Self-Powered Rewritable Electrochromic Display based on WO3-x Film with Mechanochemically Synthesized MoO3-y Nanosheets

The frontier of tungsten oxide nanostructures in electronic applications

Electrochromic (EC) glazing has garnered significant attention recently as a crucial solution for enhancing energy efficiency in future construction and automotive sectors. EC glazing could significantly reduce the energy usage of buildings compared to traditional blinds and glazing. Despite their commercial availability, several challenges remain, including issues with switching time, leakage of electrolytes, production costs, etc. Consequently, these areas demand more attention and further studies. Among inorganic-based EC materials, tungsten oxide nanostructures are essential due to its outstanding advantages such as low voltage demand, high coloration coefficient, large optical modulation range, and stability. This review will summarize the principal design and mechanism of EC device fabrication. It will highlight the current gaps in understanding the mechanism of EC theory, discuss the progress in material development for EC glazing, including various solutions for improving EC materials, and finally, introduce the latest advancements in photo-EC devices that integrate photovoltaic and EC technologies.

Electrochromic Devices Based on 2D MoO3-x/PEDOT:PSS Composite Film with Boosted Ion Transport

Electrochromic materials allow for optical modulation and have attracted much attention due to their bright future in applications such as smart windows and energy-saving displays. Two-dimensional (2D) molybdenum oxide nanoflakes with combined advantages of high active specific surface area and natural layered structure should be highly potential candidates for electrochromic devices. However, the efficient top-down preparation of 2D MoO3 nanoflakes is still a huge challenge and the sluggish ionic kinetics hinder its electrochromic performance. Herein, we demonstrated a feasible thiourea-assisted exfoliation procedure, which can not only increase the yield but also reduce the thickness of 2D MoO3-x nanoflakes down to a few nanometers. Furthermore, electrophoretic-deposited MoO3-x nanoflakes were combined with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)-conjugated polymer to simultaneously enhance the ionic kinetics and electronic conductivity, with a diffusion coefficient of 3.09 × 10-10 cm2 s-1 and a charge transport resistance of 33.7 Ω. The prepared 2D MoO3-x/PEDOT:PSS composite films exhibit improved electrochromic performance, including fast switching speed (7 s for bleaching, 5 s for coloring), enhanced coloration efficiency (87.1 cm2 C-1), and large transmittance modulation (ΔT = 65%). This study shows outstanding potential for 2D MoO3-x nanoflakes in electrochromic applications and opens new avenues for optimizing the ion transport in inorganic-organic composites, which will be possibly inspired for other electrochemical devices.

Compositional Optimization of Sputtered WO3/MoO3 Films for High Coloration Efficiency

Thin films of mixed MoO3 and WO3 were obtained using reactive magnetron sputtering onto ITO-covered glass, and the optimal composition was determined for the best electrochromic (EC) properties. A combinatorial material synthesis approach was applied throughout the deposition experiments, and the samples represented the full composition range of the binary MoO3/WO3 system. The electrochromic characteristics of the mixed oxide films were determined with simultaneous measurement of layer transmittance and applied electric current through the using organic propylene carbonate electrolyte cells in a conventional three-electrode configuration. Coloration efficiency data evaluated from the primary data plotted against the composition displayed a characteristic maximum at around 60% MoO3. Our combinatorial approach allows the localization of the maximum at 5% accuracy.

Temperature Sensors Integrated with an Electrochromic Readout toward Visual Detection

Temperature sensors have attracted great attention for personal health care and disease diagnosis in recent years. However, it is still a great challenge to fabricate reliable and highly sensitive temperature sensors that can convert physiological signals into easily readable signals in a convenient way. Herein, an integrated smart temperature sensor system based on a traditional temperature sensor and electrochromic display is proposed for real-time visual detection of temperature. Significantly, a voltage-regulated electrochromic device (ECD) based on tungsten oxide (WO3) and polyaniline (PANI) as the real-time visualization window was integrated into the platform to provide feedback on the temperature change. The ECD would change its color from green to blue based on the electrical signal of the temperature sensor, resulting in a visualized readout that can be monitored through our naked eye. Additionally, the smart temperature sensor system possesses an extremely durable property and cycle stability, remaining around 90% of the initial value even after 15,000 s continuous cycle. Thus, the novel design and low power consumption advantages make it a good candidate to pave the way for developing interactive wearable electronics and intelligent robots as real-time temperature feedback systems.

