I optical hyperbolic dispersion by reducing the thickness to a proper value (e.g., 4 nm). This new nanoscale hybrid metamaterial structure with the three-phase VAN design shows great potential for tailorable optical components in future integrated devices.

Self-Assembled TiN-Metal Nanocomposites Integrated on Flexible Mica Substrates towards Flexible Devices

The integration of nanocomposite thin films with combined multifunctionalities on flexible substrates is desired for flexible device design and applications. For example, combined plasmonic and magnetic properties could lead to unique optical switchable magnetic devices and sensors. In this work, a multiphase TiN-Au-Ni nanocomposite system with core-shell-like Au-Ni nanopillars embedded in a TiN matrix has been demonstrated on flexible mica substrates. The three-phase nanocomposite film has been compared with its single metal nanocomposite counterparts, i.e., TiN-Au and TiN-Ni. Magnetic measurement results suggest that both TiN-Au-Ni/mica and TiN-Ni/mica present room-temperature ferromagnetic property. Tunable plasmonic property has been achieved by varying the metallic component of the nanocomposite films. The cyclic bending test was performed to verify the property reliability of the flexible nanocomposite thin films upon bending. This work opens a new path for integrating complex nitride-based nanocomposite designs on mica towards multifunctional flexible nanodevice applications.

High index dielectric films on metals: An island of emission

Fluorescent emitters are quenched near the surfaces of metals via rapid energy transfer to the metal, via surface plasmons, waveguide modes, and absorption. Commonly, this quenching is reduced by introducing a polymeric or dielectric spacer but requires large distances, at least a fraction of the wavelength, between the metal and chromophore. Using the classical theory for a dipole above a metal/dielectric substrate, we investigate the fluorescent yield for emitters above a wide range of metals and spacers. For metals with low loss and low plasma frequencies, a high index spacer is shown to be advantageous for obtaining higher fluorescent yield in an "island of emission" at finely tuned spacer thickness just 20-30 nm from the metal surface. For such metal-dielectric combinations, fluorophores can be placed surprisingly close to the metal surface while remaining significantly emissive.

Self-Assembled Au Nanoelectrodes: Enabling Low-Threshold-Voltage HfO2-Based Artificial Neurons

Filamentary-type resistive switching devices, such as conductive bridge random-access memory and valence change memory, have diverse applications in memory and neuromorphic computing. However, the randomness in filament formation poses challenges to device reliability and uniformity. To overcome this issue, various defect engineering methods have been explored, including doping, metal nanoparticle embedding, and extended defect utilization. In this study, we present a simple and effective approach using self-assembled uniform Au nanoelectrodes to controll filament formation in HfO2 resistive switching devices. By concentrating the electric field near the Au nanoelectrodes within the BaTiO3 matrix, we significantly enhanced the device stability and reduced the threshold voltage by up to 45% in HfO2-based artificial neurons compared to the control devices. The threshold voltage reduction is attributed to the uniformly distributed Au nanoelectrodes in the insulating matrix, as confirmed by COMSOL simulation. Our findings highlight the potential of nanostructure design for precise control of filamentary-type resistive switching devices.

Visible and infrared dual-band anti-counterfeiting with self-assembled photonic heterostructures

Self-assembled photonic structures have greatly expanded the paradigm of optical materials due to their ease of access, the richness of results offered and the strong interaction with light. Among them, photonic heterostructure shows unprecedent advances in exploring novel optical responses that only can be realized by interfaces or multiple components. In this work, we realize visible and infrared dual-band anti-counterfeiting using metamaterial (MM) - photonic crystal (PhC) heterostructures for the first time. Sedimentation of TiO₂ nanoparticles in horizontal mode and polystyrene (PS) microspheres in vertical mode self-assembles a van der Waals interface, connecting TiO₂ MM to PS PhC. Difference of characteristic length scales between two components support photonic bandgap engineering in the visible band, and creates a concrete interface at mid-infrared to prevent interference. Consequently, the encoded TiO₂ MM is hidden by structurally colored PS PhC and visualized either by adding refractive index matching liquid or by thermal imaging. The well-defined compatibility of optical modes and facility in interface treatments further paves the way for multifunctional photonic heterostructures.

ZnO-ferromagnetic metal vertically aligned nanocomposite thin films for magnetic, optical and acoustic metamaterials

Magnetoacoustic waves generated in piezoelectric and ferromagnetic coupled nanocomposite films through magnetically driven surface acoustic waves present great promise of loss-less data transmission. In this work, ferromagnetic metals of Ni, Co and Co x Ni1-x are coupled with a piezoelectric ZnO matrix in a vertically-aligned nanocomposite (VAN) thin film platform. Oxidation was found to occur in the cases of ZnO-Co, forming a ZnO-CoO VAN, while only very minor oxidation was found in the case of ZnO-Ni VAN. An alloy approach of Co x Ni1-x has been explored to overcome the oxidation during growth. Detailed microstructural analysis reveals limited oxidation of both metals and distinct phase separation between the ZnO and the metallic phases. Highly anisotropic properties including anisotropic ferromagnetic properties and hyperbolic dielectric functions are found in the ZnO-Ni and ZnO-Co x Ni1-x systems. The magnetic metal-ZnO-based hybrid metamaterials in this report present great potential in coupling of optical, magnetic, and piezoelectric properties towards future magnetoacoustic wave devices.

