A Novel Strategy to Enhance the Performance of CO2 Adsorption Separation: Grafting Hyper-cross-linked Polyimide onto Composites of UiO-66-NH2 and GO

Mechanochemical Synthesis of Graphene Oxide/UiO-66-NH2 Nanocomposites: Characterization and Fabrication of an Electrochemical Sensor for the Determination of Tetracycline Residues in Milk Samples

This paper describes a green mechanochemical approach for the synthesis of a graphene oxide-based UiO-66-NH2 metal organic framework composite (GO/UiO-66-NH2) for the fabrication of a sensitive electrochemical sensor for the determination of tetracycline (TC) residues in milk samples. The structural and electrochemical characteristics of the GO/UiO-66-NH2 nanocomposite were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), FT-IR spectroscopy, and cyclic voltammetry (CV). Incorporation of UiO-66-NH2 onto the GO surface can increase the number of effective reaction sites and improve the electrochemical performance of the fabricated sensor. The sensor was simply prepared through drop-casting a GO/UiO-66-NH2 suspension onto the glassy carbon electrode surface and used for TC determination by differential pulse voltammetry (DPV) as a sensitive analytical method. The fabricated sensor provided a linear calibration over the concentration ranges of 0.02-1.00 μg mL-1 (R 2 = 0.9921) and 1.00-40 μg mL-1 (R 2 = 0.9932) with a limit of detection of 0.003 μg mL-1 using DPV. The proposed sensor was successfully applied to measure the TC residues in different milk samples with satisfying recovery from 94.0 to 105.0%.

Synthesis and characterization of advanced Ad-UiO-66@NGO composite for efficient CO2 capture and CO2/N2 adsorption selectivity

Highly effective adsorbents, with their impressive adsorption capacity and outstanding selectivity, play a pivotal role in technologies such as carbon capture and utilization in industrial flue gas applications, leading to significant reductions in greenhouse gas emissions. This study aims to synthesize advanced composites via solvothermal methods, incorporating a defective Zirconium-based MOF and amine-functionalized graphene oxide. The main objective is to enhance the CO2 adsorption capacity of the composite and improve its CO2/N2 separation selectivity. The samples were characterized using XRD, FT-IR, TGA, FE-SEM, and nitrogen adsorption and desorption analysis. The composites' gas uptake capacity toward pure CO2 and N2 adsorption were tested at various temperatures and pressure ranges of 1-9 bar. The resulting amino-defective UiO-66/NGO composite containing 15 wt% of amine-modified GO, displayed the highest CO2 uptake capacity of 15.13 mmol/g at 298 K and 9 bar, representing a remarkable 48% increase compared to the pristine MOF. Furthermore, isotherm and kinetic modeling showed a high level of agreement between the experimental data and the Freundlich and Elovich models, as indicated by their R2 values of 0.998 and 0.973, respectively. Moreover, the thermodynamic evaluation confirmed the exothermic and the spontaneity of the reaction. Furthermore, the adsorbent's CO2/N2 selectivity was evaluated using the ideal adsorbed solution theory, revealing a remarkable selectivity value of 148. The regenerability evaluation through cyclic adsorption experiments showed that the optimized composite maintained CO2 adsorption reversibility at over 81.50% after 55 adsorption-desorption cycles.

Zr-MOFs (UIO-66-NH2)@Fluorinated Graphene for Developing Highly Antiwear, Friction-Reduction Lubricating Additives

Fluorinated graphene (FG) among numerous two-dimensional materials has enormous potential in improving antifriction properties. However, they being susceptible to thermal oxidation and prone to wear hinder practical applications. Herein, UIO-66-NH2 (Zr-MOF) enjoying good chemical and thermal stabilities was assembled on the surface of FG nanosheets under covalent bonds and van der Waals forces. The Zr-MOF@FG composite was successfully synthesized and used as a lubricant additive. It can be seen that Zr-MOF@FG composites offer a synergistic lubricant mechanism at the friction interface. Moreover, due to the adsorption and purification performance of Zr-MOF, the obtained Zr-MOF@FG composite adsorbs the abrasive rust during the friction process, thereby realizing the purification of the lubricant. These findings suggest that Zr-MOF@FG shows tremendous potential as a lubricant additive.

