Synchronous Construction of Hierarchical Porosity and Thiol Functionalization in COFs for Selective Extraction of Cationic Dyes in Water Samples

Regulating the surface chemistry of covalent organic frameworks for enhancement cationic dye removal and identification

Simultaneous removal and identification of trace-level cationic dye pollutants from water is both important and challenging owing to their highly polar and complex sample matrices. In this study, three covalent organic frameworks (COFs) were synthesized using 2, 4, 6-triformylphloroglucinol with ethidium bromide (EB) containing positively charged groups, 3, 5-diaminobenzoic acid (DABA) containing negatively charged groups, and p-phenylenediamine (Pa) lacking charged groups. These were named EB-COFs, TpPa-1, and DP-COFs, respectively, and were employed as adsorbents for the extraction and identification of cationic dyes. The adsorption performance of the three COFs toward methylene blue (MB) and crystal violet (CV) was investigated. By incorporating carboxyl groups into DP-COFs, the surface chemistry of the adsorbent was effectively tailored, enabling complete exploitation of selective cationic sites. This facilitated dynamic interactions with cationic dyes through multiple adsorption mechanisms, including electrostatic, π-π, and H-bonding interactions. DP-COFs exhibited high adsorption capacities for MB and CV, achieving 383 and 326 mg g-1, respectively. The adsorption behavior was further analyzed using adsorption isothermals, kinetics, and thermodynamics. Moreover, DP-COFs were employed as a matrix in laser desorption/ionization time-of-flight mass spectrometry (LDI-TOF MS) to adsorb and directly identify both cationic dyes without the need for an elution process. This approach demonstrated high sensitivity, high reproducibility, low background interference, and excellent salt tolerance. The limits of detection for MB and CV were 0.12 and 0.04 ng mL-1, respectively, representing improvements of 166-fold and 225-fold compared with using DP-COFs solely as a matrix. Recovery rates of both dyes in spiked industrial wastewater and lake water samples ranged from 81.4 to111.1% with RSDs of 1.9-6.3%. These results highlight the high reliability of the proposed method.

Designing boron-doped carbon dot-functionalized COFs for fluorescence screening and liquid chromatography tandem mass spectrometry detection of toxins

In recent years, mushroom poisoning has been one of the most important factors of food poisoning in China, timely identification of the toxins contained in mushrooms is crucial for the treatment of patients. In this study, boric acid carbon dots (BA-CDs) can undergo specific boron affinity reactions with amatoxins toxins containing o-dihydroxyl groups by means of boric acid groups. Functional covalent organic framework (COF) and BA-CDs were combined to design a adsorbent with boric acid group (COF@VBC@BA-CDs) was designed to meet the requirements of both fluorescent and pretreated materials for amatoxins. The mushrooms and urine samples were rapid screening using fluorescence detection, and then, for positive samples, the target analytes on the COF@VBC@BA-CDs are collected and eluted for next liquid chromatography tandem mass spectrometry (LC-MS/MS) detection. According to the fluorescence characteristics of COF@VBC@BA-CDs, the fluorescence quenching intensity was linearly correlated with the concentration (2-200 μg/L) and the detection limit was 1.2 μg/L. Meanwhile, the detection limit of LC-MS/MS was 0.5 μg/kg for musroom and 0.2 μg/L for urine, as well as the recovery rate was 72.7-110.1%. This noval method meets the methodological requirements and can be used for actual sample analysis.

Covalent Organic Framework Controls the Aggregation of Metal Porphyrins for Enhanced Photocatalytic H2 Evolution

Although different post modifications of covalent organic frameworks (COFs) have been developed for achieving hierarchical nanostructures and improved photocatalytic performance, the co-assemblies of COFs with small organic molecules were still rarely studied. Herein, COF/porphyrin composites, which were fabricated at room temperature, reveal that COFs surface can modulate the aggregation of metal porphyrins, which subsequently enhance the photocatalytic properties of COFs assemblies. Thus, the surface of COFs was decorated by porphyrins aggregations with varied thickness, dependent on the metal ions of porphyrins. Ni(II) meso-Tetra (4-carboxyphenyl) porphine (NiTCPP) formed discontinuous monolayer covering on COFs surface, while Pt(II) meso-Tetra (4-carboxyphenyl) porphine (PtTCPP) or Co(II) meso-Tetra (4-carboxyphenyl) porphine (CoTCPP) aggregated into multilayer coverage. Notably, even though NiTCPP did not show any advantages in terms of light absorption or HOMO/LUMO energy levels, COF/NiTCPP with the lowest porphyrin loading still exhibited the highest photocatalytic H2 evolution (29.71 mmol g-1 h-1), which is 2.5 times higher than that of COF/PtTCPP or COF/CoTCPP. These results open new possibilities for making highly efficient photocatalysts upon the co-assemblies of COFs with small organic molecules.

