Efficient Extraction of Light from a Nitrogen-Vacancy Center in a Diamond Parabolic Reflector

Broadband Light Extraction from Near-Surface NV Centers Using Crystalline-Silicon Antennas

We use crystalline silicon (Si) antennas to efficiently extract broadband single-photon fluorescence from shallow nitrogen-vacancy (NV) centers in diamond into free space. Our design features relatively easy-to-pattern high-index Si resonators on the diamond surface to boost photon extraction by overcoming total internal reflection and Fresnel reflection at the diamond-air interface and providing modest Purcell enhancement, without etching or otherwise damaging the diamond surface. In simulations, ∼17 times more single photons are collected from a single NV center compared to the case without the antenna; in experiments, we observe an enhancement of ∼9 times, limited by spatial alignment between the NV and the antenna. Our approach can be readily applied to other color centers in diamond, and more generally to the extraction of light from quantum emitters in wide-bandgap materials.

Roadmap on nanoscale magnetic resonance imaging

The field of nanoscale magnetic resonance imaging (NanoMRI) was started 30 years ago. It was motivated by the desire to image single molecules and molecular assemblies, such as proteins and virus particles, with near-atomic spatial resolution and on a length scale of 100 nm. Over the years, the NanoMRI field has also expanded to include the goal of useful high-resolution nuclear magnetic resonance (NMR) spectroscopy of molecules under ambient conditions, including samples up to the micron-scale. The realization of these goals requires the development of spin detection techniques that are many orders of magnitude more sensitive than conventional NMR and MRI, capable of detecting and controlling nanoscale ensembles of spins. Over the years, a number of different technical approaches to NanoMRI have emerged, each possessing a distinct set of capabilities for basic and applied areas of science. The goal of this roadmap article is to report the current state of the art in NanoMRI technologies, outline the areas where they are poised to have impact, identify the challenges that lie ahead, and propose methods to meet these challenges. This roadmap also shows how developments in NanoMRI techniques can lead to breakthroughs in emerging quantum science and technology applications.

Multicone Diamond Waveguides for Nanoscale Quantum Sensing

The long-lived electronic spin of the nitrogen-vacancy (NV) center in diamonds is a promising quantum sensor for detecting nanoscopic magnetic and electric fields in various environments. However, the poor signal-to-noise ratio (SNR) of prevalent optical spin-readout techniques presents a critical challenge in improving measurement sensitivity. Here, we address this limitation by coupling individual NVs to optimized diamond nanopillars, thereby enhancing the collection efficiency of fluorescence. Guided by near-field optical simulations, we predict improved performance for tall (≥5 μm) pillars with tapered sidewalls. This is subsequently verified by fabricating and characterizing a representative set of structures using a newly developed nanofabrication process. We observe increased SNR for optimized devices, owing to improved emission collimation and directionality. Promisingly, these devices are compatible with low-numerical-aperture collection optics and a reduced tip radius, reducing experimental overhead and facilitating improved spatial resolution for scanning applications.

A Fiber-Coupled Scanning Magnetometer with Nitrogen-Vacancy Spins in a Diamond Nanobeam

Magnetic imaging with nitrogen-vacancy (NV) spins in diamond is becoming an established tool for studying nanoscale physics in condensed matter systems. However, the optical access required for NV spin readout remains an important hurdle for operation in challenging environments such as millikelvin cryostats or biological systems. Here, we demonstrate a scanning-NV sensor consisting of a diamond nanobeam that is optically coupled to a tapered optical fiber. This nanobeam sensor combines a natural scanning-probe geometry with high-efficiency through-fiber optical excitation and readout of the NV spins. We demonstrate through-fiber optically interrogated electron spin resonance and proof-of-principle magnetometry operation by imaging spin waves in an yttrium-iron-garnet thin film. Our scanning-nanobeam sensor can be combined with nanophotonic structuring to control the light-matter interaction strength and has potential for applications that benefit from all-fiber sensor access, such as millikelvin systems.

