Temperature-Driven Transformation of CsPbBr3 Nanoplatelets into Mosaic Nanotiles in Solution through Self-Assembly

Concentration Dependent Modulation in Optoelectronic Traits of Self-Collated CsPbBr3 Perovskites

Self-collation of perovskite nanocrystals into superstructures of larger length scales has been growing in research interest due to their dramatically enhanced performance in various nano-devices, modulating their optical and electrical traits. Herein, the unique concentration-dependent self-assembly of phenethylamine (PEA)-capped CsPbBr3 (PCPB) perovskites spanning a size range of nano to micron level without structural phase alteration is infered. By optimizing various synthetic parameters like PEA amount, and solvents, the self-coalescence in PCPB crystal growth is controlled. Furthermore, the highest-concentrated PCPB (C5) has improved the charge transfer (CT) efficiency to 1,4-Napthoquinone (NPQ), corroborated with stronger binding between C5 and NPQ, compared to the lowest-concentrated PCPB (C1). Incorporating NPQ into such concentration-dependent PCPB enhances their local conductance unveiling the CT-induced current rise, while the detrimental insulating property of PEA molecules reduces the conductance in C5 compared to C1. These outcomes offer a foundation for tailoring the properties of self-assembled perovskites for optoelectronic devices and energy conversion technologies.

Pushing the Frontiers: Artificial Intelligence (AI)-Guided Programmable Concepts in Binary Self-Assembly of Colloidal Nanoparticles

Colloidal nanoparticle self-assembly is a key area in nanomaterials science, renowned for its ability to design metamaterials with tailored functionalities through a bottom-up approach. Over the past three decades, advancements in nanoparticle synthesis and assembly control methods have propelled the transition from single-component to binary assemblies. While binary assembly has been recognized as a significant concept in materials design, its potential for intelligent and customized assembly has often been overlooked. It is argued that the future trend in the assembly of binary nanocrystalline superlattices (BNLSs) can be analogous to the '0s' and '1s' in computer programming, and customizing their assembly through precise control of these basic units could significantly expand their application scope. This review briefly recaps the developmental trajectory of nanoparticle assembly, tracing its evolution from simple single-component assemblies to complex binary co-assemblies and the unique property changes they induce. Of particular significance, this review explores the future prospects of binary co-assembly, viewed through the lens of 'AI-guided programmable assembly'. Such an approach has the potential to shift the paradigm from passive assembly to active, intelligent design, leading to the creation of new materials with disruptive properties and functionalities and driving profound changes across multiple high-tech fields.

CsPbI3 Perovskite Nanorods: Enhancing Fluorescence Efficiency and Environmental Stability via Trioctylphosphine Ligand Coordination

Metal halide perovskite nanorods hold great promise for optoelectronic applications. However, they tend to undergo phase transitions due to the instability of the crystal phase under environmental conditions, leading to a rapid decline in the fluorescence efficiency. Here, we report a method in which trioctylphosphine (TOP) directly serves as both the surface ligand and solvent to synthesize highly stable α-CsPbI3 nanorods (NRs). This approach produces monodisperse α-phase NRs with controlled sizes (1 μm and 150 nm in length, and an aspect ratio of 10:1), as confirmed by high-resolution transmission electron microscopy (TEM) and X-ray diffraction. The optimized NRs exhibit a high photoluminescence quantum yield of around 80%, as well as excellent environmental stability; after 15 days of storage, the photoluminescence quantum yield (PLQY) retention is 90%. Transient absorption spectroscopy shows that the carrier lifetime is extended to 23.95 ns and 27.86 ns, attributed to the dual role of TOP in defect passivation and hydrolysis suppression. This work provides a scalable paradigm for stabilizing metastable perovskite nanostructures through rational ligand selection, paving the way for durable perovskite-based optoelectronics.

Thickness Control and Aggregation Inhibition Achieved by Ammonium Bromide-Modified Tetraphenylethylene for Stable CH3NH3PbBr3 Nanoplates

Deep blue-emitting perovskite nanoplates have become potential luminous materials. However, the photoluminescence emission and stability of the perovskite platelets are considerably dependent on the thickness and aggregation state. In this study, the ratio of the CH3NH3+ (MA+) cations and ammonium bromide-modified tetraphenylethylene (TPE) was tuned to effectually control the thickness and consequently the photoluminescence and aggregation state of the MAPbBr3 nanoplates. Specifically, the content of TPE in the precursor suspension was increased and the thickness of the produced nanoplatelets was reduced, bringing about the enhanced quantum size effect. Moreover, the TPE with a large steric resistance group stuck outward and restrained nanoplate aggregation in that dimension, inducing the formation of three-layer MAPbBr3-TPE nanoplates. The hydrogen bond and electrostatic interaction were formed between TPE and MAPbBr3, contributing to preventing phase segregation and facilitating an effective energy transfer. Furthermore, the stability of MAPbBr3-TPE was significantly strengthened by water exposure, light irradiation, and a moderate temperature. Optical anticounterfeiting labels were prepared through the different stimulus responses of the synthesized MAPbBr3-TPE in the external environment for encryption and decryption of information. This study lays a foundation for exploring the stability of perovskite nanoplates, anticounterfeiting, and other applications in advanced optical smart technologies.