A sustainable, eco-friendly Tb/Eu-modified HOFs for ultrasensitive detection and efficient adsorption of carcinogens in complex water environments

Developing a multifunctional material that can detect and remove carcinogens in water environments, simultaneously monitor their toxic metabolites in living organisms is significant for environmental remediation and human health. However, most research only focused on detection or adsorption carcinogens due to the difficulty of integrating multiple functions into one material, let alone monitoring their toxic metabolites. Here, a multifunctional Tb/Eu@TATB-HOF (1) is first developed to monitor two carcinogens, malachite green (MG) and its metabolites leucomalachite green (LMG), and simultaneously remove MG from the contaminated water. 1, as the dual-emission fluorescence sensor, can achieve ultrasensitive and highly visualized sensing for MG and LMG with different response modes. Even in actual samples, 1 still exhibits satisfactory sensing performances. As the adsorbent, 1 displays good recyclability and high adsorption capacity for MG. The sensing and adsorption mechanisms are explored through experiments and theoretical calculations. This work not only provides a novel insight for environmental remediation and human health through detection and removal of carcinogens, simultaneously monitoring their toxic metabolites, but first reveals the enormous potential of HOFs as multifunctional materials simultaneously for fluorescence sensing and adsorption.

Magnetically nanorized seaweed residue for the adsorption of methylene blue in aqueous solutions

The cost-effective and green separation of dye pollutants from wastewater is of great importance in environmental remediation. Industrial seaweed residue (SR), as a low-cost cellulose source, was used to produce carboxylated nanorized-SR (NSR) via oxalic acid (OA)-water pretreatments followed by ultrasonic disintegration. Fourier transform infrared spectroscopy, X-ray polycrystalline diffraction, nitrogen isotherms, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, X-ray photoelectron spectrometry, particle charge detection, zeta potential and retro titration experiments were utilized to explore the physiochemical properties of samples. The NSRs with carboxyl content of 4.58-6.73 mmol g-1 were prepared using 10-60% OA-water pretreatment. In the case of 20% OA-water pretreatment, the highest NSR yield (73.9%) and nanocellulose content (80.2%) were obtained. Through self-assembly induced by the electrostatic interaction, magnetic NSR composite adsorbents (MNSRs) were prepared with the combination of NSR and Fe3O4 nanoparticles (NPs). The carboxylated NSR with negative charge demonstrated good affinity for Fe3O4 NPs. The Fe3O4 NPs were perfectly microencapsulated with the NSR when the NSR/Fe3O4 mass ratio was higher than 1/1. The adsorption properties of the MNSR for methylene blue (MB) removal from aqueous solution were investigated. The adsorbent with NSR/Fe3O4 mass ratio of 1/1 (MNSR1/1) exhibited optimum performance in terms of the magnetic properties and adsorption capacity. The MNSR1/1 showed high adsorption ability in a pH ≥7 environment. According to the Langmuir fitting, the maximum adsorption capacity of MNSR1/1 for MB reached 184.25 mg g-1. The adsorption of MB complies with the pseudo-second-order kinetic model. MNSR1/1 still maintained good adsorption properties after the fifth cycle of adsorption-desorption. MNSR1/1 could selectively adsorb cationic dye (i.e., MB and methyl violet) from wastewater, with hydrogen bonding and electrostatic interaction as the main force.

Facile synthesis of amino-modified magnetic covalent organic framework for the efficient extraction and determination of anionic azo dyes in carbonated beverages

In this work, a novel magnetic covalent organic framework (COF (TpPa-NH2) @ Fe3O4) was prepared via two step by simple solvent method for the extraction of anionic azo dye residues in food. The as-prepared COF (TpPa-NH2) @ Fe3O4 nanocomposite was characterised by scanning electron microscope, transmission electron microscope, Fourier transform-infrared spectroscopy, X-ray diffraction and vibrating sample magnetometer. Before high-performance liquid chromatography with ultraviolet detection (HPLC-UV) determination, it was used as magnetic adsorbent for magnetic solid-phase extraction (MSPE) to extract and pre-concentrate three anionic azo dyes in carbonated beverage samples. The several key extraction and desorption parameters affecting the extraction recovery rate were investigated, including extraction time, pH of the solution, amount of material, adsorption time, elution solvent, pH of elution solvent, type of elution solvent, elution volume and elution time. Under optimised conditions, this method has good linearity between 5 and 500 μg L-1 (correlation coefficient > 0.9986). The limit of detection was 2.3-3.4 μg L-1. The recoveries of the samples were between 87.5 and 96.9%, and the relative standard deviation lower than 4.6%. The developed method has broad application prospects for the analysis of anionic azo dyes in carbonated beverages.

Carboxyl-functionalized covalent organic frameworks for the extraction of malachite green and crystal violet in environmental water samples prior to quantification by high-performance liquid chromatography

In this study, monodisperse, uniform, and spherical covalent organic frameworks (COFs) were synthesized using 1,3,5-tris (4-aminophenyl) benzene and 1,3,5-tricarboxaldehyde benzene at room temperature. Post-modification of 6-aminocaproic acid on the COFs yielded carboxyl-modified COFs (COFs-COOH). The modification enhanced the hydrophilicity and adsorption efficiencies of COFs-COOH for malachite green (MG) and crystal violet (CV). A COFs-COOH-based dispersive solid-phase extraction coupled with high-performance liquid chromatography was developed for the analysis of MG and CV. The method showed a linear range from 10 to 1000 ng/mL with detection limits of 1.82 and 0.70 ng/mL for MG and CV detection, respectively. The recoveries of MG and CV from water samples collected from fish farms and markets ranged from 91.63% to 107.10% with relative standard deviations below 5%. Reproducibility tests demonstrated that the adsorption efficiencies of COFs-COOH were maintained at above 85.86% over 15 cycles. The study verified the potential of COFs-COOH as sorbents for the enrichment and separation of triphenylmethane dyes from complex samples.

