Interfacial Engineering of a Heteroatom-Doped Graphene Layer on Patterned Aluminum Foil for Ultrafast Lithium Storage Kinetics

Synergistic material modification-induced optimization of interfacial charge transfer and surface hydrogen adsorption

Being chemically stable, low cost and made from abundant resources, titanium dioxide (TiO2) possesses the most desired advantages for photocatalytic applications. However, the intrinsic limits of high surface hydrogen adsorption energy, wide band gap, low separation rate and rapid recombination of the photogenerated charge carriers greatly hamper its utilization. To address these issues, the present work combines density functional theory (DFT) calculations with rational modifications of TiO2 with nickel doping and an ultra-thin shield of fluorinated carbon (FNT) for application in the photocatalytic hydrogen evolution reaction (HER). Comprehensive studies imply that the synergistic modifications not only optimize the surface H adsorption, but also facilitate the interfacial charge transfer and simultaneously prevent the photochemical and chemical corrosion of the catalysts. In good agreement with the theoretical predictions, the resulting FNT photocatalysts demonstrate an optimal HER efficiency of 13.0 mmol g-1 h-1, nearly 33-times and over three-times beyond that of the pristine TiO2 (0.4 mmol g-1 h-1) and the Ni-doped TiO2 (4.2 mmol g-1 h-1), respectively. Moreover, the composite also exhibits excellent stability with a well-reproducible HER performance over a 66-hour cyclic HER test of 15 cycles.

Recent Advances in Carbon-Based Electrodes for Energy Storage and Conversion

Carbon-based nanomaterials, including graphene, fullerenes, and carbon nanotubes, are attracting significant attention as promising materials for next-generation energy storage and conversion applications. They possess unique physicochemical properties, such as structural stability and flexibility, high porosity, and tunable physicochemical features, which render them well suited in these hot research fields. Technological advances at atomic and electronic levels are crucial for developing more efficient and durable devices. This comprehensive review provides a state-of-the-art overview of these advanced carbon-based nanomaterials for various energy storage and conversion applications, focusing on supercapacitors, lithium as well as sodium-ion batteries, and hydrogen evolution reactions. Particular emphasis is placed on the strategies employed to enhance performance through nonmetallic elemental doping of N, B, S, and P in either individual doping or codoping, as well as structural modifications such as the creation of defect sites, edge functionalization, and inter-layer distance manipulation, aiming to provide the general guidelines for designing these devices by the above approaches to achieve optimal performance. Furthermore, this review delves into the challenges and future prospects for the advancement of carbon-based electrodes in energy storage and conversion.

On the Road to the Frontiers of Lithium-Ion Batteries: A Review and Outlook of Graphene Anodes

Graphene has long been recognized as a potential anode for next-generation lithium-ion batteries (LIBs). The past decade has witnessed the rapid advancement of graphene anodes, and considerable breakthroughs are achieved so far. In this review, the aim is to provide a research roadmap of graphene anodes toward practical LIBs. The Li storage mechanism of graphene is started with and then the approaches to improve its electrochemical performance are comprehensively summarized. First, morphologically engineered graphene anodes with porous, spheric, ribboned, defective and holey structures display improved capacity and rate performance owing to their highly accessible surface area, interconnected diffusion channels, and sufficient active sites. Surface-modified graphene anodes with less aggregation, fast electrons/ions transportation, and optimal solid electrolyte interphase are discussed, demonstrating the close connection between the surface structure and electrochemical activity of graphene. Second, graphene derivatives anodes prepared by heteroatom doping and covalent functionalization are outlined, which show great advantages in boosting the Li storage performances because of the additionally introduced defect/active sites for further Li accommodation. Furthermore, binder-free and free-standing graphene electrodes are presented, exhibiting great prospects for high-energy-density and flexible LIBs. Finally, the remaining challenges and future opportunities of practically available graphene anodes for advanced LIBs are highlighted.

Effects of Deep Cryogenic Treatment on the Microstructure and Properties of Rolled Cu Foil

The development of fifth-generation (5G) communication and wearable electronics generates higher requirements for the mechanical properties of copper foil. Higher mechanical properties and lower resistance are required for flexible copper-clad laminate and high-frequency and high-speed Cu foil. Deep cryogenic treatment (DCT), as a post-treatment method, has many advantages, such as low cost and ease of operation. However, less attention has been paid to the impact of DCT on rolled Cu foil. In this study, the effects of DCT on the microstructure and mechanical properties of rolled Cu foil were investigated. The results show that as the treatment time increased, the tensile strength and hardness first increased and then decreased, reaching a peak value of 394.06 MPa and 1.47 GPa at 12 h. The mechanical property improvement of rolled Cu foil was due to the grain refinement and the increase of dislocation density. The dislocation density of rolled Cu foil after a DCT time of 12 h was determined to have a peak value of 4.3798 × 10¹⁵ m^-2. The dislocation density increased by 19% and the grain size decreased by 12% after 12 h DCT.

Lightweight Through-Hole Copper Foil as a Current Collector for Lithium-Ion Batteries

In the past few decades, much effort has been dedicated to improve electrochemical performance of lithium-ion batteries (LIBs) through material design. Less attention, however, has been paid to structure engineering of battery components, which is an effective way for improving the electrochemical performance of LIBs. In this work, a lightweight Cu current collector with a through-hole array and columnar crystal on the surface (CC/THCu) was designed and fabricated using a nanosecond ultraviolet laser and electrodeposition processing to enhance specific capacity and cycle stability of LIBs. The synergistic effect of the columnar crystal and through-hole structure for improving electrochemical performances of LIBs assembled with the CC/THCu current collector was investigated. The results show that the complex structure provides spaces for volume expansion and reduces volume variation. When the hole fraction reaches 20%, the weight loss of CC/THCu is 28.41%. The corresponding LIB with the 20% hole fraction CC/THCu shows a high residual capacity rate of 81.2% and enhanced specific capacity (55.9% compared to the LIB with a bare Cu current collector). At a high rate of 1 C, the remaining specific capacity of the LIB with the CC/THCu current collector is better than that with the bare Cu current collector after 200 cycles. The CC/THCu current collector effectively improves the specific capacity and cycle stability of LIBs in contrast to the bare Cu current collector.

Enhanced power density of a supercapacitor by introducing 3D-interfacial graphene

The influence of 3D interfacial graphene on the capacitive performance of rGO-based supercapacitor has been studied, where the power density increase by 220%.