Influence of Lewis basicity on the S2- induced synthesis of 0D Cs4PbBr6 hexagonal nanocrystals and its implications for optoelectronics

Perovskite nanocrystals (NCs) with their excellent optical and semiconductor properties have emerged as primary candidates for optoelectronic applications. While extensive research has been conducted on the 3D perovskite phase, the zero-dimensional (0D) form of this promising material in the NC format remains elusive. In this paper, a new synthesis strategy is proposed. According to the Hard-Soft Acid-Base (HSAB) principle, a novel class of hexagonal semiconductor nanocrystals (Cs4PbBr6 HNCs) derived from 0D perovskite Cs4PbBr6 is synthesized by doping an appropriate amount of PbS precursor solution into bromide. These Cs4PbBr6 HNCs are characterized and compared in detail to CsPbBr3 cubic nanocrystals (CsPbBr3 CNCs) as a reference. The Cs4PbBr6 HNCs exhibit significantly enhanced photoluminescence (PL) compared to CsPbBr3 CNCs, with an external quantum efficiency (EQE) reaching 24.19%. Furthermore, they demonstrate superior UV stability compared to CsPbBr3 CNCs. Comparative analysis of their physical properties and morphology, along with detailed investigations into band structures, density of states, and lifetime decay through DFT calculations, is provided. The practical application potential is validated by encapsulating them into backlight LEDs, covering 121.5% and 90.7% of the color gamut of NTSC and Rec. Our research provides comprehensive insights into the photophysical properties of inorganic halide perovskite nanomaterials and explores their potential in the field of optoelectronics.

Oleylammonium fluoride passivated blue-emitting 2D CsPbBr3 nanoplates with near-unity photoluminescence quantum yield: safeguarding against threats from external perturbations

Quantum-confined, two-dimensional (2D) CsPbBr3 (CPB) nanoplates (NPLs) have emerged as exceptional candidates for next-generation blue LEDs and display technology applications. However, their large surface-to-volume ratio and detrimental bromide vacancies adversely affect their photoluminescence quantum yield (PLQY). Additionally, external perturbations such as heat, light exposure, moisture, oxygen, and solvent polarity accelerate their transformation into three-dimensional (3D), green-emitting CPB nanocrystals (NCs), thereby resulting in the loss of their quantum confinement. Until now, no reported strategies have successfully addressed all these issues simultaneously. In this study, for the first time, we prepared oleylammonium fluoride (OAmF) salt and applied it post-synthetically to CPB NPLs with thicknesses of n = 3 and n = 4. Steady state and time-resolved photoluminescence (TRPL) measurements like fluorescence upconversion and TCSPC confirmed the elimination of detrimental deep trap states by fluoride ions, resulting in an unprecedented improvement in PLQY to 85% for n = 3 and 98% for n = 4. Furthermore, the formation of robust Pb-F bonds, coupled with strong electrostatic and hydrogen-bonding interactions, resulted in a highly stable NPL surface-ligand interaction. This concrete surface architecture restricts the undesired phase transition of 2D NPLs into 3D NCs under various external perturbations, including heat up to 363 K, strong UV irradiation, water, atmospheric conditions, and solvent polarity. Also, the temperature dependent TRPL measurements provide an insight into the charge carrier dynamics under thermal stress conditions and reveal the location of shallow trap states, which lie below 7 meV from the conduction band edge. In brief, our innovative OAmF salt has effectively addressed all the critical issues of 2D CPB NPLs, paving the way for next-generation LED applications. This breakthrough not only enhances the stability and PLQY of CPB NPLs but also offers a scalable solution for the advancement of perovskite-based technologies.

Reaction-controlled shape evolution and insights into the growth mechanism of CsPbBr3 nanocrystals

The correlation between structural transformation and optical characteristics of cesium lead bromide (CsPbBr3) nanocrystals (NCs) suggests insights into their growth mechanism and optical performance. Systematic control of reaction parameters led to the successful fabrication of on-demand shape-morphing CsPbBr3 NCs. Transmission electron microscopy observations showed that the shape transformation from nanocubes to microcrystals could be accelerated by increasing the precursor:ligand molar ratio and reaction time. Further evidence for orthorhombic CsPbBr3 NCs was obtained from their selected-area electron diffraction pattern, which exhibits a twin domain induced by the presence of large NCs. Likewise, we observed a substantial decrease in photoluminescence (PL) intensity of CsPbBr3 due to surface decomposition or surface ligand loss resulting from increased size. In addition, fusion of smaller particles having other dimensionality induced the increase in the PL full-width at half maximum. In particular, existence of larger bulk material caused a reduction in the peak intensity in the absorption spectra and a trend of decreasing tendency in intensity of the absorption bands related to bromoplumbate species provided direct evidence of fully converted Cs-oleate.

Ultrasmall CsPbBr3 Nanocrystals as a Recyclable Heterogeneous Photocatalyst in 100% E- and Anti-Markovnikov Sulfinylsulfonation of Terminal Alkynes

The precise synthesis of ultrasmall, monodisperse CsPbBr3 nanocrystals is crucial due to their enhanced photophysical properties resulting from strong quantum confinement effects. Traditional methods struggle with size control, complicating synthesis. Although CsPbBr3 nanocrystals find applications in LEDs and photovoltaics, their use in photocatalysis for organic reactions remains limited. Our study introduces ultrasmall TBIA-CsPbBr3 nanocrystals (∼5.6 nm), synthesized via a three-precursor hot injection method using tribromoisocyanuric acid (TBIA) as a bromine precursor for the first time. These nanocrystals exhibit a near-unity photoluminescence quantum yield (PLQY) of 0.99 and an elevated oxidation potential of +1.80 V. We demonstrate their efficacy as recyclable heterogeneous photocatalysts in a one-pot, 100% E-selective, anti-Markovnikov sulfinylsulfonation of terminal alkynes under visible light, achieving a high product conversion rate (PCR) of 62,500 μmol g-1 h-1 and recyclability for up to five cycles. Density functional theory (DFT) calculations support the exclusive formation of the E-isomer. TBIA-CsPbBr3 outperforms other CsPbBr3 perovskites in photocatalysis, with superior efficiency attributed to their extended excited-state lifetime and higher surface area, which accelerates the organic transformation process.