Immobilization β-glucosidase from Dictyoglomus thermophilum on UiO-66-NH2: An efficient catalyst for enzymatic synthesis of kinsenoside via reverse hydrolysis reaction

Kinsenoside is a rare and valuable glycoside with extensive bioactivities. However, the enzymatic synthesis of kinsenoside has been a challenging task due to the limited enzyme toolbox and unsatisfactory yield. Herein, the β-glucosidase from Dictyoglomus thermophilum (DtBGL) was heterologously expressed, purified and enzymatically characterized. The purified DtBGL was successfully immobilized on the metal-organic frameworks of UiO-66-NH2. The DtBGL@UiO-66-NH2 was fully characterized using SEM, XRD, TGA and FTIR. The studies on enzymatic properties demonstrated that DtBGL@UiO-66-NH2 exhibited increased catalytic activity and stability compared to the free DtBGL. Particularly, DtBGL@UiO-66-NH2 could catalyze the synthesis of kinsenoside via the reverse hydrolysis reaction and the kinsenoside yield was 34.12 % under the optimized catalytic system, which was 1.9-fold higher compared with the free DtBGL. Moreover, DtBGL@UiO-66-NH2 displayed good reusability with a kinsenoside yield of 27.02 % after reuse for 3 times. The present work not only identifies and characterizes a highly active β-glucosidase with reverse hydrolysis activity, but also proposes the immobilized enzyme as an effective catalyst for the industrial production of glycosides.

Modified Ce/Zr-MOF Nanoparticles Loaded with Curcumin for Alzheimer's Disease via Multifunctional Modulation

Introduction

Alzheimer's disease (AD), a neurodegenerative condition, stands as the most prevalent form of dementia. Its complex pathological mechanisms and the formidable blood-brain barrier (BBB) pose significant challenges to current treatment approaches. Oxidative stress is recognized as a central factor in AD, underscoring the importance of antioxidative strategies in its treatment. In this study, we developed a novel brain-targeted nanoparticle, Ce/Zr-MOF@Cur-Lf, for AD therapy.

Methods

Layer-by-layer self-assembly technology was used to prepare Ce/Zr-MOF@Cur-Lf. In addition, the effect on the intracellular reactive oxygen species level, the uptake effect by PC12 and bEnd.3 cells and the in vitro BBB permeation effect were investigated. Finally, the mouse AD model was established by intrahippocampal injection of Aβ1-42, and the in vivo biodistribution, AD therapeutic effect and biosafety of the nanoparticles were researched at the animal level.

Results

As anticipated, Ce/Zr-MOF@Cur-Lf demonstrated efficient BBB penetration and uptake by PC12 cells, leading to attenuation of H2O2-induced oxidative damage. Moreover, intravenous administration of Ce/Zr-MOF@Cur-Lf resulted in rapid brain access and improvement of various pathological features of AD, including neuronal damage, amyloid-β deposition, dysregulated central cholinergic system, oxidative stress, and neuroinflammation.

Conclusion

Overall, Ce/Zr-MOF@Cur-Lf represents a promising approach for precise brain targeting and multi-target mechanisms in AD therapy, potentially serving as a viable option for future clinical treatment.

Improving CO2 adsorption efficiency of an amine-modified MOF-808 through the synthesis of its graphene oxide composites