Robustness improvement of a nitrogen-vacancy magnetometer by a double driving method

The nitrogen vacancy (NV) color center in diamonds is an electron spin that can measure magnetic fields with high sensitivity and resolution. Furthermore, the robustness of an NV-based quantum system should be improved for further application in other sensing methods and in the exploration of basic physics. In this work, the robustness of an NV magnetometer is improved by the double driving method. The sensitivity of the NV magnetometer was improved 2.1 times by strengthening the pumping power from 100 to 600 mW. In this process, thermal drift was introduced, which affects the measurement accuracy. The temperature drift of a diamond matrix was measured using an infrared camera, and the temperature change of a diamond host drifted to ∼80 K under high laser and microwave power. To address the drift of temperature owing to sensitivity improvement by pumping enhancement, the double driving method was introduced, to suppress the drift of the resonance frequency, to improve the robustness of a continuous-wave NV magnetometer. The magnetic noise density was improved from 10 to 1.2 nT/Hz1/2. This study checked the source of temperature noise in the process of measuring with the NV color centers and proposes a double driving measurement method to track the resonant frequency change due to environmental temperature drift and improve sensitivity. The findings of this study are useful in applying complex pulse protocols in high-level sensing applications based on solid-state spin.

CSRR Structure Design for NV Spin Manipulation with Microwave Strength and Fluorescence Collection Synchronous Enhancement

In this work, we designed, simulated, and tested a complementary split ring resonator (CSRR) for the purpose of applying a strong and uniform microwave field for the manipulation of nitrogen vacancy (NV) ensembles. This structure was fabricated by etching two concentric rings on a flat metal film that was deposited on a printed circuit board. A metal transmission on the back plane was used as the feed line. The fluorescence collection efficiency was improved by about 2.5 times with the CSRR structure compared to that without CSRR. Furthermore, the maximum Rabi frequency could reach 11.3 MHz, and the Rabi frequency variation was smaller than 2.8% in an area of 250 × 75 μm. This could pave the way to achieving high-efficiency control of the quantum state for spin-based sensor applications.

Nanophotonic quantum sensing with engineered spin-optic coupling

Nitrogen vacancy centers in diamond provide a spin-based qubit system with long coherence time even at room temperature, making them suitable ambient-condition quantum sensors for quantities including electromagnetic fields, temperature, and rotation. The optically addressable level structures of NV spins allow transduction of spin information onto light-field intensity. The sub-optimal readout fidelity of conventional fluorescence measurement remains a significant drawback for room-temperature ensemble sensing. Here, we discuss nanophotonic interfaces that provide opportunities to achieve near-unity readout fidelity based on IR absorption via resonantly enhanced spin-optic coupling. Spin-coupled resonant nanophotonic devices are projected to particularly benefit applications that utilize micro- to nanoscale sensing volume and to outperform present methods in their volume-normalized sensitivity.

Diamond surface engineering for molecular sensing with nitrogen-vacancy centers

Quantum sensing using optically addressable atomic-scale defects, such as the nitrogen-vacancy (NV) center in diamond, provides new opportunities for sensitive and highly localized characterization of chemical functionality. Notably, near-surface defects facilitate detection of the minute magnetic fields generated by nuclear or electron spins outside of the diamond crystal, such as those in chemisorbed and physisorbed molecules. However, the promise of NV centers is hindered by a severe degradation of critical sensor properties, namely charge stability and spin coherence, near surfaces (< ca. 10 nm deep). Moreover, applications in the chemical sciences require methods for covalent bonding of target molecules to diamond with robust control over density, orientation, and binding configuration. This forward-looking Review provides a survey of the rapidly converging fields of diamond surface science and NV-center physics, highlighting their combined potential for quantum sensing of molecules. We outline the diamond surface properties that are advantageous for NV-sensing applications, and discuss strategies to mitigate deleterious effects while simultaneously providing avenues for chemical attachment. Finally, we present an outlook on emerging applications in which the unprecedented sensitivity and spatial resolution of NV-based sensing could provide unique insight into chemically functionalized surfaces at the single-molecule level.