Light-induced transformation of all-inorganic mixed-halide perovskite nanoplatelets: ion migration and coalescence

When exposed to light, the colloidal perovskite nanoplatelets (NPLs) in the film can fuse into larger grains, and this phenomenon was thought to be closely related to ion migration. However, the available CsPbBr3 NPLs are not conducive to directly distinguishing this hypothesis. Herein, we prepare mixed-halide perovskite CsPbBr2.7I0.3 NPLs by a ligand-assisted reprecipitation method and investigate the photoluminescence evolution of NPLs under laser irradiation. At a low-irradiation intensity, 4.5-monolayer NPLs exhibit blue-shifted photoluminescence peaks due to the migration of iodide ions. Under higher laser fluence, a new photoluminescence component appears in the long wavelength region after the spectral blue shift, which is attributed to the coalescence of NPLs according to transmission electron microscopy analysis. A similar spectral evolution is also observed in 8-monolayer NPLs, while only the spectral blue shift caused by ion migration is detected in cuboidal CsPbBr2.7I0.3 nanocrystals. The use of strong bonding ligands can inhibit the fusion process of the NPLs, but not to impede ion migration, suggesting that fusion requires ligand detachment rather than ion migration. Similar suppression effects can be achieved in a vacuum atmosphere. Moreover, we demonstrate that mixed-halide NPLs can be used to realize anti-counterfeiting applications with superior photosensitivity.

Kinetically Controlled Synthesis of Quasi-Square CsPbI3 Nanoplatelets with Excellent Stability

Nanoplatelets (NPLs) share excellent luminescent properties with their symmetric quantum dots counterparts and entail special characters benefiting from the shape, like the thickness-dependent bandgap and anisotropic luminescence. However, perovskite NPLs, especially those based on iodide, suffer from poor spectral and phase stability. Here, stable CsPbI3 NPLs obtained by accelerating the crystallization process in ambient-condition synthesis are reported. By this kinetic control, the rectangular NPLs into quasi-square NPLs are tuned, where enlarged width endows the NPLs with a lower surface-area-to-volume ratio (S/V ratio), leading to lower surficial energy and thus improved endurance against NPL fusion (cause for spectral shift or phase transformation). The accelerated crystallization, denoting the fast nucleation and short period of growth in this report, is enabled by preparing a precursor with complete transformation of PbI2 into intermediates (PbI3 -), through an additional iodide supplier (e.g., zinc iodide). The excellent color stability of the materials remains in the light-emitting diodes under various bias stresses.

Enhanced Hygrothermal Stability of In-Situ-Grown MAPbBr3 Nanocrystals in Polymer with Suppressed Desorption of Ligands

Currently, the intrinsic instability of organic-inorganic hybrid perovskite nanocrystals (PNCs) at high temperature and high humidity still stands as a big barrier to hinder their potential applications in optoelectronic devices. Herein, we report the controllable in-situ-grown PNCs in polyvinylidene fluoride (PVDF) polymer with profoundly enhanced hygrothermal stability. It is found that the introduced tetradecylphosphonic acid (TDPA) ligand enables significantly improved binding to the surface of PNCs via a strong covalently coordinated P-O-Pb bond, as evidenced by density functional theory calculations and X-ray photoelectron spectroscopy analyses. Accordingly, such enhanced binding could not only make efficient passivation of the surface defects of PNCs but also enable the remarkably suppressed desorption of the ligand from the PNCs under high-temperature environments. Consequently, the photoluminescence quantum yield (PL QY) of the as-fabricated MAPbBr3-PNCs@PVDF film exhibits almost no decay after exposure to air at 333 K over 1800 h. Once the temperatures are increased from 293 to 353 K, their PL intensity can be kept as 88.6% of the initial value, much higher than that without the TDPA ligand (i.e., 42.4%). Moreover, their PL QY can be maintained above 50% over 1560 h (65 days) under harsh working conditions of 333 K and 90% humidity. As a proof of concept, the as-assembled white light-emitting diodes display a large color gamut of 125% National Television System Committee standard, suggesting their promising applications in backlight devices.

Real-Time In Situ Observation of CsPbBr3 Perovskite Nanoplatelets Transforming into Nanosheets

The manipulation of nano-objects through heating is an effective strategy for inducing structural modifications and therefore changing the optoelectronic properties of semiconducting materials. Despite its potential, the underlying mechanism of the structural transformations remains elusive, largely due to the challenges associated with their in situ observations. To address these issues, we synthesize temperature-sensitive CsPbBr₃ perovskite nanoplatelets and investigate their structural evolution at the nanoscale using in situ heating transmission electron microscopy. We observe the morphological changes that start from the self-assembly of the nanoplatelets into ribbons on a substrate. We identify several paths of merging nanoplates within ribbons that ultimately lead to the formation of nanosheets dispersed randomly on the substrate. These observations are supported by molecular dynamics simulations. We correlate the various paths for merging to the random orientation of the initial ribbons along with the ligand mobility (especially from the edges of the nanoplatelets). This leads to the preferential growth of individual nanosheets and the merging of neighboring ones. These processes enable the creation of structures with tunable emission, ranging from blue to green, all from a single material. Our real-time observations of the transformation of perovskite 2D nanocrystals reveal a route to achieve large-area nanosheets by controlling the initial orientation of the self-assembled objects with potential for large-scale applications.