Tunable physical properties in Bi-based layered supercell multiferroics embedded with Au nanoparticles

Multiferroic materials are an interesting functional material family combining two ferroic orderings, e.g., ferroelectric and ferromagnetic orderings, or ferroelectric and antiferromagnetic orderings, and find various device applications, such as spintronics, multiferroic tunnel junctions, etc. Coupling multiferroic materials with plasmonic nanostructures offers great potential for optical-based switching in these devices. Here, we report a novel nanocomposite system consisting of layered Bi1.25AlMnO3.25 (BAMO) as a multiferroic matrix and well dispersed plasmonic Au nanoparticles (NPs) and demonstrate that the Au nanoparticle morphology and the nanocomposite properties can be effectively tuned. Specifically, the Au particle size can be tuned from 6.82 nm to 31.59 nm and the 6.82 nm one presents the optimum ferroelectric and ferromagnetic properties and plasmonic properties. Besides the room temperature multiferroic properties, the BAMO-Au nanocomposite system presents other unique functionalities including localized surface plasmon resonance (LSPR), hyperbolicity in the visible region, and magneto-optical coupling, which can all be effectively tailored through morphology tuning. This study demonstrates the feasibility of coupling single phase multiferroic oxides with plasmonic metals for complex nanocomposite designs towards optically switchable spintronics and other memory devices.

ZnO-AuxCu1-x Alloy and ZnO-AuxAl1-x Alloy Vertically Aligned Nanocomposites for Low-Loss Plasmonic Metamaterials

Hyperbolic metamaterials are a class of materials exhibiting anisotropic dielectric function owing to the morphology of the nanostructures. In these structures, one direction behaves as a metal, and the orthogonal direction behaves as a dielectric material. Applications include subdiffraction imaging and hyperlenses. However, key limiting factors include energy losses of noble metals and challenging fabrication methods. In this work, self-assembled plasmonic metamaterials consisting of anisotropic nanoalloy pillars embedded into the ZnO matrix are developed using a seed-layer approach. Alloys of AuxAl1-x or AuxCu1-x are explored due to their lower losses and higher stability. Optical and microstructural properties were explored. The ZnO-AuxCu1-x system demonstrated excellent epitaxial quality and optical properties compared with the ZnO-AuxAl1-x system. Both nanocomposite systems demonstrate plasmonic resonance, hyperbolic dispersion, low losses, and epsilon-near-zero permittivity, making them promising candidates towards direct photonic integration.

Deposition pressure-induced microstructure control and plasmonic property tuning in hybrid ZnO-Ag x Au1-x thin films

Self-assembled oxide-metallic alloy nanopillars as hybrid plasmonic metamaterials (e.g., ZnO-Ag x Au1-x ) in a thin film form have been grown using a pulsed laser deposition method. The hybrid films were demonstrated to be highly tunable via systematic tuning of the oxygen background pressure during deposition. The pressure effects on morphology and optical properties have been investigated and found to be critical to the overall properties of the hybrid films. Specifically, low background pressure results in the vertically aligned nanocomposite (VAN) form while the high-pressure results in more lateral growth of the nanoalloys. Strong surface plasmon resonance was observed in the UV-vis region and a hyperbolic dielectric function was achieved due to the anisotropic morphology. The oxide-nanoalloy hybrid material grown in this work presents a highly effective approach for tuning the binary nanoalloy morphology and properties through systematic parametric changes, important for their potential applications in integrated photonics and plasmonics such as sensors, energy harvesting devices, and beyond.

Review on the growth, properties and applications of self-assembled oxide-metal vertically aligned nanocomposite thin films-current and future perspectives

Self-assembled oxide-metal nanocomposite thin films have aroused great research interest owing to their wide range of functionalities, including metamaterials with plasmonic and hyperbolic optical properties, and ferromagnetic, ferroelectric and multiferroic behaviors. Oxide-metal nanocomposites typically self-assemble as metal particles in an oxide matrix or as a vertically aligned nanocomposite (VAN) with metal nanopillars embedded in an oxide matrix. Among them, the VAN architecture is particularly interesting due to the vertical strain control and highly anisotropic structure, enabling the epitaxial growth of materials with large lattice mismatch. In this review, the driving forces behind the formation of self-assembled oxide-metal VAN structures are discussed. Specifically, an updated in-plane strain compensation model based on the areal strain compensation concept has been proposed in this review, inspired by the prior linear strain compensation model. It provides a guideline for material selection for designing VAN systems, especially those involving complex orientation matching relationships. Based on the model, several case studies are discussed, comparing the microstructure and morphology of different oxide-metal nanocomposites by varying the oxide phase. Specific examples highlighting the coupling between the electrical, magnetic and optical properties are also discussed in the context of oxide-metal nanocomposites. Future research directions and needs are also discussed.

Hybrid Ag-LiNbO3 nanocomposite thin films with tailorable optical properties

Ag nanostructures exhibit extraordinary optical properties, which are important for photonic device integration. Herein, we deposited Ag-LiNbO3 (LNO) nanocomposite thin films with Ag nanoparticles (NPs) embedded into the LNO matrix by the co-deposition of Ag and LNO using a pulsed laser deposition (PLD) method. The density and size of Ag NPs were tailored by varying the Ag composition. Low-density and high-density Ag-LNO nanocomposite thin films were deposited and their optical properties, such as transmittance spectra, ellipsometry measurement, as well as angle-dependent and polarization-resolved reflectivity spectra, were explored. The Ag-LNO films show surface plasmon resonance (SPR) in the visible range, tunable optical constants and optical anisotropy, which are critical for photonic device applications.

