Modish Designation of Hollow-Tubular rGO-NiMoO4@Ni-Co-S Hybrid Core-shell Electrodes with Multichannel Superconductive Pathways for High-Performance Asymmetric Supercapacitors

Construction of layered micro-/nano-structured MoNiCo-S cathode and broad bean shell derived carbon anode for hybrid supercapacitors

Transition metal sulfides, despite their abundance of electrochemically active sites, often demonstrate inadequate rate performance and mechanical stability. The development of a multi-dimensional hierarchical architecture has proven to be an effective approach to address the limitations associated with sulfides. In the present study, MoNiCo-S nanorods featuring hierarchical micro-/nano-structures were successfully synthesized through a straightforward methodology that involved "in situ growth-etching-vulcanization". The one-dimensional nanostructure CoMoO4 served as both the substrate and metal source for the in-situ growth of ZIF-67. Subsequently, Lewis acid was introduced to facilitate the formation of hydroxides, ultimately leading to the synthesis of sulfides via ion exchange with sulfur ions. Due to its rational design and element composition, MoNiCo-S exhibited excellent capacitance (3125.1 F/g at 1 A/g) and cycling stability (capacitance retention rate of 72.9 % over 5,000 cycles). In addition, the broad bean shell derived carbon (KBBC), prepared through a carbonization and activation process, demonstrated a specific capacitance of 295.0 F/g and a cyclic capacitance retention of 99.6 %. The assembled MoNiCo-S//KBBC asymmetric supercapacitor devices achieves a high energy density of 78.5 Wh kg-1 at a power density of 1004.3 W kg-1. After 10,000 cycles, the device exhibited a capacitance retention rate of 107.9 %, indicating excellent cycling stability. This research contributes significantly to the advancement of sulfide materials in the context of performance optimization design.

Polyoxometalate Etching of NMO@NF for Highly Efficient Oxygen Evolution Reaction in Water Splitting

In this study, PTA&PMA/NiMoO4@NF was synthesized on nickel foam through wet chemical etching to promote the kinetics of the oxygen evolution reaction (OER) effectively. OER benefits from two cationic (Ni and Mo) defects and the optimized electronic configuration of PTA&PMA/NiMoO4@NF. Thus, it only needs 200 mV to reach the current density of 10 mA cm-2 in 1.0 mol/L of KOH. This value is nearly 100 mV lower than the value needed by pure NiMoO4. After being used as an anode for water splitting in an alkaline solution, the as-obtained catalyst can operate at a current density of 10 mA cm-2 for 24 h of good stability. The synthesis strategy adopted in this study can provide an effective, low-cost, simple, and convenient strategy for improving the OER electrocatalytic performance of other transition metal oxides.

Multicomponent Co2O3@CoMo2S4 Core-Shell Structures as a Binder-Free Electrode for Cycling Stability Supercapacitors

Transitional bimetallic sulfides have garnered significant interest due to their versatile redox reactions, strong electrochemical activity, and cost-effectiveness. However, their low energy density and poor rate performance have hindered their use in energy storage systems. To overcome these challenges, we have developed a Co2O3@CoMo2S4 core-shell structure using a strategic design approach, serving as a conductive framework for supercapacitors. The innovative Co2O3@CoMo2S4 core-shell structure exhibits exceptional performance, achieving a specific capacitance of 4951.8 F g-1 at 1 A g-1 and retaining 90.85% cyclic stability after 5500 cycles, outperforming most reported transitional bimetallic sulfides. The Co2O3@CoMo2S4//AC supercapacitor achieves an energy density of 41.66 Wh kg-1 and a power density of 0.35 kW kg-1. Our research paves the way for the development of transitional bimetallic sulfides with core-shell structures that offer superior performance in supercapacitor applications, providing valuable insights for future advancements in the field.

