Nanovoid Membranes Embedded with Hollow Zwitterionic Nanocapsules for a Superior Desalination Performance

Ice-confined synthesis of highly ionized 3D-quasilayered polyamide nanofiltration membranes

Existing polyamide (PA) membrane synthesis protocols are underpinned by controlling diffusion-dominant liquid-phase reactions that yield subpar spatial architectures and ionization behavior. We report an ice-confined interfacial polymerization strategy to enable the effective kinetic control of the interfacial reaction and thermodynamic manipulation of the hexagonal polytype (Ih) ice phase containing monomers to rationally synthesize a three-dimensional quasilayered PA membrane for nanofiltration. Experiments and molecular simulations confirmed the underlying membrane formation mechanism. Our ice-confined PA nanofiltration membrane features high-density ionized structure and exceptional transport channels, realizing superior water permeance and excellent ion selectivity.

N-Oxide Zwitterion Functionalized Positively Charged Polyamide Composite Membranes for Nanofiltration

N-Oxide zwitterionic polyethyleneimine (ZPEI), a new kind of aqueous phase monomer synthesized by commercially branched polyethyleneimine (PEI) via oxidation reaction, was prepared for fabrication of thin-film composite (TFC) polyamide membranes via interfacial polymerization. The main factors, including the monomer concentration and immersion time of the aqueous phase and organic phase, were investigated. Compared with PEI-TFC membranes, the obtained optimal defect-free ZPEI-TFC membranes exhibited a lower roughness (3.3 ± 0.3 nm), a better surface hydrophilicity, and a smaller pore size (238 Da of MWCO). The positively charged ZPEI-TFC membranes (isoelectric point at pH 8.05) showed higher rejections toward both divalent cationic (MgCl₂, 93.0%) and anionic (Na₂SO₄, 96.1%) salts with a water permeation flux of up to 81.0 L·m^-2·h^-1 at 6 bar, which surpassed currently reported membranes. More importantly, mainly owing to N-oxide zwitterion with strong hydration capability, ZPEI-TFC membranes displayed a high flux recovery ratio (97.0%) toward a model protein contaminant (bovine serum albumin), indicating good anti-fouling properties. Therefore, the novel N-oxide zwitterion functionalized positively charged nanofiltration membranes provide an alternative for water desalination and sewage reclamation.

Zwitterionic Biomaterials

The term "zwitterionic polymers" refers to polymers that bear a pair of oppositely charged groups in their repeating units. When these oppositely charged groups are equally distributed at the molecular level, the molecules exhibit an overall neutral charge with a strong hydration effect via ionic solvation. The strong hydration effect constitutes the foundation of a series of exceptional properties of zwitterionic materials, including resistance to protein adsorption, lubrication at interfaces, promotion of protein stabilities, antifreezing in solutions, etc. As a result, zwitterionic materials have drawn great attention in biomedical and engineering applications in recent years. In this review, we give a comprehensive and panoramic overview of zwitterionic materials, covering the fundamentals of hydration and nonfouling behaviors, different types of zwitterionic surfaces and polymers, and their biomedical applications.

Nanofiltration Membranes with Crumpled Polyamide Films: A Critical Review on Mechanisms, Performances, and Environmental Applications

Nanofiltration (NF) membranes have been widely applied in many important environmental applications, including water softening, surface/groundwater purification, wastewater treatment, and water reuse. In recent years, a new class of piperazine (PIP)-based NF membranes featuring a crumpled polyamide layer has received considerable attention because of their great potential for achieving dramatic improvements in membrane separation performance. Since the report of novel crumpled Turing structures that exhibited an order of magnitude enhancement in water permeance ( Science 2018, 360 (6388), 518-521), the number of published research papers on this emerging topic has grown exponentially to approximately 200. In this critical review, we provide a systematic framework to classify the crumpled NF morphologies. The fundamental mechanisms and fabrication methods involved in the formation of these crumpled morphologies are summarized. We then discuss the transport of water and solutes in crumpled NF membranes and how these transport phenomena could simultaneously improve membrane water permeance, selectivity, and antifouling performance. The environmental applications of these emerging NF membranes are highlighted, and future research opportunities/needs are identified. The fundamental insights in this review provide critical guidance on the further development of high-performance NF membranes tailored for a wide range of environmental applications.