Vertex-Oriented Cube-Connected Pattern in CsPbBr3 Perovskite Nanorods and Their Optical Properties: An Ensemble to Single-Particle Study

The design of cube-connected nanorods is accomplished by connecting seed nanocrystals of a defined shape in a particular orientation or by etching selective facets of preformed nanorods. In lead halide perovskite nanostructures, which retain mostly a hexahedron cube shape, such patterned nanorods can be designed with the anisotropic direction along the edge, vertex, or facet of seed cubes. Combining the Cs-sublattice platform for transforming metal halides to halide perovskites with facet-specific ligand binding chemistry, herein, vertex-oriented patterning of nanocubes in one-dimensional (1D) rod structures is reported. By tuning the length of host metal halides, their lengths could also be tuned from 100 nm to nearly 1000 nm. The symmetry of the hexagonal phase of host halide CsCdBr₃ and product orthorhombic CsPbBr₃ helped in maintaining the vertex [201] as the anisotropic direction. Neutral exciton recombination rates, extracted from photoluminescence blinking traces, showed a systematic increase from isolated cubes to cube-connected nanorods of various lengths. Efficient coupling of wave functions in vertex-oriented cube assemblies permits exciton delocalization. Our findings on carrier delocalization in cube-connected nanorods along their vertex direction having minimum interfacial contacts provide valuable insights into the fundamental chemistry of assembling anisotropic halide perovskite nanostructures as conducting wires.

Deciphering the Relevance of Quantum Confinement in the Optoelectronics of CsPbBr3 Perovskite Nanostructures

Perovskites (PVKs) have emerged as an exciting class of semiconducting materials owing to their magnificent photophysical properties and been used in solar cells, light-emitting diodes, photodetectors, etc. The growth of multidimensional nanostructures has revealed many exciting alterations in their optoelectronic properties compared to those of their bulk counterparts. In this work, we have spotlighted the influence of quantum confinement in CsPbBr₃ PVKs like the quantum dot (PQD), nanoplatelet (PNPL), and nanorod (PNR) on their charge transfer (CT) dynamics with 1,4-naphthoquinone (NPQ). The energy band alignment facilitates the transfer of both electrons and holes in the PNPL to NPQ, enhancing its CT rate, while only electron transfer in the PQD and PNR diminishes CT. The tunneling current across a metal-nanostructure-metal junction for the PNPL is observed to be higher than others. The higher exciton binding energy in the PNPL results in efficient charge transport by enhancing the mobility of the excited-state carrier and its lifetime compared to those of the PNR and PQD.

Deciphering the Role of Water in Promoting the Optoelectronic Performance of Surface-Engineered Lead Halide Perovskite Nanocrystals

Lead halide perovskites are promising candidates for high-performance light-emitting diodes (LEDs); however, their applicability is limited by their structural instability toward moisture. Although a deliberate addition of water to the precursor solution has recently been shown to improve the crystallinity and optical properties of perovskites, the corresponding thin films still do not exhibit a near-unity quantum yield. Herein, we report that the direct addition of a minute amount of water to post-treated formamidinium lead bromide (FAPbBr₃) nanocrystals (NCs) substantially enhances the stability while achieving a 95% photoluminescence quantum yield in a NC thin film. We unveil the mechanism of how moisture assists in the formation of an additional NH₄Br component. Alongside, we demonstrate the crucial role of moisture in assisting localized etching of the perovskite crystal, facilitating the partial incorporation of NH₄⁺, which is key for improved performance under ambient conditions. Finally, as a proof-of-concept, the application of post-treated and water-treated perovskites is tested in LEDs, with the latter exhibiting a superior performance, offering opportunities toward commercial application in moisture-stable optoelectronics.

Slower Auger Recombination in 12-Faceted Dodecahedron CsPbBr3 Nanocrystals

Over the past two decades, intensive research efforts have been devoted to suppressions of Auger recombination in metal-chalcogenide and perovskite nanocrystals (PNCs) for the application of photovoltaics and light emitting devices (LEDs). Here, we have explored dodecahedron cesium lead bromide perovskite nanocrystals (DNCs), which show slower Auger recombination time compared to hexahedron nanocrystals (HNCs). We investigate many-body interactions that are manifested under high excitation flux density in both NCs using ultrafast spectroscopic pump-probe measurements. We demonstrate that the Auger recombination rate due to multiexciton recombinations are lower in DNCs than in HNCs. At low and intermediate excitation density, the majority of carriers recombine through biexcitonic recombination. However, at high excitation density (>10¹⁸ cm^-3) a higher number of many-body Auger process dominates over biexcitonic recombination. Compared to HNCs, high PLQY and slower Auger recombinations in DNCs are likely to be significant for the fabrication of highly efficient perovskite-based photonics and LEDs.

Tailoring CsPbBr3 Growth via Non-Polar Solvent Choice and Heating Methods

This study describes an investigation of the role of non-polar solvents on the growth of cesium lead halide (CsPbX₃ X = Br and I) nanoplatelets. We employed two solvents, benzyl ether (BE) and 1-octadecene (ODE), as well as two nucleation and growth mechanisms, one-pot, facilitated by microwave irradiation (MWI)-based heating, and hot-injection, using convection. Using BE and MWI, large mesoscale CsPbBr₃ nanoplatelets were produced, whereas use of ODE produced small crystallites. Differences between the products were observed by optical spectroscopies, which showed first band edge absorptions consistent with thicknesses of ∼9 nm [∼15 monolayer (ML)] for the BE-CsPbBr₃ and ∼5 nm (∼9 ML) for ODE-CsPbBr₃. Both products had orthorhombic crystal structures, with the BE-CsPbBr₃ revealing significant preferred orientation diffraction signals consistent with the asymmetric and two-dimensional platelet morphology. The differences in the final morphology were also observed for products formed via hot injection, with BE-CsPbBr₃ showing thinner square platelets with thicknesses of ∼2 ML and ODE-CsPbBr₃ showing similar morphologies and small crystallite sizes. To understand the role solvent plays in crystal growth, we studied lead plumbate precursor (PbBr_n^2-n) formation in both solvents, as well as solvent plus ligand solutions. The findings suggest that BE dissolves PbBr₂ salts to a higher degree than ODE, and that this BE to precursor affinity persists during growth.