Enhanced Energy Storage Properties and DFT Investigation of a Zn-Co-Mo Heterojunction Rich in Oxygen Vacancies with Dual Electron Transport Pathways

Petal-like heterojunction materials ZnCo2O4/CoMoO4 with abundant oxygen vacancies are prepared on nickel foam (NF) using modified ionic hybrid thermal calcination technology. Nanoscale ion intermixing between Zn and Mo ions induces oxygen vacancies in the annealing process, thus creating additional electrochemical active sites and enhancing the electrical conductivity. The ZnCo2O4/CoMoO4 conductive network skeleton forms the primary transport pathway for electrons, while the internal electric field of the heterojunction serves as the secondary pathway. ZnCo2O4/CoMoO4 exhibits excellent rate performance and high capacity attributable to its unique double electron transport mode and the effect of oxygen vacancies. The initial discharge capacity at a current of 0.1 A g-1 is approximately 1774 mAh g-1, and the reversible capacity remains at 1100 mAh g-1 after 200 cycles. After a high current of 1 A g-1, the reversible capacity is observed to remain at approximately 1240 mAh g-1. The electronic structure, crystal structure, and work function of the heterojunction interface model are then analyzed by density functional theory (DFT). The analysis results indicate that the charge at the ZnCo2O4/CoMoO4 interface is unevenly distributed, which leads to an enhanced degree of electrochemical reaction. The presence of an internal electric field improves the transport efficiency of the carriers. Experimental and theoretical calculations demonstrate that the ZnCo2O4/CoMoO4 anode material designed in this work provides a reference for fabricating transition metal oxide-based lithium-ion batteries.

Core-shell heterostructured Ni(OH)2@activation Zn-Co-Ni layered double hydroxides electrode for flexible all-solid-state coaxial fiber-shaped asymmetric supercapacitors

The increasing requirements for wearable and portable electronics are driving the interests of high performance fiber supercapacitor. Layered double hydroxide (LDH) is broadly used in electrode materials, owing to the adjustability of components and the unique lamellar structure. However, limited active sites and poor electrical conductivity hinder its applications. Herein, the core-shell heterostructured Ni(OH)2@activation Zn-Co-Ni layered double hydroxides (Ni(OH)2@A-ZnCoNi-LDH) electrode was fabricated by loading pseudocapacitance material on the A-ZnCoNi-LDH to improve the electrochemical performance. Significantly, benefits from the synergistic effect of the multi-metal ions and the core-shell heterostructure, the electrodes demonstrated a capacitance of 2405 mF·cm-2 at 1 mA·cm-2. Furthermore, Ni(OH)2@A-ZnCoNi-LDH was used as the core electrode and carbon nanotube (CNT) film coated with Fe2O3@reduced graphene oxide (rGO) was wrapped around the core electrode to assemble coaxial fiber asymmetric supercapacitor, which illustrated an ultrahigh energy density of 177.7 µWh·cm-2 at 0.75 mW·cm-2. In particular, after consecutive charging and discharging 7000 cycles, the capacitance retention of the device was 95 %, indicating the excellent cycling stability. Furthermore, the device with high flexibility can be woven into textiles in different shapes. The fabricated device has an excellent development prospect as an energy source in wearable electronic devices.

ZIF-derived sulfides with tremella-like core-shell structure for high performance supercapacitors

Metal-organic frameworks (MOFs) have emerged as promising active electrode materials in supercapacitors for its controllable porous structure and excellent physio-chemical properties. However, the poor conductivities keep it from achieving its full capacitance potential, which greatly limits its practical application. Here, a facile pathway is reported to fabricate the GO/Ni2ZnS4@NiCo2S4 composite with large specific surface area and favorable electrical conductivity. Thanks to the novel tremella-like core-shell structure and high-efficient synergistic effects among multi-components, the designed GO/Ni2ZnS4@NiCo2S4 electrode shows a high specific capacitance of 2284 F/g at 1 A/g. Furthermore, the asymmetric supercapacitor fabricated by coupling GO/Ni2ZnS4@NiCo2S4 positive electrode with biological carbon negative electrode achieves a remarkable energy density of 120 Wh kg-1 at a power density of 750 W kg-1.

