Comprehensive Study of the Growth Mechanism and Photoelectrochemical Activity of a BiVO4/Bi2S3 Nanowire Composite

Unlocking the Potential of Bi2S3-Derived Bi Nanoplates: Enhanced Catalytic Activity and Selectivity in Electrochemical and Photoelectrochemical CO2 Reduction to Formate

Various electrocatalysts are extensively examined for their ability to selectively produce desired products by electrochemical CO2 reduction reaction (CO2RR). However, an efficient CO2RR electrocatalyst doesn't ensure an effective co-catalyst on the semiconductor surface for photoelectrochemical CO2RR. Herein, Bi2S3 nanorods are synthesized and electrochemically reduced to Bi nanoplates that adhere to the substrates for application in the electrochemical and photoelectrochemical CO2RR. Compared with commercial-Bi, the Bi2S3-derived Bi (S-Bi) nanoplates on carbon paper exhibit superior electrocatalytic activity and selectivity for formate (HCOO-) in the electrochemical CO2RR, achieving a Faradaic efficiency exceeding 93%, with minimal H2 production over a wide potential range. This highly selective S-Bi catalyst is being employed on the Si photocathode to investigate the behavior of electrocatalysts during photoelectrochemical CO2RR. The strong adhesion of the S-Bi nanoplates to the Si nanowire substrate and their unique catalytic properties afford exceptional activity and selectivity for HCOO- under simulated solar irradiation. The selectivity observed in electrochemical CO2RR using the S-Bi catalyst correlates with that seen in the photoelectrochemical CO2RR system. Combined pulsed potential methods and theoretical analyses reveal stabilization of the OCHO* intermediate on the S-Bi catalyst under specific conditions, which is critical for developing efficient catalysts for CO2-to-HCOO- conversion.

Constructing Sequential Type II Heterojunction CQDs/Bi2S3/TiNbO Photoanode with Superior Charge Transfer Capability Toward Stable Photoelectrochemical Water Splitting

Efficient charge transfer and light-trapping units are pivotal prerequisites in the realm of Ti-based photoanode photoelectrochemical (PEC) water splitting. In this work, we successfully synthesized a ternary carbon quantum dots/Bi2S3 quantum dots/Nb-doped TiO2 nanotube arrays (CQDs/Bi2S3/TiNbO) composite photoanode for PEC water splitting. CQDs/Bi2S3/TiNbO composite photoanode exhibited a considerably elevated photocurrent density of 8.80 mA cm-2 at 1.23 V vs the reversible hydrogen electrode, which was 20.00 times better than that of TiO2 (0.44 mA cm-2). Furthermore, the CQDs/Bi2S3/TiNbO composite photoanode attested to exceptional stability, maintaining 92.54% of its initial current after 5 h of stability measurement. Nb-doping boosted the electrical conductivity, facilitating charge transfer at the solid-liquid interface. Moderate amounts of Bi2S3 quantum dots (QDs) and CQDs deposited on TiNbO provided abundant active sites for the electrolyte-photoanode interaction. Simultaneously, Bi2S3 QDs and CQDs synergistically functioned as light-trapping units to broaden the light absorption range from 396 to 530 nm, stimulating increased carrier generation within the composite photoanode. In comparison with pristine TiO, CQDs/Bi2S3/TiNbO photoanodes possessed a superior ability to promote interfacial reactions. This study may provide a strategy for developing high-performance Ti-based photoanodes with efficient charge transfer and light trapping units for highly driving solar-to-hydrogen conversion.

Epitaxial grown [hk1] oriented 2D/1D Bi2O2S/Sb2S3 heterostructure with significantly enhanced photoelectrochemical performance

Bismuth oxysulfide (Bi2O2S) is a layered material with high carrier mobility, excellent light absorption characteristic and good stability. However, there are few reports about the use of Bi2O2S in photoelectrochemical (PEC) water splitting. In this paper, Bi2O2S nanosheets (NSs) films were prepared on FTO substrates by one-step hydrothermal method, which broke the traditional powder state of Bi2O2S prepared. Based on the high lattice matching between antimony sulfide (Sb2S3) and bismuth sulfide (Bi2S3) obtained from the topological transformation of partial Bi2O2S, Sb2S3 nanorods (NRs) with [hk1] predominant orientation were epitaxially grown on the surface of Bi2O2S to establish a transport channel for rapid carrier migration. Titanium dioxide (TiO2) electron transport layer with oxygen vacancies was introduced into the back to capture and release electrons, further reducing the recombination rate. The photocurrent density of TiO2/Bi2O2S/Sb2S3-annealed photoelectrode at 1.23 V vs. RHE was 4.37 mA/cm2, which was 13.7 times that of monomer Bi2O2S. In addition, the TiO2/Bi2O2S/Sb2S3-annealed photoelectrode had lower charge transfer resistance and the IPCE value up to 48.22%. This study is of great significance for the application of Bi2O2S based photoelectrodes in the field of PEC water splitting.