Nucleophile-Controlled Halide Release from the Substitution Reaction of Haloketone for Facet Tuning and Manganese Doping in CsPbCl3 Nanocrystals

Halide content of the reaction medium not only enhances the brightness of CsPbCl₃ nanocrystals but also, control the shape modulations as well as doping Mn(II) in these host nanocrystals. Correlating both the shape effect and doping, herein, an in situ reaction of nucleophile-controlled halide release was explored for monitoring facets modulations and doping in CsPbCl₃ nanocrystals. This was performed using alkyl amine as nucleophile which reacted with α-halo ketone, phenacyl chloride, to release chloride ions. Increase in amine concentration which released more Cl ions, reduced the possibility of shape transformation from perfect to truncated cubes during annealing. Similarly, for Mn(II) doping, the dopant photoluminescence intensity remained directly proportional to the amount of introduced amine nucleophiles. Quality of both doped and undoped nanocrystals obtained in this procedure remained unparallel and the method provided a strong correlation of rate of halide release with both facet modulations and doping in these nanocrystals.

Colloidal Metal-Halide Perovskite Nanoplatelets: Thickness-Controlled Synthesis, Properties, and Application in Light-Emitting Diodes

Colloidal metal-halide perovskite nanocrystals (MHP NCs) are gaining significant attention for a wide range of optoelectronics applications owing to their exciting properties, such as defect tolerance, near-unity photoluminescence quantum yield, and tunable emission across the entire visible wavelength range. Although the optical properties of MHP NCs are easily tunable through their halide composition, they suffer from light-induced halide phase segregation that limits their use in devices. However, MHPs can be synthesized in the form of colloidal nanoplatelets (NPls) with monolayer (ML)-level thickness control, exhibiting strong quantum confinement effects, and thus enabling tunable emission across the entire visible wavelength range by controlling the thickness of bromide or iodide-based lead-halide perovskite NPls. In addition, the NPls exhibit narrow emission peaks, have high exciton binding energies, and a higher fraction of radiative recombination compared to their bulk counterparts, making them ideal candidates for applications in light-emitting diodes (LEDs). This review discusses the state-of-the-art in colloidal MHP NPls: synthetic routes, thickness-controlled synthesis of both organic-inorganic hybrid and all-inorganic MHP NPls, their linear and nonlinear optical properties (including charge-carrier dynamics), and their performance in LEDs. Furthermore, the challenges associated with their thickness-controlled synthesis, environmental and thermal stability, and their application in making efficient LEDs are discussed.

Synthesis of Stable Lead-Free Cs3 Sb2 (Brx I1- x )9 (0 ≤ x ≤ 1) Perovskite Nanoplatelets and Their Application in CO2 Photocatalytic Reduction

Exploring photocatalysts to foster CO₂ photoreduction into high value-added chemicals is of great significance. Lead halide perovskites (LHPs) have recently been extensively investigated as photocatalysts, owing to their facile fabrication and prominent optoelectronic properties. However, the toxicity of lead and instability will hinder their future large-scale applications. To address these challenges, a series of lead-free Sb-based all-inorganic mixed halide perovskite Cs₃ Sb₂ (Br_x I_{1- x} )₉ (0 ≤ x ≤ 1) nanoplatelets (NPLs) is synthesized. The perovskite NPLs are prepared using a ligand-assisted re-precipitation approach at 50 °C. The authors observe the tunability of their optical band gaps from 2.1 to 2.5 eV, and they can maintain the excellent stability over 120 h under heating at 100 °C or UV light irradiation. The resultant materials are employed as efficient photocatalysts for visible-light driven CO₂ reduction at the gas-solid interface. The Cs₃ Sb₂ (Br_0.7 I_0.3 )₉ perovskite NPLs afford an impressive overall yield of 27.7 µmol g^-1 for the selective photocatalytic conversion of CO₂ into CO. This study represents a significant demonstration for practical artificial photosynthesis by using LHP materials as photocatalysts.

Laser-induced crystal growth observed in CsPbBr3 perovskite nanoplatelets

Benefiting from the easily adjustable optical properties of perovskite, CsPbBr3 nanocrystals (NCs) are considered to be able to show their advantages in the field of display. Here, we report that...

Thermal and photo stability of all inorganic lead halide perovskite nanocrystals

Inorganic lead halide perovskite (ILHP) nanocrystals (NCs) show great potential in solid state lighting and next generation display technology due to their excellent optical properties. However, almost all ILHP NCs are still facing the problem of unstable luminescence properties caused by heating and/or UV illumination. Further improving the thermal and photo stability of ILHP NCs has become the most urgent challenge for their practical application. This Perspective review specifically focuses on the thermal and photo stability of ILHP NCs, discusses and analyzes the factors that affect the thermal and photo stability of ILHP NCs from the perspective of surface ligands and structure composition, summarizes the current strategies to improve the thermal and photo stability of ILHP NCs, and presents the key challenges and perspectives on the research for the improvement of thermal and photo stability of ILHP NCs.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

Oriented Halide Perovskite Nanostructures and Thin Films for Optoelectronics

Oriented semiconductor nanostructures and thin films exhibit many advantageous properties, such as directional exciton transport, efficient charge transfer and separation, and optical anisotropy, and hence these nanostructures are highly promising for use in optoelectronics and photonics. The controlled growth of these structures can facilitate device integration to improve optoelectronic performance and benefit in-depth fundamental studies of the physical properties of these materials. Halide perovskites have emerged as a new family of promising and cost-effective semiconductor materials for next-generation high-power conversion efficiency photovoltaics and for versatile high-performance optoelectronics, such as light-emitting diodes, lasers, photodetectors, and high-energy radiation imaging and detectors. In this Review, we summarize the advances in the fabrication of halide perovskite nanostructures and thin films with controlled dimensionality and crystallographic orientation, along with their applications and performance characteristics in optoelectronics. We examine the growth methods, mechanisms, and fabrication strategies for several technologically relevant structures, including nanowires, nanoplates, nanostructure arrays, single-crystal thin films, and highly oriented thin films. We highlight and discuss the advantageous photophysical properties and remarkable performance characteristics of oriented nanostructures and thin films for optoelectronics. Finally, we survey the remaining challenges and provide a perspective regarding the opportunities for further progress in this field.