This research developed a novel composite of MOF-NH2 and graphene oxide (GO) for enhanced CO2 capture. Employing the response surface methodology-central composite design (RSM-CCD) for experiments design, various MOF-NH2/GO samples with GO loadings from 0 to 30 wt% were synthesized. The results of SEM, XRD, EDS, and BET analysis revealed that the materials maintained their MOF crystal structure, confirmed by X-ray diffraction, and exhibited unique texture, high porosity, and oxygen-enriched surface chemistry. The influence of temperature (25-65 °C) and pressure (1-9 bar) on CO2 adsorption capacity was assessed using a volumetric adsorption system. Optimum conditions were obtained at weight percent of 22.6 wt% GO, temperature of 25 °C, and pressure of 9 bar with maximum adsorption capacity of 303.61 mg/g. The incorporation of amino groups enhanced the CO2 adsorption capacity. Isotherm and kinetic analyses indicated that Freundlich and Fractional-order models best described CO2 adsorption behavior. Thermodynamic analysis showed the process was exothermic, spontaneous, and physical, with enthalpy changes of - 16.905 kJ/mol, entropy changes of - 0.030 kJ/mol K, and Gibs changes energy of - 7.904 kJ/mol. Mass transfer diffusion coefficients increased with higher GO loadings. Regenerability tests demonstrated high performance and resilience, with only a 5.79% decrease in efficiency after fifteen cycles. These findings suggest significant potential for these composites in CO2 capture technologies.

Amidation-Reaction Strategy Constructs Versatile Mixed Matrix Composite Membranes towards Efficient Volatile Organic Compounds Adsorption and CO2 Separation

Mixed matrix composite membranes (MMCMs) have shown advantages in reducing VOCs and CO2 emissions. Suitable composite layer, substrate, and good compatibility between the filler and the matrix in the composite layer are critical issues in designing MMCMs. This work develops a high-performance UiO-66-NA@PDMS/MCE for VOCs adsorption and CO2 permea-selectivity, based on a simple and facile fabrication of composite layer using amidation-reaction approach on the substrate. The composite layer shows a continuous morphological appearance without interface voids. This outstanding compatibility interaction between UiO-66-NH2 and PDMS is confirmed by molecular simulations. The Si─O functional group and UiO-66-NH2 in the layer leads to improved VOCs adsorption via active sites, skeleton interaction, electrostatic interaction, and van der Waals force. The layer and ─CONH─ also facilitate CO2 transport. The MMCMs show strong four VOCs adsorption and high CO2 permeance of 276.5 GPU with a selectivity of 36.2. The existence of VOCs in UiO-66-NA@PDMS/MCE increases the polarity and fine-tunes the pore size of UiO-66-NH2, improving the affinity towards CO2 and thus promoting the permea-selectivity for CO2, which is further verified by GCMC and EMD methods. This work is expected to offer a facile composite layer manufacturing method for MMCMs with high VOC adsorption and CO2 permea-selectivity.

Efficient CO2 Capture and Separation in MOFs: Effect from Isoreticular Double Interpenetration

Severe CO2 emissions has posed an increasingly alarming threat, motivating the development of efficient CO2 capture materials, one of the key parts of carbon capture, utilization, and storage (CCUS). In this study, a series of metal-organic frameworks (MOFs) named Sc-X (X = S, M, L) were constructed inspired by recorded MOFs, Zn-BPZ-SA and MFU-4l-Li. The corresponding isoreticular double-interpenetrating MOFs (Sc-X-IDI) were subsequently constructed via the introduction of isoreticular double interpenetration. Grand canonical Monte Carlo (GCMC) simulations were adopted at 298 K and 0.1-1.0 bar to comprehensively evaluate the CO2 capture and separation performances in Sc-X and Sc-X-IDI, with gas distribution, isothermal adsorption heat (Qst), and van der Waals (vdW)/Coulomb interactions. It is showed that isoreticular double interpenetration significantly improved the interactions between adsorbed gases and frameworks by precisely modulating pore sizes, particularly observed in Sc-M and Sc-M-IDI. Specifically, the Qst and Coulomb interactions exhibited a substantial increase, rising from 28.38 and 22.19 kJ mol-1 in Sc-M to 43.52 and 38.04 kJ mol-1 in Sc-M-IDI, respectively, at 298 K and 1.0 bar. Besides, the selectivity of CO2 over CH4/N2 was enhanced from 55.36/107.28 in Sc-M to 3308.61/7021.48 in Sc-M-IDI. However, the CO2 capture capacity is significantly influenced by the pore size. Sc-M, with a favorable pore size, exhibits the highest capture capacity of 15.86 mmol g-1 at 298 K and 1.0 bar. This study elucidated the impact of isoreticular double interpenetration on the CO2 capture performance in MOFs.