Rapid, simple, and simultaneous electrochemical determination of cadmium, copper, and lead in Baijiu using a novel covalent organic framework based nanocomposite

It is of great significance to develop a simple and rapid electrochemical sensor for simultaneous determination of heavy metal ions (HMIs) in Baijiu by using new nanomaterials. Here, graphene (GR) was utilized to combine with covalent organic frameworks (COFs) that was synthesized via the aldehyde-amine condensation between 2, 5-dimethoxyterephthalaldehyde (DMTP) and 1, 3, 5-tris(4-aminophenyl) benzene (TAPB) to prepare a new GR/COFDPTB/GCE sensor for electrochemical sensing multiple HMIs. Compared with the glass carbon electrode (GCE), GR/GCE and COFDPTB/GCE, the developed sensor exhibited excellent electrochemical analysis ability for the simultaneous detection of Cd2+, Pb2+, and Cu2+ owing to the synergistically increased the specific surface area, the periodic porous network and plenty of effective binding sites, as well as the enhanced conductivity. Under the optimized experimental parameters, the proposed sensor showed good linearity range of 0.1-25 μM for Cd2+, and both 0.1-11 μM for Pb2+ and Cu2+ with the detection limits of Cd2+, Pb2+, and Cu2+ being 0.011 μM, 8.747 nM, and 6.373 nM, respectively. Besides, the designed sensor was successfully applied to the simultaneous detection of the three HMIs in Baijiu samples, suggesting its good practical application performance and a new method for the rapid detection of HMIs being expended.

Hierarchically Porous Covalent Organic Frameworks: Synthesis Methods and Applications

Covalent organic frameworks (COFs) with high porosity have garnered considerable interest for various applications owing to their robust and customizable structure. However, conventional COFs are hindered by their narrow pore size, which poses limitations for applications such as heterogeneous catalysis and guest delivery that typically involve large molecules. The development of hierarchically porous COF (HP-COF), featuring a multi-scale aperture distribution, offers a promising solution by significantly enhancing the diffusion capacity and mass transfer for larger molecules. This review focuses on the recent advances in the synthesis strategies of HP-COF materials, including topological structure design, in-situ templating, monolithic COF synthesis, defect engineering, and crystalline self-transformation. The specific operational principles and affecting factors in the synthesis process are summarized and discussed, along with the applications of HP-COFs in heterogeneous catalysis, toxic component treatment, optoelectronics, and the biomedical field. Overall, this review builds a bridge to understand HP-COFs and provides guidance for further development of them on synthesis strategies and applications.

Facile synthesis of S, N-co-doped carbon dots for bio-imaging, Fe3+ detection and DFT calculation

Turning waste into wealth, herein, two highly fluorescent N and S co-doped carbon dots (N, S-CDs-A and N, S-CDs-B) were synthesized by the hydrothermal reaction of contaminant reactive red 2 (RR2) and L-cysteine or L-methionine, respectively. The detailed morphology and structure of N, S-CDs were characterized by XRD, Raman spectrum, FTIR spectra, TEM, HRTEM, AFM and XPS. The maximum fluorescent of N, S-CDs-A and N, S-CDs-B are 565 and 615 nm under different excitation wavelengths with moderate fluorescence intensity of 14.0 % and 6.3 %, respectively. The microstructure models of N, S-CDs-A and N, S-CDs-B, which were induced by FT-IR, XPS and element analysis, had been applied in DFT calculation. The result indicated that the doping of S and N is beneficial to obtain the red-shift of fluorescent spectra. Both N, S-CDs-A and N, S-CDs-B showed highly sensitive and selective to Fe3+. N, S-CDs-A can also detect Al3+ ion with high sensitivity and selectivity. Finally, N, S-CDs-B was successfully applied in cell imaging.

How to apply terpenoid-based deep eutectic solvents for removal of antibiotics and dyes from water: Theoretical prediction, experimental validation and quantum chemical evaluation

This study proposed a theoretical prediction method and mechanism investigation for the extraction of antibiotics and dyes from aqueous media using terpenoid-based deep eutectic solvents (DESs). Firstly, Conductor-like Screening Model for Real Solvents (COSMO-RS) approach was applied to predict selectivity, capacity and performance index in the extraction of 15 target compounds including antibiotics (tetracyclines, sulfonamides, quinolones, β-lactams) and dyes by 26 terpenoid-based DESs, and thymol-benzyl alcohol shows promising theoretical selectivity and extraction efficiency for the target compounds. Moreover, the structures of both hydrogen bond acceptors (HBA) and hydrogen bond donors (HBD) have an impact on the predicted extraction performance, which can be improved by tailoring those candidates with higher polarity, smaller molecular volume, shorter alkyl chain length and the presence of aromatic ring structures, etc. According to the predicted molecular interactions revealed by σ-profile and σ-potential, the DESs with HBD ability can promote the separation process. Furthermore, reliability of proposed prediction method was confirmed by experimental verification, indicating that the trends of theoretical extraction performance index were similar with the experimental results by using actual samples. At last, the extraction mechanism was evaluated by quantum chemical calculations based on visual presentations, thermodynamic calculations and topological properties; and the target compounds showed favorable energies of solvation to transfer from aqueous phase to DESs phase. The proposed method has been proved with potential to provide the efficient strategies and guidance for more applications (e.g., microextraction, solid phase extraction, adsorption) with similar molecular interactions of green solvents in environmental research.