Nano-Interlayers Fabricated via Interfacial Azo-Coupling Polymerization: Effect of Pore Properties of Interlayers on Overall Performance of Thin-Film Composite for Nanofiltration

The supporting layer of nanofiltration membranes is critical to the overall nanofiltration performance. However, conventional supports lack efficient surface porosity, which leads to the limited utilization rate of the polyamide (PA) layer. Herein a double-skin-layer nanofiltration membrane with porous organic polymer nanointerlayers prepared via a two-step interfacial polymerization technique is presented to investigate the effect of the interlayers' pore properties on the performance of the thin-film composite. Nanometer interlayers with different pore sizes are fabricated via interfacial azo-coupling polymerization. The pore properties of the nanointerlayer extremely influence the permeance, where a suitable pore size of 4.22 nm promotes pure water permeance of up to 32.2 L m^-2 h^-1 bar^-1, which is ∼3.8-fold greater than the membrane without an interlayer. However, an interlayer with 0.54 nm pores limits the performance (4.7 L m^-2 h^-1 bar^-1), which is even lower than the unmodified membrane (7.5 L m^-2 h^-1 bar^-1), because of the narrow pores and confined transport mode. However, the confined diffusion rate of amino monomers from the support to interface leads to a thinner PA layer of ∼45 nm and results in high flux. This work provides a facial route for the fabrication of interlayers and facilitate the design of high-performance membrane materials with interlayers.

Antifouling Fibrous Membrane Enables High Efficiency and High-Flux Microfiltration for Water Treatment

Membrane biofouling has long been a major obstacle to highly efficient water treatment. The modification of the membrane surface with hydrophilic materials can effectively enhance biofouling resistance. However, the water flux of the membranes is often compromised for the improvement of antifouling properties. In this work, a composite membrane composed of a zwitterionic hydrogel and electrospinning fibers was prepared by a spin-coating and UV cross-linking process. At the optimum conditions, the composite membrane could effectively resist the biofouling contaminations, as well as purify polluted water containing bacteria or diatoms with a high flux (1349.2 ± 85.5 L m^-2 h^-1 for 10⁶ CFU mL^-1 of an Escherichia coli solution). Moreover, compared with the commercial poly(ether sulfone) (PES) membrane, the membrane displayed an outstanding long-term filtration performance with a lower water flux decline. Therefore, findings in this work provide an effective antifouling modification strategy for microfiltration membranes and hold great potential for developing antifouling membranes for water treatment.

Zwitterionic Copolymer-Regulated Interfacial Polymerization for Highly Permselective Nanofiltration Membrane

A highly permselective nanofiltration membrane was engineered via zwitterionic copolymer assembly regulated interfacial polymerization (IP). The copolymer was molecularly synthesized using single-step free-radical polymerization between 2-methacryloyloxyethyl phosphorylcholine (MPC) and 2-aminoethyl methacrylate hydrochloride (AEMA) (P[MPC-co-AEMA]). The dynamic network of P[MPC-co-AEMA] served as a regulator to precisely control the kinetics of the reaction by decelerating the transport of piperazine toward the water/hexane interface, forming a polyamide (PA) membrane with ultralow thickness of 70 nm, compared to that of the pristine PA (230 nm). Concomitantly, manipulating the phosphate moieties of P[MPC-co-AEMA] integrated into the PA matrix enabled the formation of ridge-shaped nanofilms with loose internal architecture exhibiting enhanced inner-pore interconnectivity. The resultant P[MPC-co-AEMA]-incorporated PA membrane exhibited a high water permeance of 15.7 L·m^-2·h^-1·bar^-1 (more than 3-fold higher than that of the pristine PA [4.4 L·m^-2·h^-1·bar^-1]), high divalent salt rejection of 98.3%, and competitive mono-/divalent ion selectivity of 52.9 among the state-of-the-art desalination membranes.

Alginate Hydrogel Assisted Controllable Interfacial Polymerization for High-Performance Nanofiltration Membranes

The deepening crisis of freshwater resources has been driving the further development of new types of membrane-based desalination technologies represented by nanofiltration membranes. Solving the existing trade-off limitation on enhancing the water permeance and the rejection of salts is currently one of the most concerned research interests. Here, a facile and scalable approach is proposed to tune the interfacial polymerization by constructing a calcium alginate hydrogel layer on the porous substrates. The evenly coated thin hydrogel layer can not only store amine monomers like the aqueous phase but also suppress the diffusion of amine monomers inside, as well as provide a flat and stable interface to implement the interfacial polymerization. The resultant polyamide nanofilms have a relatively smooth morphology, negatively charged surface, and reduced thickness which facilitate a fast water permeation while maintaining rejection efficiency. As a result, the as-prepared composite membranes show improved water permeance (~30 Lm⁻²h⁻¹bar⁻¹) and comparable rejection of Na₂SO₄ (>97%) in practical applications. It is proved to be a feasible approach to manufacturing high-performance nanofiltration membranes with the assist of alginate hydrogel regulating interfacial polymerization.