Post-Synthetic Surface Modification of Metal-Organic Frameworks and Their Potential Applications

Metal-organic frameworks (MOFs) are porous hybrid materials with countless potential applications. Most of these rely on their porous structure, tunable composition, and the possibility of incorporating and expanding their functions. Although functionalization of the inner surface of MOF crystals has received considerable attention in recent years, methods to functionalize selectively the outer crystal surface of MOFs are developed to a lesser extent, despite their importance. This article summarizes different types of post-synthetic modifications and possible applications of modified materials such as: catalysis, adsorption, drug delivery, mixed matrix membranes, and stabilization of porous liquids.

Graphene-Based Metal-Organic Framework Hybrids for Applications in Catalysis, Environmental, and Energy Technologies

Current energy and environmental challenges demand the development and design of multifunctional porous materials with tunable properties for catalysis, water purification, and energy conversion and storage. Because of their amenability to de novo reticular chemistry, metal-organic frameworks (MOFs) have become key materials in this area. However, their usefulness is often limited by low chemical stability, conductivity and inappropriate pore sizes. Conductive two-dimensional (2D) materials with robust structural skeletons and/or functionalized surfaces can form stabilizing interactions with MOF components, enabling the fabrication of MOF nanocomposites with tunable pore characteristics. Graphene and its functional derivatives are the largest class of 2D materials and possess remarkable compositional versatility, structural diversity, and controllable surface chemistry. Here, we critically review current knowledge concerning the growth, structure, and properties of graphene derivatives, MOFs, and their graphene@MOF composites as well as the associated structure-property-performance relationships. Synthetic strategies for preparing graphene@MOF composites and tuning their properties are also comprehensively reviewed together with their applications in gas storage/separation, water purification, catalysis (organo-, electro-, and photocatalysis), and electrochemical energy storage and conversion. Current challenges in the development of graphene@MOF hybrids and their practical applications are addressed, revealing areas for future investigation. We hope that this review will inspire further exploration of new graphene@MOF hybrids for energy, electronic, biomedical, and photocatalysis applications as well as studies on previously unreported properties of known hybrids to reveal potential "diamonds in the rough".

Self-Assembled CMC/UiO-66-NH2 Membrane with Anti-Crude Oil Adhesion Property for Highly Efficient Oil-Water Separation

Developing the high-anti-fouling membrane has kept continuous attention in oil/water emulsion treatment. However, the majority of works on anti-fouling membranes mainly focused on low-viscosity oils, which greatly limited the development and application of a membrane to face the real crude oil wastewater. Inspired by the hydrophilicity of sodium carboxymethyl cellulose (CMC) and zirconium base metal-organic frame (Zr-MOF), an anti-oil-fouling CMC/UiO-66-NH₂ composite membrane was constructed by a self-assembly method. Profiting from the hydrophilicity and micro-nanostructure of the CMC/UiO-66-NH₂ layer, the obtained CMC/UiO-66-NH₂ membranes displayed underwater superoleophobicity and desired oil resistance. It could display the effective separation capability with 1282 ± 62 to 6160 ± 81 L/(m²·h·bar) and above 99.08% toward the different light oil emulsions. More importantly, the CMC/UiO-66-NH₂ membrane displayed ultralow crude oil adhesion behaviors toward the crude oil emulsions, which could achieve a considerably high flux (746 ± 60 to 5224 ± 87 L/(m²·h·bar)). Furthermore, electrostatic interaction and physical enwinding-wrapping between CMC and UiO-66-NH₂ also endowed the composite membranes with outstanding stability. After immersing the as-prepared membranes into the harsh environments for 24 h, the membranes still maintained high underwater-oil contact angles (UWOCA > 155°) and separation ability (oil rejection was above 99.0%). Therefore, CMC/UiO-66-NH₂ composite membranes could demonstrate promising prospects in real oily emulsion treatment.