Temperature-Dependent Electrochromic Devices for Energy-Saving Dual-Mode Displays

Electrochromic (EC) devices show promising prospects with the increasing demand for energy-efficient and sustainable technologies. Multifunctionality integration is an inevitable characteristic for EC devices to adapt to changing environments. Herein, a dual-mode temperature-dependent EC device is demonstrated for the first time. Combined with the transparent PVA/EG-ZnCl₂ organohydrogel electrolyte, the devices exhibit good EC performances over a wide temperature range (-40 to 40 °C). The evolutions of ion/electron transport kinetics-related indicators with temperature are further explored and simulated to reveal the mechanism of the temperature dependence of EC devices. Significantly, the optimized tungsten oxide-based EC device shows high performances at the extremely low temperature of -40 °C with a large transmittance modulation (80.8% @660 nm) and outstanding optical memory effects (97.3% retention of the initial transmittance modulation after 32 h) without electrical energy consumption. Furthermore, with a perovskite quantum dot photoluminescence film serving as the backlight, the device can switch display modes between emissive and reflective to realize its functionality in bright or dark conditions. This work provides a broad application prospect for EC devices in diverse environments of light (bright/dark) and temperature (hot/cold).

Review on recent progress in WO3-based electrochromic films: preparation methods and performance enhancement strategies

Transition metal oxides have drawn tremendous interest due to their unique physical and chemical properties. As one of the most promising electrochromic (EC) materials, tungsten trioxide (WO₃) has attracted great attention due to its exceptional EC characteristics. This review summarizes the background and general concept of EC devices, and key criteria for evaluation of WO₃-based EC materials. Special focus is placed on preparation techniques and performance enhancement of WO₃ EC films. Specifically, four methods - nanostructuring, regulating crystallinity, fabricating hybrid films, and preparing multilayer composite structures - have been developed to enhance the EC performance of WO₃ films. Finally, we offer some important recommendations and perspectives on potential research directions for further study.

A Review on Mechanochemistry: Approaching Advanced Energy Materials with Greener Force

Mechanochemistry with solvent-free and environmentally friendly characteristics is one of the most promising alternatives to traditional liquid-phase-based reactions, demonstrating epoch-making significance in the realization of different types of chemistry. Mechanochemistry utilizes mechanical energy to promote physical and chemical transformations to design complex molecules and nanostructured materials, encourage dispersion and recombination of multiphase components, and accelerate reaction rates and efficiencies via highly reactive surfaces. In particular, mechanochemistry deserves special attention because it is capable of endowing energy materials with unique characteristics and properties. Herein, the latest advances and progress in mechanochemistry for the preparation and modification of energy materials are reviewed. An outline of the basic knowledge, methods, and characteristics of different mechanochemical strategies is presented, distinguishing this review from most mechanochemistry reviews that only focus on ball-milling. Next, this outline is followed by a detailed and insightful discussion of mechanochemistry-involved energy conversion and storage applications. The discussion comprehensively covers aspects of energy transformations from mechanical/optical/chemical energy to electrical energy. Finally, next-generation advanced energy materials are proposed. This review is intended to bring mechanochemistry to the frontline and guide this burgeoning field of interdisciplinary research for developing advanced energy materials with greener mechanical force.

Towards two-dimensional color tunability of all-solid-state electrochromic devices using carbon dots

Electrochromic devices (ECDs) that display multicolor patterns have gradually attracted widespread attention. Considering the complexity in the integration of various electrochromic materials and multi-electrode configurations, the design of multicolor patterned ECDs based on simple approaches is still a big challenge. Herein, it is demonstrated vivid ECDs with broadened color hues via introducing carbon dots (CDs) into the ion electrolyte layer. Benefiting from the synergistic effect of electrodes and electrolytes, the resultant ECDs presented a rich color change. Significantly, the fabricated ECDs can still maintain a stable and reversible color change even in high temperature environments where operating temperatures are constantly changing from RT to 70°C. These findings represent a novel strategy for fabricating multicolor electrochromic displays and are expected to advance the development of intelligent and portable electronics.

Extraordinarily Stable Aqueous Electrochromic Battery Based on Li4Ti5O12 and Hybrid Al3+/Zn2+ Electrolyte