A novel cationic covalent organic framework as adsorbent for simultaneous removal of methyl orange and hexavalent chromium

The simultaneous removal of toxic, carcinogenic organic dyes and metal ions from water by one material offers significant advantages when fast, facile, and robust water purification is required. Ionic covalent organic frameworks (ICOFs) have the combined properties of COFs and ion exchange resins and are expected to achieve simultaneous capture of heavy metal ions and organic dyes from water. Herein, a novel guanidinium-based ICOF was synthesized using a solvothermal method. Benefitting from the cationic character, porosity and nanoscale pore size of ICOFs, the adsorbent exhibited high simultaneous adsorption capacities of 290 mg g-1 and 158 mg g-1 for methyl orange (MO) and Cr(vi), respectively, and retained more than 90% adsorption capacity after six adsorption-desorption cycles. In addition, based on dual control of size-exclusion and charge-selection, precisely selective adsorption is achieved towards diverse mixed anionic and cationic pollutants. This strategy offers a practical solution for COFs to confront environmental pollution issues.

[Recent application advances of covalent organic frameworks for solid-phase extraction]

Covalent organic frameworks (COFs) are a type of crystalline porous polymers. It firstly prepared by thermodynamically controlled reversible polymerization to obtain chain units and connecting small organic molecular building units with a certain symmetry. These polymers are widely used in gas adsorption, catalysis, sensing, drug delivery, and many other fields. Solid-phase extraction (SPE) is a fast and simple sample pretreatment technology that can enrich analytes and improve the accuracy and sensitivity of analysis and detection; it is extensively employed in food safety detection, environmental pollutant analysis, and several other fields. How to improve the sensitivity, selectivity, and detection limit of the method during sample pretreatment have become a topic of great interest. COFs have recently been applied to sample pretreatment owing to their low skeleton density, large specific surface area, high porosity, good stability, facile design and modification, simple synthesis, and high selectivity. At present, COFs have also attracted extensive attention as new extraction materials in the field of SPE. These materials have been applied to the extraction and enrichment of diverse types of pollutants in food, environmental, and biological samples, such as heavy metal ions, polycyclic aromatic hydrocarbons, phenol, chlorophenol, chlorobenzene, polybrominated diphenyl ethers, estrogen, drug residues, pesticide residues, etc. COFs can be synthesized from different materials and exert different effects on different extracts. New types of COFs can also be synthesized via modification to achieve better extraction effects. In this work, the main types and synthesis methods of COFs are introduced, and the most important applications of COFs in the fields of food, environment and biology in recent years are highlighted. The development prospects of COFs in the field of SPE are also discussed.

Ultrasonic assisted magnetic solid phase extraction of ultra-trace mercury with ionic liquid functionalized materials

Due to the agglomeration between particles, the inherent adsorption characteristics of magnetic powder materials are usually difficult to fully display. Taking ionic liquid functional materials as an example, the enrichment behavior of these adsorbents for trace mercury (Hg²⁺) in ultrasonic (US) assisted dispersion mode was systematically studied. The dissociation of protonic ionic liquids (IL) occur in the process of dispersion and the strong electrostatic attraction can improve the diffusion and adhesion of mercury on the adsorbent surface. Spectral measurement data showed that with the help of US, the more uniform dispersion of magnetic materials accelerated the adsorption of trace Hg²⁺. Ultrasonic intrinsic parameters such as frequency, power and radiation duration significantly affect the dispersion and apparent adsorption properties of magnetic functional materials. In the range of experimental parameters, the dye/paper image experimental results documents that there is a positive correlation between cavitation effect and ultrasonic frequency/power. The enrichment degree of fixed adsorbate (0.1 μg L^-1) under high frequency (59 kHz) or high-power input (100%) is 1-2 times higher than that under low frequency (40 kHz) or low power (60%) input. This is a valuable conclusion for the subsequent study of US dispersion of magnetic and even non-magnetic powder materials. In addition, the in-situ desorption and accurate measurement of adsorbed mercury were realized by combining slurry vapor generation atomic fluorescence spectroscopy (SVG-AFS). The constructed US assisted magnetic solid phase extraction (US-MSPE) method has the characteristics of low detection limit (0.36 ng L^-1), high recovery (>90%), sustainable utilization (>3) and reasonable measurement deviation (<5%), which can meet the requirements of ultra-trace Hg²⁺ (0.01-1.0 μg L^-1).

