Turning the Halide Switch in the Synthesis of Au-Pd Alloy and Core-Shell Nanoicosahedra with Terraced Shells: Performance in Electrochemical and Plasmon-Enhanced Catalysis

Synthesis of Solvent-Mediated Morphology-Controlled PdSn Alloy Nanocatalysts and their Application in Electrocatalysis of Ethylene Glycol and Ethanol

2D nanodendrites (NDs) and nanosheets (NSs) have been regarded as efficient nanocatalysts for enhancing the electrocatalytic performance due to their low coordinated sites and abundant electrocatalytic centers. Nevertheless, it remains challenging to construct advanced NDs and NSs in a single reaction system. Herein, by tuning the volume ratios of mixed solvents, the reduction and diffusion rate of Sn2+ on Pd NSs template was rationally controlled to prepare PdSn NDs and PdSn NSs. Ascribed to the open 2D nanostructure, high specific surface area, and robust synergistic effect, the as-prepared PdSn NDs and PdSn NSs exhibited distinguished electrocatalytic activities for ethylene glycol oxidation reaction (EGOR) and ethanol oxidation reaction (EOR), as well as commendable electrocatalytic durability, which were far superior to the Pd NSs and commercial Pd/C. In addition, the PdSn NDs exhibited enhanced reaction kinetics because the characteristic branch structure exposed a high density of active sites. This work may provide significant guidance for preparing excellent nanocatalysts with various morphological features by simply optimizing the content of the coexisting solvents.

Controlled gold-palladium cores in ceria hollow spheres as nanoreactor for plasmon-enhanced catalysis under visible light irradiation

Visible-light-driven organic transformations boosting by localized surface plasmon resonance (LSPR) have been attracting considerable interests. Gold-palladium (Au-Pd) bimetallic nanoparticles (NPs) are considered as ideal plasmonic catalysts realizing efficient light-driven catalysis. Nevertheless, stability and adjustability of plasmonic Au-Pd NPs remain to be a challenging task. Herein, we designed the controlled Au-Pd cores in ceria (CeO₂) hollow spheres (Au-Pd@h-CeO₂) as nanoreactor for Suzuki cross-coupling reactions. Under visible light irradiation, the Au-Pd@h-CeO₂ exhibited remarkable photocatalytic performance with a turnover frequency (TOF) value as high as 797 h^-1. More impressively, the coupling reactions of aryl chlorides bearing electron-withdrawing groups proceeded better and afforded the corresponding desired products in good yields. Detailed structural, optical and photoelectrochemical characterizations unraveled that the enhanced photocatalytic efficiency of Au-Pd@h-CeO₂ was attributed to the LSPR effect of controllable Au-Pd cores and their synergetic effect of hollow CeO₂ shells. The merits of this hollow sphere architecture lied on as followed: (I) Incident light could be reflected and refracted between the inner cores and outer shells, which extended the trapping of incident light, and then enhanced the light harvesting efficiency; (II) the mesoporous architecture of CeO₂ hollow spheres provided a huge specific surface area and numerous mesoporous channels, which could enhance the absorption of reactants and provided more active sites; (III) LSPR excitation of Au-Pd NPs and band-gap excitation of CeO₂ simultaneously occurred under visible light illumination, inducing a more efficient separation and transfer of charge carriers. Furthermore, due to the confinment effect of CeO₂ shells, the Au-Pd@h-CeO₂ exhibited an excellent reusability after six cycles without significant deactivation of yield. Our findings provided a facile way to design highly efficient plasmonic-enhanced photocatalysts utilized for catalytic organic reactions.

Designer Gold-Framed Palladium Nanocubes for Plasmon-Enhanced Electrocatalytic Oxidation of Ethanol

Surface plasmon of coinage metal nanostructures has been employed as a powerful route in boosting the performances in heterogenous catalysis. Development of efficient plasmonic nanocatalysts with high catalytic performance and efficient light harvesting properties is of vital importance. Herein, we rationally designed and synthesized a plasmonic nanocatalyst composed of Au-framed Pd nanocubes by an Ag(I)-assisted seed-mediated growth method. In the synthesis, the incorporation of Ag(I) suppresses the reduction of Au on the {100} surface of cubic Pd seeds and leads to the formation of Au nanoframes on the Pd nanocubes. The unique Au-framed Pd nanocubes can integrate the superior electrocatalytic of Pd and the outstanding plasmonic properties of Au. Thus, these nanostructures were employed as plasmonic nanocatalysts for plasmon-enhanced electrocatalytic oxidation of ethanol with improved stability.