Self-aligned patterning technique for fabricating high-performance diamond sensor arrays with nanoscale precision

Efficient, nanoscale precision alignment of defect center creation in photonics structures in challenges the realization of high-performance photonic devices and quantum technology applications. Here, we propose a facile self-aligned patterning technique based on conventional engineering technology, with doping precision that can reach ~15 nm. We demonstrate this technique by fabricating diamond nanopillar sensor arrays with high consistency and near-optimal photon counts. The sensor array achieves high yield approaching the theoretical limit, and high efficiency for filtering sensors with different numbers of nitrogen vacancy centers. Combined with appropriate crystal orientation, the system achieves a saturated fluorescence rate of 4.34 Mcps and effective fluorescence-dependent detection sensitivity of 1800 cps^-1/2 . These sensors also show enhanced spin properties in the isotope-enriched diamond. Our technique is applicable to all similar solid-state systems and could facilitate the development of parallel quantum sensing and scalable information processing.

Field-based design of a resonant dielectric antenna for coherent spin-photon interfaces

We propose a field-based design for dielectric antennas to interface diamond color centers in dielectric membranes with a Gaussian propagating far field. This antenna design enables an efficient spin-photon interface with a Purcell factor exceeding 400 and a 93% mode overlap to a 0.4 numerical aperture far-field Gaussian mode. The antenna design with the back reflector is robust to fabrication imperfections, such as variations in the dimensions of the dielectric perturbations and the emitter dipole location. The field-based dielectric antenna design provides an efficient free-space interface for closely packed arrays of quantum memories for multiplexed quantum repeaters, arrayed quantum sensors, and modular quantum computers.

Recent Advances in Single Crystal Diamond Device Fabrication for Photonics, Sensing and Nanomechanics

In the last two decades, the use of diamond as a material for applications in nanophotonics, optomechanics, quantum information, and sensors tremendously increased due to its outstanding mechanical properties, wide optical transparency, and biocompatibility. This has been possible owing to advances in methods for growth of high-quality single crystal diamond (SCD), nanofabrication methods and controlled incorporation of optically active point defects (e.g., nitrogen vacancy centers) in SCD. This paper reviews the recent advances in SCD nano-structuring methods for realization of micro- and nano-structures. Novel fabrication methods are discussed and the different nano-structures realized for a wide range of applications are summarized. Moreover, the methods for color center incorporation in SCD and surface treatment methods to enhance their properties are described. Challenges in the upscaling of SCD nano-structure fabrication, their commercial applications and future prospects are discussed.

Diamond photonic crystal mirror with a partial bandgap by two 2D photonic crystal layers

In this study, photonic crystals with a partial bandgap are demonstrated in the visible region using single-crystal diamonds. Quasi-three-dimensional photonic crystal structures are fabricated in the surface of the single-crystal diamonds using a tetrahedron Faraday cage that enables angled dry etching in three directions simultaneously. The reflection spectra can be controlled by varying the lattice constant of the photonic crystals. In addition, nitrogen-vacancy center single-photon sources are implanted on top of the diamond photonic crystals, and doubled collection efficiency from the light sources is achieved.

Repetitive readout enhanced by machine learning

Single-shot readout is a key component for scalable quantum information processing. However, many solid-state qubits with favorable properties lack the single-shot readout capability. One solution is to use the repetitive quantum-non-demolition readout technique, where the qubit is correlated with an ancilla, which is subsequently read out. The readout fidelity is therefore limited by the back-action on the qubit from the measurement. Traditionally, a threshold method is taken, where only the total photon count is used to discriminate qubit state, discarding all the information of the back-action hidden in the time trace of repetitive readout measurement. Here we show by using machine learning (ML), one obtains higher readout fidelity by taking advantage of the time trace data. ML is able to identify when back-action happened, and correctly read out the original state. Since the information is already recorded (but usually discarded), this improvement in fidelity does not consume additional experimental time, and could be directly applied to preparation-by-measurement and quantum metrology applications involving repetitive readout.