In Situ Rapid Electrochemical Fabrication of Porphyrin-Based Covalent Organic Frameworks: Novel Fibers for Electro-Enhanced Solid-Phase Microextraction

Electro-enhanced solid-phase microextraction (EE-SPME) is a bright separation and enrichment technique that integrates solid-phase microextraction with the electric field. It retains the excellent extraction performance of SPME technology while having the advantages of efficient driving of electric field and special interaction between the electric field and electrons in the molecules of material structure. Replacing conventional SPME fibers with highly efficient and highly conductive original EE-SPME fibers is critical for the practical applications of these technologies. Here, a novel fiber preparation strategy was proposed to obtain a highly conductive porphyrin-based covalent organic framework (POR-COF) by one-step electropolymerization. Benefiting from the excellent semiconducting properties of porphyrin groups, the POR-COF can be spontaneously polymerized on the fiber surface under an appropriate voltage within a few hours. Its performance was evaluated by the EE-SPME of phthalate esters (PAEs) from food and environmental samples, followed by gas chromatography-tandem triple quadrupole mass spectrometry (GC-MS/MS) technology. The results showed that the POR-COF fiber has been successfully used for the detection of trace PAEs in beverages, industrial wastewater, lake water, and oyster samples with high adsorption selectivity and satisfactory sensitivity. The remarkable extraction properties are mainly attributed to the synergistic effect from material characteristics and electrical parameters' control in the extraction process. The presented strategy for the controlled design and synthesis of highly conductive porphyrin-based covalent organic framework fibers offers prospects in developing EE-SPME technologies.

Post-synthetic modification of a magnetic covalent organic framework with alkyne linkages for efficient magnetic solid-phase extraction and determination of trace basic orange II in food samples

Efficient magnetic solid phase extraction using covalent organic frameworks (COFs) can find important applications in food safety. In this work, a sulfonate-functionalized magnetic COF (Fe₃O₄@COF-SO₃Na) was synthesized by self-polycondensation of two-in-one monomer 1,6-bis(4-formylphenyl)-3,8-bis((4-aminophenyl) ethynyl)) pyrene (BFBAEPy) on the surface of aminated Fe₃O₄ and a thiol-yne click reaction. It was further adopted as an adsorbent for the efficient magnetic solid-phase extraction (MSPE) of basic orange II. The selective adsorption experiment indicated that it displayed selective adsorption ability to basic orange II due to the ion exchange, hydrogen bonds, and π-π interactions. Under the optimized conditions, the proposed MSPE method coupled with HPLC-DAD showed excellent linearity in the range of 0.05-0.5 µg/mL (R² = 0.9997) for basic orange II. The lower limits of detection (LODs) for basic orange II were 1.0-1.4 µg/L for three food samples: yellow croaker, paprika and dried bean curd. The recoveries were 90.1-98.8% with relative standard deviations (RSDs) below 4.2%. Therefore, this work provides an effective strategy to modify magnetic COFs as absorbents in MSPE. Due to the tunability of functional groups in thiol‑yne click reactions, the functional groups of magnetic COFs can be readily designed to enrich their multifunctional applications. Meanwhile, this work proposed a new method to detect trace amounts of basic orange II in food samples.

S,N-rich luminous covalent organic frameworks for Hg2+ detection and removal

The challenge for simultaneous detection and removal of Hg²⁺ is the design of bifunctional materials bearing abundant accessible chelating sites with high affinity. Covalent-organic frameworks (COFs) are attracting more and more attention as potential bifunctional materials for Hg²⁺ detection due to their large specific surface area, ordered pores, and abundant chelating sites. Here, a new luminous S,N-rich COF_BTT-AMPD based on hydrophilic block unit of 2,2'-azobis(2-methylpropionamidine) dihydrochloride (AMPD) was constructed, which improved the solubility and affinity for Hg²⁺ greatly. Another S-rich fused-ring unit of benzotrithiophene tricarbalaldehyde (BTT) enhanced the conjugation of COF_BTT-AMPD, and the methyl-rich chains block unit of AMPD effectively suppressed the aggregation-caused quenching. Thus, the COF_BTT-AMPD emitted strong fluorescence at 546 nm in liquid and solid as well as different solvent with a wide pH range, which was used for the visual detection and removal of Hg²⁺ (detection limit: 2.6 nM, linear range: 8.6 × 10^-3-20 μM, monolayer adsorption capacity: 476.19 mg g^-1) successfully. COF_BTT-AMPD-based fabric and light-emitting diode coatings were further constructed to realize the visual detection of Hg²⁺ vapor. The results reveal the potential of S,N-rich luminous COF_BTT-AMPD for Hg²⁺ detection and remediation in the environment.