Self-Assembled BaTiO3-AuxAg1-x Low-Loss Hybrid Plasmonic Metamaterials with an Ordered "Nano-Domino-like" Microstructure

Metallic plasmonic hybrid nanostructures have attracted enormous research interest due to the combined physical properties coming from different material components and the broad range of applications in nanophotonic and electronic devices. However, the high loss and narrow range of property tunability of the metallic hybrid materials have limited their practical applications. Here, a metallic alloy-based self-assembled plasmonic hybrid nanostructure, i.e., a BaTiO₃-Au_xAg_1-x (BTO) vertically aligned nanocomposite, has been integrated by a templated growth method for low-loss plasmonic systems. Comprehensive microstructural characterizations including high-resolution scanning transmission electron microscopy (HRSTEM), energy-dispersive X-ray spectroscopy (EDS), and three-dimensional (3D) electron tomography demonstrate the formation of an ordered "nano-domino-like" morphology with Au_0.4Ag_0.6 nanopillars as cylindrical cores and BTO as square shells. By comparing with the BTO-Au hybrid thin film, the BTO-Au_0.4Ag_0.6 alloyed film exhibits much broader plasmon resonance, hyperbolic dispersion, low-loss, and thermally robust features in the UV-vis-NIR wavelength region. This study provides a feasible platform for a complex alloyed plasmonic hybrid material design with low-loss and highly tunable optical properties toward all-optical integrated devices.

Nitride-Oxide-Metal Heterostructure with Self-Assembled Core-Shell Nanopillar Arrays: Effect of Ordering on Magneto-Optical Properties

Magneto-optical (MO) coupling incorporates photon-induced change of magnetic polarization that can be adopted in ultrafast switching, optical isolators, mode convertors, and optical data storage components for advanced optical integrated circuits. However, integrating plasmonic, magnetic, and dielectric properties in one single material system poses challenges since one natural material can hardly possess all these functionalities. Here, co-deposition of a three-phase heterostructure composed of a durable conductive nitride matrix with embedded core-shell vertically aligned nanopillars, is demonstrated. The unique coupling between ferromagnetic NiO core and atomically sharp plasmonic Au shell enables strong MO activity out-of-plane at room temperature. Further, a template growth process is applied, which significantly enhances the ordering of the nanopillar array. The ordered nanostructure offers two schemes of spin polarization which result in stronger antisymmetry of Kerr rotation. The presented complex hybrid metamaterial platform with strong magnetic and optical anisotropies is promising for tunable and modulated all-optical-based nanodevices.

Markov chains for modeling complex luminescence, absorption, and scattering in nanophotonic systems

We developed a method to model fluorescence, absorption, and scattering in nanophotonic systems using ergodic Markov chains. Past works have used absorbing Markov chains to find the long-run angle-dependent distribution of emitted photons. In contrast, we use ergodic Markov chains to focus on the steady state distribution of photons within various media, giving additional insight into the macroscopic optical response during illumination. We show that the method reproduces Beer-Lambert's Law and Kirchhoff's Law, and can quantify deviations from these laws when their assumptions are violated. We also use the method to model luminescent solar concentrators (LSCs) based on semiconductor nanocrystals.

Multifunctional Metal-Oxide Nanocomposite Thin Film with Plasmonic Au Nanopillars Embedded in Magnetic La0.67Sr0.33MnO3 Matrix

Searching for multifunctional materials with tunable magnetic and optical properties has been a critical task toward the implementation of future integrated optical devices. Vertically aligned nanocomposite (VAN) thin films provide a unique platform for multifunctional material designs. Here, a new metal-oxide VAN has been designed with plasmonic Au nanopillars embedded in a ferromagnetic La_0.67Sr_0.33MnO₃ (LSMO) matrix. Such Au-LSMO nanocomposite presents intriguing plasmon resonance in the visible range and magnetic anisotropy property, which are functionalized by the Au and LSMO phase, respectively. Furthermore, the vertically aligned nanostructure of metal and dielectric oxide results in the hyperbolic property for near-field electromagnetic wave manipulation. Such optical and magnetic response could be further tailored by tuning the composition of Au and LSMO phases.

Thermal stability of self-assembled ordered three-phase Au-BaTiO3-ZnO nanocomposite thin films via in situ heating in TEM

Thermal stability of oxide-metal nanocomposites is important for designing practical devices for high temperature applications. Here, we study the thermal stability of the self-assembled ordered three-phase Au-BaTiO3-ZnO nanocomposite by both ex situ annealing under air and vacuum conditions, and by in situ heating in TEM in a vacuum. The study reveals that the variation of the annealing conditions greatly affects the resulting microstructure and the associated dominant diffusion mechanism. Specifically, Au nanoparticles show coarsening upon air annealing, while Au and Zn either form a solid solution, with Zn atomic percentage less than 10%, or undergo a reverse Vapor-Liquid-Solid (VLS) mechanism upon vacuum annealing. The distinct microstructures obtained also show different permittivity response in the visible and near-infrared region, while retaining their hyperbolic dispersion characteristics enabled by their highly anisotropic structures. Such in situ heating study in TEM provides critical information about microstructure evolution, growth mechanisms at the nanoscale, and thermal stability of the multi-phase nanocomposites for future electronic device applications.