Promoted OH- adsorption and electron-transfer kinetics by electrospinning mono-disperse NiCo2S4 nanocrystals within porous CNFs for solid asymmetric supercapacitors

Bimetallic sulfide NiCo2S4 has been regarded as a potential supercapacitor electrode material with excellent electrochemical performance. However, the origin of its high specific capacity is little studied, and the design of a rational structure still remains a challenge to exert its intrinsic advantage. In this work, the advantage of NiCo2S4 over NiS and CoS is explained by density functional theory calculation from the aspects of energy band, density of electronic states and OH- adsorption energy. It is proved that the synergistic effect of Ni and Co in NiCo2S4 can reduce its OH- adsorption energy and provide more active electrons near the Fermi level, thus promoting electrochemical reaction kinetics in supercapacitors. Then, a simple electrospinning method is used to in-situ load mono-disperse NiCo2S4 nanocrystals within amorphous carbon nanofibers, obtaining a porous, lotus-leaf-stem-like one-dimensional nanocomposite of NiCo2S4/CNF. Ex-situ XPS characterization confirms that the proportion of metal ions involved in electrochemical reactions and the number of transferred electrons in NiCo2S4/CNF during the redox reaction are significantly higher than those in mono-metallic sulfides (NiS/CNF and CoS/CNF), verifying the calculation results. With its boosting reaction kinetics, the NiCo2S4/CNF gives the specific capacity of 757.97C g-1 at 1 A/g and the capacity retention of 95.15 % after 10,000 cycles at 5 A/g, both greater than NiS/CNF and CoS/CNF. The NiCo2S4/CNF, as the positive electrode, and activated carbon, as the negative electrode, are assembled into liquid-state and solid-state asymmetric supercapacitor (ASC) devices, and both show high power density (760.6 W kg-1 for liquid-state device and 1067.4 W kg-1 for solid-state device), high energy density (52.25 Wh kg-1 for liquid-state device and 48.54 Wh kg-1 for solid-state device) and great cycle stability. Moreover, the solid-state ASC device possesses excellent low temperature capacity and reversibility, further demonstrating the wide application potential of the NiCo2S4/CNF composite.

Nanoarchitectonics of Three-Dimensional Carbon Nanofiber-Supported Hollow Copper Sulfide Spheres for Asymmetric Supercapacitor Applications

Three-dimensional carbon nanofiber (3D-CNF)-supported hollow copper sulfide (HCuS) spheres were synthesized by the facile hydrothermal method. The morphology of the as-synthesized HCuS@3D-CNF composite clearly revealed that the 3D-CNFs act as a basement for HCuS spheres. The electrochemical performance of as-synthesized HCuS@3D-CNFs was evaluated by cyclic voltammetry (CV) tests, gravimetric charge-discharge (GCD) tests, and Nyquist plots. The obtained results revealed that the HCuS@3D-CNFs exhibited greater areal capacitance (4.6 F/cm²) compared to bare HCuS (0.64 F/cm²) at a current density of 2 mA/cm². Furthermore, HCuS@3D-CNFs retained excellent cyclic stability of 83.2% after 5000 cycles. The assembled asymmetric device (HCuS@3D-CNFs//BAC) exhibits an energy density of 0.15 mWh/cm² with a working potential window of 1.5 V in KOH electrolyte. The obtained results demonstrate that HZnS@3D-CNF nanoarchitectonics is a potential electrode material for supercapacitor applications.

Silicon Carbide Nanostructures as Potential Carbide Material for Electrochemical Supercapacitors: A Review

Silicon carbide (SiC) is a very promising carbide material with various applications such as electrochemical supercapacitors, photocatalysis, microwave absorption, field-effect transistors, and sensors. Due to its enticing advantages of high thermal stability, outstanding chemical stability, high thermal conductivity, and excellent mechanical behavior, it is used as a potential candidate in various fields such as supercapacitors, water-splitting, photocatalysis, biomedical, sensors, and so on. This review mainly describes the various synthesis techniques of nanostructured SiC (0D, 1D, 2D, and 3D) and its properties. Thereafter, the ongoing research trends in electrochemical supercapacitor electrodes are fully excavated. Finally, the outlook of future research directions, key obstacles, and possible solutions are emphasized.