Cage-Based Covalent Organic Framework for the Effective and Efficient Removal of Malachite Green from Wastewater

A cage-covalent organic framework (COF)-TP {T = bis(tetraoxacalix[2]arene[2]triazine); P = piperazine}, a novel two-dimensional covalent organic skeleton substituted with a nucleophilic cyanuric chloride analogue, was synthesized by a simple polymerization process. Cage-COF-TP is advantageous owing to its good structural order, permanent porosity, and low preparation cost. This skeleton was employed as a cost-effective adsorbent for the intermittent adsorption of an organic dye from aqueous solutions. Adsorption experiments were carried out at different initial dye concentrations, contact times, and solution pH. The adsorption kinetics followed the pseudo-second order model, and the results of thermodynamic studies were consistent with the Langmuir isotherm model. The high degree of matching between the size and shape of malachite green (MG) and the shrunken channels present in Cage-COF-TP were responsible for the enhanced adsorption ability of this material. Furthermore, theoretical calculations indicated that the high adsorption of the studied adsorbent can be attributed to the presence of nitrogen-rich triazine units in the Cage-COF-TP, which are expected to strengthen its affinity to guest molecules. The obtained results showed that the developed adsorbent is an efficient adsorbent that is theoretically capable of stimulating the removal of ∼2000 mg/g MG from wastewater at ambient temperature. This study will therefore be expected to promote the development of new functional materials based on COFs.

Sulfonic acid-functionalized covalent organic frameworks as the coating for stir bar sorptive extraction of fluoroquinolones in milk samples

Sulfonic acid-functionalized covalent organic frameworks (COF-SO₃) as a coating of stir bar sorptive extraction (SBSE) for capturing three fluoroquinolones from milk have been developed. The COF-SO₃ material was characterized by X-ray diffraction, scanning electron microscopy, X-ray photoelectron spectroscopy, and infrared spectroscopy. Milk without any typical treatments like protein precipitation and defatting was only diluted five times with water for test. Combined with high-performance liquid chromatography (HPLC), a SBSE-HPLC method was established for detecting fluoroquinolones in milk samples. The corresponding wide linear ranges (4.00-500.0 µg L^-1), low detection limits (1.20-2.62 µg L^-1), good test repeatability (RSD < 5.2%), and acceptable enrichment factors (56.2-61.5) were implemented for three fluoroquinolones. The analytical method was applied to determine trace targets and provided satisfactory results. Furthermore, the research displayed satisfied reproducibility for bar-to-bar (RSD < 6.5%) and batch-to-batch (RSD < 8.6%) tests.

Preparation of cationic hierarchical porous covalent organic frameworks for rapid and effective enrichment of perfluorinated substances in dairy products

Perfluorinated substances (PFASs) are harmful pollutants that have environmental persistence and high bioaccumulation. Effective sample pretreatment must be performed to detect trace or even ultra-trace PFASs in actual samples because of their extremely low contents in complex samples. In this study, a cationic hierarchical porous covalent organic frameworks (C-H-COF) were customized via a template-assisted strategy using polystyrene spheres (PS) as sacrificial materials and a post-synthetic modification method. C-H-COF showed good adsorption selectivity for PFASs owing to the dual effects of the full utilization of the internal adsorption sites and electrostatic interaction. The key role of electrostatic attraction in the extraction of PFASs using C-H-COF was further proven by density functional theory (DFT) calculations. The maximum adsorption capacity of the C-H-COF for perfluorooctanoic acid (PFOA) was 400 mg·g⁻¹, which was superior to that of microporous COFs (M-COF) and hierarchical porous COFs without cationic functionalization (H-COF). Accordingly, an analytical method for sensitively detecting five PFASs was established by employing C-H-COF as a dispersive solid phase extraction (DSPE) adsorbent combined with ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS), and the limits of detection were 0.011‒0.29 ng·L⁻¹. Moreover, the hierarchical porous structure of the C-H-COF accelerated the mass transfer of analytes so that the extraction process could be completed within 10 min. This method was employed to analyze PFASs in dairy products, in which the ultra-trace levels of analytes were quickly determined with spiked recoveries of 80.1‒112.6%. This work not only provides a rational synthetic strategy for novel ionic hierarchical porous COFs but also helps to expand the application of COFs in sample pretreatment.

Simultaneous Nitrite Resourcing and Mercury Ion Removal Using MXene-Anchored Goethite Heterogeneous Fenton Composite

The integrated system of gas-phase advanced oxidation process combined with sulfite-based wet absorption process is a desirable method for simultaneous removal of SO₂, NO, and Hg⁰, but due to the enrichment of nitrite and Hg²⁺, resourcing harmless wastewater is still a challenge. To tackle this problem, this study fabricated a bifunctional β-FeOOH@MXene heterogeneous Fenton material, of which the crystalline phase, morphology, structure, and composition were revealed by using X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy-energy dispersive x-ray spectroscopy, and transmission electron microscopy. It exhibits excellent performance on nitrite oxidation (99.5%) and Hg²⁺ removal (99.7%) and can maintain stable outstanding ability after 13 cycles, with superior Hg²⁺ adsorption capacity (395 mg/g) and ultralow Fe leaching loss (<0.018 wt %). The synergism between MXene and β-FeOOH appears as follows: (i) MXene, as an inductive agent, directionally converted Fe₂O₃ into β-FeOOH in the hydrothermal method and greatly reduced its monomer size; (ii) the introduced ≡Ti(III)/≡Ti(II) accelerated the regeneration of ≡Fe(II) via rapid electron transfer, thereby improving the heterogeneous Fenton reaction; and (iii) MXene strongly immobilized β-FeOOH to greatly inhibit Fe-leaching. HO^•, ^•O₂^--, and ¹O₂ were the main radicals identified by electron spin resonance. Radical quenching tests showed their contributions to NO₂^- oxidation in the descending order HO^• > ¹O₂ > ^•O₂^-. Quantum chemical calculations revealed that ^•OH-induced oxidation of NO₂^- or HNO₂ was the primary reaction path. Density functional theory calculations combined with X-ray photoelectron spectroscopy and Raman characterizations displayed the Hg²⁺ removal mechanism, with Hg₂Cl₂, HgCl₂, and HgO as the main byproducts. This novel material provides a new strategy for resourcing harmless wastewater containing nitrite and Hg²⁺.