Evaluation of CO2 and H2O Adsorption on a Porous Polymer Using DFT and In Situ DRIFT Spectroscopy

Numerous hyper-cross-linked polymers (HCPs) have been developed as CO₂ adsorbents and photocatalysts. Yet, little is known of the CO₂ and H₂O adsorption mechanisms on amorphous porous polymers. Gaining a better understanding of these mechanisms and determining the adsorption sites are key to the rational design of improved adsorbents and photocatalysts. Herein, we present a unique approach that combines density functional theory (DFT), in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and multivariate spectral analysis to investigate CO₂ and H₂O adsorption sites on a triazine-biphenyl HCP. We found that CO₂ and H₂O adsorb on the same HCP sites albeit with different adsorption strengths. The primary amines of the triazines were identified as favoring strong CO₂ binding interactions. Given the potential use of HCPs for CO₂ photoreduction, we also investigated CO₂ and H₂O adsorption under transient light irradiation. Under irradiation, we observed partial CO₂ and H₂O desorption and a redistribution of interactions between the H₂O and CO₂ molecules that remain adsorbed at HCP adsorption sites.

Exploiting the Fracture in Metal-Organic Frameworks: A General Strategy for Bifunctional Atom-Precise Nanocluster/ZIF-8(300 °C) Composites

Atom-precise nanoclusters-metal-organic framework (APNC/MOF) composites, as bifunctional material with well-defined structures, have attracted considerable attention in recent years. Despite the progress made to date, there is an urgent need to develop a generic and scalable approach for all APNCs. Herein, the authors present the Exploiting Fracture Strategy (EFS) and successfully construct a super-stable bifunctional APNC/ZIF-8(300 °C) composite overcoming the limitations of previous strategies in selecting APNCs. The EFS utilizes the fracture of ZnN in ZIF-8 after annealing at 300 °C. This method is suitable for all kinds of S/P protected APNCs with different sizes, including uncharged clusters Au₁ Ag₃₉ , Ag₄₀ , negatively charged Au₁₂ Ag₃₂ , positively charged Ag₄₆ Au₂₄ , Au₄ Cu₄ and P-ligand-protected Pd₃ Cl. Importantly, the generated APNC/MOF show significantly improved performances, for example, the activities of Au₁₂ Ag₃₂ /ZIF-8(300°C), Au₄ Cu₄ /ZIF-8(300°C), and Au₁ Ag₃₉ /ZIF-8(300°C) in the corresponding reactions are higher than those of Au₁₂ Ag₃₂ , Au₄ Cu₄ , and Au₁ Ag₃₉ , respectively. In particular, Au₁₂ Ag₃₂ /ZIF-8(300 °C) shows higher activity than Au₁₂ Ag₃₂ @ZIF-8. Therefore, this work offers guidance for the design of bifunctional APNC/MOF composites with excellent optimization of properties and opens up new horizons for future related nanomaterial studies and nanocatalyst designs.

Current trends in the development of polymer-based monolithic stationary phases

This review focuses on the development and applications of organic polymer monoliths, with special attention to the literature published in 2021. The latest protocols in the preparation of polymer monoliths are discussed. In particular, tailored surface modification using nanomaterials, the development of chiral stationary phases and development of stationary phases for capillary electrochromatography are reviewed. Furthermore, the optimization of pore forming solvents composition is also discussed. Finally, the use of monolithic stationary phases in sample treatment using solid-phase extraction and enrichment methods, molecularly imprinted polymers and enzymatic reactors is mentioned.