Noble Metal-Based Multimetallic Nanoparticles for Electrocatalytic Applications

Noble metal-based multimetallic nanoparticles (NMMNs) have attracted great attention for their multifunctional and synergistic effects, which offer numerous catalytic applications. Combined experimental and theoretical studies have enabled formulation of various design principles for tuning the electrocatalytic performance through controlling size, composition, morphology, and crystal structure of the nanoparticles. Despite significant advancements in the field, the chemical synthesis of NMMNs with ideal characteristics for catalysis, including high activity, stability, product-selectivity, and scalability is still challenging. This review provides an overview on structure-based classification and the general synthesis of NMMN electrocatalysts. Furthermore, postsynthetic treatments, such as the removal of surfactants to optimize the activity, and utilization of NMMNs onto suitable support for practical electrocatalytic applications are highlighted. In the end, future direction and challenges associated with the electrocatalysis of NMMNs are covered.

PdAu-based nanotheranostic agent for photothermal initiation and oxygen-independent free radicals generation

Due to a rapid proliferation of tumor cells leading to high oxygen consumption, solid tumors generally have the characteristics of hypoxia, which greatly limits the effect of photodynamic therapy sensitivity...

Construction of Lattice Strain in Bimetallic Nanostructures and Its Effectiveness in Electrochemical Applications

Bimetallic nanocrystals (NCs), associated with various surface functions such as ligand effect, ensemble effect, and strain effect, exhibit superior electrocatalytic properties. The stress-induced surface strain effect can alter binding strength between the surface active sites and reactants as well as their intermediates, and the electrochemical performance of bimetallic NCs can be significantly facilitated by the lattice-strain modification via their morphologies, sizes, shell-thickness, surface defectiveness as well as compositions. In this review, an overview of fundamental principles, characterization techniques, and quantitative determination of the surface lattice strain is provided. Various strategies and synthesis efforts on creating lattice-strain-engineered bimetallic NCs, including the de-alloying process, atomic layer-by-layer deposition, thermal treatment evolution, one-pot synthesis, and other efforts are also discussed. It is further outlined how the lattice strain effect promotes electrochemical catalysis through the selected case studies. The reactions on oxygen reduction reaction, small molecular oxidation, water splitting reaction, and electrochemical carbon dioxide reduction reactions are focused. In particular, studies of lattice strain arisen from core-shell nanostructure and defectiveness are highlighted. Lastly, the potential challenges are summarized and the prospects of lattice-strain-based engineering on bimetallic nanocatalysts with suggestion and guidance of the future electrocatalyst design are envisioned.

Controlling alloy to core-shell structure transformation of Au-Pd icosahedral nanoparticles

The structure transformation between Au-Pd alloy and core-shell icosahedral nanoparticles was achieved by a one-step aqueous-phase strategy. This strategy provided a way to tune the structure and atomic distribution of Au-Pd icosahedral nanoparticles. It could modulate the electronic structure of Pd, achieving promoted electrocatalytic ability toward the hydrogen evolution reaction.