Single Photons Emitted by Nanocrystals Optically Trapped in a Deep Parabolic Mirror

We investigate the emission of single photons from CdSe/CdS dots-in-rod which are optically trapped in the focus of a deep parabolic mirror. Thanks to this mirror, we are able to image almost the full 4π emission pattern of nanometer-sized elementary dipoles and verify the alignment of the rods within the optical trap. From the motional dynamics of the emitters in the trap, we infer that the single-photon emission occurs from clusters comprising several emitters. We demonstrate the optical trapping of rod-shaped quantum emitters in a configuration suitable for efficiently coupling an ensemble of linear dipoles with the electromagnetic field in free space.

Entanglement between a Diamond Spin Qubit and a Photonic Time-Bin Qubit at Telecom Wavelength

We report on the realization and verification of quantum entanglement between a nitrogen-vacancy electron spin qubit and a telecom-band photonic qubit. First we generate entanglement between the spin qubit and a 637 nm photonic time-bin qubit, followed by photonic quantum frequency conversion that transfers the entanglement to a 1588 nm photon. We characterize the resulting state by correlation measurements in different bases and find a lower bound to the Bell state fidelity of ≥0.77±0.03. This result presents an important step towards extending quantum networks via optical fiber infrastructure.

A monolithic immersion metalens for imaging solid-state quantum emitters

Quantum emitters such as the diamond nitrogen-vacancy (NV) center are the basis for a wide range of quantum technologies. However, refraction and reflections at material interfaces impede photon collection, and the emitters’ atomic scale necessitates the use of free space optical measurement setups that prevent packaging of quantum devices. To overcome these limitations, we design and fabricate a metasurface composed of nanoscale diamond pillars that acts as an immersion lens to collect and collimate the emission of an individual NV center. The metalens exhibits a numerical aperture greater than 1.0, enabling efficient fiber-coupling of quantum emitters. This flexible design will lead to the miniaturization of quantum devices in a wide range of host materials and the development of metasurfaces that shape single-photon emission for coupling to optical cavities or route photons based on their quantum state.

Photon collection from quantum emitters is difficult, and their scale requires the use of free-space optical measurement setups which prevent packaging of quantum devices. Here, the authors design and fabricate a metasurface that acts as an immersion lens to collect and collimate the emission of an individual emitter.

Three-dimensional localization spectroscopy of individual nuclear spins with sub-Angstrom resolution

Nuclear magnetic resonance (NMR) spectroscopy is a powerful method for analyzing the chemical composition and molecular structure of materials. At the nanometer scale, NMR has the prospect of mapping the atomic-scale structure of individual molecules, provided a method that can sensitively detect single nuclei and measure inter-atomic distances. Here, we report on precise localization spectroscopy experiments of individual 13C nuclear spins near the central electronic sensor spin of a nitrogen-vacancy (NV) center in a diamond chip. By detecting the nuclear free precession signals in rapidly switchable external magnetic fields, we retrieve the three-dimensional spatial coordinates of the nuclear spins with sub-Angstrom resolution and for distances beyond 10 Å. We further show that the Fermi contact contribution can be constrained by measuring the nuclear g-factor enhancement. The presented method will be useful for mapping atomic positions in single molecules, an ambitious yet important goal of nanoscale nuclear magnetic resonance spectroscopy.

Ultrabright Room-Temperature Sub-Nanosecond Emission from Single Nitrogen-Vacancy Centers Coupled to Nanopatch Antennas

Solid-state quantum emitters are in high demand for emerging technologies such as advanced sensing and quantum information processing. Generally, these emitters are not sufficiently bright for practical applications, and a promising solution consists in coupling them to plasmonic nanostructures. Plasmonic nanostructures support broadband modes, making it possible to speed up the fluorescence emission in room-temperature emitters by several orders of magnitude. However, one has not yet achieved such a fluorescence lifetime shortening without a substantial loss in emission efficiency, largely because of strong absorption in metals and emitter bleaching. Here, we demonstrate ultrabright single-photon emission from photostable nitrogen-vacancy (NV) centers in nanodiamonds coupled to plasmonic nanocavities made of low-loss single-crystalline silver. We observe a 70-fold difference between the average fluorescence lifetimes and a 90-fold increase in the average detected saturated intensity. The nanocavity-coupled NVs produce up to 35 million photon counts per second, several times more than the previously reported rates from room-temperature quantum emitters.