Type-I heterojunction destruction by In situ formation of Bi2S3 for split-type photoelectrochemical aptasensor

Development of new strategies in photoelectrochemical (PEC) sensors is an important way to realize sensitive detection of biomolecule. In this study, mesoporous silica nanospheres (MSNs)-assisted split-type PEC aptasensor with in situ generation of Bi₂S₃ was proposed to achieve reliable detection of prostate-specific antigen (PSA). To be more specific, this bioresponsive release system will release large amounts of Na₂S by the reaction between PSA and aptamer that capped Na₂S-loading MSNs. Next, the Na₂S reacts with Bi to yield BiOI/BiOBr/Bi₂S₃ composite, which leads to an alteration in the electron-hole transfer pathway of the photoelectric material and a decrease in the response. As the PSA concentration increases, more Na₂S can be released and lower photocurrent is obtained. The linear range under the optimal experimental conditions is 10 pg·mL^-1-1 μg⋅mL^-1, and the detection limit is 1.23 pg⋅mL^-1, which has satisfactory stability and anti-interference.

Design of NiS@Ni3S2/CdS heterostructure with intimate contact interface for sensitive photoelectrochemical detection of lincomycin

Owing to their internal electric field effect and abundant photo-induced carriers, photoactive heterostructured materials are considered a feasible approach to improve the sensitivity of a photoelectrochemical (PEC) sensor. Herein, a novel NiS@Ni₃S₂/CdS heterostructure composite is derived from Ni-loaded zeolitic imidazolate framework (Ni-ZIF). The PEC experiments showed the NiS@Ni₃S₂/CdS composite exhibits superior photocurrent response than NiS@Ni₃S₂ and CdS. This is attributed to the fact that the type II heterojunction of NiS@Ni₃S₂/CdS with a tightly connected interface reduces the transport distance of carriers and facilitates electron-hole separation. Next, using the NiS@Ni₃S₂/CdS modified electrode, an aptamer/glutaraldehyde/chitosan/NiS@Ni₃S₂/CdS/ITO PEC biosensor is developed, which exhibits excellent sensitivity for lincomycin (Lin) detection with a wide linear range (0.0001 ∼ 1.25 nM) and a low detection limit of 0.067 pM. The prepared sensor is further employed to monitor Lin in the actual milk. The results confirm that the prepared sensing electrode displays good selectivity, repeatability and stability.

A photoelectrochemical sensor for Hg2+ detection with enhanced cathodic photocurrent via BiOI/Bi2S3 photoanode of self-sacrifice

Due to the inherent merits of the anodic photoelectrochemical (PEC) sensor, it was widely utilized in the field of analytical chemistry. However, it must be noted that the anodic PEC sensor was susceptible to interference in practical applications. The situation with the cathodic PEC sensor was exactly the opposite. Therefore, this work fabricated a PEC sensor combining photoanode and photocathode that solved the defects of conventional PEC sensors in detecting Hg²⁺. Specifically, Na₂S solution was carefully dropped on the BiOI-modified indium-tin oxide (ITO) to obtain ITO/BiOI/Bi₂S₃ directly by self-sacrifice method and the resulting electrode was used as photoanode. In addition, a sequential modification process was employed to decorate the ITO substrate with Au nanoparticles (Au NPs), Cu₂O, and L-cysteine (L-cys), thereby realizing the fabrication of the photocathode. Moreover, the presence of Au NPs further amplified the photocurrent of the PEC platform. During the detection process, when Hg²⁺ is present it will bind to the L-cys, resulting in an increase in current, thus enabling sensitive detection of Hg²⁺. The proposed PEC platform exhibited good stability and reproducibility, providing a new idea for the detection of other heavy metal ions.

Boosting photoelectrochemical activity of bismuth vanadate by implanting oxygen-vacancy-rich cobalt (oxy)hydroxide

Surface charge recombination is regarded as a detrimental factor that severely downgrades the photoelectrochemical (PEC) performance of bismuth vanadate (BiVO₄). In this work, we demonstrate defect-rich cobalt (oxy)hydroxides (Co(O)OH) as an excellent cocatalyst nanolayer sheathed on BiVO₄ to substantially improve the PEC water oxidation activity. The self-transformation of metal-organic framework produces an ultrathin Co(O)OH layer rich in oxygen vacancies, which could serve as a powerful hole extraction engine to promote the charge transfer/separation efficiency as well as an excellent oxygen evolution reaction catalyst to accelerate the surface water oxidation kinetics. As a result, the BiVO₄/Co(O)OH hybrid photoanode achieves remarkably inhibited surface charge recombination and presents a prominent photocurrent density of 4.2 mA cm^-2 at 1.23 V vs. RHE, which is around 2.6-fold higher than that of the pristine BiVO₄. Moreover, the Co(O)OH cocatalyst nanolayer significantly reduces the onset potential of BiVO₄ photoanodes by 200 mV. This work provides a versatile strategy for rationally preparing oxygen-vacancy-rich cocatalysts on various photoanodes toward high-efficient PEC water oxidation.