A AuNP-capped cage fluorescent biosensor based on controlled-release and cyclic enzymatic amplification for ultrasensitive detection of ATP

Gold nanodevices have attracted extensive interest in the detection of specific targets within cells. However, constructing gold sensing devices that can be activated by the simulation of remote applications remains a huge challenge. Here, we report a Au nanoparticle (AuNP)-capped cage fluorescent biosensor based on controlled-release and Exonuclease III (Exo III) assisted cyclic enzymatic amplification that can be activated by adenosine triphosphate (ATP). In the system, AuNPs were used as the building blocks to cap the pores of Au nanocages (AuNCs) loaded with Rhodamine B (RhB) molecules through the hybridization of DNA. The RhB fluorescent molecules were finally released with the help of Exo III in the presence of ATP for detection purposes. Ultimately, the biosensor leads to a wide linear ATP detection range from 1.0 × 10-9 to 1.0 × 10-7 M with a limit of detection (LOD) down to 0.88 nM. In addition, it also has good selectivity for ATP to distinguish between ATP and ATP analogues such as cytidine triphosphate (CTP), guanosine triphosphate (GTP), and uridine triphosphate (UTP). Therefore, as a convenient and sensitive biosensor, it is expected to be widely used in the biomedical field.

Wavelength-Dependent Nonlinear Absorption in Palladium Nanoparticles

This paper aims to study the nonlinear absorption characteristics of palladium nanoparticles (PdNPs) at off-resonant wavelengths. For this purpose, multi-wavelength (500–650 nm) nanosecond Z-scan technique was used. The experimental results indicate that saturated absorption (SA) and the transition from SA to reverse saturated absorption (RSA) can occur, and depends on the excitation wavelength and energy. When the excitation wavelength is constant, with the increase of excitation energy, PdNPs change from SA to RSA. When the excitation energy is constant, with the excitation wavelength approaching surface plasmon resonance (SPR), PdNPs change from SA to RSA. This phenomenon of SA and RSA under multi-wavelength excitation in the off-resonant region provides a supplement for the systematic study of the nonlinear absorption of PdNPs.

Catalytic Nanoframes and Beyond

The ever-increasing need for the production and expenditure of sustainable energy is a result of the astonishing rate of consumption of fossil fuels and the accompanying environmental problems. Emphasis is being directed to the generation of sustainable energy by the fuel cell and water splitting technologies. Accordingly, the development of highly efficient electrocatalysts has attracted significant interest, as the fuel cell and water splitting technologies are critically dependent on their performance. Among numerous catalyst designs under investigation, nanoframe catalysts have an intrinsically large surface area per volume and a tunable composition, which impacts the number of catalytically active sites and their intrinsic catalytic activity, respectively. Nevertheless, the structural integrity of the nanoframe during electrochemical operation is an ongoing concern. Some significant advances in the field of nanoframe catalysts have been recently accomplished, specifically geared to resolving the catalytic stability concerns and significantly boosting the intrinsic catalytic activity of the active sites. Herein, general synthetic concepts of nanoframe structures and their structure-dependent catalytic performance are summarized, along with recent notable advances in this field. A discussion on the remaining challenges and future directions, addressing the limitations of nanoframe catalysts, are also provided.

Proton exchange membrane with plasmon-active surface for enhancement of fuel cell effectivity

The action of fuel cells with proton-exchanged membranes (PEMs) requires the implementation of the hydrogen oxidation reaction (HOR) and the oxygen reduction reaction (ORR) on the opposite sides of the PEMs. Recently, based on several models of electrochemical reactions a significant decrease in the thermodynamic activation barrier of both reactions under plasmon assistance was reported. In this work, we propose the design of a PEM fuel cell with a plasmon-active catalytic surface providing plasmonic triggering and enhancement of fuel cell efficiency. In particular, we deposited bimetallic (Au@Pt) nanostructures on the PEM surface and integrated them into the fuel cell design. Plasmon excitation occurs on the Au nanostructures under light illumination at the corresponding NIR wavelength, while the Pt shell is responsible for the introduction of catalytic sites. Light illumination results in a significant enhancement of the electric current produced by the fuel cell. In particular, the electric current increased several times. Control experiments indicated that the observed enhancement takes place only when the light wavelength is in compliance with the plasmon absorption band and the contribution from thermal effects is negligible. The present approach for the introduction of plasmon assistance into the design of advanced fuel cells makes them suitable for increasing the fuel cell efficiency under sunlight.