Introducing B-Site Cations by Ion Exchange and Shape Anisotropy in CsPbBr3 Perovskite Nanostructures

Lead halide perovskite nanocrystals, whether formed by their own nucleation and growth or by ion diffusion into the lattice of others, are still under investigation. Moreover, beyond isotropic nanocrystals, fabricating anisotropic perovskite nanocrystals by design has remained difficult. Exploring the lattice of orthorhombic-phase Cs₂ZnBr₄ with the complete replacement of Zn tetrahedra by Pb octahedra, dimension-tunable anisotropic nanocrystals of CsPbBr₃ are reported. This B-site ion introduction led to CsPbBr₃ nanorods having [100] as major axis, in contrast with all reports on rods/wires where the lengths were along the [001] direction. This was possible by using derivatives of α-bromo ketones, which helped in tuning the shape of Cs₂ZnBr₄ and also the facets of transformed CsPbBr₃. While similar experiments are extended to orthorhombic Cs₂HgBr₄, standard nanorods with [001] as the major axis were observed. From these results, it is further concluded that anisotropic perovskite nanocrystals might not follow any specific rules for directional growth and instead might depend on the structure of the parent lattice.

Morphology-Dependent Ambient-Condition Growth of Perovskite Nanocrystals for Enhanced Stability in Photoconversion Device

CsPbBr₃ perovskite nanocrystals with two different dimensionalities were synthesized at different temperatures and then integrated as optoelectronic transducers into transistor-type photoconversion devices. Postsynthesis transformation was observed for two-dimensional (2D) nanoplatelets, while the transformation was rarely found in 3D nanocubes. At ambient temperature and pressure, neighboring nanoplatelets made facet-to-facet contact and then fused into larger 2D nanoplatelets (2-5 times) without defects. The coalescence of 2D nanoplatelets at the ambient condition lowered the density of defects at the surface of the nanocrystals and thus could facilitate effective and stable photoconversion behavior in the nanocrystal film integrated into the device. Consequently, the ambient-condition aging of 2D nanoplatelets on device substrate led to 3 times higher retention in photoconversion performance. Importantly, these results provide a new concept of how perovskite nanocrystals can be integrated into a device for enhanced stability in device performance.

Alkylammonium Halides for Facet Reconstruction and Shape Modulation in Lead Halide Perovskite Nanocrystals

ConspectusThe interactions of halides and ammonium ions with lead halide perovskite nanocrystals have been extensively studied for improving their phase stability, controlling size, and enhancing their photoluminescence quantum yields. However, all these nanocrystals, which showed intense and color tunable emissions, mostly retained the six faceted cube or platelet shapes. Shape tuning needs the creation of new facets, and instead of composition variations by foreign ions interactions/substitutions, these require facet stabilizations with suitable ligands. Among most of the reported cases of lead halide perovskites, alkyl ammonium ions are used as a capping agent, which substituted in the surface Cs(I) sites of these nanocrystals. Hence, new surface ligands having a specific binding ability with different facets other than those in cube/platelet shapes are required for bringing stability to new facets and, hence, for tuning their shapes.In this Account, interactions of alkyl ammonium ions on the surface of perovskite nanocrystals and their impact on surface reconstructions are reviewed. Emphasizing the most widely studied CsPbBr₃ nanocrystals, the usefulness and impact of alkyl ammonium ions on the phase stability, high-temperature annealing, enhancement of the brightness and doping in these nanocrystals are first discussed. Then, nanocrystals formed under limited primary alkyl ammonium ions and also with specific tertiary ammonium ions having new facets are elaborated. Further, the treatment of excess alkyl ammonium halides to these newly formed multifaceted polyhedron nanocrystals under different conditions, which led to armed and step-armed structures, are discussed. The change in optical properties during these shape transformations is also presented. Finally, the shape-change mechanism with alkyl ammonium halide-induced dissolutions of {200} and {112} facets and formation of {110} and {002} facets are discussed. Further, in summary, future prospects of new ligand designing for stabilizing new facets of perovskite nanocrystals and obtaining new shapes and properties are proposed.

Synthesis of Lead-Free Cs2AgBiX6 (X = Cl, Br, I) Double Perovskite Nanoplatelets and Their Application in CO2 Photocatalytic Reduction

Morphology control represents an important strategy for the development of functional nanomaterials and has yet to be achieved in the case of promising lead-free double perovskite materials so far. In this work, high-quality Cs₂AgBiX₆ (X = Cl, Br, I) two-dimensional nanoplatelets were synthesized through a newly developed synthetic procedure. By analyzing the optical, morphological, and structural evolutions of the samples during synthesis, we elucidated that the growth mechanism of lead-free double perovskite nanoplatelets followed a lateral growth process from mono-octahedral-layer (half-unit-cell in thickness) cluster-based nanosheets to multilayer (three to four unit cells in thickness) nanoplatelets. Furthermore, we demonstrated that Cs₂AgBiBr₆ nanoplatelets possess a better performance in photocatalytic CO₂ reduction compared with their nanocube counterpart. Our work demonstrates the first example with two-dimensional morphology of this important class of lead-free perovskite materials, shedding light on the synthetic manipulation and the application integration of such promising materials.