Controllable synthesis of uniform large-sized spherical covalent organic frameworks for facile sample pretreatment and as naked-eye indicator

The successful application of covalent organic frameworks (COFs) depends on not only their unique chemical structures but also their morphology, size, and architecture. Spherical COFs (SCOFs) are attracted special attention due to the superiority of spherical materials in many applications. However, the synthesis of uniform large-sized SCOFs remains a challenge. Herein, by carefully optimizing the synthesis of a heteropore COF, we find that solvent type and catalyst concentration play important roles in determining the morphology and size of COFs, and eventually achieve the controllable synthesis of large SCOFs with uniform sizes ranging from 200 μm to 5 mm. The obtained SCOFs keep the dual-pore feature of the heteropore COF and show good stability and high crystallinity. To exhibit the superior application potential of SCOFs, the SCOFs with a size range of 200-300 μm were demonstrated to be promising solid-phase extraction (SPE) fillers. As-prepared SCOFs-packed SPE column could effectively remove ≥99% phytochrome matrix from 6 different vegetable samples in 10 s, accompanied by 72.56-112.37% recoveries of 33 chemical hazards with different physicochemical properties, thus showing greatly promising application prospects in sample pretreatment of nontargeted food safety analysis. By utilizing acid/base-adjusted reversible color change, millimeter-sized SCOFs were developed as an easy-to-operate and reusable naked-eye indicator of acids.

Multi-sulfonated functionalized hydrophilic covalent organic framework for highly efficient dye removal from real samples

A hydrophilic covalent organic framework (BTA-BDSA-COF) was successfully erected by introducing multi-sulfonated groups into a covalent framework structure and it can be easily applied to capture the cationic dye in real water samples.

Ionic Covalent Organic Frameworks for Energy Devices

Covalent organic frameworks (COFs) are a class of porous crystalline materials whose facile preparation, functionality, and modularity have led to their becoming powerful platforms for the development of molecular devices in many fields of (bio)engineering, such as energy storage, environmental remediation, drug delivery, and catalysis. In particular, ionic COFs (iCOFs) are highly useful for constructing energy devices, as their ionic functional groups can transport ions efficiently, and the nonlabile and highly ordered all-covalent pore structures of their backbones provide ideal pathways for long-term ionic transport under harsh electrochemical conditions. Here, current research progress on the use of iCOFs for energy devices, specifically lithium-based batteries and fuel cells, is reviewed in terms of iCOF backbone-design strategies, synthetic approaches, properties, engineering techniques, and applications. iCOFs are categorized as anionic COFs or cationic COFs, and how each of these types of iCOFs transport lithium ions, protons, or hydroxides is illustrated. Finally, the current challenges to and future opportunities for the utilization of iCOFs in energy devices are described. This review will therefore serve as a useful reference on state-of-the-art iCOF design and application strategies focusing on energy devices.

Dummy template based molecularly imprinted solid-phase microextraction coating for analysis of trace disinfection by-product of 2,6-dichloro-1,4-benzoquinone using high-performance liquid chromatography

Trace disinfection by-products (DBPs) produced during the disinfection of drinking water are potentially carcinogenic, teratogenic and mutagenic, which has aroused much attention recently. In this study, a molecularly imprinted (MIP) solid -phase microextraction (SPME) fiber coating was prepared by an in-situ polymerization method using a dummy template molecule for the analysis of trace 2,6-dichloroindole-1,4-benzoquinone (2,6-DCBQ), a typical DBP. The characterization results suggested that this monolithic SPME fiber under the optimized conditions had the porous structure, large surface area and good thermal stability. Due to the strong structural recognition and molecular interaction between MIP SPME coating and target molecule, it showed good extraction selectivity and capacity to trace 2,6-DCBQ with an imprinting factor of 4.7. Then, coupling with high-performance liquid chromatography (HPLC)-ultraviolet (UV) detection, a sensitive analytical method for trace 2,6-DCBQ in water samples was successfully established with a detection limit down to 2.3 ng/mL. The recoveries of the proposed method were in range of 84.4-122% with the relative standard deviations of 1.0-13% (n = 3). The results showed that this MIP SPME-HPLC-UV method possessed high analytical selectivity and sensitivity for trace 2,6-DCBQ in water, which would benefit the improvement of the practicability of DBPs monitoring and detection methodology.