Au-Encapsulated Fe Nanorods in Oxide Matrix with Tunable Magneto-Optic Coupling Properties

Materials with magneto-optic coupling properties are highly coveted for their potential applications ranging from spintronics and optical switches to sensors. In this work, a new, three-phase Au-Fe-La_0.5Sr_0.5FeO₃ (LSFO) hybrid material grown in a vertically aligned nanocomposite (VAN) form has been demonstrated. This three-phase hybrid material combines the strong ferromagnetic properties of Fe and the strong plasmonic properties of Au and the dielectric nature of the LSFO matrix. More interestingly, the immiscible Au and Fe phases form Au-encapsulated Fe nanopillars, embedded in the LSFO matrix. Multifunctionalities including anisotropic optical dielectric properties, plasmonic properties, magnetic anisotropy, and room-temperature magneto-optic Kerr effect coupling are demonstrated. The single-step growth method to grow the immiscible two-metal nanostructures (i.e., Au and Fe) in the complex hybrid material form opens exciting new potential opportunities for future three-phase VAN systems with more versatile metal selections.

Self-assembled nitride-metal nanocomposites: recent progress and future prospects

Two-phase nanocomposites have gained significant research interest because of their multifunctionalities, tunable geometries and potential device applications. Different from the previously demonstrated oxide-oxide 2-phase nanocomposites, coupling nitrides with metals shows high potential for building alternative hybrid plasmonic metamaterials towards chemical sensing, tunable plasmonics, and nonlinear optics. Unique advantages, including distinct atomic interface, excellent crystalline quality, large-scale surface coverage and durable solid-state platform, address the high demand for new hybrid metamaterial designs for versatile optical material needs. This review summarizes the recent progress on nitride-metal nanocomposites, specifically targeting bottom-up self-assembled nanocomposite thin films. Various morphologies including vertically aligned nanocomposites (VANs), self-organized nanoinclusions, and nanoholes fabricated by additional chemical treatments are introduced. Starting from thin film nucleation and growth, the prerequisites of successful strain coupling and the underlying growth mechanisms are discussed. These findings facilitate a better control of tunable nanostructures and optical functionalities. Future research directions are proposed, including morphological control of the secondary phase to enhance its homogeneity, coupling nitrides with magnetic phase for the magneto-optical effect and growing all-ceramic nanocomposites to extend functionalities and anisotropy.

3D Hybrid Trilayer Heterostructure: Tunable Au Nanorods and Optical Properties

Engineering plasmonic nanostructures from three dimensions (3D) is very attractive toward controllable and tunable nanophotonic components and devices. Herein, Au-based trilayer heterostructures composed of a dielectric spacer sandwiched by hybrid Au-TiN vertically aligned nanocomposite (VAN) nanoplasmonic claddings are demonstrated with a broad range of geometries and property tuning. Two types of spacer layers, that is, a pure dielectric BaTiO₃ layer and a hybrid plasmonic Au-BaTiO₃ VAN layer, contribute to the tuning of the Au nanorod dimension. Such geometrical variations of Au nanostructures originate from the surface energy and lattice strain tuned by the spacer layers. Optical measurements and numerical simulations suggest the change of the localized surface plasmon resonance which is strongly affected by the tailored Au nanorods as either separated or channeled. The uniaxial dielectric tensors suggest a tunable hyperbolic property affected by such a metal-insulator-metal trilayer stack. The complex 3D heterostructures offer additional tuning parameters and design flexibilities in hybrid plasmonic metamaterials toward potential applications in light harvesting, sensing, and nanophotonic devices.

Integration of highly anisotropic multiferroic BaTiO3-Fe nanocomposite thin films on Si towards device applications

Integration of highly anisotropic multiferroic thin films on silicon substrates is a critical step towards low-cost devices, especially high-speed and low-power consumption memories. In this work, an oxide-metal vertically aligned nanocomposite (VAN) platform has been used to successfully demonstrate self-assembled multiferroic BaTiO3-Fe (BTO-Fe) nanocomposite films with high structural anisotropy on Si substrates. The effects of various buffer layers on the crystallinity, microstructure, and physical properties of the BTO-Fe films have been explored. With an appropriate buffer layer design, e.g. SrTiO3/TiN bilayer buffer, the epitaxial quality of the BTO matrix and the anisotropy of the Fe nanopillars can be improved greatly, which in turn enhances the physical properties, including the ferromagnetic, ferroelectric, and optical response of the BTO-Fe thin films. This unique combination of properties integrated on Si offers a promising approach in the design of multifunctional nanocomposites for Si-based memories and optical devices.