Confined assembly of ultrathin nanoporous nitrogen-doped graphene nanofilms with dual metal coordination chemistry

Graphene oxide (GO) nanosheets with unique structure have received much attention in providing opportunity for high-performance membranes in separation. However, the rational design of ultrathin graphene membranes with controlled structures remains a big challenge. Here, we report a methodology to synthesize dual metal-coordinated ultrathin nanoporous graphene nanofilms by tailoring well-aligned nanocrystals as building blocks on heteroatom-doped GO nanosheets with tunable architectures. Manipulation of metal nitrate as bifunctional dopants realizes N-doping of graphene oxide and preferential growth of α-Mn₂O₃ nanocrystals. Generation of Mn-O-C bond during cross-linking greatly strengthens the stability of membranes for long-term steady operation. Meanwhile, because of spatial confinement effects and high binding energy, N-doped reduced GO nanosheets are desirable supports to construct numerous Mn-N-C bonds, thus generating artificial nanopores to significantly increase nanochannels for ultrafast mass transport. Moreover, the size-selective permeability of ultrathin nanoporous GO-based nanofilms can be optimized by managing the types of metal source for target coordination.

•

Dual metal-coordinated GO-based nanofilms are achieved by a general and facile method

•

Mn-N-C bonds are constructed in rGO nanosheets with N-containing coordinated links

•

Artificial nanopores are used to increase nanochannels for ultrafast mass transport

•

Generation of Mn-O-C bond greatly strengthens the stability of nanofilms in separation

Organic Nanobowls Modified Thin Film Composite Membrane for Enhanced Purification Performance toward Different Water Resources

The structure and composition of nanofillers have a significant influence on polyamide nanofiltration (NF) membranes. In this work, an asymmetric organic nanobowl containing a concave cavity was synthesized and incorporated into a polyamide layer to prepare thin film nanocomposite (TFN) membranes via an interfacial polymerization process. Benefiting from the hydrophilicity, hollow cavity and charge property of the compatible organic nanobowls, the separation performance of the developed TFN membrane was significantly improved. The corresponding water fluxes increased to 119.44 ± 5.56, 141.82 ± 3.24 and 130.27 ± 2.05 L/(m²·h) toward Na₂SO₄, MgCl₂ and NaCl solutions, respectively, with higher rejections, compared with the control thin film composite (TFC) and commercial (CM) membranes. Besides this, the modified TFN membrane presented a satisfying purification performance toward tap water, municipal effluent and heavy metal wastewater. More importantly, a better antifouling property of the TFN membrane than TFC and CM membranes was achieved with the assistance of organic nanobowls. These results indicate that the separation performance of the TFN membrane can be elevated by the incorporation of organic nanobowls.

Antifouling Nanofiltration Membrane Fabrication via Surface Assembling Light-Responsive and Regenerable Functional Layer

Membrane fouling, caused by aggregation of organics and microorganisms from filtrate on the membrane surface, seriously reduces the service life of a nanofiltration (NF) membrane. Developing facile and renewable antifouling modification methods without sacrificing separation properties of the membrane remain an imperative requirement. Herein, a thin-film composite (TFC) NF membrane with a light-responsive and regenerable functional layer (P-TFC) was fabricated via host-guest interactions between the azobenzene (guest) labeled functional polymers and the β-cyclodextrin (host) bonded membrane surface (H-TFC). The P-TFC-3 not only showed outstanding antifouling ability and high flux recovery ratio (FRR > 90% at the fourth antiadhesive test) but also exhibited enhanced water permeability (17.9 L m^-2 h^-1 bar^-1) and high selectivity (α_MgSO4^NaCl = 33.4 and fast antibiotics enrichment capacity) compared with the pristine membrane. Furthermore, when the functional layer was contaminated, it can be removed by ultraviolet light irradiation and a new functional layer can be rebuilt by adding fresh azobenzene labeled functional polymers. After several regeneration processes, the membranes still showed constant separation properties and high flux recovery ability (FRR > 90%). This work proposes an easy-to-assemble and regenerable surface modification strategy to endow TFC NF membranes with excellent fouling resistance and sustainable utilization ability while maintaining high separation properties.