Controlled Fabrication of Flower-Shaped Au-Cu Nanostructures Using a Deep Eutectic Solvent and Their Performance in Surface-Enhanced Raman Scattering-Based Molecular Sensing

Controlled synthesis of anisotropic bimetallic nanostructures with tunable morphology is of great current interest for their applications in surface-enhanced Raman scattering (SERS), plasmonics, and catalysis. Despite huge effort that has been devoted so far, fabrication of bimetallic nanostructures with controlled morphology and size remained to be a great challenge, especially when their shapes are anisotropic. Here, we report a facile, one-step synthetic approach for the fabrication of anisotropic bimetallic gold-copper nanostructures (Au-Cu NSs) of the 200-300 nm size range, using choline chloride/urea (ChCl/urea)-based deep eutectic solvent (DES) as the soft template. A concentration of the CuCl₂ precursor in the reaction mixture was found to impact the reduction kinetics of the metal ions, directly affecting the final morphology of the Au-Cu nanostructures and elemental distributions in them. The fabricated anisotropic Au-Cu NSs revealed a high SERS signal for crystal violet (CV) molecules adsorbed at their surfaces, with the signal enhancement factor as high as 0.21 × 10⁶ and capacity of detecting CV molecules of concentrations as low as 10^-10 M in their aqueous solutions. The growth mechanism of the anisotropic bimetallic nanostructures in DES and their SERS performance has been discussed. The simple DES-assisted synthesis strategy presented in this work can be adopted for large-scale nonaqueous fabrication of other bimetallic nanostructures in a quite "greener" way.

Bimetallic Pd96Fe4 nanodendrites embedded in graphitic carbon nanosheets as highly efficient anode electrocatalysts

A facile route to anchor a nanoalloy catalyst on graphitic carbon nanosheets (GCNs) has been developed for preparing high-performance electrode materials for application in direct alcohol fuel cells (DAFCs). Uniformly dispersed bimetallic Pd-Fe nanoparticles (NPs) with tunable composition have been immobilized on GCNs derived from mesocarbon microbeads (MCMBs) by a one-pot radiolytic reduction method. The Pd-Fe/GCN hybrid shows promising electrocatalytic activity for the methanol, ethanol, ethylene glycol, tri-ethylene glycol and glycerol oxidation reactions in alkaline medium. The as-prepared flower-shape Pd₉₆Fe₄/GCN nanohybrids have high mass activity for the ethanol oxidation reaction (EOR), which is ∼36 times (11 A per mg Pd) higher than that of their monometallic counterparts. Moreover, the onset oxidation potential for the EOR on the Pd₉₆Fe₄/GCN nanohybrids negatively shifts ca. 780 mV compared to that on commercial Pd/C electrocatalysts, suggesting fast kinetics and superior electrocatalytic activity. Additionally, chronoamperometry measurements display good long-term cycling stability of the Pd₉₆Fe₄/GCN nanohybrids for the EOR and also demonstrate only ∼7% loss in forward current density after 1000 cycles. The superior catalytic activity and stability may have originated from the modified electronic structure of the Pd-Fe nanoalloys and excellent physicochemical properties of the graphitic nanosheets. The present synthetic route using GCNs as the supporting material will contribute to further design of multimetallic nanoarchitectures with controlled composition and desired functions for fuel cell applications.

Tunable bimetallic Au-Pd@CeO2 for semihydrogenation of phenylacetylene by ammonia borane

The fabrication of a bimetallic core and ceria shell nanostructure is considered a promising way to promote catalytic performance and stability. Here, we report an Au-Pd@CeO2 core-shell structure with a tunable Au/Pd ratio through a self-assembly autoredox reaction approach. This process involves the sequence reduction of Au and Pd precursors and then self-assembly of CeO2 nanoparticles to encapsulate the noble metal core. The as-obtained samples exhibit excellent activity and selectivity towards the ammonia borane initiated hydrogenation of phenylacetylene with an enhanced stability owing to the protection from outside CeO2 nanoparticles. Through the construction of an Au-Pd bimetallic structure, an electron modification of Pd due to charge transfer between Au and Pd results in an enhanced catalytic performance. Such a strategy is promising for the synthesis of other bimetallic noble core and ceria shell structures for further applications.