Vertically Aligned AgxAu1-x Alloyed Nanopillars Embedded in ZnO as Nanoengineered Low-Loss Hybrid Plasmonic Metamaterials

Hybrid plasmonic metamaterials offer a pathway to exotic properties and technologically important applications including subdiffraction imaging and plasmonic energy harvesting. Challenges remain for practical applications including high absorption losses of noble metals and tedious growth/fabrication processes. In this work, a self-assembled hybrid plasmonic metamaterial consisting of anisotropic Ag_xAu_1-x alloy nanopillars embedded in a ZnO matrix has been successfully grown. The chemical composition of the nanoalloy was determined to be Ag₆₁Au₃₉. The microstructure and optical properties arising from ZnO-Ag₆₁Au₃₉ alloyed hybrid systems were investigated and compared with that of the ZnO-Ag particle-in-matrix nanocomposite and the ZnO-Au vertically aligned nanocomposite. The ZnO-Ag₆₁Au₃₉ hybrid system demonstrates anisotropic morphology, excellent epitaxial quality, and enhanced optical properties, including surface plasmon resonance, hyperbolic dispersion, low absorption losses, and numerous epsilon-near-zero permittivity points, making it a promising candidate for practical applications of hybrid plasmonic metamaterials.

Strain-Driven In-plane Ordering in Vertically Aligned ZnO-Au Nanocomposites with Highly Correlated Metamaterial Properties

Hyperbolic metamaterials demonstrate exotic optical properties that are poised to find applications in subdiffraction imaging and hyperlenses. Key challenges remain for practical applications, such as high energy losses and lack of hyperbolic properties in shorter wavelengths. In this work, a new oxide-metal (ZnO-Au) hybrid-material system in the vertically aligned nanocomposite thin-film form has been demonstrated with very promising in-plane two-phase ordering using a one-step growth method. Au nanopillars grow epitaxially in the ZnO matrix, and the pillar morphology, orientation, and quasi-hexagonal in-plane ordering are found to be effectively tuned by the growth parameters. Strong surface plasmon resonance has been observed in the hybrid system in the UV-vis range, and highly anisotropic dielectric properties have resulted with much broader and tunable hyperbolic wavelength regimes. The observed strain-driven two-phase in-plane ordering and its novel tunable hyperbolic metamaterial properties all demonstrate strong potential for future oxide-metal hybrid-material design toward future integrated hybrid photonics.

Orientation and lattice matching of CoNi nanowires embedded in SrTiO3: unveiling novel strain relaxation mechanisms in vertically aligned nanocomposites

Unveiling complex structural rearrangements and novel strain relaxation mechanisms in vertically aligned nanocomposites.

Integration of Hybrid Plasmonic Au-BaTiO3 Metamaterial on Silicon Substrates

Silicon integration of nanoscale metamaterials is a crucial step toward low-cost and scalable optical-based integrated circuits. Here, a self-assembled epitaxial Au-BaTiO₃ (Au-BTO) hybrid metamaterial with highly anisotropic optical properties has been integrated on Si substrates. A thin buffer layer stack (<20 nm) of TiN and SrTiO₃ (STO) was applied on Si substrates to ensure the epitaxial growth of the Au-BTO hybrid films. Detailed phase composition and microstructural analyses show excellent crystallinity and epitaxial quality of the Au-BTO films. By varying the film growth conditions, the density and dimension of the Au nanopillars can be tuned effectively, leading to highly tailorable optical properties including tunable localized surface plasmon resonance (LSPR) peak and hyperbolic dispersion shift in the visible and near-infrared regimes. The work highlights the feasibility of integrating epitaxial hybrid oxide-metal plasmonic metamaterials on Si toward future complex Si-based integrated photonics.

Tuning magnetic anisotropy in Co-BaZrO3 vertically aligned nanocomposites for memory device integration

Ferromagnetic nanostructures with strong anisotropic properties are highly desired for their potential integration into spintronic devices. Several anisotropic candidates, such as CoFeB and Fe-Pt, have been previously proposed, but many of them have limitations such as patterning issues or thickness restrictions. In this work, Co-BaZrO3 (Co-BZO) vertically aligned nanocomposite (VAN) films with tunable magnetic anisotropy and coercive field strength have been demonstrated to address this need. Such tunable magnetic properties are achieved through tuning the thickness of the Co-BZO VAN structures and the aspect ratio of the Co nanostructures, which can be easily integrated into spintronic devices. As a demonstration, we have integrated the Co-BZO VAN nanostructure into tunnel junction devices, which demonstrated resistive switching alluding to Co-BZO's immense potential for future spintronic devices.

Hybrid plasmonic Au-TiN vertically aligned nanocomposites: a nanoscale platform towards tunable optical sensing

Tunable plasmonic structure at the nanometer scale presents enormous opportunities for various photonic devices. In this work, we present a hybrid plasmonic thin film platform: i.e., a vertically aligned Au nanopillar array grown inside a TiN matrix with controllable Au pillar density. Compared to single phase plasmonic materials, the presented tunable hybrid nanostructures attain optical flexibility including gradual tuning and anisotropic behavior of the complex dielectric function, resonant peak shifting and change of surface plasmon resonances (SPRs) in the UV-visible range, all confirmed by numerical simulations. The tailorable hybrid platform also demonstrates enhanced surface plasmon Raman response for Fourier-transform infrared spectroscopy (FTIR) and photoluminescence (PL) measurements, and presents great potentials as designable hybrid platforms for tunable optical-based chemical sensing applications.