Preparation of rambutan-like Co0.5Ni0.5Fe2O4 as anode for high–performance lithium–ion batteries

NiFe₂O₄ is a kind of promising lithium ion battery (LIB) electrode material, but its commercial applications have been limited due to the electronic insulation property and large volume expansion during the conversion reaction process, which results in rapid capacity decrease and poor cycling stability. We synthesized rambutan-like Co_0.5Ni_0.5Fe₂O₄ using the self-templating solvothermal method. The special structure of Co_0.5Ni_0.5Fe₂O₄ which was formed by the assembly of numerous nanosheets could effectively buffer the volume change during the charging and discharging process. Partial substitution of Ni with Co. in NiFe₂O₄ leads to Co_0.5Ni_0.5Fe₂O₄, the coexisting of both nickel and cobalt components is expected to provide more abundant redox reactions. The specific capacity of the rambutan-like Co_0.5Ni_0.5Fe₂O₄ as an anode material for LIB could reach 963 mA h g⁻¹ at the current density of 500 mA g⁻¹ after 200 cycles, confirming that the as-synthesized material is a promising candidate for LIBs.

Synchronous Defect and Interface Engineering of NiMoO4 Nanowire Arrays for High-Performance Supercapacitors

Developing high-performance electrode materials is in high demand for the development of supercapacitors. Herein, defect and interface engineering has been simultaneously realized in NiMoO4 nanowire arrays (NWAs) using a simple sucrose coating followed by an annealing process. The resultant hierarchical oxygen-deficient NiMoO4@C NWAs (denoted as "NiMoO4-x@C") are grown directly on conductive ferronickel foam substrates. This composite affords direct electrical contact with the substrates and directional electron transport, as well as short ionic diffusion pathways. Furthermore, the coating of the amorphous carbon shell and the introduction of oxygen vacancies effectively enhance the electrical conductivity of NiMoO4. In addition, the coated carbon layer improves the structural stability of the NiMoO4 in the whole charging and discharging process, significantly enhancing the cycling stability of the electrode. Consequently, the NiMoO4-x@C electrode delivers a high areal capacitance of 2.24 F cm-2 (1720 F g-1) at a current density of 1 mA cm-2 and superior cycling stability of 84.5% retention after 6000 cycles at 20 mA cm-2. Furthermore, an asymmetric super-capacitor device (ASC) has been constructed with NiMoO4-x@C as the positive electrode and activated carbon (AC) as the negative electrode. The as-assembled ASC device shows excellent electrochemical performance with a high energy density of 51.6 W h kg-1 at a power density of 203.95 W kg-1. Moreover, the NiMoO4//AC ASC device manifests remarkable cyclability with 84.5% of capacitance retention over 6000 cycles. The results demonstrate that the NiMoO4-x@C composite is a promising material for electrochemical energy storage. This work can give new insights on the design and development of novel functional electrode materials via defect and interface engineering through simple yet effective chemical routes.

Interfacially coupled thin sheet-like NiO/NiMoO4 nanocomposites synthesized by a simple reflux method for excellent electrochemical performance

Herein, hierarchical sheet-like assemblies of interfacially coupled NiO/NiMoO₄ (NNMO) nanocomposites are prepared by a simple and cost-effective one-step aqueous reflux method followed by post-thermal treatment. The reaction time is optimized for a high precursor yield and the homogeneity of the final product. The fabricated electrodes with varying amounts of active material and conducting carbon show better electrochemical activity for 50 : 50 weight ratio combinations as extrinsic pseudocapacitors. The optimized NNMO-3 electrode (obtained from the Ni-Mo hydroxide precursor during the 10 h reaction time) exhibits superior performance among all the tested nanocomposite electrodes like a high specific capacity of 649.8 C g^-1 (1624.5 F g^-1) and 73.5% retention of capacity after 2200 cycles at a specific current of 1.0 A g^-1 along with satisfactory rate capability (42.5% retention after a ten-times increment in specific current), which may be attributed to the abundant electroactive sites due to the high bulk as well as electrochemically active surface area, mesoporous structure, and synergistic coupling between the optimum compositions of NiO and NiMoO₄ within the sheet-like networks. Moreover, an aqueous asymmetric supercapacitor is assembled by employing NNMO-3 and activated carbon as the positive and negative electrodes, respectively, and exhibits a maximum specific capacity of 216.2 C g^-1 (144.1 F g^-1), specific energy of 45.0 W h kg^-1 at a specific power of 750.0 W kg^-1, promising rate capability of 58.5%, and good cycling stability with 86.2% capacitive retention after 2500 charge-discharge cycles. Based on the overall performance, we can infer that the NNMO-3 nanocomposite may be a promising electrode material for high-performance supercapacitor applications.