The Surface Chemistry and Structure of Colloidal Lead Halide Perovskite Nanocrystals

ConspectusSince the initial discovery of colloidal lead halide perovskite nanocrystals, there has been significant interest placed on these semiconductors because of their remarkable optoelectronic properties, including very high photoluminescence quantum yields, narrow size- and composition-tunable emission over a wide color gamut, defect tolerance, and suppressed blinking. These material attributes have made them attractive components for next-generation solar cells, light emitting diodes, low-threshold lasers, single photon emitters, and X-ray scintillators. While a great deal of research has gone into the various applications of colloidal lead halide perovskite nanocrystals, comparatively little work has focused on the fundamental surface chemistry of these materials. While the surface chemistry of colloidal semiconductor nanocrystals is generally affected by their particle morphology, surface stoichiometry, and organic ligands that contribute to the first coordination sphere of their surface atoms, these attributes are markedly different in lead halide perovskite nanocrystals because of their ionicity.In this Account, emerging work on the surface chemistry of lead halide perovskite nanocrystals is highlighted, with a particular focus placed on the most-studied composition of CsPbBr₃. We begin with an in-depth exploration of the native surface chemistry of as-prepared, 0-D cuboidal CsPbBr₃ nanocrystals, including an atomistic description of their surface termini, vacancies, and ionic bonding with ligands. We then proceed to discuss various post-synthetic surface treatments that have been developed to increase the photoluminescence quantum yields and stability of CsPbBr₃ nanocrystals, including the use of tetraalkylammonium bromides, metal bromides, zwitterions, and phosphonic acids, and how these various ligands are known to bind to the nanocrystal surface. To underscore the effect of post-synthetic surface treatments on the application of these materials, we focus on lead halide perovskite nanocrystal-based light emitting diodes, and the positive effect of various surface treatments on external quantum efficiencies. We also discuss the current state-of-the-art in the surface chemistry of 1-D nanowires and 2-D nanoplatelets of CsPbBr₃, which are more quantum confined than the corresponding cuboidal nanocrystals but also generally possess a higher defect density because of their increased surface area-to-volume ratios.

Aging of Self-Assembled Lead Halide Perovskite Nanocrystal Superlattices: Effects on Photoluminescence and Energy Transfer

Excitonic coupling, electronic coupling, and cooperative interactions in self-assembled lead halide perovskite nanocrystals were reported to give rise to a red-shifted collective emission peak with accelerated dynamics. Here we report that similar spectroscopic features could appear as a result of the nanocrystal reactivity within the self-assembled superlattices. This is demonstrated by studying CsPbBr₃ nanocrystal superlattices over time with room-temperature and cryogenic micro-photoluminescence spectroscopy, X-ray diffraction, and electron microscopy. It is shown that a gradual contraction of the superlattices and subsequent coalescence of the nanocrystals occurs over several days of keeping such structures under vacuum. As a result, a narrow, low-energy emission peak is observed at 4 K with a concomitant shortening of the photoluminescence lifetime due to the energy transfer between nanocrystals. When exposed to air, self-assembled CsPbBr₃ nanocrystals develop bulk-like CsPbBr₃ particles on top of the superlattices. At 4 K, these particles produce a distribution of narrow, low-energy emission peaks with short lifetimes and excitation fluence-dependent, oscillatory decays. Overall, the aging of CsPbBr₃ nanocrystal assemblies dramatically alters their emission properties and that should not be overlooked when studying collective optoelectronic phenomena nor confused with superfluorescence effects.

Pressure-Driven Transformation of CsPbBrI2 Nanoparticles into Stable Nanosheets in Solution through Self-Assembly

Very recently, two-dimensional (2D) perovskite nanosheets (PNSs), taking the advantages of perovskite as well as the 2D structure properties, have received an enormous level of interest throughout the scientific community. In spite of this incredible success in perovskite nanocrystals (NCs), self-assembly of many nanostructures in metal halide perovskites has not yet been realized, and producing highly efficient red-emitting PNSs remains challenging. In this Letter, we show that by using CsPbBrI₂ perovskite nanoparticles (NPs) as a building block, PNSs can emerge spontaneously under high ambient pressure via template-free self-assembly without additional complicated operation. It is found that the formation of PNSs is ascribed to the high pressure that provides the driving force for the alignment of NPs in solution. Because of the disappearance of the grain boundaries between the adjacent NPs and increased crystallinity, these PNSs self-assembled from NPs exhibit enhanced properties compared to the initial NPs, including higher PL intensity and remarkable chemical stability toward light and water.

Growth mechanistic insights into perovskite nanocrystals: dimensional growth

The optical and electronic properties of lead halide perovskite nanocrystals have been explored extensively due to their increasing demand in photovoltaic and optoelectronic applications. But little is known about the growth kinetics of these nanocrystals. In this work, we demonstrate an interesting new mechanism using the method of arrested growth and precipitation to isolate the intermediates. We find that growth is driven by oriented attachment competing with the surface energetics. Hence, we observe a rare example of self-assembly driven dimensional growth characterized by suitable surface passivation that competes with the exposed surface facets through dimensional growth. This provides an explanation for not only the lack of size and shape tunability but also the emergence of a cubic shape rather than commonly observed spherical shapes in nanocrystals. Additionally, we find that this also corresponds to the observed phase transitions as well as correlating with pathways of decay of the photoluminescence spectra.