Aqueous electrochromic battery (ECB) is a multifunctional technology that shows great potential in various applications including energy-saving buildings and wearable batteries with visible energy levels. However, owing to the mismatch between traditional electrochromic materials and the electrolyte, aqueous ECBs generally exhibit poor cycling stability which bottlenecks their practical commercialization. Herein, we present an ultrastable electrochromic system composed of lithium titanate (Li₄Ti₅O₁₂, LTO) electrode and Al³⁺/Zn²⁺ hybrid electrolyte. The fully compatible system exhibits excellent redox reaction reversibility, thus leading to extremely high cycling stabilities in optical contrast (12 500 cycles with unnoticeable degradation) and energy storage (4000 cycles with 82.6% retention of capacity), superior electrochromic performances including high optical contrast (∼74.73%) and fast responses (4.35 s/7.65 s for bleaching/coloring), as well as excellent discharge areal capacity of 151.94 mAh m^-2. The extraordinary cycling stability can be attributed to the robust [TiO₆] octahedral frameworks which remain chemically active even upon the gradual substitution of Li⁺ with Al³⁺ in LTO over multiple operation cycles. The high-performance electrochromic system demonstrated here not only makes the commercialization of low-cost, high-safety aqueous-based electrochromic devices possible but also provides potential design guidance for LTO-related materials used in aqueous-based energy storage devices.

Determination of W(V) in WO3 Photochromism Using Localized Surface Plasmon Resonance of Ag Nanoparticles

A reversible color change of WO₃ has been widely studied to develop new energy-saving technologies such as smart windows, rewritable paper, and information displays. A blue coloration arises from the intervalence charge transfer between W(VI) and W(V), which is partially formed by the reduction of WO₃ under UV light or an applied voltage. This means that WO₃ has a mixed-valence state of W(V) and W(VI) upon the reduction. However, despite many studies for various applications, how many W(V) atoms are formed and contribute to the intervalence charge transfer (IVCT) transition remains unclear because W(V) formed in WO₃ cannot be determined quantitatively. We determined the amount of the photogenerated W(V) in an aqueous WO₃ colloidal solution containing ethylene glycol (EG) by observing the localized surface plasmon resonance (LSPR) peaks of Ag nanoparticles which were produced by a redox reaction between W(V) and Ag⁺. EG acted as a hole scavenger to suppress the recombination between the photogenerated holes and electrons. First, we explored the reaction condition where only the IVCT transition was observed under UV irradiation, and then it decreased in response to the increase in the LSPR peak in the dark. Under such a condition, the absorbance at 775 nm (A₇₇₅) due to the IVCT transition was observed after the UV irradiation for 30 s, and the absorbance at 410 nm (A₄₁₀) due to the LSPR absorption was obtained when A₇₇₅ completely disappeared in the dark. Experiments were performed at various UV intensities to confirm a proportional relationship between A₇₇₅ and A₄₁₀. Electron spin resonance measurements revealed that A₇₇₅ was proportional to the amount of W(V). Furthermore, Ag nanoparticles were synthesized by a polyol reduction method to obtain the relationship between the LSPR peak intensity and the Ag⁺ concentration, which was consumed for the formation of Ag. On the basis of all of these relationships, A₇₇₅ of 1.669 corresponded to 2.53 × 10^-4 mol dm^-3 W(V), which was estimated to be only 0.21% of 0.12 mol dm^-3 WO₃ used in this study, and the molar absorption coefficient for the IVCT transition between W(V) and W(VI) was evaluated to be 6.85 × 10³ dm³ mol^-1 cm^-1.

Emerging Electrochromic Materials and Devices for Future Displays

With the rapid development of optoelectronic fields, electrochromic (EC) materials and devices have received remarkable attention and have shown attractive potential for use in emerging wearable and portable electronics, electronic papers/billboards, see-through displays, and other new-generation displays, due to the advantages of low power consumption, easy viewing, flexibility, stretchability, etc. Despite continuous progress in related fields, determining how to make electrochromics truly meet the requirements of mature displays (e.g., ideal overall performance) has been a long-term problem. Therefore, the commercialization of relevant high-quality products is still in its infancy. In this review, we will focus on the progress in emerging EC materials and devices for potential displays, including two mainstream EC display prototypes (segmented displays and pixel displays) and their commercial applications. Among these topics, the related materials/devices, EC performance, construction approaches, and processing techniques are comprehensively disscussed and reviewed. We also outline the current barriers with possible solutions and discuss the future of this field.

Enhanced Contrast of WO3-Based Smart Windows by Continuous Li-Ion Insertion and Metal Electroplating

The electrochromic WO₃ smart window based on an aqueous electrolyte shows an excellent liquid/solid interface and thus can achieve a fast electrochromic response, while the aqueous electrolyte has a limited electrochemical window, which probably induces the H⁺ reduction and degrades the practical application. Here, we propose a strategy to modify the traditional Li⁺ acidic aqueous electrolyte by adding some selective inert metal ions, which not only improve the electrochromic performance but also avoid the possible production of hydrogen bubbles due to the broadened electrochemical window. Furthermore, reversible electroplating of inert metal ions will occur, leading to an enhanced optical transmission change of up to 77.5% at 500 nm and 70.4% at 700 nm. This combination of Li-ion insertion and metal electroplating in the ESW device makes it superior to all of the previous reports. The device also demonstrates high stability and high electrochromic efficiency after 1000 cycles. The current study not only emphasizes the rational design for aqueous electrolytes but also demonstrates a practical way to realize an excellent electrochromic window for practical applications.