Self-Assembled Ordered Three-Phase Au-BaTiO3 -ZnO Vertically Aligned Nanocomposites Achieved by a Templating Method

Complex multiphase nanocomposite designs present enormous opportunities for developing next-generation integrated photonic and electronic devices. Here, a unique three-phase nanostructure combining a ferroelectric BaTiO₃ , a wide-bandgap semiconductor of ZnO, and a plasmonic metal of Au toward multifunctionalities is demonstrated. By a novel two-step templated growth, a highly ordered Au-BaTiO₃ -ZnO nanocomposite in a unique "nanoman"-like form, i.e., self-assembled ZnO nanopillars and Au nanopillars in a BaTiO₃ matrix, is realized, and is very different from the random three-phase ones with randomly arranged Au nanoparticles and ZnO nanopillars in the BaTiO₃ matrix. The ordered three-phase "nanoman"-like structure provides unique functionalities such as obvious hyperbolic dispersion in the visible and near-infrared regime enabled by the highly anisotropic nanostructures compared to other random structures. Such a self-assembled and ordered three-phase nanocomposite is obtained through a combination of vapor-liquid-solid (VLS) and two-phase epitaxy growth mechanisms. The study opens up new possibilities in the design, growth, and application of multiphase structures and provides a new approach to engineer the ordering of complex nanocomposite systems with unprecedented control over electron-light-matter interactions at the nanoscale.

Metal Oxide Nanocomposites: A Perspective from Strain, Defect, and Interface

Vertically aligned nanocomposite thin films with ordered two phases, grown epitaxially on substrates, have attracted tremendous interest in the past decade. These unique nanostructured composite thin films with large vertical interfacial area, controllable vertical lattice strain, and defects provide an intriguing playground, allowing for the manipulation of a variety of functional properties of the materials via the interplay among strain, defect, and interface. This field has evolved from basic growth and characterization to functionality tuning as well as potential applications in energy conversion and information technology. Here, the remarkable progress achieved in vertically aligned nanocomposite thin films from a perspective of tuning functionalities through control of strain, defect, and interface is summarized.

Nanoporous Films and Nanostructure Arrays Created by Selective Dissolution of Water-Soluble Materials

Highly porous thin films and nanostructure arrays are created by a simple process of selective dissolution of a water-soluble material, Sr3Al2O6. Heteroepitaxial nanocomposite films with self-separated phases of a target material and Sr3Al2O6 are first prepared by physical vapor deposition. NiO, ZnO, and Ni1- x Mg x O are used as the target materials. Only the Sr3Al2O6 phase in each nanocomposite film is selectively dissolved by dipping the film in water for 30 s at room temperature. This gentle and fast method minimizes damage to the remaining target materials and side reactions that can generate impurity phases. The morphologies and dimensions of the pores and nanostructures are controlled by the relative wettability of the separated phases on the growth substrates. The supercapacitor properties of the porous NiO films are enhanced compared to plain NiO films. The method can also be used to prepare porous films or nanostructure arrays of other oxides, metals, chalcogenides, and nitrides, as well as films or nanostructures with single-crystalline, polycrystalline, or amorphous nature.

Tailorable Au Nanoparticles Embedded in Epitaxial TiO2 Thin Films for Tunable Optical Properties

The unique property of plasmonic materials to localize light into deep sub-wavelength regime has greatly driven various applications in the field of photovoltaics, sensors, and photocatalysis. Here, we demonstrate the one-step growth of an oxide-metal hybrid thin film incorporating well-dispersed gold (Au) nanoparticles (NPs) with tailorable particle shape and diameters (ranging from 2 to 20 nm) embedded in highly epitaxial TiO₂ matrix, deposited using pulsed laser deposition. Incorporation of Au NPs reduces the band gap of TiO₂ and enhances light absorption in the visible regime owing to the excitation of localized surface plasmons. Optical properties, including the plasmonic response and permittivity, and photocatalytic activities of the Au-TiO₂ hybrid materials are effectively tuned as a function of the Au NP sizes. Such optical property tuning is well captured using full-field simulations and the effective medium theory for better understanding of the physical phenomena. The tailorable shape and size of Au NPs embedded in TiO₂ matrix present a novel oxide-metal hybrid material platform for optical property tuning and highly efficient plasmonic properties for future oxide-based photocatalytic sensors and devices.

Self-assembled vertically aligned Ni nanopillars in CeO2 with anisotropic magnetic and transport properties for energy applications

Self-assembled vertically aligned metal-oxide (Ni-CeO2) nanocomposite thin films with novel multifunctionalities have been successfully deposited by a one-step growth method. The novel nanocomposite structures presents high-density Ni-nanopillars vertically aligned in a CeO2 matrix. Strong and anisotropic magnetic properties have been demonstrated, with a saturation magnetization (Ms) of ∼175 emu cm-3 and ∼135 emu cm-3 for out-of-plane and in-plane directions, respectively. Such unique vertically aligned ferromagnetic Ni nanopillars in the CeO2 matrix have been successfully incorporated in high temperature superconductor YBa2Cu3O7 (YBCO) coated conductors as effective magnetic flux pinning centers. The highly anisotropic nanostructures with high density vertical interfaces between the Ni nanopillars and CeO2 matrix also promote the mixed electrical and ionic conductivities out-of-plane and thus demonstrate great potential as nanocomposite anode materials for solid oxide fuel cells and other potential applications requiring anisotropic ionic transport properties.