Monodisperse ordered indium-palladium nanoparticles: synthesis and role of indium for boosting superior electrocatalytic activity for ethanol oxidation reaction

The slow kinetics of ethanol oxidation reaction (EOR) has limited its widespread use for fuel cells. Bimetallic catalysts with optimized surface compositions can considerably govern rate-determining steps through selectivity for CH3COOH formation or by facilitating the adsorption of OHadsvia the bifunctional effect of an alloy to increase the EOR's kinetic rates. Here, we reported monodisperse ordered In-Pd nanoparticles as new bimetallic high-performance catalysts for EOR. In-Pd nanoparticles, i.e., In3Pd2 and In3Pd5 were prepared using arrested precipitation in solution, and their composition, structures, phase and crystallinity were confirmed using a variety of analyses including TEM, XPS, EDS and XRD. In-Pd nanoparticles were loaded on carbon black (Vulcan XC-72) as electrocatalysts for EOR in alkaline media. In3Pd2 and In3Pd5 nanoparticles exhibited 5.8 times and 4.0 times higher mass activities than commercial Pd/C, which showed that the presence of indium greatly boosts electrocatalytic reactivity for EOR of Pd catalysts. This performance is the best among those of bimetallic nanoparticles reported to date. Such high performance of In-Pd nanoparticles may be attributed to the following two reasons. First, In-Pd nanoparticles exhibited excellent CO anti-poison ability, as confirmed by CO striping experiments. Second, as revealed by DFT calculations of metals with OHads adsorption, In atoms on In3Pd2 surface exhibited the lowest energy (-1.659 eV) for OHads adsorption as compared to other common oxophilic metals including Sn, SnPt, Ag, Ge, Co, Pb, and Cu. We propose that the presence of indium sites promoted efficient free OH radical adsorption on indium sites and resulted in a faster reaction rate of acetate formation from acetaldehyde (the rate determining step for EOR on Pd sites). Finally, a single direct ethanol fuel cell (DEFC) with Pd/C anode was prepared. Compared to the results for a commercial Pd/C anode, the open circuit voltage (OCV) of In3Pd2/C improved by 0.25 V (from 0.64 to 0.89 V) and the power density improved by ∼80% (from 3.7 to 6.7 mW cm-2), demonstrating its practical uses as Pt or Pd catalyst alternatives for DEFC.

Interface-Controlled Synthesis of Au-BINOL Hybrid Nanostructures and Mechanism Study

The combined functionality of components in organic-inorganic hybrid nanomaterials render them efficient nanoreactors. However, the development in this field is limited due to a lack of synthetic avenues and systematic control of the growth kinetics of hybrid structures. In this work, we take advantage of an ionic switch for regio-control of Au-BINOL(1,1'-Bi-2-naphthol) hybrid nanostructures. Aromatic BINOL molecules assemble into nanospheres, concomitant with the growth of the Au nanocrystals. The morphological evolution of Au nanocrystals is solely controlled by the presence of halides in the synthetic system. Here we show that quaternary ammonium surfactants (CTAB or CTAC), not only bridging Au and BINOL, but also contributing to the formation of concentric or eccentric structures when their concentrations are tuned to the range of 10^-5 to 10^-3 M. This facile strategy offers the potential advantage of scalable production, with diverse functional organic-inorganic hybrid nanocomposites being produced based on the specific archetype of Au-BINOL hybrid nanocomposites.

Seed-Mediated Growth of Ag@Au Nanodisks with Improved Chemical Stability and Surface-Enhanced Raman Scattering