Freestanding trimetallic Fe-Co-Ni phosphide nanosheet arrays as an advanced electrode for high-performance asymmetric supercapacitors

Transition metal phosphides hold great promise for high performance battery-type electrode materials due to their superb electrical conductivity and high theoretical capacity. Unfortunately, the electrochemical properties of single metal or bimetallic phosphides are unsatisfactory owing to their low energy density and poor cyclic stability, and one feasible approach is to introduce heteroatoms to form trimetallic phosphides. Here, novel Fe-Co-Ni-P nanosheet arrays are in situ synthesized on a flexible carbon cloth substrate via an electrodeposition method followed by a phosphorization treatment. Due to the presence of abundant redox active sites, large specific surface area with mesoporous channels, desirable electrical conductivity, modified electronic structure, and synergistic effect of Fe, Co, and Ni ions, the as-prepared Fe-Co-Ni-P electrode displays significantly enhanced electrochemical performance when compared to bimetallic phosphides Fe-Co-P and Fe-Ni-P. Remarkably, the Fe-Co-Ni-P electrode exhibits a large specific capacity of 593.0 C g^-1 at 1 A g^-1, exceptional rate performance (80.3% capacity retention at 20 A g^-1), and good cycling stability (84.2% capacity retention after 5000cycles). Besides, an asymmetric supercapacitor device with Fe-Co-Ni-P electrode as a positive electrode and a hierarchical porous carbon as a negative electrode shows a high energy density of 57.1 Wh kg^-1 at a power density of 768.5 W kg^-1 as well as excellent cyclability with 88.4% of initial capacity after 10,000cycles. This work manifests that the construction of trimetallic phosphides is an effective strategy to solve the shortcomings of single or bimetallic phosphides for high-performance supercapacitors.

Hydrangea-like NiMoO4-Ag/rGO as Battery-type electrode for hybrid supercapacitors with superior stability

It is a great challenge to design electrode materials with good stability and high specific capacitance for supercapacitors. Herein, a three-dimensional (3D) hydrangea-like NiMoO₄ micro-architecture with Ag nanoparticles anchored on the surface has been designed by adding EDTA-2Na, which was assembled with reduced graphene oxide (rGO) and named as NiMoO₄-Ag/rGO composite. Benefiting from the synergetic contributions of structural and componential properties, NiMoO₄-Ag/rGO composite exhibits a high specific capacitance of 566.4 C g^-1 at 1 A g^-1, and great cycling performance with 90.5% capacitance retention after 1000 cycles at 10 A g^-1. The NiMoO₄-Ag/rGO electrode shows an enhanced cycling stability due to the two-dimensional towards two-dimensional (2D-2D) interface coupling between rGO and NiMoO₄ nanosheets, and the stable 3D hydrangea-like micro-architecture. Moreover, NiMoO₄-Ag/rGO with 5-15 nm pore structure and enhanced conductivity exhibits improved charge transfer and ions diffusion. Besides, NiMoO₄-Ag/rGO//AC capacitor displays an outstanding energy density of 40.98 Wh kg^-1 at 800 kW kg^-1, and an excellent cycling performance with 73.3% capacitance retention at 10 A g^-1 after 8000 cycles. The synthesis of NiMoO₄-Ag/rGO composite can provide an effective strategy to solve the poor electrochemical stability and slow electron/ion transfer of NiMoO₄ material as supercapacitors electrode.