Nanoscale Artificial Plasmonic Lattice in Self-Assembled Vertically Aligned Nitride-Metal Hybrid Metamaterials

Nanoscale metamaterials exhibit extraordinary optical properties and are proposed for various technological applications. Here, a new class of novel nanoscale two-phase hybrid metamaterials is achieved by combining two major classes of traditional plasmonic materials, metals (e.g., Au) and transition metal nitrides (e.g., TaN, TiN, and ZrN) in an epitaxial thin film form via the vertically aligned nanocomposite platform. By properly controlling the nucleation of the two phases, the nanoscale artificial plasmonic lattices (APLs) consisting of highly ordered hexagonal close packed Au nanopillars in a TaN matrix are demonstrated. More specifically, uniform Au nanopillars with an average diameter of 3 nm are embedded in epitaxial TaN platform and thus form highly 3D ordered APL nanoscale metamaterials. Novel optical properties include highly anisotropic reflectance, obvious nonlinear optical properties indicating inversion symmetry breaking of the hybrid material, large permittivity tuning and negative permittivity response over a broad wavelength regime, and superior mechanical strength and ductility. The study demonstrates the novelty of the new hybrid plasmonic scheme with great potentials in versatile material selection, and, tunable APL spacing and pillar dimension, all important steps toward future designable hybrid plasmonic materials.

Thermal Driven Giant Spin Dynamics at Three-Dimensional Heteroepitaxial Interface in Ni0.5Zn0.5Fe2O4/BaTiO3-Pillar Nanocomposites

Traditional magnetostrictive/piezoelectric laminated composites rely on the two-dimensional interface that transfers stress/strain to achieve the large magnetoelectric (ME) coupling, nevertheless, they suffer from the theoretical limitation of the strain effect and of the substrate clamping effect in real ME applications. In this work, 3D NZFO/BTO-pillar nanocomposite films were grown on SrTiO₃ by template-assisted pulsed laser deposition, where BaTiO₃ (BTO) nanopillars appeared in an array with distinct phase transitions as the cores were covered by NiZn ferrite (NZFO) layer. The perfect 3D heteroepitaxial interface between BTO and NZFO phases can be identified without any edge dislocations, which allows effective strain transfer at the 3D interface. The 3D structure nanocomposites enable the strong two magnon scattering (TMS) effect that enhances ME coupling at the interface and reduces the clamping effect by strain relaxation. Thereby, a large FMR field shift of 1866 Oe in NZFO/BTO-pillar nanocomposite was obtained at the TMS critical angle near the BTO nanopillars phase transition of 255 K.

Microstructure, Magnetic, and Magnetoresistance Properties of La0.7Sr0.3MnO3:CuO Nanocomposite Thin Films

(La_0.7Sr_0.3MnO₃)_0.67:(CuO)_0.33 (LSMO:CuO) nanocomposite thin films were deposited on SrTiO₃ (001), LaAlO₃ (001), and MgO (001) substrates by pulsed laser deposition, and their microstructure as well as magnetic and magnetoresistance properties were investigated. X-ray diffraction (XRD) and transmission electron microscopy (TEM) results show that LSMO:CuO films grow as highly textured self-assembled vertically aligned nanocomposite (VAN), with a systematic domain structure and strain tuning effect based on the substrate type and laser deposition frequency. A record high low-field magnetoresistance (LFMR) value of ∼80% has been achieved in LSMO:CuO grown on LaAlO₃ (001) substrate under high frequency. Detailed analysis indicates that both the strain state and the phase boundary effect play a significant role in governing the overall LFMR behavior.

Monolithic Mid-Infrared Integrated Photonics Using Silicon-on-Epitaxial Barium Titanate Thin Films

Broadband mid-infrared (mid-IR) photonic circuits that integrate silicon waveguides and epitaxial barium titanate (BTO) thin films are demonstrated using the complementary metal-oxide-semiconductor process. The epitaxial BTO thin films are grown on lanthanum aluminate (LAO) substrates by the pulsed laser deposition technique, wherein a broad infrared transmittance between λ = 2.5 and 7 μm is observed. The optical waveguiding direction is defined by the high-refractive-index amorphous Si (a-Si) ridge structure developed on the BTO layer. Our waveguides show a sharp fundamental mode over the broad mid-IR spectrum, whereas its optical field distribution between the a-Si and BTO layers can be modified by varying the height of the a-Si ridge. With the advantages of broad mid-IR transparency and the intrinsic electro-optic properties, our monolithic Si on a ferroelectric BTO platform will enable tunable mid-IR microphotonics that are desired for high-speed optical logic gates and chip-scale biochemical sensors.

Self-assembled Co-BaZrO3 nanocomposite thin films with ultra-fine vertically aligned Co nanopillars

A simple one-step pulsed laser deposition (PLD) method has been applied to grow self-assembled metal-oxide nanocomposite thin films. The as-deposited Co-BaZrO₃ films show high epitaxial quality with ultra-fine vertically aligned Co nanopillars (diameter <5 nm) embedded in a BZO matrix. The diameter of the nanopillars can be further tuned by varying the deposition frequency. The metal and oxide phases grow separately without inter-diffusion or mixing. Taking advantage of this unique structure, a high saturation magnetization of ∼1375 emu cm^-3 in the Co-BaZrO₃ nanocomposites has been achieved and further confirmed by Lorentz microscopy imaging in TEM. Furthermore, the coercivity values of this nanocomposite thin films range from 600 Oe (20 Hz) to 1020 Oe (2 Hz), which makes the nanocomposite an ideal candidate for high-density perpendicular recording media.