Bimetallic Ag@Au nanoparticles (NPs) have received significant research interest because of their unique optical properties and molecular sensing ability through surface-enhanced Raman scattering (SERS). However, the synthesis of Ag@Au core-shell plasmonic nanostructures with precisely controlled size and shape remained a great challenge. Here, we report a simple approach for the synthesis of bimetallic Ag@Au nanodisks of about 13.5 nm thickness and different diameters through a seed-mediated growth process. The synthesis involves the conformal deposition of Au atoms at the corner sites of Ag nanoplate (AgNPL) seeds coupled with site-selective oxidative etching of AgNPL edges to generate Ag@Au nanodisks. The resultant Ag@Au nanodisks manifest significantly improved chemical stability and tunable localized surface plasmon resonance from the visible to the near-infrared spectral range. Moreover, in comparison to AgNPLs, the Ag@Au nanodisks showed greatly enhanced SERS performance with an enhancement factor up to 0.47 × 10⁵, which is nearly 3-fold higher than that of the original AgNPLs (0.18 × 10⁵). Furthermore, the Ag@Au nanodisks show a high sensitivity for detecting probe molecules such as crystal violet of concentration as low as 10^-9 M and excellent reproducibility, with the SERS intensity fluctuation less than 12.5%. The synthesis route adapted for the controlled fabrication of Ag@Au nanodisks can be a potential platform for maneuvering other bimetallic plasmonic nanostructures useful for plasmonics and sensing applications.

The Many "Facets" of Halide Ions in the Chemistry of Colloidal Inorganic Nanocrystals

Over the years, scientists have identified various synthetic "handles" while developing wet chemical protocols for achieving a high level of shape and compositional complexity in colloidal nanomaterials. Halide ions have emerged as one such handle which serve as important surface active species that regulate nanocrystal (NC) growth and concomitant physicochemical properties. Halide ions affect the NC growth kinetics through several means, including selective binding on crystal facets, complexation with the precursors, and oxidative etching. On the other hand, their presence on the surfaces of semiconducting NCs stimulates interesting changes in the intrinsic electronic structure and interparticle communication in the NC solids eventually assembled from them. Then again, halide ions also induce optoelectronic tunability in NCs where they form part of the core, through sheer composition variation. In this review, we describe these roles of halide ions in the growth of nanostructures and the physical changes introduced by them and thereafter demonstrate the commonality of these effects across different classes of nanomaterials.

High-efficient catalytic reduction of 4-nitrophenol based on reusable Ag nanoparticles/graphene-loading loofah sponge hybrid

Noble metal nanoparticles (NPs) such as Au and Ag have shown many applications in the field of catalysis, sensing etc. due to their excellent photoelectric properties. But agglomeration and a low recovery rate are big problems for their applications. In this research, a novel Ag NPs/graphene (reduced graphene oxide)-loading loofah sponge (Ag NPs/RGO-LS) was synthesized through a one-step reduction method. Where the RGO is used as a nano-support with the high specific surface area and the high conductivity to prevent the agglomeration of Ag NPs and provide a conductive layer. The natural, green, low-cost and high-yield LS is designed as a macro-support to reduce the loss of Ag NPs during recycling. The as-prepared Ag NPs/RGO-LS is stable, uniform, and exhibits high efficiency and reusability in the catalytic reduction of 4-nitrophenol (4-NP) with a high rate constant of 1.893 min^-1 as well as an average conversion of 98% in 6 min during five cycles. The results have not only paved the way for the wide application of Ag NPs but also provide a new road for the application of other metal NPs.

General Synthetic Route toward Highly Dispersed Ultrafine Pd-Au Alloy Nanoparticles Enabled by Imidazolium-Based Organic Polymers

Bimetallic Pd-Au nanoparticles (NPs) usually show superior catalytic performances over their single-component counterparts, the general and facile synthesis of subnanometer-scaled Pd-Au NPs still remains a great challenge, especially for electronegative ultrafine bimetallic NPs. Here, we develop an anion-exchange strategy for the synthesis of ultrafine Pd-Au alloy NPs. Simple treatment of main-chain imidazolium-based organic polymer (IOP) with HAuCl₄ and Na₂PdCl₄, followed by reduction with NaBH₄ generated Pd-Au alloy NPs (Pd-Au/IOP). These NPs possess an unprecedented tiny size of 1.50 ± 0.20 nm and are uniformly dispersed over IOP. The electronic structure of the surface Pd and Au atoms is optimized via electron exchange during alloying, a net charge flowing resulting from counteranions is injected into Au and Pd to form a strong ensemble effect, which is responsible for a remarkably higher catalytic activity of Pd-Au/IOP in the hydrolytic dehydrogenation of ammonia borane than those of monometallic counterparts.