A Novel Artificial Neuron-Like Gas Sensor Constructed from CuS Quantum Dots/Bi2S3 Nanosheets

Real-time rapid detection of toxic gases at room temperature is particularly important for public health and environmental monitoring. Gas sensors based on conventional bulk materials often suffer from their poor surface-sensitive sites, leading to a very low gas adsorption ability. Moreover, the charge transportation efficiency is usually inhibited by the low defect density of surface-sensitive area than that in the interior. In this work, a gas sensing structure model based on CuS quantum dots/Bi₂S₃ nanosheets (CuS QDs/Bi₂S₃ NSs) inspired by artificial neuron network is constructed. Simulation analysis by density functional calculation revealed that CuS QDs and Bi₂S₃ NSs can be used as the main adsorption sites and charge transport pathways, respectively. Thus, the high-sensitivity sensing of NO₂ can be realized by designing the artificial neuron-like sensor. The experimental results showed that the CuS QDs with a size of about 8 nm are highly adsorbable, which can enhance the NO₂ sensitivity due to the rich sensitive sites and quantum size effect. The Bi₂S₃ NSs can be used as a charge transfer network channel to achieve efficient charge collection and transmission. The neuron-like sensor that simulates biological smell shows a significantly enhanced response value (3.4), excellent responsiveness (18 s) and recovery rate (338 s), low theoretical detection limit of 78 ppb, and excellent selectivity for NO₂. Furthermore, the developed wearable device can also realize the visual detection of NO₂ through real-time signal changes.

Selective Electrochemical Sensing Platform Based on the Synergy between Carbon Black and Single-Crystalline Bismuth Sulfide for Rapid Analysis of Antipyretic Drugs

Nanomaterials are of significant interest in acetaminophen (APAP) detection in pharmaceutical samples. Herein, a carbon black/single-crystalline rodlike bismuth sulfide (CB/Bi₂S₃) composite prepared by an ultrasonic method is reported and utilized for the rapid analysis of APAP. The highly oriented edge reactive sites of the CB/Bi₂S₃ composite promoted synergy and good electrochemical sensing performance with a fast electron transfer rate and low overpotential (0.35 V). Therefore, a CB/Bi₂S₃ composite-modified glassy carbon electrode (GCE) was applied to the selective determination of APAP by the voltammetric technique. The CB/Bi₂S₃ composite-modified electrode showed the lowest limit of detection of APAP (1.9 nM) with excellent sensitivity. The proposed CB/Bi₂S₃/GCE platform exhibited high selectivity, excellent stability (87.15%), and reproducibility. Also, the CB/Bi₂S₃/GCE sensor was then successfully used to analyze an APAP pharmaceutical sample and exhibited satisfactory outcomes. Therefore, the CB/Bi₂S₃-modified GCE sensor platform would be a low-cost and robust GCE electrode material for APAP detection.

A novel label-free photoelectrochemical aptasensor for the sensitive detection of ampicillin based on carbon-coated Bi2S3 nanorods

The prepared Bi2S3@C nanorods with remarkable photoelectrochemical properties served as a PEC sensor platform for the ultrasensitive analysis of ampicillin.

Functional facet isotype junction and semiconductor/r-GO minor Schottky barrier tailored In2S3@r-GO@(040/110)-BiVO4 ternary hybrid

Efficient interfacial exciton transfer and separation have been regarded as the foremost confront of semiconductor oriented photocatalysis. The simultaneous discovery of crystal facet isotype heterojunction across the (040)-reduction and (110)-oxidation facet of monoclinic scheelite BiVO₄ crystal; and Schottky junction at the interfacial region of BiVO₄ crystal with well-exposed functional (040) facet and r-GO sheets has been reflected as an efficient electron injection route. In this context lucrative architecture of a high productive all-solid-state Z-scheme charge transfer dynamics In₂S₃@r-GO@(040/110)-BiVO₄ isotype ternary hybrid photocatalyst was carried out and well-validated by FESEM and HRTEM analyses. Photoelectrochemical measurements have revealed that the accumulated photo-electrons over the exposed (040)-crystal facet of BiVO₄ truncated bipyramid easily cross the minor Schottky junction to expedite the unidirectional injection to the π-π conjugated two-dimensional planar r-GO structure. Besides, subsequent trapping of the injected electrons by the photoinduced holes of In₂S₃ leading to a superior charge carrier separation in the material, validated by PL, EIS, Mott-Schottky, and transient photocurrent analysis. Perceptibly, this intimate interfacial interacted crystal facet dependent electron shuttle provided a longer life span electrons and holes to settle in the conduction band of In₂S₃ and valence band of (110)-BiVO₄, respectively, for elevated photo-activity efficiency. The In₂S₃@r-GO@(040/110)-BiVO₄ ternary hybrid contributes 89.7% of Ciprofloxacin (CIP) detoxification in 150 min and 885.43 µmol of O₂ evolution in 120 min. More in, the constructive interrelations of resultant Physico-chemical, photoelectrochemical, and augmented photocatalytic redox efficiency were well-illustrated. This unique association semiconductor ternary hybrid photocatalyst via metal-free mediating agent crystal-facet sandwich structure will provide a scientific innovative basis for rational design and realization of advanced Z-scheme photocatalytic system for energy and environment application.