Encapsulated Polyethyleneimine Enables Synchronous Nanostructure Construction and In Situ Functionalization of Nanofiltration Membranes

Highly permselective nanostructured membranes are desirable for the energy-efficient molecular sieving on the subnanometer scale. The nanostructure construction and charge functionalization of the membranes are generally carried out step by step through the conventional layer-by-layer coating strategy, which inevitably brings about a demanding contradiction between the permselective performance and process efficiency. For the first time, we report the concurrent construction of the well-defined molecular sieving architectures and tunable surface charges of nanofiltration membranes through precisely controlled release of the nanocapsule decorated polyethyleneimine and carbon dioxide. This novel strategy not only substantially shortens the fabrication process but also leads to impressive performance (permeance up to 37.4 L m^-2 h^-1 bar^-1 together with a rejection 98.7% for Janus Green B-511 Da) that outperforms most state-of-art nanofiltration membranes. This study unlocks new avenues to engineer next-generation molecular sieving materials simply, precisely, and cost efficiently.

Applications of tannic acid in membrane technologies: A review

Today, membrane technologies play a big role in chemical industry, especially in separation engineering. Tannic acid, one of the most famous polyphenols, has attracted widespread interest in membrane society. In the past several years, researches on the applications of tannic acid in membrane technologies have grown rapidly. However, there has been lack of a comprehensive review for now. Here, we summarize the recent developments in this field for the first time. We comb the history of tannic acid and introduce the properties of tannic acid firstly, and then we turn our focus onto the applications of membrane surface modification, interlayers and selective layers construction and mixed matrix membrane development. In those previous works, tannic acid has been demonstrated to be capable of making a great contribution to the membrane science and technology. Especially in membrane surface/interface engineering (such as the construction of superhydrophilic and antifouling surfaces and polymer/nanoparticle interfaces with high compatibility) and development of thin film composite membranes with high permselectivity (such as developing thin film composite membranes with ultrahigh flux and high rejection), tannic acid can play a positive and great role. Despite this, there are still many critical challenges lying ahead. We believe that more exciting progress will be made in addressing these challenges in the future.

Sharpening Nanofiltration: Strategies for Enhanced Membrane Selectivity

Nanofiltration plays an increasingly large role in many industrial applications, such as water treatment (e.g., desalination, water softening, and fluoride removal) and resource recovery (e.g., alkaline earth metals). Energy consumption and benefits of nanofiltration processes are directly determined by the selectivity of the nanofiltration membranes, which is largely governed by pore-size distribution and Donnan effects. During operation, the separation performance of unmodified nanofiltration membranes will also be impacted (deleteriously) upon unavoidable membrane fouling. Many efforts, therefore, have been directed toward enhancing the selectivity of nanofiltration membranes, which can be classified into membrane fabrication method improvement and process intensification. This review summarizes recent developments in the field and provides guidance for potential future approaches to improve the selectivity of nanofiltration membranes.

High-Performance Zwitterionic Nanofiltration Membranes Fabricated via Microwave-Assisted Grafting of Betaine

The thin-film composite (TFC) nanofiltration (NF) membrane is a very important method in solving the water crisis. However, the fabrication and industrialization of high-performance NF membranes still remains challenging. In this work, zwitterionic NF membranes via microwave-assisted grafting of betaine was first proposed. The resulting polyamide layer showed leaflike nanostructures after modification. Because of the enlarged permeation area and enhanced hydrophilicity derived from the unique leaflike structure, the optimal membrane permeability reached 40.8 L m^-1 h^-1 bar^-1. This water permeance was 2.2 times as high as the original polypiperazine-amide membrane, with a Na₂SO₄ rejection maintained at 97.0%. More importantly, the membrane demonstrated excellent selectivity to monovalent and divalent anions. This zwitterionic membrane fabricated by microwave-assisted grafting of betaine provides new insight for industrial scalable NF membranes with great potentials.