Reduction rate as a quantitative knob for achieving deterministic synthesis of colloidal metal nanocrystals

Despite the incredible developments made to the synthesis of colloidal metal nanocrystals, it is still challenging to produce them in a reproducible and predictable manner. This drawback can be attributed to the fact that the protocols continue to be built upon qualitative observations and empirical laws. Because of the vast number of intricately entangled experimental parameters in a synthesis, it is almost impossible to predict and control the outcome by knowingly alternating these parameters. In this Perspective article, we discuss the recent efforts in pushing nanocrystal synthesis towards a deterministic process based upon quantitative measurements. In particular, we focus on how the reduction rate of a salt precursor can be used as a quantitative knob for predicting and controlling the outcomes of both nucleation and growth. We begin with a brief introduction to the techniques that have been used to extract the kinetic information of a synthesis and then discuss how the reduction rate is correlated with the defect structure, shape/morphology, and elemental distribution of the resultant nanocrystals. We conclude by highlighting some of the recent advances related to in situ probing of nanocrystal synthesis, with an emphasis on the real-time, quantitative aspects with regard to both nucleation and growth.

Serrated Au/Pd Core/Shell Nanowires with Jagged Edges for Boosting Liquid Fuel Electrooxidation

Integration of 1D, core/shell, and jagged features into one entity may provide a promising avenue for further enhancing catalyst performance. However, designing such unique nanostructures is extremely challenging. Herein, 1D serrated Au/Pd core/shell nanowires (CSNWs) with jagged edges were produced simply by a one-pot, dual-capping-agent-assisted method involving co-reduction, galvanic replacement, directional coalescence of preformed nanoparticles, and site-selective epitaxial growth of Pd. Au/PdCSNWs, compared with the commercially available Pd/C, exhibited enhanced electrocatalytic performance towards liquid fuel oxidation because of the synergistic effect of the electronic structure and low-coordinated jagged edges.

Tuning and Locking the Localized Surface Plasmon Resonances of CuS (Covellite) Nanocrystals by an Amorphous CuPd x S Shell

We demonstrate the stabilization of the localized surface plasmon resonance (LSPR) in a semiconductor-based core-shell heterostructure made of a plasmonic CuS core embedded in an amorphous-like alloyed CuPd _x S shell. This heterostructure is prepared by reacting the as-synthesized CuS nanocrystals (NCs) with Pd²⁺ cations at room temperature in the presence of an electron donor (ascorbic acid). The reaction starts from the surface of the CuS NCs and proceeds toward the center, causing reorganization of the initial lattice and amorphization of the covellite structure. According to density functional calculations, Pd atoms are preferentially accommodated between the bilayer formed by the S-S covalent bonds, which are therefore broken, and this can be understood as the first step leading to amorphization of the particles upon insertion of the Pd²⁺ ions. The position and intensity in near-infrared LSPRs can be tuned by altering the thickness of the shell and are in agreement with the theoretical optical simulation based on the Mie-Gans theory and Drude model. Compared to the starting CuS NCs, the amorphous CuPd _x S shell in the core-shell nanoparticles makes their plasmonic response less sensitive to a harsh oxidation environment (generated, for example, by the presence of I₂).

One-step catalytic reduction of 4-nitrophenol through the direct injection of metal salts into oxygen-depleted reactants

The one-step catalytic reduction of 4-nitrophenol using nanoparticles derived from the injection of metal salts leads to benchmark-setting turnover frequencies.

Enhanced photoelectrochemical water oxidation performance of a hematite photoanode by decorating with Au–Pt core–shell nanoparticles

The charge transfer process of the AuPt/α-Fe₂O₃ composite photoanode for photoelectrochemical water oxidation.

A general seed-mediated approach to the synthesis of AgM (M = Au, Pt, and Pd) core–shell nanoplates and their SERS properties

Graphical abstract describing a general pH-dependent synthetic steps for the preparation of AgM (Au, Pt and Pd) triangular core–shell nanoplates and hollow nanoframes.