Recent Advances in Inorganic Electrochromic Materials from Synthesis to Applications: Critical Review on Functional Chemistry and Structure Engineering

For the assembly of electrochromic devices (ECDs) generally with multilayer structures, supportive components usually are needed to be incorporated with EC materials. The reasonable project and development of ECDs will achieve broad expected applications. In this study, we reviewed several impressive methods to design and fabricate ECDs with high-performance and versatility based on recent frontier research. The first part of the review is centered on the desirability and strengthening mechanism of nanostructured inorganic EC materials. The second part illustrates the recent advances in transparent conductors. We then summarize the demands and means to modify the formation of electrolytes for practicable ECDs. Moreover, efforts to increase the compatibility with the EC layer and ion capacity are delineated. In the end, the application prospects of inorganic ECDs are further explored, which offers a guideline for the industrialization process of ECDs.

Wide-Spectrum Modulated Electrochromic Smart Windows Based on MnO2/PB Films

Inorganic materials have been extensively studied for visible electrochromism in the past few decades. However, the single inorganic electrochromic (EC) material commonly exhibits a single color change, leading to a narrow spectrum of modulation, which offsets or limits the maximally energy-saving ability. Here, we present a wide-spectrum modulated EC device designed by combining the complementary EC nanocomposite of manganese dioxide (MnO₂) and Prussian blue (PB) for enhanced energy savings. Porous MnO₂ nanostructures serve as host frameworks for the templated growth of PB, resulting in MnO₂/PB nanocomposites. The complementary optical modulation ranges of MnO₂ and PB enable a widen-spectrum modulation across the solar region with the development of the MnO₂/PB nanocomposite. The colored MnO₂/PB device exhibited an optical modulation of 32.1% in the wide solar spectrum range of 320-1100 nm and blocked 72.0% of the solar irradiance. Furthermore, fast switching responses (2.7 s for coloration and 2.1 s for bleaching) and a high coloration efficiency (83.1 cm²·C^-1) of the MnO₂/PB EC device are also achieved. The high EC performance of the MnO₂/PB nanocomposite device provides a new strategy for the design of high-performance energy-saving EC smart windows.

Self-Driven Infrared Electrochromic Device with Tunable Optical and Thermal Management

Electrochromic devices (ECDs) exhibiting tunable optical and thermal modulation in the infrared (IR) region have attracted extensive attention in recent years due to their attractive application prospects in both military and civilian settings. However, considering the continuous energy supply needed for driving the device operation, it is desired to develop advanced IR-ECDs with low energy consumption. Herein, a flexible self-driven IR-ECD is constructed for achieving variable optical and thermal management in a low-energy mode. In this device, a built-in potential difference of 1.36 V exists between the EC polyaniline cathode and the aluminum foil anode. Consequently, there is a rapid and obvious increase in the IR reflectance of the device after connecting the two electrodes. Such a self-driven reflectance contrast is over 20% at the wavelength of 1500 nm, and the coloration efficiency of the device reaches up to 93.6 cm² C^-1. Meanwhile, the maximum apparent temperature modulation on the surface of the device reaches up to 5.6 °C. Then, the self-driven IR-ECD could recover to its original state driven by a solar cell, indicating good reversibility and stability. We anticipate that this work may provide a new insight into developing advanced self-driven IR-ECDs for applications in dynamic military camouflage and commercial thermal control.

Electrochromic Metamaterials of Metal-Dielectric Stacks for Multicolor Displays with High Color Purity

Inorganic electrochromic (EC) materials with vibrant multicolor change that are compatible with large-scale processing have been at the forefront of EC technology and are crucial in a wide range of applications, such as displays and camouflage. However, limited strategies are available to realize such inorganic materials, and challenges such as low color purity are yet to be overcome. Here, we demonstrate multilayered metal-dielectric metamaterials (MMDMs) as a new family of inorganics-based EC materials to achieve dynamic alternation among multicolors with high contrast and high color purity, which are structurally realized by significantly enhancing the confinement of the incident light in specific optical frequencies. This multilayer structure renders high reflectivity (75%), high quality factor (7.4), and a full width at half-maximum of 60 nm before coloration and presents a color gamut at least 40% wider than that of previously reported metamaterials after coloration, indicating good color quality.