Updated results on the integration of metal-organic framework with functional materials toward n-alkane for latent heat retention and reliability

Phase change composites are in high demand in thermal management systems. Various supporting materials, including nanocomposites, have been employed to develop shape-stable phase change materials (PCMs). As the reliability of most composite materials has mostly been studied right after the preparation with specific thermal cycling measurements, it is difficult to analyze the long-term leakage-resistance capability and energy retention capacity. Additionally, achieving multifunctional phase change composites is a significant challenge for single supporting materials. Herein, we provide a follow-up report on the thermal performance of hybrid material-supported n-alkane after a storage time of one year and 50 heating/cooling cycles. The interconnected hybrid material composed of a metal-organic framework (MOF) and graphite improved the shape/thermal stability of tetradecane (TD). The as-synthesized MOF/graphite/TD composites exhibited a high latent heat retention capacity of 84.2%, low leakage rate of 1.25%, and high PCM loading capacity, making them suitable for thermal management applications, such as industrial waste heat recovery systems. Furthermore, the intermolecular interactions and capillary forces between the hybrid materials and TD provided high stability and compatibility. Therefore, the as-prepared hybrid material fabricated in this study can be important in the development of multidirectional composite PCMs with comprehensive thermal characteristics.

Post-synthetic modification of UiO-66-OH toward porous liquids for CO2 capture

A rather simple and feasible strategy to construct MOF porous liquids with low viscosities for CO2 capture.

Influence of ultra-micropore volume of activated carbons prepared from noble mung bean on the adsorption properties of CO2, CH4, and N2

In this study, mung bean-based nanoporous activated carbons with different pore properties were prepared by varying the mass ratio of activating agent (KOH) and activation temperature.

Application of Metal-Organic Framework-Based Composites for Gas Sensing and Effects of Synthesis Strategies on Gas-Sensitive Performance

Gas sensing materials, such as semiconducting metal oxides (SMOx), carbon-based materials, and polymers have been studied in recent years. Among of them, SMOx-based gas sensors have higher operating temperatures; sensors crafted from carbon-based materials have poor selectivity for gases and longer response times; and polymer gas sensors have poor stability and selectivity, so it is necessary to develop high-performance gas sensors. As a porous material constructed from inorganic nodes and multidentate organic bridging linkers, the metal-organic framework (MOF) shows viable applications in gas sensors due to its inherent large specific surface area and high porosity. Thus, compounding sensor materials with MOFs can create a synergistic effect. Many studies have been conducted on composite MOFs with three materials to control the synergistic effects to improve gas sensing performance. Therefore, this review summarizes the application of MOFs in sensor materials and emphasizes the synthesis progress of MOF composites. The challenges and development prospects of MOF-based composites are also discussed.

Preparation of Activated Carbon Doped with Graphene Oxide Porous Materials and Their High Gas Adsorption Performance

It is still a great challenge to develop a new porous carbon adsorbent with excellent separation performance and to recover low-concentration CH₄ in coal mine gas. This work provides a new idea for the study of CH₄ adsorption on activated carbon (AC) composites. Composite materials with microporous structures were prepared from coconut-shell activated carbon (CAC) doped with graphene oxide (GO) by a chemical activation process in this paper. The expansion and dissociation of GO at high temperatures indirectly improve the specific surface area (SSA) of the composite. The interlayer aggregation is reduced, the activation effect is improved, and a new low-cost adsorption material is prepared. The SSA of CAC-50 is more than 3000 m²·g^-1. A high SSA and a narrow pore size distribution lead to a higher total adsorption capacity of CH₄. The breakthrough test also confirmed that AC/GOs had a better adsorption capacity for CH₄. The separation performance of the CH₄/N₂ mixture is not good at room temperature, which is due to the influence of a high SSA and average pore size. As a low-cost and rich material, CAC has a wide range of application prospects. The composite is a potential material for recovering low-concentration CH₄ from the coal mine, which is worthy of attention. In the future, the selectivity of AC/GOs to CH₄ can be increased by loading functional groups or modification.

A green and sustainable approach for the synthesis of 1,5-benzodiazepines and spirooxindoles in one-pot using a MIL-101(Cr) metal–organic framework as a reusable catalyst

Green and efficient protocols for the synthesis of 1,5-benzodiazepines and spirooxindoles were developed utilizing MIL-101(Cr) in SFRC and water as solvent respectively.