Structural Evolution of Layered Hybrid Lead Iodide Perovskites in Colloidal Dispersions

Controlling the structure of layered hybrid metal halide perovskites, such as the Ruddlesden-Popper (R-P) phases, is challenging because of their tendency to form mixtures of varying composition. Colloidal growth techniques, such as antisolvent precipitation, form dispersions with properties that match bulk layered R-P phases, but controlling the composition of these particles remains challenging. Here, we explore the microstructure of particles of R-P phases of methylammonium lead iodide prepared by antisolvent precipitation from ternary mixtures of alkylammonium cations, where one cation can form perovskite phases (CH₃NH₃⁺) and the other two promote layered structures as spacers (e.g., C₄H₉NH₃⁺ and C₁₂H₂₅NH₃⁺). We determine that alkylammonium spacers pack with constant methylene density in the R-P interlayer and exclude interlayer solvent in dispersed colloids, regardless of length or branching. Using this result, we illustrate how the competition between cations that act as spacers between layers, or as grain-terminating ligands, determines the colloidal microstructure of layered R-P crystallites in solution. Optical measurements reveal that quantum well dimensions can be tuned by engineering the ternary cation composition. Transmission synchrotron wide-angle X-ray scattering and small-angle neutron scattering reveal changes in the structure of colloids in solvent and after deposition into thin films. In particular, we find that spacers can alloy between R-P layers if they share common steric arrangements, but tend to segregate into polydisperse R-P phases if they do not mix. This study provides a framework to compare the microstructure of colloidal layered perovskites and suggests clear avenues to control phase and colloidal morphology.

Highly Thermotolerant Metal Halide Perovskite Solids

By virtue of their narrow emission bands, near-unity quantum yield, and low fabrication cost, metal halide perovskites hold great promise in numerous aspects of optoelectronic applications, including solid-state lighting, lasing, and displays. Despite such promise, the poor temperature tolerance and suboptimal quantum yield of the existing metal halide perovskites in their solid state have severely limited their practical applications. Here, a straightforward heterogeneous interfacial method to develop superior thermotolerant and highly emissive solid-state metal halide perovskites is reported and their use as long-lasting high-temperature and high-input-power durable solid-state light-emitting diodes is illustrated. It is found that the resultant materials can well maintain their superior quantum efficiency after heating at a temperature over 150 °C for up to 22 h. A white light-emitting diode (w-LED) constructed from the metal halide perovskite solid exhibits superior temperature sustainable lifetime over 1100 h. The w-LED also displays a highly durable high-power-driving capability, and its working current can go up to 300 mA. It is believed that such highly thermotolerant metal halide perovskites will unleash the possibility of a wide variety of high-power and high-temperature solid-state lighting, lasing, and display devices that have been limited by existing methods.

Stable Hexylphosphonate-Capped Blue-Emitting Quantum-Confined CsPbBr3 Nanoplatelets

Quantum-confined CsPbBr₃ nanoplatelets (NPLs) are extremely promising for use in low-cost blue light-emitting diodes, but their tendency to coalesce in both solution and film form, particularly under operating device conditions with injected charge-carriers, is hindering their adoption. We show that employing a short hexyl-phosphonate ligand (C₆H₁₅O₃P) in a heat-up colloidal approach for pure, blue-emitting quantum-confined CsPbBr₃ NPLs significantly suppresses these coalescence phenomena compared to particles capped with the typical oleyammonium ligands. The phosphonate-passivated NPL thin films exhibit photoluminescence quantum yields of ∼40% at 450 nm with exceptional ambient and thermal stability. The color purity is preserved even under continuous photoexcitation of carriers equivalent to LED current densities of ∼3.5 A/cm². ¹³C, ¹³³Cs, and ³¹P solid-state MAS NMR reveal the presence of phosphonate on the surface. Density functional theory calculations suggest that the enhanced stability is due to the stronger binding affinity of the phosphonate ligand compared to the ammonium ligand.

Laser-Assisted Fabrication for Metal Halide Perovskite-2D Nanoconjugates: Control on the Nanocrystal Density and Morphology

We report on a facile and rapid photo-induced process to conjugate graphene-based materials with metal-halide perovskite nanocrystals. We show that a small number of laser pulses is sufficient to decorate the 2-dimensional (2D) flakes with metal-halide nanocrystals without affecting their primary morphology. At the same time, the density of anchored nanocrystals could be finely tuned by the number of irradiation pulses. This facile and rapid room temperature method provides unique opportunities for the design and development of perovskite-2D nanoconjugates, exhibiting synergetic functionality by combining nanocrystals of different morphologies and chemical phases with various 2D materials.

Facets Directed Connecting Perovskite Nanocrystals

Connecting nanocrystals with removal of interface ligand barriers is one of the key steps for efficient carrier transportation in optoelectronic device fabrication. Typically, ion migration for crystal deformation or connection with other nanocrystals needs a solvent as medium. However, on the contrary, this has been observed for CsPbBr₃ perovskite nanocrystals in film where nanocrystals were swollen to get wider and fused with adjacent nanocrystals in self-assembly on film during solvent evaporation. Depending on precursor composition and exposed facets, again these connections could be programmed for tuning their connecting directions leading to different shapes. Aging further on solid substrate, these were also turned to continuous film of nanostructures eliminating all interparticle gaps on the film. This transformation could be ceased at any point of time, simply by heating or adding sufficient ligands. Analysis suggested that these unique and controlled connections were only observed with polyhedron shaped nanostructures with certain compositions and not with traditionally cubes. Details of this solid-surface transformation during solvent evaporation were analyzed, and an interparticle material transfer type mechanism was proposed. As these observations were not seen in chalcogenide and oxide nanocrystals and exclusively observed in perovskite nanocrystals, this would add new fundamentals to the insights of crystal growths of nanocrystals and would also help in obtaining films of connecting nanocrystals.