Structure-controlled zwitterionic nanocapsules with thermal-responsiveness

A facile approach is established to prepare zwitterionic nanocapsules (ZN C s) with controlled diameters and core/shell structures based on an inverse reversible addition-fragmentation transfer (RAFT) miniemulsion interfacial polymerization method. The diameters and core volume fractions of ZNCs can be tuned finely from 61 to 220 nm and from 0.22 to 0.61, respectively. Furthermore, the thermal-responsive property of the prepared zwitterionic nanocapsules was systematically studied relating to core/shell ratios and cross-linking degrees. These ZNCs could be particularly useful in constructing polymeric materials with well-defined nanoporous structures for nano-void membranes, drug delivery devices and catalytic carriers.

Polyamide nanofilms synthesized via controlled interfacial polymerization on a "jelly" surface

A thermal-sensitive "jelly" was used to control the diffusion of a diamine monomer for synthesizing polyamide free-standing nanofilms with an adjustable thickness of 5-35 nm. The reduced reaction rate of the interfacial polymerization at the hexane-"jelly" interface made the synthesized nanofilms show high water permeation flux and suitable salt rejection, and they also have highly negative surface charges and fairly smooth surfaces.

Precisely Patterned Nanostrand Surface of Cucurbituril[n]-Based Nanofiltration Membranes for Effective Alcohol-Water Condensation

Low concentration alcohols produced by state-of-the-art biological fermentation restrict subsequent purification processes for chemical, pharmaceutical, biofuel, and other applications. Herein, a rarely reported cucurbituril[n] (n = 6, 8) is employed to pattern the thin-film composite membranes with controllable and quantifiable nanostrand structures through a host-guest strategy. The resulting nanofiltration membrane with such morphology is the first report that exhibits excellent separation performance for isopropyl alcohol (IPA) and water, condensing the initial 0.5 wt % IPA aqueous solution to 9.0 wt %. This not only provides a novel strategy for patterning nanostructural morphology but also makes nanofiltration membranes promising for alcohol condensation in the biological fermentation industry that may reduce energy consumption and postprocessing costs.

Recent Developments in the Rational Fabrication of Thin Film Nanocomposite Membranes for Water Purification and Desalination

Efforts have been rendered by researchers to address water purification and desalination challenges through membrane separation processes. However, the trade-off phenomenon in permeability and selectivity constrained the membranes' usage. Recent advances made in fabricating membranes, especially thin film nanocomposite (TFN) membranes using functionalized nanofillers, have high performance in water purification and desalination. In this review, state-of-the-art thin film composite (TFC) membranes in water purification and desalination along with their drawbacks are discussed. The urgent demands as an alternative of TFC membranes are highlighted for high-performance membranes. Then, the fabrication and development of high permeability and selectivity of TFN membranes are discussed. Thin film nanocomposite membranes manufactured using rational nanofillers are systematically summarized. Finally, the applications of TFN membranes in water purification and desalination are reported.

Ultra-permeable polyamide membranes harvested by covalent organic framework nanofiber scaffolds: a two-in-one strategy

We demonstrated a two-in-one strategy for the fabrication of ultra-permeable polyamide layers featuring ultrathin thicknesses and increased water transport domains.

Polyamide-based thin-film composite nanofiltration membranes are widely used for potable water decontamination, brackish water desalination and wastewater reutilization. However, enhancing the water permeance of the polyamide layer within the thin-film composite nanofiltration membrane still remains a great challenge, because of the relatively large thickness and high transport resistance of the polyamide layer produced by intractable interfacial polymerization. Herein, we reported a two-in-one strategy to prepare ultra-permeable nanofiltration membranes via covalent organic framework (COF) nanofiber scaffold mediated interfacial polymerization. The highly porous and hydrophilic COF nanofiber scaffolds enhanced the controlled release of amine monomers, leading to ultrathin polyamide layers. Also, the relatively smooth COF nanofiber scaffolds can be spontaneously evolved into rugged and uneven architectures during interfacial polymerization, providing rough substrates for enlarging the actual areas of polyamide layers. Therefore, the increased areas of polyamide layers were employed as additional water permeable domains. Arising from the synergetic effect of the ultrathin and increased water permeation domains, the produced membranes exhibit exceptional nanofiltration performance with a water permeance of up to 31.1 L m^–2 h^–1 bar^–1 and a Na₂SO₄ rejection rate of about 95%, outperforming most other nanofiltration membranes. This highly accessible technique opens a new avenue for the design and engineering of ultra-permeable thin-film composite nanofiltration membranes, highlighting its great potential in providing clean water.