An electrochemically reduced ultra-high mass loading three-dimensional carbon nanofiber network: a high energy density symmetric supercapacitor with a reproducible and stable cell voltage of 2.0 V

Commercial supercapacitors need a high mass loading of more than 10 mg cm^-2 and a high working potential window to resolve the low energy density concern. Herein, we have demonstrated a thick, ultrahigh mass loading (35 mg cm^-2) and wide cell voltage electrochemically reduced layer-by-layer three-dimensional carbon nanofiber network (LBL 3D-CNF) electrode via electrospinning, sodium borohydride treatment, carbonization, and electro-reduction techniques. During the electro-reduction technique, Na⁺ is adsorbed onto the various defect sites of LBL 3D-CNFs, which properly inhibits the formation of the intermediate HER (hydrogen evolution reaction) product, leading to a wide cell voltage, whereas the LBL 3D-CNF network evokes an opportunity for storing a greater number of charges, resulting in excellent electrochemical performances. A symmetric supercapacitor with a reproducible and stable cell voltage of 2.0 V is constructed and demonstrated. The as-constructed device can deliver an areal energy output of 1922 μW h cm^-2 at a power density of 3979 W kg^-1 equal to a gravimetric energy density of 27 W h kg^-1, and an outstanding cyclic durability of 97.4% after 20 000 GCD cycles. These record-breaking performances would make our device one of the most promising candidates from an industrial point of view.

Rational synthesis of CoFeP@nickel-manganese sulfide core-shell nanoarrays for hybrid supercapacitors

Transition metal phosphide electrodes, particularly those with unique morphologies and micro-/nanostructures, have demonstrated desirable capabilities for hybrid supercapacitor applications by virtue of their superior electrical conductivity and high electrochemical activity. Here, three-dimensional hierarchical CoFeP@nickel-manganese sulfide nanoarrays were in situ constructed on a flexible carbon cloth via a hydrothermal method, a phosphorization process, followed by an electrodeposition approach. In this smart nanoarchitecture, CoFeP nanorods grown on carbon cloth act as the conductive core for rapid electron transfer, while the nickel-manganese sulfide nanosheets decorated on the surface of CoFeP serve as the shell for efficient ion diffusion, forming a stable core-shell heterostructure with enhanced electrical conductivity. Benefiting from the synergy of the two components and the generation of a heterointerface with a modified electronic structure, The CoFeP@nickel-manganese sulfide electrodes deliver a high capacity of 260.7 mA h g^-1 at 1 A g^-1, excellent rate capability, and good cycling stability. More importantly, an aqueous hybrid supercapacitor based on CoFeP@nickel-manganese sulfide as a positive electrode and a lotus pollen-derived hierarchical porous carbon as a negative electrode is constructed to display a maximum energy density of 60.1 W h kg^-1 at 371.8 W kg^-1 and a good cycling stability of 85.7% capacitance retention after 10 000 cycles.

Embellishing hierarchical 3D core-shell nanosheet arrays of ZnFe2O4@NiMoO4 onto rGO-Ni foam as a binder-free electrode for asymmetric supercapacitors with excellent electrochemical performance

Tailoring hierarchical hybrid core-shell electrodes with impartial microstructural features and excellent electroactive constituents is crucial for the design of high-performance supercapacitors (SCs). Herein, for the first time, we fabricate uniformly aligned porous ZnFe₂O₄ (ZFO) nanosheet arrays onto reduced graphene oxide-garnished conductive Ni foam (rGO-NF) substrates and subsequently embellish the first layer of ZFO nanosheets with morphology-controlled secondary NiMoO₄ nanosheets to achieve a hierarchical 3D core-shell structure of ZnFe₂O₄@NiMoO₄ nanosheet arrays (NSAs) onto rGO-NF for SC applications. Improving the synergistic effect of the core-shell nanoarchitecture with a conductive rGO-NF substrate, the hierarchical 3D ZFO@NMO NSAs tend to have superb electronic conductivity, tailoribility, effective nanoporous channels, and appropriate roadways for rapid ion/electron transfer, which are required for rapid reversible redox reactions, thus reflecting the excellent electrochemical features, including the excellent specific capacitance, good rate performance, and prolonged cyclic performance of the three electrode assemblies for SCs. An asymmetric supercapacitor (ASC) device composed of ZFO@NMO NSAs@rGO-NF as the cathode and MOF-derived hollow porous carbon (MDHPC) as the anode exhibits a high energy density of 58.6 Wh kg^-1 at a power density of 799 W kg^-1 with prolonged cyclic durability (89.6 % after 7000 cycles), thus indicating its potential applicability towards advanced hybrid SCs.