In situ fabrication of chiral covalent triazine frameworks membranes for enantiomer separation

Rapid and high-flux enantiomer separation is significant for drug development. Membrane separation technology provides promising approaches for enantiomer separations. Porous membrane with good selectivity and high permeability is an ideal choice for enantiomer separations. Herein, we demonstrate the preparation of a novel two-dimensional chiral covalent triazine frameworks (CCTF) membrane by "in situ growth" method. Inheriting the strong chirality and specific interactions from CCTF, the CCTF membranes exhibited good enantioselectivity for drug intermediates and drug, including (R)/(S)-1-phenylethanol, (R)/(S)-1,1'-binaphthol and (R)/(S)-ibuprofen. Under optimal separation conditions, the enantiomeric excess value (e.e %) was above 21.7 % for (R)/(S)-1-phenylethanol, 12.0% for (R)/(S)-1,1'-binaphthol and 9.7 % for (R)/(S)-ibuprofen. The mechanism of the CCTF recognizing enantiomers were simulated by quantum mechanical calculations. In addition, the mechanism was also proved by the separation of enantiomers using this CCTF-modified silica column in liquid chromatography. The CCTF membrane may bring about the potentially application for large-scale production of chiral compounds. Meanwhile, this work provides a theoretical guidance for the application of CCOFs in enantiomer separation.

Multifunctional Zn-Ln (Ln = Eu and Tb) heterometallic metal-organic frameworks with highly efficient I2 capture, dye adsorption, luminescence sensing and white-light emission

A new family of isostructural 3d-4f heterometallic metal-organic frameworks (HMOFs), [Zn₃Eu_xTb_2-x(TZI)₄(DMA)₅(H₂O)₃]·4DMA [x = 0 (1), 0.3 (2), 0.6 (3), 0.9 (4), 1 (5), 1.2 (6), 1.5 (7), 1.8 (8), 2 (9)], has been synthesized using the 5-(4-(tetrazol-5-yl) phenyl)isophthalic acid (H₃TZI) ligand, Ln^III ions and Zn^II ions under solvothermal conditions. All HMOFs exhibit a (3,3,4,5,5)-connected 6³·6³(4²·6²·8²)(4·6⁵·8)(4·6⁶·8³) topology, which features three different types of motifs: one is a mononuclear Zn^II ion and the other two motifs are binuclear [Zn(COO)₃Ln] clusters. The adsorption experiments indicate that Zn₃Tb₂ (1) could efficiently remove almost all I₂ from cyclohexane solution after 12 h and also showed better adsorption towards neutral red (NR) dye (adsorption: only the Zn₃Tb₂ (1) was taken as one representative). Simultaneously, the luminescence sensing showed that Zn₃Tb₂ (1) and Zn₃Eu₂ (9) have excellent response and sensitivity towards pollutants such as Fe³⁺ ions and 2,4,6-trinitrophenol (TNP) with high selectivity and a fairly low limit of detection through luminescence quenching effect. Moreover, seven trimetallic-doped HMOFs 2-8 analogues of Zn₃Ln₂ (single) HMOFs were designed and prepared, showing different changes of luminescent color. More interestingly, Zn₃Eu_1.5Tb_0.5 (7) with white-light emission was fabricated by doping relative concentrations of Eu³⁺ and Tb³⁺ ions. To the best of our knowledge, Zn₃Eu_1.5Tb_0.5 (7) represents a novel kind of heterometallic Zn₃Ln₂ HMOFs with white-light emission. It could be deduced that the excellent characteristics, namely strong typical luminescence emission of Zn^II and Ln^III ions, microporous channels, active open metal sites (tetra-coordinated Zn^II-metal sites), and uncoordinated carboxylate O atoms and uncoordinated tetrazolate N atoms, made the above HMOFs an ideal platform for adsorption, luminescence sensing, and white-light emission. More significantly, these HMOFs are the first reported Zn-Ln heterometallic materials with the H₃TZI ligand.

Sulfonic acid functionalized hierarchical porous covalent organic frameworks as a SALDI-TOF MS matrix for effective extraction and detection of paraquat and diquat

Design and construction of a matrix with specific adsorption on the target compounds can effectively reduce the detection limit of surface-assisted laser desorption/ionization time-of-flight mass spectrometry (SALDI-TOF MS) analysis. Sulfonic acid functionalized hierarchical porous covalent organic frameworks (H-COF-SO₃H) was synthesized by defect-structure and post-modification method, and then used as matrix and adsorbent for the determination of quaternary ammonium herbicides paraquat (PQ) and diquat (DQ). N₂ adsorption-desorption experiments confirmed that H-COF-SO₃H possesses hierarchical porosity with pore widths concentrated at 1.3,1.5, and 2.8 nm. The strong UV absorption at 200-450 nm and good thermal stability made H-COF-SO₃H being a promising matrix without background interference. H-COF-SO₃H can efficiently enrich PQ and DQ via electrostatic attraction, and the key role of -SO₃H group on specific adsorption was confirmed by density functional theory (DFT) calculations. The limits of detection (LODs) for PQ and DQ with H-COF-SO₃H enrichment were 0.5 and 0.1 ng·mL^-1, respectively, which were 20 and 60 times higher than those without H-COF-SO₃H enrichment, respectively. The spiked recoveries of PQ and DQ for the three food samples were 92.0-113.2% and 80.1-102.6% with RSDs of 2.2-9.2% and 2.0-8.7%, respectively. This work provides an analyte-oriented approach for fabricating SALDI-TOF MS matrix.