Self-Organized Epitaxial Vertically Aligned Nanocomposites with Long-Range Ordering Enabled by Substrate Nanotemplating

Vertically aligned nanocomposites (VAN) thin films present as an intriguing material family for achieving novel functionalities. However, most of the VAN structures tend to grow in a random fashion, hindering the future integration in nanoscale devices. Previous efforts for achieving ordered nanopillar structures have been focused on specific systems, and rely on sophisticated lithography and seeding techniques, making large area ordering quite difficult. In this work, a new technique is presented to produce self-assembled nanocomposites with long-range ordering through selective nucleation of nanocomposites on termination patterned substrates. Specifically, SrTiO₃ (001) substrates have been annealed to achieve alternating chemical terminations and thus enable selective epitaxy during the VAN growth. La_0.7 Sr_0.3 MnO₃ :CeO₂ (LSMO):CeO₂ nanocomposites, as a prototype, are demonstrated to form well-ordered rows in matrix structure, with CeO₂ (011) domains selectively grown on SrO terminated area, showing enhanced functionality. This approach provides a large degree of long-range ordering for nanocomposite growth that could lead to unique functionalities and takes the nanocomposites one step closer toward future nanoscale device integration.

Enhanced Absorption Performance of Carbon Nanostructure Based Metamaterials and Tuning Impedance Matching Behavior by an External AC Electric Field

Metamaterials have surprisingly broadened the range of available practical applications in new devices such as shielding, microwave absorbing, and novel antennas. More research has been conducted related to tuning DNG frequency bands of ordered or disordered metamaterials, and far less research has focused on the importance of impedance matching behavior, with little effort and attention given to adjusting the magnitude of negative permittivity values. This is particularly important if devices deal with low-amplitude signals such as radio or TV antennas. The carbon/hafnium nickel oxide (C/Hf_0.9Ni_0.1O_y) nanocomposites with simultaneously negative permittivity and negative permeability, excellent metamaterial performance, and good impedance matching could become an efficient alternative for the ordered metamaterials in wave-transparent, microwave absorbing, and solar energy harvesting fields. In this study, we prepared C/Hf_0.9Ni_0.1O_y nanocomposites by the solvothermal method, and we clarified how the impedance matching and double-negative (DNG) behaviors of C/Hf_0.9Ni_0.1O_y can be tuned by an external AC electric field created by an electric quadrupole system. An external electric field allows for the alignment of the well-dispersed nanoparticles of carbon with long-range orientations order. We believe that this finding broadens our understanding of moderate conductive material-based random metamaterials (MCMRMs) and provides a novel strategy for replacing high-loss ordered or disordered metamaterials with MCMRMs.

Template-Free Growth of Well-Ordered Silver Nano Forest/Ceramic Metamaterial Films with Tunable Optical Responses

Currently, the limitations of conventional methods for fabricating metamaterials composed of well-aligned nanoscale inclusions either lack the necessary freedom to tune the structural geometry or are difficult for large-area synthesis. In this Communication, the authors propose a fabrication route to create well-ordered silver nano forest/ceramic composite single-layer or multi-layer vertically stacked structures, as a distinctive approach to make large-area nanoscale metamaterials. To take advantage of direct growth, the authors fabricate single-layer nanocomposite films with a well-defined sub-5 nm interwire gap and an average nanowire diameter of ≈3 nm. Further, artificially constructed multilayer metamaterial films are easily fabricated by vertical integration of different single-layer metamaterial films. Based upon the thermodynamics as well as thin film growth dynamics theory, the growth mechanism is presented to elucidate the formation of such structure. Intriguing steady and transient optical properties in these assemblies are demonstrated, owing to their nanoscale structural anisotropy. The studies suggest that the self-organized nanocomposites provide an extensible material platform to manipulate optical response in the region of sub-5 nm scale.

Self-Assembled, Nanostructured, Tunable Metamaterials via Spinodal Decomposition

Self-assembly via nanoscale phase separation offers an elegant route to fabricate nanocomposites with physical properties unattainable in single-component systems. One important class of nanocomposites are optical metamaterials which exhibit exotic properties and lead to opportunities for agile control of light propagation. Such metamaterials are typically fabricated via expensive and hard-to-scale top-down processes requiring precise integration of dissimilar materials. In turn, there is a need for alternative, more efficient routes to fabricate large-scale metamaterials for practical applications with deep-subwavelength resolution. Here, we demonstrate a bottom-up approach to fabricate scalable nanostructured metamaterials via spinodal decomposition. To demonstrate the potential of such an approach, we leverage the innate spinodal decomposition of the VO₂-TiO₂ system, the metal-to-insulator transition in VO₂, and thin-film epitaxy, to produce self-organized nanostructures with coherent interfaces and a structural unit cell down to 15 nm (tunable between horizontally and vertically aligned lamellae) wherein the iso-frequency surface is temperature-tunable from elliptic to hyperbolic dispersion producing metamaterial behavior. These results provide an efficient route for the fabrication of nanostructured metamaterials and other nanocomposites for desired functionalities.