Recent Progress in Metal-Organic Framework-Derived Nanostructures in the Removal of Volatile Organic Compounds

Air is the most crucial and life-supporting input from nature to the living beings of the planet. The composition and quality of air significantly affects human health, either directly or indirectly. The presence of some industrially released gases, small particles of anthropogenic origin, and the deviation from the normal composition of air from the natural condition causes air pollution. Volatile organic compounds (VOCs) are common contaminants found as indoor as well as outdoor pollutants. Such pollutants represent acute or chronic health hazards to the human physiological system. In the environment, such polluted gases may cause chemical or photochemical smog, leading to detrimental effects such as acid rain, global warming, and environmental pollution through different routes. Ultimately, this will propagate into the food web and affect the ecosystem. In this context, the efficient removal of volatile organic compounds (VOCs) from the environment remains a major threat globally, yet satisfactory strategies and auxiliary materials are far from being in place. Metal–organic frameworks (MOFs) are known as an advanced class of porous coordination polymers, a smart material constructed from the covalently bonded and highly ordered arrangements of metal nodes and polyfunctional organic linkers with an organic–inorganic hybrid nature, high porosities and surface areas, abundant metal/organic species, large pore volumes, and elegant tunability of structures and compositions, making them ideal candidates for the removal of unwanted VOCs from air. This review summarizes the fundamentals of MOFs and VOCs with recent research progress on MOF-derived nanostructures/porous materials and their composites for the efficient removal of VOCs in the air, the remaining challenges, and some prospective for future efforts.

Engineering triangular bimetallic metal-organic-frameworks derived hierarchical zinc-nickel-cobalt oxide nanosheet arrays@reduced graphene oxide-Ni foam as a binder-free electrode for ultra-high rate performance supercapacitors and methanol electro-oxidation

The rigorous fabrication of electrode materials using upper-ranked porous precursor especially metal organic frameworks (MOFs) are challenging but appealing task to procure electrochemical energy storage and conversion system with altitudinous performance. Herein, we replenish the rational construction of atypical electrode of hollow Zn-Ni-Co-oxide (ZNCO) nanosheet arrays onto rGO garnished Ni foam (rGO/NF) via two step solution based method. Firstly, 2D Zn-Co-MOFs derived nanoleave arrays are prepared by co-precipitation method. Next, hollow and porous ZNCO nanostructure from 2D solid nanoleave arrays are achieved by ion-exchange and etching process conjoined with post annealing treatment. The as-fabricated hierarchical ZNCO nanosheet arrays offer large numbers of electroactive sites with short ion-diffusion pathways, reflecting the outstanding electrochemical performance in-terms of excellent specific capacity (267 mAh g^-1) ultra-high rate capability (83.82% at 50 A/g) and long-term cycling life (~90.16%) in three electrode configuration for supercapacitor (SCs). Moreover, the hollow and porous ZNCO nanostructure responds as immensely active and substantial electrocatalyst for methanol oxidation with lowest onset potential of 0.27 V. To demonstrate the practicability, hybrid supercapacitor (HSC) device is constructed using ZNCO@rGO-NF nanostructure as positive and rGO decorated MOF derived porous carbon (rGO-MDPC) as negative electrode. The as-assembled ZNCO//rGO-MDPC ASC device delivers higher energy density of 61.25 Wh kg^-1 at the power density of 750 W kg^-1 with long-term cyclic stability (<6% to its initial specific capacity value) after 6000 cycles.

2D Bismuth nanosheet arrays as efficient alkaline hydrogen evolution electrocatalysts

Bismuth nanosheets were prepared using ethylene glycol, which exhibit low overpotential and show great potential in the field of hydrogen evolution reaction.